Add HID_QUIRK_MULTI_INPUT for UC-Logik tablet.

$ lsusb
...
Bus 004 Device 002: ID 5543:0003 UC-Logic Technology Corp. Genius MousePen 4x3 Tablet/Aquila L1 Tablet
Signed-off-by: Andrej Gelenberg <andrej.gelenberg@udo.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Ask the HID core not to register an input device for the mouse.
Fix an oops after removing the device, due to leaving the new
input device registered.
Signed-off-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (41 commits)
  HID: usbhid: initialize interface pointers early enough
  HID: extend mask for BUTTON usage page
  HID: hid-ntrig: Single touch mode tap
  HID: hid-ntrig: multitouch cleanup and fix
  HID: n-trig: remove unnecessary tool switching
  HID: hid-ntrig add multi input quirk and clean up
  HID: usbhid: introduce timeout for stuck ctrl/out URBs
  HID: magicmouse: coding style and probe failure fixes
  HID: remove MODULE_VERSION from new drivers
  HID: fix up Kconfig entry for MagicMouse
  HID: add a device driver for the Apple Magic Mouse.
  HID: Export hid_register_report
  HID: Support for MosArt multitouch panel
  HID: add pressure support for the Stantum multitouch panel
  HID: fixed bug in single-touch emulation on the stantum panel
  HID: fix typo in error message
  HID: add mapping for "AL Network Chat" usage
  HID: use multi input quirk for TouchPack touchscreen
  HID: make full-fledged hid-bus drivers properly selectable
  HID: make Wacom modesetting failures non-fatal
  ...

Conflicts:
	drivers/hid/Kconfig

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (44 commits)
  Add MAINTAINERS entry for virtio_console
  virtio: console: Fill ports' entire in_vq with buffers
  virtio: console: Error out if we can't allocate buffers for control queue
  virtio: console: Add ability to remove module
  virtio: console: Ensure no memleaks in case of unused buffers
  virtio: console: show error message if hvc_alloc fails for console ports
  virtio: console: Add debugfs files for each port to expose debug info
  virtio: console: Add ability to hot-unplug ports
  virtio: console: Handle port hot-plug
  virtio: console: Remove cached data on port close
  virtio: console: Register with sysfs and create a 'name' attribute for ports
  virtio: console: Ensure only one process can have a port open at a time
  virtio: console: Add file operations to ports for open/read/write/poll
  virtio: console: Associate each port with a char device
  virtio: console: Prepare for writing to userspace buffers
  virtio: console: Add a new MULTIPORT feature, support for generic ports
  virtio: console: Introduce a send_buf function for a common path for sending data to host
  virtio: console: Introduce function to hand off data from host to readers
  virtio: console: Separate out find_vqs operation into a different function
  virtio: console: Separate out console init into a new function
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  netlabel: fix export of SELinux categories > 127

This fixes corrupted CIPSO packets when SELinux categories greater than 127
are used.  The bug occured on the second (and later) loops through the
while; the inner for loop through the ebitmap->maps array used the same
index as the NetLabel catmap->bitmap array, even though the NetLabel bitmap
is twice as long as the SELinux bitmap.
Signed-off-by: Joshua Roys <joshua.roys@gtri.gatech.edu>
Acked-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI

Mike Cui reported that his system with an NVIDIA MCP79 (aka MCP7A)
chipset stopped working with 2.6.32. The problem appears to be that
2.6.32 now enables the FPDMA auto-activate optimization in the ahci
driver. The drive works fine with this enabled on an Intel AHCI so
this appears to be a chipset bug.  Since MCP79 is a fairly recent
NVIDIA chipset and we don't have any info on whether any other NVIDIA
chipsets have this issue, disable FPDMA AA optimization on all NVIDIA
AHCI controllers for now.

Should address http://bugzilla.kernel.org/show_bug.cgi?id=14922Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
While-we-investigate-issue-this-patch-looks-good-to-me-by: Prajakta Gudadhe <pgudadhe@nvidia.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: stable@kernel.org

If radix_tree_preload is failed in ima_inode_alloc, we don't need
radix_tree_preload_end because kernel is alread preempt enabled
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: Set PCI CLS early in boot.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix broken sn2 build

Set the PCI CLS early in the boot process to prevent
device failures. In pcibios_set_master use the new
pci_cache_line_size instead of a hard-coded value.
Signed-off-by: Carlos O'Donell <carlos@codesourcery.com>
Reviewed-by: Grant Grundler <grundler@google.com>
Signed-off-by: Kyle McMartin <kyle@redhat.com>

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix out_le32() macro
  microblaze: Fix cache loop function for cache range

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Revert "block: improve queue_should_plug() by looking at IO depths"

Trailing semicolon causes compilation involving out_le32() to fail.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

I create wrong asm code but none test shows that this part of code is wrong.
I am not convinces that were good idea to create asm optimized macros
for caches. The reason is that there is not optimization with previous code
that's why make sense to add old code and do some benchmarking which
functions are faster.
Signed-off-by: Michal Simek <monstr@monstr.eu>

I'm taking ownership of the virtio_console module; but I'll continue
feeding patches via Rusty.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Instead of allocating just one buffer for a port's in_vq, fill
the entire in_vq with buffers so the host need not stall while
an application consumes the data and makes the buffer available
again for the host.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

With MULTIPORT support, the control queue is an integral part of the
functioning of the device. If we can't get any buffers allocated, the
host won't be able to relay important information and the device may not
function as intended.

Ensure 'probe' doesn't succeed until the control queue has at least one
buffer allocated for its ivq.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Add the ability to remove the virtio_console module.

This aids debugging.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

If unused data exists in in_vq, ensure we flush that first and then
detach unused buffers, which will ensure all buffers from the in_vq are
removed.

Also ensure we free the buffers after detaching them.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

This is helpful in examining ports' state.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Remove port data; deregister from the hvc core if it's a console port.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

If the 'nr_ports' variable in the config space is updated to a higher
value, that means new ports have been hotplugged.

Introduce a new workqueue to handle such updates and create new ports.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Remove any data that we might have in a port's inbuf when closing a port
or when any data is received when a port is closed.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

The host can set a name for ports so that they're easily discoverable
instead of going by the /dev/vportNpn naming. This attribute will be
placed in /sys/class/virtio-ports/vportNpn/name. udev scripts can then
create symlinks to the port using the name.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Add a guest_connected field that ensures only one process
can have a port open at a time.

This also ensures we don't have a race when we later add support for
dropping buffers when closing the char dev and buffer caching is turned
off for the particular port.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Allow guest userspace applications to open, read from, write to, poll
the ports via the char dev interface.

When a port gets opened, a notification is sent to the host via a
control message indicating a connection has been established. Similarly,
on closing of the port, a notification is sent indicating disconnection.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

The char device will be used as an interface by applications on the
guest to communicate with apps on the host.

The devices created are placed in /dev/vportNpn where N is the
virtio-console device number and n is the port number for that device.

One dynamic major device number is allocated for each device and minor
numbers are allocated for the ports contained within that device.

The file operation for the char devs will be added in the following
commits.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

When ports get advertised as char devices, the buffers will come from
userspace. Equip the fill_readbuf function with the ability to write
to userspace buffers.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

This commit adds a new feature, MULTIPORT. If the host supports this
feature as well, the config space has the number of ports defined for
that device. New ports are spawned according to this information.

The config space also has the maximum number of ports that can be
spawned for a particular device. This is useful in initializing the
appropriate number of virtqueues in advance, as ports might be
hot-plugged in later.

Using this feature, generic ports can be created which are not tied to
hvc consoles.

We also open up a private channel between the host and the guest via
which some "control" messages are exchanged for the ports, like whether
the port being spawned is a console port, resizing the console window,
etc.

Next commits will add support for hotplugging and presenting char
devices in /dev/ for bi-directional guest-host communication.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Adding support for generic ports that will write to userspace will need
some code changes.

Consolidate the write routine into send_buf() and put_chars() now just
calls into the new function.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

In preparation for serving data to userspace (generic ports) as well as
in-kernel users (hvc consoles), separate out the functionality common to
both in a 'fill_readbuf()' function.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

With support for multiple ports, each port will have its own input and
output vqs. Prepare the probe function for this change.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Console ports could be hot-added. Also, with the new multiport support,
a port is identified as a console port only if the host sends a control
message.

Move the console port init into a separate function so it can be invoked
from other places.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Move out console-specific stuff into a separate struct from 'struct
port' as we need to maintain two lists: one for all the ports (which
includes consoles) and one only for consoles since the hvc callbacks
only give us the vtermno.

This makes console handling cleaner.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

When multiple console support is added, ensure each port's size gets
updated when a new one is opened via hvc.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>