Pull EFI fix from Ard Biesheuvel:
 "This works around a shortcoming in the memory acceptation API, which
  may apparently hog the CPU for long enough to trigger the softlockup
  watchdog.

  Note that this only affects confidential VMs running under the Intel
  TDX hypervisor, which is why I accepted this for now, but this should
  obviously be fixed properly in the future"

* tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/unaccepted: touch soft lockup during memory accept

Pull block fixes from Jens Axboe:
 "Nothing major in here - an nvme pull request with mostly auth/tcp
  fixes, and a single fix for ublk not setting segment count and size
  limits"

* tag 'block-6.9-20240503' of git://git.kernel.dk/linux:
  nvme-tcp: strict pdu pacing to avoid send stalls on TLS
  nvmet: fix nvme status code when namespace is disabled
  nvmet-tcp: fix possible memory leak when tearing down a controller
  nvme: cancel pending I/O if nvme controller is in terminal state
  nvmet-auth: replace pr_debug() with pr_err() to report an error.
  nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
  nvme: find numa distance only if controller has valid numa id
  ublk: remove segment count and size limits
  nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH

Pull sound fixes from Takashi Iwai:
 "As usual in a late stage, we received a fair amount of fixes for ASoC,
  and it became bigger than wished. But all fixes are rather device-
  specific, and they look pretty safe to apply.

  A major par of changes are series of fixes for ASoC meson and SOF
  drivers as well as for Realtek and Cirrus codecs. In addition, recent
  emu10k1 regression fixes and usual HD-audio quirks are included"

* tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
  ALSA: hda/realtek: Fix build error without CONFIG_PM
  ALSA: hda/realtek: Fix conflicting PCI SSID 17aa:386f for Lenovo Legion models
  ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318
  ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()
  ALSA: hda: intel-dsp-config: harden I2C/I2S codec detection
  ASoC: cs35l56: fix usages of device_get_named_child_node()
  ASoC: da7219-aad: fix usage of device_get_named_child_node()
  ASoC: meson: cards: select SND_DYNAMIC_MINORS
  ASoC: meson: axg-tdm: add continuous clock support
  ASoC: meson: axg-tdm-interface: manage formatters in trigger
  ASoC: meson: axg-card: make links nonatomic
  ASoC: meson: axg-fifo: use threaded irq to check periods
  ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU
  ALSA: emu10k1: make E-MU FPGA writes potentially more reliable
  ALSA: emu10k1: fix E-MU dock initialization
  ALSA: emu10k1: use mutex for E-MU FPGA access locking
  ALSA: emu10k1: move the whole GPIO event handling to the workqueue
  ALSA: emu10k1: factor out snd_emu1010_load_dock_firmware()
  ALSA: emu10k1: fix E-MU card dock presence monitoring
  ASoC: rt715-sdca: volume step modification
  ...

Pull drm fixes from Dave Airlie:
 "Weekly fixes, mostly made up from amdgpu and some panel changes.

  Otherwise xe, nouveau, vmwgfx and a couple of others, all seems pretty
  on track.

  amdgpu:
   - Fix VRAM memory accounting
   - DCN 3.1 fixes
   - DCN 2.0 fix
   - DCN 3.1.5 fix
   - DCN 3.5 fix
   - DCN 3.2.1 fix
   - DP fixes
   - Seamless boot fix
   - Fix call order in amdgpu_ttm_move()
   - Fix doorbell regression
   - Disable panel replay temporarily

  amdkfd:
   - Flush wq before creating kfd process

  xe:
   - Fix UAF on rebind worker
   - Fix ADL-N display integration

  imagination:
   - fix page-count macro

  nouveau:
   - avoid page-table allocation failures
   - fix firmware memory allocation

  panel:
   - ili9341: avoid OF for device properties; respect deferred probe;
     fix usage of errno codes

  ttm:
   - fix status output

  vmwgfx:
   - fix legacy display unit
   - fix read length in fence signalling"

* tag 'drm-fixes-2024-05-03' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
  drm/xe/display: Fix ADL-N detection
  drm/panel: ili9341: Use predefined error codes
  drm/panel: ili9341: Respect deferred probe
  drm/panel: ili9341: Correct use of device property APIs
  drm/xe/vm: prevent UAF in rebind_work_func()
  drm/amd/display: Disable panel replay by default for now
  drm/amdgpu: fix doorbell regression
  drm/amdkfd: Flush the process wq before creating a kfd_process
  drm/amd/display: Disable seamless boot on 128b/132b encoding
  drm/amd/display: Fix DC mode screen flickering on DCN321
  drm/amd/display: Add VCO speed parameter for DCN31 FPU
  drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2
  drm/amd/display: Allocate zero bw after bw alloc enable
  drm/amd/display: Fix incorrect DSC instance for MST
  drm/amd/display: Atom Integrated System Info v2_2 for DCN35
  drm/amd/display: Add dtbclk access to dcn315
  drm/amd/display: Ensure that dmcub support flag is set for DCN20
  drm/amd/display: Handle Y carry-over in VCP X.Y calculation
  drm/amdgpu: Fix VRAM memory accounting
  drm/vmwgfx: Fix invalid reads in fence signaled events
  ...

Pull spi fixes from Mark Brown:
 "A few small fixes for v6.9,

  The core fix is for issues with reuse of a spi_message in the case
  where we've got queued messages (a relatively rare occurrence with
  modern code so it wasn't noticed in testing).

  We also avoid an issue with the Kunpeng driver by simply removing the
  debug interface that could trigger it, and address issues with
  confusing and corrupted output when printing the IP version of the AXI
  SPI engine"

* tag 'spi-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fix null pointer dereference within spi_sync
  spi: hisi-kunpeng: Delete the dump interface of data registers in debugfs
  spi: axi-spi-engine: fix version format string

Merge tag 'drm-misc-fixes-2024-05-02' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

Short summary of fixes pull:

imagination:
- fix page-count macro

nouveau:
- avoid page-table allocation failures
- fix firmware memory allocation

panel:
- ili9341: avoid OF for device properties; respect deferred probe; fix
usage of errno codes

ttm:
- fix status output

vmwgfx:
- fix legacy display unit
- fix read length in fence signalling
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502192117.GA12158@linux.fritz.box

- Fix UAF on rebind worker
- Fix ADL-N display integration
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6bontwst3mbxozs6u3ad5n3g5zmaucrngbfwv4hkfhpscnwlym@wlwjgjx6pwue

Merge tag 'amd-drm-fixes-6.9-2024-05-01' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.9-2024-05-01:

amdgpu:
- Fix VRAM memory accounting
- DCN 3.1 fixes
- DCN 2.0 fix
- DCN 3.1.5 fix
- DCN 3.5 fix
- DCN 3.2.1 fix
- DP fixes
- Seamless boot fix
- Fix call order in amdgpu_ttm_move()
- Fix doorbell regression
- Disable panel replay temporarily

amdkfd:
- Flush wq before creating kfd process
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240501135054.1919108-1-alexander.deucher@amd.com

Pull btrfs fixes from David Sterba:

 - set correct ram_bytes when splitting ordered extent. This can be
   inconsistent on-disk but harmless as it's not used for calculations
   and it's only advisory for compression

 - fix lockdep splat when taking cleaner mutex in qgroups disable ioctl

 - fix missing mutex unlock on error path when looking up sys chunk for
   relocation

* tag 'for-6.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: set correct ram_bytes when splitting ordered extent
  btrfs: take the cleaner_mutex earlier in qgroup disable
  btrfs: add missing mutex_unlock in btrfs_relocate_sys_chunks()

Pull s390 fixes from Alexander Gordeev:

 - The function __storage_key_init_range() expects the end address to be
   the first byte outside the range to be initialized. Fix the callers
   that provide the last byte within the range instead.

 - 3270 Channel Command Word (CCW) may contain zero data address in case
   there is no data in the request. Add data availability check to avoid
   erroneous non-zero value as result of virt_to_dma32(NULL) application
   in cases there is no data

 - Add missing CFI directives for an unwinder to restore the return
   address in the vDSO assembler code

 - NUL-terminate kernel buffer when duplicating user space memory region
   on Channel IO (CIO) debugfs write inject

 - Fix wrong format string in zcrypt debug output

 - Return -EBUSY code when a CCA card is temporarily unavailabile

 - Restore a loop that retries derivation of a protected key from a
   secure key in cases the low level reports temporarily unavailability
   with -EBUSY code

* tag 's390-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/paes: Reestablish retry loop in paes
  s390/zcrypt: Use EBUSY to indicate temp unavailability
  s390/zcrypt: Handle ep11 cprb return code
  s390/zcrypt: Fix wrong format string in debug feature printout
  s390/cio: Ensure the copied buf is NUL terminated
  s390/vdso: Add CFI for RA register to asm macro vdso_func
  s390/3270: Fix buffer assignment
  s390/mm: Fix clearing storage keys for huge pages
  s390/mm: Fix storage key clearing for guest huge pages

Pull xtensa fixes from Max Filippov:

 - fix unused variable warning caused by empty flush_dcache_page()
   definition

 - fix stack unwinding on windowed noMMU XIP configurations

 - fix Coccinelle warning 'opportunity for min()' in xtensa ISS platform
   code

* tag 'xtensa-20240502' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: remove redundant flush_dcache_page and ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE macros
  tty: xtensa/iss: Use min() to fix Coccinelle warning
  xtensa: fix MAKE_PC_FROM_RA second argument

Contrary to i915, in xe ADL-N is kept as a different platform, not a
subplatform of ADL-P. Since the display side doesn't need to
differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called,
just fixup the compat header to check for both P and N.

Moving ADL-N to be a subplatform would be more complex as the firmware
loading in xe only handles platforms, not subplatforms, as going forward
the direction is to check on IP version rather than
platforms/subplatforms.

Fix warning when initializing display:

	xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH
	------------[ cut here ]------------
	xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P))

And wrong paths being taken on the display side.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425181610.2704633-1-lucas.demarchi@intel.comSigned-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 6a2a90cb)
Fixes: 44e69495 ("drm/xe/display: Implement display support")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge tag 'firewire-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:
 "Two driver fixes:

   - The firewire-ohci driver for 1394 OHCI hardware does not fill time
     stamp for response packet when handling asynchronous transaction to
     local destination. This brings an inconvenience that the response
     packet is not equivalent between the transaction to local and
     remote. It is fixed by fulfilling the time stamp with hardware
     time. The fix should be applied to Linux kernel v6.5 or later as
     well.

   - The nosy driver for Texas Instruments TSB12LV21A (PCILynx) has
     long-standing issue about the behaviour when user space application
     passes less size of buffer than expected. It is fixed by returning
     zero according to the convention of UNIX-like systems"

* tag 'firewire-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: fulfill timestamp for some local asynchronous transaction
  firewire: nosy: ensure user_length is taken into account when fetching packet contents

Pull thermal control fixes from Rafael Wysocki:
 "Fix a memory leak and a few locking issues (that may cause the kernel
  to crash in principle if all goes wrong) in the thermal debug code
  introduced during the 6.8 development cycle"

* tag 'thermal-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/debugfs: Prevent use-after-free from occurring after cdev removal
  thermal/debugfs: Fix two locking issues with thermal zone debug
  thermal/debugfs: Free all thermal zone debug memory on zone removal

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf.

  Relatively calm week, likely due to public holiday in most places. No
  known outstanding regressions.

  Current release - regressions:

   - rxrpc: fix wrong alignmask in __page_frag_alloc_align()

   - eth: e1000e: change usleep_range to udelay in PHY mdic access

  Previous releases - regressions:

   - gro: fix udp bad offset in socket lookup

   - bpf: fix incorrect runtime stat for arm64

   - tipc: fix UAF in error path

   - netfs: fix a potential infinite loop in extract_user_to_sg()

   - eth: ice: ensure the copied buf is NUL terminated

   - eth: qeth: fix kernel panic after setting hsuid

  Previous releases - always broken:

   - bpf:
       - verifier: prevent userspace memory access
       - xdp: use flags field to disambiguate broadcast redirect

   - bridge: fix multicast-to-unicast with fraglist GSO

   - mptcp: ensure snd_nxt is properly initialized on connect

   - nsh: fix outer header access in nsh_gso_segment().

   - eth: bcmgenet: fix racing registers access

   - eth: vxlan: fix stats counters.

  Misc:

   - a bunch of MAINTAINERS file updates"

* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
  MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
  MAINTAINERS: remove Ariel Elior
  net: gro: add flush check in udp_gro_receive_segment
  net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
  ipv4: Fix uninit-value access in __ip_make_skb()
  s390/qeth: Fix kernel panic after setting hsuid
  vxlan: Pull inner IP header in vxlan_rcv().
  tipc: fix a possible memleak in tipc_buf_append
  tipc: fix UAF in error path
  rxrpc: Clients must accept conn from any address
  net: core: reject skb_copy(_expand) for fraglist GSO skbs
  net: bridge: fix multicast-to-unicast with fraglist GSO
  mptcp: ensure snd_nxt is properly initialized on connect
  e1000e: change usleep_range to udelay in PHY mdic access
  net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
  cxgb4: Properly lock TX queue for the selftest.
  rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
  vxlan: Add missing VNI filter counter update in arp_reduce().
  vxlan: Fix racy device stats updates.
  net: qede: use return from qede_parse_actions()
  ...

Merge commit '50abcc17' of git://git.infradead.org/nvme into block-6.9

Pull NVMe fixes from Keith.

* git://git.infradead.org/nvme:
  nvme-tcp: strict pdu pacing to avoid send stalls on TLS
  nvmet: fix nvme status code when namespace is disabled
  nvmet-tcp: fix possible memory leak when tearing down a controller
  nvme: cancel pending I/O if nvme controller is in terminal state
  nvmet-auth: replace pr_debug() with pr_err() to report an error.
  nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
  nvme: find numa distance only if controller has valid numa id
  nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH

Chris's email address bounces and lore hasn't seen an email
from anyone with his name for almost a decade.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430233532.1356982-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

aelior@marvell.com bounces, we haven't seen Ariel on lore
since March 2022.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240430233305.1356105-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Richard Gobert says:

====================
net: gro: add flush/flush_id checks and fix wrong offset in udp

This series fixes a bug in the complete phase of UDP in GRO, in which
socket lookup fails due to using network_header when parsing encapsulated
packets. The fix is to add network_offset and inner_network_offset to
napi_gro_cb and use these offsets for socket lookup.

In addition p->flush/flush_id should be checked in all UDP flows. The
same logic from tcp_gro_receive is applied for all flows in
udp_gro_receive_segment. This prevents packets with mismatching network
headers (flush/flush_id turned on) from merging in UDP GRO.

The original series includes a change to vxlan test which adds the local
parameter to prevent similar future bugs. I plan to submit it separately to
net-next.

This series is part of a previously submitted series to net-next:
https://lore.kernel.org/all/20240408141720.98832-1-richardbgobert@gmail.com/

v3 -> v4:
 - Store network offsets, and use them only in udp_gro_complete flows
 - Correct commit hash used in Fixes tag
 - v3:
 https://lore.kernel.org/netdev/20240424163045.123528-1-richardbgobert@gmail.com/

v2 -> v3:
 - Add network_offsets and fix udp bug in a single commit to make backporting easier
 - Write to inner_network_offset in {inet,ipv6}_gro_receive
 - Use network_offsets union in tcp[46]_gro_complete as well
 - v2:
 https://lore.kernel.org/netdev/20240419153542.121087-1-richardbgobert@gmail.com/

v1 -> v2:
 - Use network_offsets instead of p_poff param as suggested by Willem
 - Check flush before postpull, and for all UDP GRO flows
 - v1:
 https://lore.kernel.org/netdev/20240412152120.115067-1-richardbgobert@gmail.com/
====================

Link: https://lore.kernel.org/r/20240430143555.126083-1-richardbgobert@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

GRO-GSO path is supposed to be transparent and as such L3 flush checks are
relevant to all UDP flows merging in GRO. This patch uses the same logic
and code from tcp_gro_receive, terminating merge if flush is non zero.

Fixes: e20cf8d3 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Commits a6024562 ("udp: Add GRO functions to UDP socket") and 57c67ff4 ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.

This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.

This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.

To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.

Reproduction example:

Endpoint configuration example (fou + local address bind)

    # ip fou add port 6666 ipproto 4
    # ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
    # ip link set tun1 up
    # ip a add 1.1.1.2/24 dev tun1

Netperf TCP_STREAM result on net-next before patch is applied:

net-next main, GRO enabled:
    $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
    Recv   Send    Send
    Socket Socket  Message  Elapsed
    Size   Size    Size     Time     Throughput
    bytes  bytes   bytes    secs.    10^6bits/sec

    131072  16384  16384    5.28        2.37

net-next main, GRO disabled:
    $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
    Recv   Send    Send
    Socket Socket  Message  Elapsed
    Size   Size    Size     Time     Throughput
    bytes  bytes   bytes    secs.    10^6bits/sec

    131072  16384  16384    5.01     2745.06

patch applied, GRO enabled:
    $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
    Recv   Send    Send
    Socket Socket  Message  Elapsed
    Size   Size    Size     Time     Throughput
    bytes  bytes   bytes    secs.    10^6bits/sec

    131072  16384  16384    5.01     2877.38

Fixes: a6024562 ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

KMSAN reported uninit-value access in __ip_make_skb() [1].  __ip_make_skb()
tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a
race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL
while __ip_make_skb() is running, the function will access icmphdr in the
skb even if it is not included. This causes the issue reported by KMSAN.

Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL
on the socket.

Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These
are union in struct flowi4 and are implicitly initialized by
flowi4_init_output(), but we should not rely on specific union layout.

Initialize these explicitly in raw_sendmsg().

[1]
BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
 __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
 ip_finish_skb include/net/ip.h:243 [inline]
 ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508
 raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654
 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg+0x274/0x3c0 net/socket.c:745
 __sys_sendto+0x62c/0x7b0 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x130/0x200 net/socket.c:2199
 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

Uninit was created at:
 slab_post_alloc_hook mm/slub.c:3804 [inline]
 slab_alloc_node mm/slub.c:3845 [inline]
 kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888
 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577
 __alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668
 alloc_skb include/linux/skbuff.h:1318 [inline]
 __ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128
 ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365
 raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648
 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg+0x274/0x3c0 net/socket.c:745
 __sys_sendto+0x62c/0x7b0 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x130/0x200 net/socket.c:2199
 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014

Fixes: 99e5acae ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20240430123945.2057348-1-syoshida@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In one case the -1 is returned which is quite confusing code for
the wrong device ID, in another the ret is returning instead of
plain 0 that also confusing as readed may ask the possible meaning
of positive codes, which are never the case there. Convert both
to use explicit predefined error codes to make it clear what's going
on there.

Fixes: 5a042273 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-4-andriy.shevchenko@linux.intel.comSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com

GPIO controller might not be available when driver is being probed.
There are plenty of reasons why, one of which is deferred probe.

Since GPIOs are optional, return any error code we got to the upper
layer, including deferred probe. With that in mind, use dev_err_probe()
in order to avoid spamming the logs.

Fixes: 5a042273 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-3-andriy.shevchenko@linux.intel.comSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com

It seems driver missed the point of proper use of device property APIs.
Correct this by updating headers and calls respectively.

Fixes: 5a042273 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240425142706.2440113-2-andriy.shevchenko@linux.intel.comSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-2-andriy.shevchenko@linux.intel.com

Symptom:
When the hsuid attribute is set for the first time on an IQD Layer3
device while the corresponding network interface is already UP,
the kernel will try to execute a napi function pointer that is NULL.

Example:
---------------------------------------------------------------------------
[ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP
[ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de
s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod
 qdio ccwgroup pkey zcrypt
[ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1
[ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR)
[ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2)
[ 2057.572748]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
[ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000
[ 2057.572754]            00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80
[ 2057.572756]            000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8
[ 2057.572758]            00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68
[ 2057.572762] Krnl Code:#0000000000000000: 0000                illegal
                         >0000000000000002: 0000                illegal
                          0000000000000004: 0000                illegal
                          0000000000000006: 0000                illegal
                          0000000000000008: 0000                illegal
                          000000000000000a: 0000                illegal
                          000000000000000c: 0000                illegal
                          000000000000000e: 0000                illegal
[ 2057.572800] Call Trace:
[ 2057.572801] ([<00000000ec639700>] 0xec639700)
[ 2057.572803]  [<00000000913183e2>] net_rx_action+0x2ba/0x398
[ 2057.572809]  [<0000000091515f76>] __do_softirq+0x11e/0x3a0
[ 2057.572813]  [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58
[ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60)
[ 2057.572822]  [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98
[ 2057.572825]  [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70
[ 2057.572827]  [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv]
[ 2057.572830]  [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv]
[ 2057.572833]  [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv]
[ 2057.572835]  [<00000000912e7e90>] __sys_connect+0xa0/0xd8
[ 2057.572839]  [<00000000912e9580>] sys_socketcall+0x228/0x348
[ 2057.572841]  [<0000000091514e1a>] system_call+0x2a6/0x2c8
[ 2057.572843] Last Breaking-Event-Address:
[ 2057.572844]  [<0000000091317e44>] __napi_poll+0x4c/0x1d8
[ 2057.572846]
[ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt
-------------------------------------------------------------------------------------------

Analysis:
There is one napi structure per out_q: card->qdio.out_qs[i].napi
The napi.poll functions are set during qeth_open().

Since
commit 1cfef80d ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
qeth_set_offline()/qeth_set_online() no longer call dev_close()/
dev_open(). So if qeth_free_qdio_queues() cleared
card->qdio.out_qs[i].napi.poll while the network interface was UP and the
card was offline, they are not set again.

Reproduction:
chzdev -e $devno layer2=0
ip link set dev $network_interface up
echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online
echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid
echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online
-> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...)

Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid
is set for the first time or when it is removed.

Workarounds:
- Set hsuid before setting the device online for the first time
or
- Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno;
to set hsuid on an existing device. (this will remove and recreate the
network interface)

Fix:
There is no need to free the output queues when a completion queue is
added or removed.
card->qdio.state now indicates whether the inbound buffer pool and the
outbound queues are allocated.
card->qdio.c_q indicates whether a CQ is allocated.

Fixes: 1cfef80d ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The alc_spec.power_hook is defined only with CONFIG_PM, and the recent
fix overlooked it, resulting in a build error without CONFIG_PM.
Fix it with the simple ifdef and set __maybe_unused for the function.

We may drop the whole CONFIG_PM dependency there, but it should be
done in a separate cleanup patch later.

Fixes: 1e707769 ("ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405012104.Dr7h318W-lkp@intel.com/
Message-ID: <20240502062442.30545-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Ensure the inner IP header is part of skb's linear data before reading
its ECN bits. Otherwise we might read garbage.
One symptom is the system erroneously logging errors like
"vxlan: non-ECT from xxx.xxx.xxx.xxx with TOS=xxxx".

Similar bugs have been fixed in geneve, ip_tunnel and ip6_tunnel (see
commit 1ca1ba46 ("geneve: make sure to pull inner header in
geneve_rx()") for example). So let's reuse the same code structure for
consistency. Maybe we'll can add a common helper in the future.

Fixes: d342894c ("vxlan: virtual extensible lan")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/1239c8db54efec341dd6455c77e0380f58923a3c.1714495737.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

__skb_linearize() doesn't free the skb when it fails, so move
'*buf = NULL' after __skb_linearize(), so that the skb can be
freed on the err path.

Fixes: b7df21cf ("tipc: skb_linearize the head skb when reassembling msgs")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/90710748c29a1521efac4f75ea01b3b7e61414cf.1714485818.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported
a UAF in the tipc_buf_append() error path:

BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0
linux/net/core/skbuff.c:1183
Read of size 8 at addr ffff88804d2a7c80 by task poc/8034

CPU: 1 PID: 8034 Comm: poc Not tainted 6.8.2 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.0-debian-1.16.0-5 04/01/2014
Call Trace:
 <IRQ>
 __dump_stack linux/lib/dump_stack.c:88
 dump_stack_lvl+0xd9/0x1b0 linux/lib/dump_stack.c:106
 print_address_description linux/mm/kasan/report.c:377
 print_report+0xc4/0x620 linux/mm/kasan/report.c:488
 kasan_report+0xda/0x110 linux/mm/kasan/report.c:601
 kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183
 skb_release_data+0x5af/0x880 linux/net/core/skbuff.c:1026
 skb_release_all linux/net/core/skbuff.c:1094
 __kfree_skb linux/net/core/skbuff.c:1108
 kfree_skb_reason+0x12d/0x210 linux/net/core/skbuff.c:1144
 kfree_skb linux/./include/linux/skbuff.h:1244
 tipc_buf_append+0x425/0xb50 linux/net/tipc/msg.c:186
 tipc_link_input+0x224/0x7c0 linux/net/tipc/link.c:1324
 tipc_link_rcv+0x76e/0x2d70 linux/net/tipc/link.c:1824
 tipc_rcv+0x45f/0x10f0 linux/net/tipc/node.c:2159
 tipc_udp_recv+0x73b/0x8f0 linux/net/tipc/udp_media.c:390
 udp_queue_rcv_one_skb+0xad2/0x1850 linux/net/ipv4/udp.c:2108
 udp_queue_rcv_skb+0x131/0xb00 linux/net/ipv4/udp.c:2186
 udp_unicast_rcv_skb+0x165/0x3b0 linux/net/ipv4/udp.c:2346
 __udp4_lib_rcv+0x2594/0x3400 linux/net/ipv4/udp.c:2422
 ip_protocol_deliver_rcu+0x30c/0x4e0 linux/net/ipv4/ip_input.c:205
 ip_local_deliver_finish+0x2e4/0x520 linux/net/ipv4/ip_input.c:233
 NF_HOOK linux/./include/linux/netfilter.h:314
 NF_HOOK linux/./include/linux/netfilter.h:308
 ip_local_deliver+0x18e/0x1f0 linux/net/ipv4/ip_input.c:254
 dst_input linux/./include/net/dst.h:461
 ip_rcv_finish linux/net/ipv4/ip_input.c:449
 NF_HOOK linux/./include/linux/netfilter.h:314
 NF_HOOK linux/./include/linux/netfilter.h:308
 ip_rcv+0x2c5/0x5d0 linux/net/ipv4/ip_input.c:569
 __netif_receive_skb_one_core+0x199/0x1e0 linux/net/core/dev.c:5534
 __netif_receive_skb+0x1f/0x1c0 linux/net/core/dev.c:5648
 process_backlog+0x101/0x6b0 linux/net/core/dev.c:5976
 __napi_poll.constprop.0+0xba/0x550 linux/net/core/dev.c:6576
 napi_poll linux/net/core/dev.c:6645
 net_rx_action+0x95a/0xe90 linux/net/core/dev.c:6781
 __do_softirq+0x21f/0x8e7 linux/kernel/softirq.c:553
 do_softirq linux/kernel/softirq.c:454
 do_softirq+0xb2/0xf0 linux/kernel/softirq.c:441
 </IRQ>
 <TASK>
 __local_bh_enable_ip+0x100/0x120 linux/kernel/softirq.c:381
 local_bh_enable linux/./include/linux/bottom_half.h:33
 rcu_read_unlock_bh linux/./include/linux/rcupdate.h:851
 __dev_queue_xmit+0x871/0x3ee0 linux/net/core/dev.c:4378
 dev_queue_xmit linux/./include/linux/netdevice.h:3169
 neigh_hh_output linux/./include/net/neighbour.h:526
 neigh_output linux/./include/net/neighbour.h:540
 ip_finish_output2+0x169f/0x2550 linux/net/ipv4/ip_output.c:235
 __ip_finish_output linux/net/ipv4/ip_output.c:313
 __ip_finish_output+0x49e/0x950 linux/net/ipv4/ip_output.c:295
 ip_finish_output+0x31/0x310 linux/net/ipv4/ip_output.c:323
 NF_HOOK_COND linux/./include/linux/netfilter.h:303
 ip_output+0x13b/0x2a0 linux/net/ipv4/ip_output.c:433
 dst_output linux/./include/net/dst.h:451
 ip_local_out linux/net/ipv4/ip_output.c:129
 ip_send_skb+0x3e5/0x560 linux/net/ipv4/ip_output.c:1492
 udp_send_skb+0x73f/0x1530 linux/net/ipv4/udp.c:963
 udp_sendmsg+0x1a36/0x2b40 linux/net/ipv4/udp.c:1250
 inet_sendmsg+0x105/0x140 linux/net/ipv4/af_inet.c:850
 sock_sendmsg_nosec linux/net/socket.c:730
 __sock_sendmsg linux/net/socket.c:745
 __sys_sendto+0x42c/0x4e0 linux/net/socket.c:2191
 __do_sys_sendto linux/net/socket.c:2203
 __se_sys_sendto linux/net/socket.c:2199
 __x64_sys_sendto+0xe0/0x1c0 linux/net/socket.c:2199
 do_syscall_x64 linux/arch/x86/entry/common.c:52
 do_syscall_64+0xd8/0x270 linux/arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x6f/0x77 linux/arch/x86/entry/entry_64.S:120
RIP: 0033:0x7f3434974f29
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 8b 0d 37 8f 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007fff9154f2b8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3434974f29
RDX: 00000000000032c8 RSI: 00007fff9154f300 RDI: 0000000000000003
RBP: 00007fff915532e0 R08: 00007fff91553360 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000212 R12: 000055ed86d261d0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>

In the critical scenario, either the relevant skb is freed or its
ownership is transferred into a frag_lists. In both cases, the cleanup
code must not free it again: we need to clear the skb reference earlier.

Fixes: 1149557d ("tipc: eliminate unnecessary linearization of incoming buffers")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-23852
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/752f1ccf762223d109845365d07f55414058e5a3.1714484273.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The find connection logic of Transarc's Rx was modified in the mid-1990s
to support multi-homed servers which might send a response packet from
an address other than the destination address in the received packet.
The rules for accepting a packet by an Rx initiator (RX_CLIENT_CONNECTION)
were altered to permit acceptance of a packet from any address provided
that the port number was unchanged and all of the connection identifiers
matched (Epoch, CID, SecurityClass, ...).

This change applies the same rules to the Linux implementation which makes
it consistent with IBM AFS 3.6, Arla, OpenAFS and AuriStorFS.

Fixes: 17926a79 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: Jeffrey Altman <jaltman@auristor.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://lore.kernel.org/r/20240419163057.4141728-1-marc.dionne@auristor.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'asoc-fix-v6.9-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

This is much larger than is ideal, partly due to your holiday but also
due to several vendors having come in with relatively large fixes at
similar times.  It's all driver specific stuff.

The meson fixes from Jerome fix some rare timing issues with blocking
operations happening in triggers, plus the continuous clock support
which fixes clocking for some platforms.  The SOF series from Peter
builds to the fix to avoid spurious resets of ChainDMA which triggered
errors in cleanup paths with both PulseAudio and PipeWire, and there's
also some simple new debugfs files from Pierre which make support a lot
eaiser.

Merge tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "There's a few simple driver specific fixes here, plus some core
  cleanups from Matti which fix issues found with client drivers due to
  the API being confusing.

  The two fixes for the stubs provide more constructive behaviour with
  !REGULATOR configurations, issues were noticed with some hwmon drivers
  which would otherwise have needed confusing bodges in the users.

  The irq_helpers fix to duplicate the provided name for the interrupt
  controller was found because a driver got this wrong and it's again a
  case where the core is the sensible place to put the fix"

* tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: change devm_regulator_get_enable_optional() stub to return Ok
  regulator: change stubbed devm_regulator_get_enable to return Ok
  regulator: vqmmc-ipq4019: fix module autoloading
  regulator: qcom-refgen: fix module autoloading
  regulator: mt6360: De-capitalize devicetree regulator subnodes
  regulator: irq_helpers: duplicate IRQ name

We flush the rebind worker during the vm close phase, however in places
like preempt_fence_work_func() we seem to queue the rebind worker
without first checking if the vm has already been closed.  The concern
here is the vm being closed with the worker flushed, but then being
rearmed later, which looks like potential uaf, since there is no actual
refcounting to track the queued worker. We can't take the vm->lock here
in preempt_rebind_work_func() to first check if the vm is closed since
that will deadlock, so instead flush the worker again when the vm
refcount reaches zero.

v2:
 - Grabbing vm->lock in the preempt worker creates a deadlock, so
   checking the closed state is tricky. Instead flush the worker when
   the refcount reaches zero. It should be impossible to queue the
   preempt worker without already holding vm ref.

Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1676
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1364
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423074721.119633-4-matthew.auld@intel.com
(cherry picked from commit 3d44d67c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Panel replay was enabled by default in commit 5950efe2
("drm/amd/display: Enable Panel Replay for static screen use case"), but
it isn't working properly at least on some BOE and AUO panels.  Instead
of being static the screen is solid black when active.  As it's a new
feature that was just introduced that regressed VRR disable it for now
so that problem can be properly root caused.

Cc: Tom Chung <chiahsuan.chung@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344
Fixes: 5950efe2 ("drm/amd/display: Enable Panel Replay for static screen use case")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment.

Fixes: 3a1296a3 ("net: Support GRO/GSO fraglist chaining.")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns
an invalid linearized skb. This code only needs to change the ethernet
header, so pskb_copy is the right function to call here.

Fixes: 6db6f0ea ("bridge: multicast to unicast")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS requires a strict pdu pacing via MSG_EOR to signal the end
of a record and subsequent encryption. If we do not set MSG_EOR
at the end of a sequence the record won't be closed, encryption
doesn't start, and we end up with a send stall as the message
will never be passed on to the TCP layer.
So do not check for the queue status when TLS is enabled but
rather make the MSG_MORE setting dependent on the current
request only.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>

If the user disabled a nvmet namespace, it is removed from the subsystem
namespaces list. When nvmet processes a command directed to an nsid that
was disabled, it cannot differentiate between a nsid that is disabled
vs. a non-existent namespace, and resorts to return NVME_SC_INVALID_NS
with the dnr bit set.

This translates to a non-retryable status for the host, which translates
to a user error. We should expect disabled namespaces to not cause an
I/O error in a multipath environment.

Address this by searching a configfs item for the namespace nvmet failed
to find, and if we found one, conclude that the namespace is disabled
(perhaps temporarily). Return NVME_SC_INTERNAL_PATH_ERROR in this case
and keep DNR bit cleared.
Reported-by: Jirong Feng <jirong.feng@easystack.cn>
Tested-by: Jirong Feng <jirong.feng@easystack.cn>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

When we teardown the controller, we wait for pending I/Os to complete
(sq->ref on all queues to drop to zero) and then we go over the commands,
and free their command buffers in case they are still fetching data from
the host (e.g. processing nvme writes) and have yet to take a reference
on the sq.

However, we may miss the case where commands have failed before executing
and are queued for sending a response, but will never occur because the
queue socket is already down. In this case we may miss deallocating command
buffers.

Solve this by freeing all commands buffers as nvmet_tcp_free_cmd_buffers is
idempotent anyways.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>