Skip to content

L
linux
Switch branch/tag
  1. 02 Aug, 2010 7 commits
    • Sripathi Kodi's avatar
      9p: getattr client implementation for 9P2000.L protocol. · f0853122
      Sripathi Kodi authored 
              SYNOPSIS

              size[4] Tgetattr tag[2] fid[4] request_mask[8]

              size[4] Rgetattr tag[2] lstat[n]

           DESCRIPTION

              The getattr transaction inquires about the file identified by fid.
              request_mask is a bit mask that specifies which fields of the
              stat structure is the client interested in.

              The reply will contain a machine-independent directory entry,
              laid out as follows:

                 st_result_mask[8]
                    Bit mask that indicates which fields in the stat structure
                    have been populated by the server

                 qid.type[1]
                    the type of the file (directory, etc.), represented as a bit
                    vector corresponding to the high 8 bits of the file's mode
                    word.

                 qid.vers[4]
                    version number for given path

                 qid.path[8]
                    the file server's unique identification for the file

                 st_mode[4]
                    Permission and flags

                 st_uid[4]
                    User id of owner

                 st_gid[4]
                    Group ID of owner

                 st_nlink[8]
                    Number of hard links

                 st_rdev[8]
                    Device ID (if special file)

                 st_size[8]
                    Size, in bytes

                 st_blksize[8]
                    Block size for file system IO

                 st_blocks[8]
                    Number of file system blocks allocated

                 st_atime_sec[8]
                    Time of last access, seconds

                 st_atime_nsec[8]
                    Time of last access, nanoseconds

                 st_mtime_sec[8]
                    Time of last modification, seconds

                 st_mtime_nsec[8]
                    Time of last modification, nanoseconds

                 st_ctime_sec[8]
                    Time of last status change, seconds

                 st_ctime_nsec[8]
                    Time of last status change, nanoseconds

                 st_btime_sec[8]
                    Time of creation (birth) of file, seconds

                 st_btime_nsec[8]
                    Time of creation (birth) of file, nanoseconds

                 st_gen[8]
                    Inode generation

                 st_data_version[8]
                    Data version number

              request_mask and result_mask bit masks contain the following bits
                 #define P9_STATS_MODE          0x00000001ULL
                 #define P9_STATS_NLINK         0x00000002ULL
                 #define P9_STATS_UID           0x00000004ULL
                 #define P9_STATS_GID           0x00000008ULL
                 #define P9_STATS_RDEV          0x00000010ULL
                 #define P9_STATS_ATIME         0x00000020ULL
                 #define P9_STATS_MTIME         0x00000040ULL
                 #define P9_STATS_CTIME         0x00000080ULL
                 #define P9_STATS_INO           0x00000100ULL
                 #define P9_STATS_SIZE          0x00000200ULL
                 #define P9_STATS_BLOCKS        0x00000400ULL

                 #define P9_STATS_BTIME         0x00000800ULL
                 #define P9_STATS_GEN           0x00001000ULL
                 #define P9_STATS_DATA_VERSION  0x00002000ULL

                 #define P9_STATS_BASIC         0x000007ffULL
                 #define P9_STATS_ALL           0x00003fffULL

        This patch implements the client side of getattr implementation for
        9P2000.L. It introduces a new structure p9_stat_dotl for getting
        Linux stat information along with QID. The data layout is similar to
        stat structure in Linux user space with the following major
        differences:

        inode (st_ino) is not part of data. Instead qid is.

        device (st_dev) is not part of data because this doesn't make sense
        on the client.

        All time variables are 64 bit wide on the wire. The kernel seems to use
        32 bit variables for these variables. However, some of the architectures
        have used 64 bit variables and glibc exposes 64 bit variables to user
        space on some architectures. Hence to be on the safer side we have made
        these 64 bit in the protocol. Refer to the comments in
        include/asm-generic/stat.h

        There are some additional fields: st_btime_sec, st_btime_nsec, st_gen,
        st_data_version apart from the bitmask, st_result_mask. The bit mask
        is filled by the server to indicate which stat fields have been
        populated by the server. Currently there is no clean way for the
        server to obtain these additional fields, so it sends back just the
        basic fields.
Signed-off-by: default avatarSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: default avatarEric Van Hensbegren <ericvh@gmail.com>
      f0853122
    • Aneesh Kumar K.V's avatar
      fs/9p: Pass the correct user credentials during attach · 9ffaf63e
      Aneesh Kumar K.V authored 
      We need to make sure we pass the right uid value
during attach. dotl is similar to dotu in this regard.
Without this mapped security model on dotl doesn't work
Signed-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: default avatarEric Van Hensbergen <ericvh@gmail.com>
      9ffaf63e
    • Aneesh Kumar K.V's avatar
      net/9p: Handle the server returned error properly · 69d4b443
      Aneesh Kumar K.V authored 
      We need to get the negative errno value in the kernel
even for dotl.
Signed-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: default avatarEric Van Hensbergen <ericvh@gmail.com>
      69d4b443
    • Sripathi Kodi's avatar
      9p: readdir implementation for 9p2000.L · 7751bdb3
      Sripathi Kodi authored 
      This patch implements the kernel part of readdir() implementation for 9p2000.L

    Change from V3: Instead of inode, server now sends qids for each dirent

    SYNOPSIS

    size[4] Treaddir tag[2] fid[4] offset[8] count[4]
    size[4] Rreaddir tag[2] count[4] data[count]

    DESCRIPTION

    The readdir request asks the server to read the directory specified by 'fid'
    at an offset specified by 'offset' and return as many dirent structures as
    possible that fit into count bytes. Each dirent structure is laid out as
    follows.

            qid.type[1]
              the type of the file (directory, etc.), represented as a bit
              vector corresponding to the high 8 bits of the file's mode
              word.

            qid.vers[4]
              version number for given path

            qid.path[8]
              the file server's unique identification for the file

            offset[8]
              offset into the next dirent.

            type[1]
              type of this directory entry.

            name[256]
              name of this directory entry.

    This patch adds v9fs_dir_readdir_dotl() as the readdir() call for 9p2000.L.
    This function sends P9_TREADDIR command to the server. In response the server
    sends a buffer filled with dirent structures. This is different from the
    existing v9fs_dir_readdir() call which receives stat structures from the server.
    This results in significant speedup of readdir() on large directories.
    For example, doing 'ls >/dev/null' on a directory with 10000 files on my
    laptop takes 1.088 seconds with the existing code, but only takes 0.339 seconds
    with the new readdir.
Signed-off-by: default avatarSripathi Kodi <sripathik@in.ibm.com>
Reviewed-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: default avatarEric Van Hensbergen <ericvh@gmail.com>
      7751bdb3
    • M. Mohan Kumar's avatar
      9p: Make use of iounit for read/write · 97e8442b
      M. Mohan Kumar authored 
      Change the v9fs_file_readn function to limit the maximum transfer size
based on the iounit or msize.

Also remove the redundant check for limiting the transfer size in
v9fs_file_write. This check is done by p9_client_write.
Signed-off-by: default avatarM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: default avatarEric Van Hensbergen <ericvh@gmail.com>
      97e8442b
    • Dan Carpenter's avatar
      9p: strlen() doesn't count the terminator · cff6b8a9
      Dan Carpenter authored 
      This is an off by one bug because strlen() doesn't count the NULL
terminator.  We strcpy() addr into a fixed length array of size
UNIX_PATH_MAX later on.

The addr variable is the name of the device being mounted.
Signed-off-by: default avatarDan Carpenter <error27@gmail.com>
Signed-off-by: default avatarEric Van Hensbergen <ericvh@gmail.com>
      cff6b8a9
    • Fang Wenqi's avatar
      virtio_9p.h needs <linux/types.h> · b126468e
      Fang Wenqi authored 
      Found with makes headers_check:
include/linux/virtio_9p.h:15: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: default avatarFang Wenqi <antonf@turbolinux.com.cn>
Signed-off-by: default avatarEric Van Hensbergen <ericvh@gmail.com>
      b126468e
  3. 01 Aug, 2010 2 commits
  5. 31 Jul, 2010 5 commits
  7. 30 Jul, 2010 8 commits
  9. 29 Jul, 2010 18 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7