- 28 Oct, 2012 15 commits
-
-
Daisuke Nishimura authored
commit 1f5320d5 upstream. notify_on_release must be triggered when the last process in a cgroup is move to another. But if the first(and only) process in a cgroup is moved to another, notify_on_release is not triggered. # mkdir /cgroup/cpu/SRC # mkdir /cgroup/cpu/DST # # echo 1 >/cgroup/cpu/SRC/notify_on_release # echo 1 >/cgroup/cpu/DST/notify_on_release # # sleep 300 & [1] 8629 # # echo 8629 >/cgroup/cpu/SRC/tasks # echo 8629 >/cgroup/cpu/DST/tasks -> notify_on_release for /SRC must be triggered at this point, but it isn't. This is because put_css_set() is called before setting CGRP_RELEASABLE in cgroup_task_migrate(), and is a regression introduce by the commit:74a1166d(cgroups: make procs file writable), which was merged into v3.0. Acked-by:
Li Zefan <lizefan@huawei.com> Cc: Ben Blum <bblum@andrew.cmu.edu> Signed-off-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
commit 4b35f1c5 upstream. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
commit 1452df6f upstream. Based on information from the ZTE Windows drivers. Signed-off-by:
-
Nicolas Boullis authored
commit 301a29da upstream. The current code assumes that CSIZE is 0000060, which appears to be wrong on some arches (such as powerpc). Signed-off-by:
Nicolas Boullis <nboullis@debian.org> Acked-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Ming Lei authored
commit c5211187 upstream. If the write endpoint is interrupt type, usb_sndintpipe() should be passed to usb_fill_int_urb() instead of usb_sndbulkpipe(). Signed-off-by:
Ming Lei <ming.lei@canonical.com> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
David Vrabel authored
commit a349e23d upstream. In 32 bit guests, if a userspace process has %eax == -ERESTARTSYS (-512) or -ERESTARTNOINTR (-513) when it is interrupted by an event /and/ the process has a pending signal then %eip (and %eax) are corrupted when returning to the main process after handling the signal. The application may then crash with SIGSEGV or a SIGILL or it may have subtly incorrect behaviour (depending on what instruction it returned to). The occurs because handle_signal() is incorrectly thinking that there is a system call that needs to restarted so it adjusts %eip and %eax to re-execute the system call instruction (even though user space had not done a system call). If %eax == -514 (-ERESTARTNOHAND (-514) or -ERESTART_RESTARTBLOCK (-516) then handle_signal() only corrupted %eax (by setting it to -EINTR). This may cause the application to crash or have incorrect behaviour. handle_signal() assumes that regs->orig_ax >= 0 means a system call so any kernel entry point that is not for a system call must push a negative value for orig_ax. For example, for physical interrupts on bare metal the inverse of the vector is pushed and page_fault() sets regs->orig_ax to -1, overwriting the hardware provided error code. xen_hypervisor_callback() was incorrectly pushing 0 for orig_ax instead of -1. Classic Xen kernels pushed %eax which works as %eax cannot be both non-negative and -RESTARTSYS (etc.), but using -1 is consistent with other non-system call entry points and avoids some of the tests in handle_signal(). There were similar bugs in xen_failsafe_callback() of both 32 and 64-bit guests. If the fault was corrected and the normal return path was used then 0 was incorrectly pushed as the value for orig_ax. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Acked-by:
Jan Beulich <JBeulich@suse.com> Acked-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Jacob Shin authored
commit 1bbbbe77 upstream. On systems with very large memory (1 TB in our case), BIOS may report a reserved region or a hole in the E820 map, even above the 4 GB range. Exclude these from the direct mapping. [ hpa: this should be done not just for > 4 GB but for everything above the legacy region (1 MB), at the very least. That, however, turns out to require significant restructuring. That work is well underway, but is not suitable for rc/stable. ] Signed-off-by:
Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1319145326-13902-1-git-send-email-jacob.shin@amd.comSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Kees Cook authored
commit 31fd84b9 upstream. The min/max call needed to have explicit types on some architectures (e.g. mn10300). Use clamp_t instead to avoid the warning: kernel/sys.c: In function 'override_release': kernel/sys.c:1287:10: warning: comparison of distinct pointer types lacks a cast [enabled by default] Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Kees Cook authored
commit 2702b152 upstream. Calling uname() with the UNAME26 personality set allows a leak of kernel stack contents. This fixes it by defensively calculating the length of copy_to_user() call, making the len argument unsigned, and initializing the stack buffer to zero (now technically unneeded, but hey, overkill). CVE-2012-0957 Reported-by:
PaX Team <pageexec@freemail.hu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
commit fdc858a4 upstream. The sharpsl_pcmcia_ops structure gets passed into sa11xx_drv_pcmcia_probe, where it gets accessed at run-time, unlike all other pcmcia drivers that pass their structures into platform_device_add_data, which makes a copy. This means the gcc warning is valid and the structure must not be marked as __initdata. Without this patch, building collie_defconfig results in: drivers/pcmcia/pxa2xx_sharpsl.c:22:31: fatal error: mach-pxa/hardware.h: No such file or directory compilation terminated. make[3]: *** [drivers/pcmcia/pxa2xx_sharpsl.o] Error 1 make[2]: *** [drivers/pcmcia] Error 2 make[1]: *** [drivers] Error 2 make: *** [sub-make] Error 2 Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Pavel Machek <pavel@suse.cz> Cc: linux-pcmcia@lists.infradead.org Cc: Jochen Friedrich <jochen@scram.de> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts 12d63702 which was commit 303a7ce9 upstream. Taking hostname from uts namespace if not safe, because this cuold be performind during umount operation on child reaper death. And in this case current->nsproxy is NULL already. Signed-off-by:
-
Sasha Levin authored
commit 212ba906 upstream. The buffer size in read_flush() is too small for the longest possible values for it. This can lead to a kernel stack corruption: [ 43.047329] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff833e64b4 [ 43.047329] [ 43.049030] Pid: 6015, comm: trinity-child18 Tainted: G W 3.5.0-rc7-next-20120716-sasha #221 [ 43.050038] Call Trace: [ 43.050435] [<ffffffff836c60c2>] panic+0xcd/0x1f4 [ 43.050931] [<ffffffff833e64b4>] ? read_flush.isra.7+0xe4/0x100 [ 43.051602] [<ffffffff810e94e6>] __stack_chk_fail+0x16/0x20 [ 43.052206] [<ffffffff833e64b4>] read_flush.isra.7+0xe4/0x100 [ 43.052951] [<ffffffff833e6500>] ? read_flush_pipefs+0x30/0x30 [ 43.053594] [<ffffffff833e652c>] read_flush_procfs+0x2c/0x30 [ 43.053596] [<ffffffff812b9a8c>] proc_reg_read+0x9c/0xd0 [ 43.053596] [<ffffffff812b99f0>] ? proc_reg_write+0xd0/0xd0 [ 43.053596] [<ffffffff81250d5b>] do_loop_readv_writev+0x4b/0x90 [ 43.053596] [<ffffffff81250fd6>] do_readv_writev+0xf6/0x1d0 [ 43.053596] [<ffffffff812510ee>] vfs_readv+0x3e/0x60 [ 43.053596] [<ffffffff812511b8>] sys_readv+0x48/0xb0 [ 43.053596] [<ffffffff8378167d>] system_call_fastpath+0x1a/0x1f Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit 44009105 upstream. The "event" variable is a u16 so the shift will always wrap to zero making the line a no-op. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Robert Richter <robert.richter@amd.com> Signed-off-by:
-
Trond Myklebust authored
commit cd0b16c1 upstream. If the filehandle is stale, or open access is denied for some reason, nlm_fopen() may return one of the NLMv4-specific error codes nlm4_stale_fh or nlm4_failed. These get passed right through nlm_lookup_file(), and so when nlmsvc_retrieve_args() calls the latter, it needs to filter the result through the cast_status() machinery. Failure to do so, will trigger the BUG_ON() in encode_nlm_stat... Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Reported-by:
Larry McVoy <lm@bitmover.com> Signed-off-by:
-
Chris Metcalf authored
commit 627072b0 upstream. The tile tool chain uses the .eh_frame information for backtracing. The vmlinux build drops any .eh_frame sections at link time, but when present in kernel modules, it causes a module load failure due to the presence of unsupported pc-relative relocations. When compiling to use compiler feedback support, the compiler by default omits .eh_frame information, so we don't see this problem. But when not using feedback, we need to explicitly suppress the .eh_frame. Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
- 22 Oct, 2012 2 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 2101aa5b which is commit 60ea8226 upstream. To quote Ben: This is not needed, as there is no QUEUE_FLAG_BYPASS in 3.0.y. To quote Tejun: I don't think it will break anything as it simply changes assignment to |= to avoid overwriting existing flags. That said, any patch can break anything, so if possible it would be better to drop for 3.0.y. So I'll revert this to be safe. Cc: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
- 21 Oct, 2012 23 commits
-
-
Greg Kroah-Hartman authored
-
Maxim Kachur authored
commit 10f571d0 upstream. Add chip details for E-mu 1010 PCIe card. It has the same chip as found in E-mu 1010b but it uses different PCI id. Signed-off-by:
Maxim Kachur <mcdebugger@duganet.ru> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 733a48e5 upstream. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44721Signed-off-by:
-
Nikola Pajkovsky authored
commit 68766a2e upstream. In case we detect a problem and bail out, we fail to set "ret" to a nonzero value, and udf_load_logicalvol will mistakenly report success. Signed-off-by:
Nikola Pajkovsky <npajkovs@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Peter Huewe authored
commit abce9ac2 upstream. tpm_write calls tpm_transmit without checking the return value and assigns the return value unconditionally to chip->pending_data, even if it's an error value. This causes three bugs. So if we write to /dev/tpm0 with a tpm_param_size bigger than TPM_BUFSIZE=0x1000 (e.g. 0x100a) and a bufsize also bigger than TPM_BUFSIZE (e.g. 0x100a) tpm_transmit returns -E2BIG which is assigned to chip->pending_data as -7, but tpm_write returns that TPM_BUFSIZE bytes have been successfully been written to the TPM, altough this is not true (bug #1). As we did write more than than TPM_BUFSIZE bytes but tpm_write reports that only TPM_BUFSIZE bytes have been written the vfs tries to write the remaining bytes (in this case 10 bytes) to the tpm device driver via tpm_write which then blocks at /* cannot perform a write until the read has cleared either via tpm_read or a user_read_timer timeout */ while (atomic_read(&chip->data_pending) != 0) msleep(TPM_TIMEOUT); for 60 seconds, since data_pending is -7 and nobody is able to read it (since tpm_read luckily checks if data_pending is greater than 0) (#bug 2). After that the remaining bytes are written to the TPM which are interpreted by the tpm as a normal command. (bug #3) So if the last bytes of the command stream happen to be a e.g. tpm_force_clear this gets accidentally sent to the TPM. This patch fixes all three bugs, by propagating the error code of tpm_write and returning -E2BIG if the input buffer is too big, since the response from the tpm for a truncated value is bogus anyway. Moreover it returns -EBUSY to userspace if there is a response ready to be read. Signed-off-by:
Peter Huewe <peter.huewe@infineon.com> Signed-off-by:
Kent Yoder <key@linux.vnet.ibm.com> Signed-off-by:
-
H. Peter Anvin authored
commit 49d859d7 upstream. If the CPU declares that RDRAND is available, go through a guranteed reseed sequence, and make sure that it is actually working (producing data.) If it does not, disable the CPU feature flag. Allow RDRAND to be disabled on the command line (as opposed to at compile time) for a user who has special requirements with regards to random numbers. Signed-off-by:
-
H. Peter Anvin authored
commit 628c6246 upstream. Architectural inlines to get random ints and longs using the RDRAND instruction. Intel has introduced a new RDRAND instruction, a Digital Random Number Generator (DRNG), which is functionally an high bandwidth entropy source, cryptographic whitener, and integrity monitor all built into hardware. This enables RDRAND to be used directly, bypassing the kernel random number pool. For technical documentation, see: http://software.intel.com/en-us/articles/download-the-latest-bull-mountain-software-implementation-guide/ In this patch, this is *only* used for the nonblocking random number pool. RDRAND is a nonblocking source, similar to our /dev/urandom, and is therefore not a direct replacement for /dev/random. The architectural hooks presented in the previous patch only feed the kernel internal users, which only use the nonblocking pool, and so this is not a problem. Since this instruction is available in userspace, there is no reason to have a /dev/hw_rng device driver for the purpose of feeding rngd. This is especially so since RDRAND is a nonblocking source, and needs additional whitening and reduction (see the above technical documentation for details) in order to be of "pure entropy source" quality. The CONFIG_EXPERT compile-time option can be used to disable this use of RDRAND. Signed-off-by:
Fenghua Yu <fenghua.yu@intel.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
commit 09e05d48 upstream. ext3 users of data=journal mode with blocksize < pagesize were occasionally hitting assertion failure in journal_commit_transaction() checking whether the transaction has at least as many credits reserved as buffers attached. The core of the problem is that when a file gets truncated, buffers that still need checkpointing or that are attached to the committing transaction are left with buffer_mapped set. When this happens to buffers beyond i_size attached to a page stradding i_size, subsequent write extending the file will see these buffers and as they are mapped (but underlying blocks were freed) things go awry from here. The assertion failure just coincidentally (and in this case luckily as we would start corrupting filesystem) triggers due to journal_head not being properly cleaned up as well. Under some rare circumstances this bug could even hit data=ordered mode users. There the assertion won't trigger and we would end up corrupting the filesystem. We fix the problem by unmapping buffers if possible (in lots of cases we just need a buffer attached to a transaction as a place holder but it must not be written out anyway). And in one case, we just have to bite the bullet and wait for transaction commit to finish. Reviewed-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
-
Egbert Eich authored
commit 08291847 upstream. radeon_i2c_fini() walks thru the list of I2C bus recs rdev->i2c_bus[] to destroy each of them. radeon_ext_tmds_enc_destroy() however also has code to destroy it's associated I2C bus rec which has been obtained by radeon_i2c_lookup() and is therefore also in the i2c_bus[] list. This causes a double free resulting in a kernel panic when unloading the radeon driver. Removing destroy code from radeon_ext_tmds_enc_destroy() fixes this problem. agd5f: fix compiler warning Signed-off-by:
Egbert Eich <eich@suse.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jean-Christian de Rivaz authored
commit e7d491a1 upstream. This USB V.92/V.32bis Controllered Modem have the USB vendor ID 0x0572 and device ID 0x1340. It need the NO_UNION_NORMAL quirk to be recognized. Reference: http://www.conexant.com/servlets/DownloadServlet/DSH-201723-005.pdf?docid=1725&revid=5 See idVendor and idProduct in table 6-1. Device Descriptors Signed-off-by:
Jean-Christian de Rivaz <jc@eclis.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jan Engelhardt authored
commit 82e6bfe2 upstream. Commit v2.6.19-rc1~1272^2~41 tells us that r->cost != 0 can happen when a running state is saved to userspace and then reinstated from there. Make sure that private xt_limit area is initialized with correct values. Otherwise, random matchings due to use of uninitialized memory. Signed-off-by:
Jan Engelhardt <jengelh@inai.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Acked-by:
-
Florian Westphal authored
commit 7a909ac7 upstream. credit_cap can be set to credit, which avoids inlining user2credits twice. Also, remove inline keyword and let compiler decide. old: 684 192 0 876 36c net/netfilter/xt_limit.o 4927 344 32 5303 14b7 net/netfilter/xt_hashlimit.o now: 668 192 0 860 35c net/netfilter/xt_limit.o 4793 344 32 5169 1431 net/netfilter/xt_hashlimit.o Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 2614f864 upstream. In __nf_ct_expect_check, the function refresh_timer returns 1 if a matching expectation is found and its timer is successfully refreshed. This results in nf_ct_expect_related returning 0. Note that at this point: - the passed expectation is not inserted in the expectation table and its timer was not initialized, since we have refreshed one matching/existing expectation. - nf_ct_expect_alloc uses kmem_cache_alloc, so the expectation timer is in some undefined state just after the allocation, until it is appropriately initialized. This can be a problem for the SIP helper during the expectation addition: ... if (nf_ct_expect_related(rtp_exp) == 0) { if (nf_ct_expect_related(rtcp_exp) != 0) nf_ct_unexpect_related(rtp_exp); ... Note that nf_ct_expect_related(rtp_exp) may return 0 for the timer refresh case that is detailed above. Then, if nf_ct_unexpect_related(rtcp_exp) returns != 0, nf_ct_unexpect_related(rtp_exp) is called, which does: spin_lock_bh(&nf_conntrack_lock); if (del_timer(&exp->timeout)) { nf_ct_unlink_expect(exp); nf_ct_expect_put(exp); } spin_unlock_bh(&nf_conntrack_lock); Note that del_timer always returns false if the timer has been initialized. However, the timer was not initialized since setup_timer was not called, therefore, the expectation timer remains in some undefined state. If I'm not missing anything, this may lead to the removal an unexistent expectation. To fix this, the optimization that allows refreshing an expectation is removed. Now nf_conntrack_expect_related looks more consistent to me since it always add the expectation in case that it returns success. Thanks to Patrick McHardy for participating in the discussion of this patch. I think this may be the source of the problem described by: http://marc.info/?l=netfilter-devel&m=134073514719421&w=2Reported-by:
Rafal Fitt <rafalf@aplusc.com.pl> Acked-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Patrick McHardy authored
commit f22eb25c upstream. Via-headers are parsed beginning at the first character after the Via-address. When the address is translated first and its length decreases, the offset to start parsing at is incorrect and header parameters might be missed. Update the offset after translating the Via-address to fix this. Signed-off-by:
-
Lin Ming authored
commit 9e33ce45 upstream. IPVS should not reset skb->nf_bridge in FORWARD hook by calling nf_reset for NAT replies. It triggers oops in br_nf_forward_finish. [ 579.781508] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 579.781669] IP: [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112 [ 579.781792] PGD 218f9067 PUD 0 [ 579.781865] Oops: 0000 [#1] SMP [ 579.781945] CPU 0 [ 579.781983] Modules linked in: [ 579.782047] [ 579.782080] [ 579.782114] Pid: 4644, comm: qemu Tainted: G W 3.5.0-rc5-00006-g95e69f9 #282 Hewlett-Packard /30E8 [ 579.782300] RIP: 0010:[<ffffffff817b1ca5>] [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112 [ 579.782455] RSP: 0018:ffff88007b003a98 EFLAGS: 00010287 [ 579.782541] RAX: 0000000000000008 RBX: ffff8800762ead00 RCX: 000000000001670a [ 579.782653] RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff8800762ead00 [ 579.782845] RBP: ffff88007b003ac8 R08: 0000000000016630 R09: ffff88007b003a90 [ 579.782957] R10: ffff88007b0038e8 R11: ffff88002da37540 R12: ffff88002da01a02 [ 579.783066] R13: ffff88002da01a80 R14: ffff88002d83c000 R15: ffff88002d82a000 [ 579.783177] FS: 0000000000000000(0000) GS:ffff88007b000000(0063) knlGS:00000000f62d1b70 [ 579.783306] CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b [ 579.783395] CR2: 0000000000000004 CR3: 00000000218fe000 CR4: 00000000000027f0 [ 579.783505] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 579.783684] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 579.783795] Process qemu (pid: 4644, threadinfo ffff880021b20000, task ffff880021aba760) [ 579.783919] Stack: [ 579.783959] ffff88007693cedc ffff8800762ead00 ffff88002da01a02 ffff8800762ead00 [ 579.784110] ffff88002da01a02 ffff88002da01a80 ffff88007b003b18 ffffffff817b26c7 [ 579.784260] ffff880080000000 ffffffff81ef59f0 ffff8800762ead00 ffffffff81ef58b0 [ 579.784477] Call Trace: [ 579.784523] <IRQ> [ 579.784562] [ 579.784603] [<ffffffff817b26c7>] br_nf_forward_ip+0x275/0x2c8 [ 579.784707] [<ffffffff81704b58>] nf_iterate+0x47/0x7d [ 579.784797] [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae [ 579.784906] [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102 [ 579.784995] [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae [ 579.785175] [<ffffffff8187fa95>] ? _raw_write_unlock_bh+0x19/0x1b [ 579.785179] [<ffffffff817ac417>] __br_forward+0x97/0xa2 [ 579.785179] [<ffffffff817ad366>] br_handle_frame_finish+0x1a6/0x257 [ 579.785179] [<ffffffff817b2386>] br_nf_pre_routing_finish+0x26d/0x2cb [ 579.785179] [<ffffffff817b2cf0>] br_nf_pre_routing+0x55d/0x5c1 [ 579.785179] [<ffffffff81704b58>] nf_iterate+0x47/0x7d [ 579.785179] [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44 [ 579.785179] [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102 [ 579.785179] [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44 [ 579.785179] [<ffffffff81551525>] ? sky2_poll+0xb35/0xb54 [ 579.785179] [<ffffffff817ad62a>] br_handle_frame+0x213/0x229 [ 579.785179] [<ffffffff817ad417>] ? br_handle_frame_finish+0x257/0x257 [ 579.785179] [<ffffffff816e3b47>] __netif_receive_skb+0x2b4/0x3f1 [ 579.785179] [<ffffffff816e69fc>] process_backlog+0x99/0x1e2 [ 579.785179] [<ffffffff816e6800>] net_rx_action+0xdf/0x242 [ 579.785179] [<ffffffff8107e8a8>] __do_softirq+0xc1/0x1e0 [ 579.785179] [<ffffffff8135a5ba>] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 579.785179] [<ffffffff8188812c>] call_softirq+0x1c/0x30 The steps to reproduce as follow, 1. On Host1, setup brige br0(192.168.1.106) 2. Boot a kvm guest(192.168.1.105) on Host1 and start httpd 3. Start IPVS service on Host1 ipvsadm -A -t 192.168.1.106:80 -s rr ipvsadm -a -t 192.168.1.106:80 -r 192.168.1.105:80 -m 4. Run apache benchmark on Host2(192.168.1.101) ab -n 1000 http://192.168.1.106/ ip_vs_reply4 ip_vs_out handle_response ip_vs_notrack nf_reset() { skb->nf_bridge = NULL; } Actually, IPVS wants in this case just to replace nfct with untracked version. So replace the nf_reset(skb) call in ip_vs_notrack() with a nf_conntrack_put(skb->nfct) call. Signed-off-by:
Lin Ming <mlin@ss.pku.edu.cn> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 3f509c68 upstream. We're hitting bug while trying to reinsert an already existing expectation: kernel BUG at kernel/timer.c:895! invalid opcode: 0000 [#1] SMP [...] Call Trace: <IRQ> [<ffffffffa0069563>] nf_ct_expect_related_report+0x4a0/0x57a [nf_conntrack] [<ffffffff812d423a>] ? in4_pton+0x72/0x131 [<ffffffffa00ca69e>] ip_nat_sdp_media+0xeb/0x185 [nf_nat_sip] [<ffffffffa00b5b9b>] set_expected_rtp_rtcp+0x32d/0x39b [nf_conntrack_sip] [<ffffffffa00b5f15>] process_sdp+0x30c/0x3ec [nf_conntrack_sip] [<ffffffff8103f1eb>] ? irq_exit+0x9a/0x9c [<ffffffffa00ca738>] ? ip_nat_sdp_media+0x185/0x185 [nf_nat_sip] We have to remove the RTP expectation if the RTCP expectation hits EBUSY since we keep trying with other ports until we succeed. Reported-by:
-
Jozsef Kadlecsik authored
commit 07153c6e upstream. It was reported that the Linux kernel sometimes logs: klogd: [2629147.402413] kernel BUG at net / netfilter / nf_conntrack_proto_tcp.c: 447! klogd: [1072212.887368] kernel BUG at net / netfilter / nf_conntrack_proto_tcp.c: 392 ipv4_get_l4proto() in nf_conntrack_l3proto_ipv4.c and tcp_error() in nf_conntrack_proto_tcp.c should catch malformed packets, so the errors at the indicated lines - TCP options parsing - should not happen. However, tcp_error() relies on the "dataoff" offset to the TCP header, calculated by ipv4_get_l4proto(). But ipv4_get_l4proto() does not check bogus ihl values in IPv4 packets, which then can slip through tcp_error() and get caught at the TCP options parsing routines. The patch fixes ipv4_get_l4proto() by invalidating packets with bogus ihl value. The patch closes netfilter bugzilla id 771. Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 5b423f6a upstream. Existing code assumes that del_timer returns true for alive conntrack entries. However, this is not true if reliable events are enabled. In that case, del_timer may return true for entries that were just inserted in the dying list. Note that packets / ctnetlink may hold references to conntrack entries that were just inserted to such list. This patch fixes the issue by adding an independent timer for event delivery. This increases the size of the ecache extension. Still we can revisit this later and use variable size extensions to allocate this area on demand. Tested-by:
Oliver Smith <olipro@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa> Signed-off-by:
-
Julian Anastasov authored
commit 283283c4 upstream. After commit 39f618b4 (3.4) "ipvs: reset ipvs pointer in netns" we can oops in ip_vs_dst_event on rmmod ip_vs because ip_vs_control_cleanup is called after the ipvs_core_ops subsys is unregistered and net->ipvs is NULL. Fix it by exiting early from ip_vs_dst_event if ipvs is NULL. It is safe because all services and dests for the net are already freed. Signed-off-by:
-
Matt Carlson authored
commit b7abee6e upstream. 5906 devices also need the short DMA fragment workaround. This patch makes the necessary change. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Tested-by:
Christian Kujau <lists@nerdbynature.de> Signed-off-by:
Mike Pagano <mpagano@gentoo.org>
-
Amerigo Wang authored
commit 5aa8b572 upstream. For IPv6, sizeof(struct ipv6hdr) = 40, thus the following expression will result negative: datalen = pkt_dev->cur_pkt_size - 14 - sizeof(struct ipv6hdr) - sizeof(struct udphdr) - pkt_dev->pkt_overhead; And, the check "if (datalen < sizeof(struct pktgen_hdr))" will be passed as "datalen" is promoted to unsigned, therefore will cause a crash later. This is a quick fix by checking if "datalen" is negative. The following patch will increase the default value of 'min_pkt_size' for IPv6. This bug should exist for a long time, so Cc -stable too. Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
-
Hildner, Christian authored
commit 26cff4e2 upstream. Adding two (or more) timers with large values for "expires" (they have to reside within tv5 in the same list) leads to endless looping between cascade() and internal_add_timer() in case CONFIG_BASE_SMALL is one and jiffies are crossing the value 1 << 18. The bug was introduced between 2.6.11 and 2.6.12 (and survived for quite some time). This patch ensures that when cascade() is called timers within tv5 are not added endlessly to their own list again, instead they are added to the next lower tv level tv4 (as expected). Signed-off-by:
Christian Hildner <christian.hildner@siemens.com> Reviewed-by:
Jan Kiszka <jan.kiszka@siemens.com> Link: http://lkml.kernel.org/r/98673C87CB31274881CFFE0B65ECC87B0F5FC1963E@DEFTHW99EA4MSX.ww902.siemens.netSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Daniel Drake authored
commit 012a1211 upstream. As detailed in the thread titled "viafb PLL/clock tweaking causes XO-1.5 instability," enabling or disabling the IGA1/IGA2 clocks causes occasional stability problems during suspend/resume cycles on this platform. This is rather odd, as the documentation suggests that clocks have two states (on/off) and the default (stable) configuration is configured to enable the clock only when it is needed. However, explicitly enabling *or* disabling the clock triggers this system instability, suggesting that there is a 3rd state at play here. Leaving the clock enable/disable registers alone solves this problem. This fixes spurious reboots during suspend/resume behaviour introduced by commit b692a63a. Signed-off-by:
Daniel Drake <dsd@laptop.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
