- 16 May, 2017 8 commits
-
-
Long Li authored
[ Upstream commit 3cd6d3d9 ] Properly set SRB flags when hosting device supports tagged queuing. This patch improves the performance on Fiber Channel disks. Signed-off-by:
Long Li <longli@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Paul Burton authored
[ Upstream commit 096a0de4 ] is_jump_ins() checks for plain jump ("j") instructions since commit e7438c4b ("MIPS: Fix sibling call handling in get_frame_info") but that commit didn't make the same change to the microMIPS code, leaving it inconsistent with the MIPS32/MIPS64 code. Handle the microMIPS encoding of the jump instruction too such that it behaves consistently. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Fixes: e7438c4b ("MIPS: Fix sibling call handling in get_frame_info") Cc: Tony Wu <tung7970@gmail.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # v3.10+ Patchwork: https://patchwork.linux-mips.org/patch/14533/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Paul Burton authored
[ Upstream commit bb9bc468 ] get_frame_info() calculates the offset of the return address within a stack frame simply by dividing a the bottom 16 bits of the instruction, treated as a signed integer, by the size of a long. Whilst this works for MIPS32 & MIPS64 ISAs where the sw or sd instructions are used, it's incorrect for microMIPS where encodings differ. The result is that we typically completely fail to unwind the stack on microMIPS. Fix this by adjusting is_ra_save_ins() to calculate the return address offset, and take into account the various different encodings there in the same place as we consider whether an instruction is storing the ra/$31 register. With this we are now able to unwind the stack for kernels targetting the microMIPS ISA, for example we can produce: Call Trace: [<80109e1f>] show_stack+0x63/0x7c [<8011ea17>] __warn+0x9b/0xac [<8011ea45>] warn_slowpath_fmt+0x1d/0x20 [<8013fe53>] register_console+0x43/0x314 [<8067c58d>] of_setup_earlycon+0x1dd/0x1ec [<8067f63f>] early_init_dt_scan_chosen_stdout+0xe7/0xf8 [<8066c115>] do_early_param+0x75/0xac [<801302f9>] parse_args+0x1dd/0x308 [<8066c459>] parse_early_options+0x25/0x28 [<8066c48b>] parse_early_param+0x2f/0x38 [<8066e8cf>] setup_arch+0x113/0x488 [<8066c4f3>] start_kernel+0x57/0x328 ---[ end trace 0000000000000000 ]--- Whereas previously we only produced: Call Trace: [<80109e1f>] show_stack+0x63/0x7c ---[ end trace 0000000000000000 ]--- Signed-off-by:
-
Paul Burton authored
[ Upstream commit 67c75057 ] is_jump_ins() checks 16b instruction fields without verifying that the instruction is indeed 16b, as is done by is_ra_save_ins() & is_sp_move_ins(). Add the appropriate check. Signed-off-by:
-
Paul Burton authored
[ Upstream commit b6c7a324 ] get_frame_info() is meant to iterate over up to the first 128 instructions within a function, but for microMIPS kernels it will not reach that many instructions unless the function is 512 bytes long since we calculate the maximum number of instructions to check by dividing the function length by the 4 byte size of a union mips_instruction. In microMIPS kernels this won't do since instructions are variable length. Fix this by instead checking whether the pointer to the current instruction has reached the end of the function, and use max_insns as a simple constant to check the number of iterations against. Signed-off-by:
-
Paul Burton authored
[ Upstream commit a3552dac ] During stack unwinding we call a number of functions to determine what type of instruction we're looking at. The union mips_instruction pointer provided to them may be pointing at a 2 byte, but not 4 byte, aligned address & we thus cannot directly access the 4 byte wide members of the union mips_instruction. To avoid this is_ra_save_ins() copies the required half-words of the microMIPS instruction to a correctly aligned union mips_instruction on the stack, which it can then access safely. The is_jump_ins() & is_sp_move_ins() functions do not correctly perform this temporary copy, and instead attempt to directly dereference 4 byte fields which may be misaligned and lead to an address exception. Fix this by copying the instruction halfwords to a temporary union mips_instruction in get_frame_info() such that we can provide a 4 byte aligned union mips_instruction to the is_*_ins() functions and they do not need to deal with misalignment themselves. Signed-off-by:
-
Paul Burton authored
[ Upstream commit ccaf7caf ] get_frame_info() can be called in microMIPS kernels with the ISA bit already clear. For example this happens when unwind_stack_by_address() is called because we begin with a PC that has the ISA bit set & subtract the (odd) offset from the preceding symbol (which does not have the ISA bit set). Since get_frame_info() unconditionally subtracts 1 from the PC in microMIPS kernels it incorrectly misaligns the address it then attempts to access code at, leading to an address error exception. Fix this by using msk_isa16_mode() to clear the ISA bit, which allows get_frame_info() to function regardless of whether it is provided with a PC that has the ISA bit set or not. Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 721d4845 ] On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading i915 at boot 1 out of every 3 boots, resulting in a non functional LCD. Once the i915 driver has successfully loaded, the panel can be disabled / enabled without hitting this issue. The getting stuck is caused by vlv_init_display_clock_gating() clearing the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled driving the DSI LCD by the BIOS. Clearing this bit while DSI is in use is a known issue and intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it as appropriate. This commit modifies vlv_init_display_clock_gating() to leave the DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck. Changes in v2: -Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and comment Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330 Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161202142904.25613-1-hdegoede@redhat.comSigned-off-by:
-
- 13 Mar, 2017 1 commit
-
-
Sasha Levin authored
Signed-off-by:
-
- 06 Mar, 2017 31 commits
-
-
Nicolas Iooss authored
[ Upstream commit b0996ae4 ] Commit 609e36d3 ("KVM: x86: pass host_initiated to functions that read MSRs") modified kvm_get_msr_common function to use msr_info->data instead of data but missed one occurrence. Replace it and remove the unused local variable. Fixes: 609e36d3 ("KVM: x86: pass host_initiated to functions that read MSRs") Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Haozhong Zhang authored
[ Upstream commit 81b1b9ca ] The current handling of accesses to guest MSR_TSC_AUX returns error if vcpu does not support rdtscp, though those accesses are initiated by host. This can result in the reboot failure of some versions of QEMU. This patch fixes this issue by passing those host initiated accesses for further handling instead. Signed-off-by:
Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by:
-
Paolo Bonzini authored
[ Upstream commit 609e36d3 ] SMBASE is only readable from SMM for the VCPU, but it must be always accessible if userspace is accessing it. Thus, all functions that read MSRs are changed to accept a struct msr_data; the host_initiated and index fields are pre-initialized, while the data field is filled on return. Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Tan Xiaojun authored
Use "proc_dointvec_minmax" instead of "proc_dointvec" to check the input value from user-space. If not, we can set a big value and some vars will overflow like "sysctl_perf_event_sample_rate" which will cause a lot of unexpected problems. Signed-off-by:
Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <acme@kernel.org> Cc: <alexander.shishkin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1487829879-56237-1-git-send-email-tanxiaojun@huawei.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
Markus reported that 0 should also disable the throttling we per Documentation/sysctl/kernel.txt. Reported-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
-
Kan Liang authored
This patch fixes an issue which was introduced by commit: 91a612ee ("perf/core: Fix dynamic interrupt throttle") ... which commit unconditionally sets the perf_sample_allowed_ns value to !0. But that could trigger a bug in the following corner case: The user can disable the dynamic interrupt throttle mechanism by setting perf_cpu_time_max_percent to 0. Then they change perf_event_max_sample_rate. For this case, the mechanism will be enabled implicitly, because perf_sample_allowed_ns becomes !0 - which is not what we want. This patch only updates perf_sample_allowed_ns when the dynamic interrupt throttle mechanism is enabled. Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
-
Peter Zijlstra authored
There were two problems with the dynamic interrupt throttle mechanism, both triggered by the same action. When you (or perf_fuzzer) write a huge value into /proc/sys/kernel/perf_event_max_sample_rate the computed perf_sample_allowed_ns becomes 0. This effectively disables the whole dynamic throttle. This is fixed by ensuring update_perf_cpu_limits() never sets the value to 0. However, we allow disabling of the dynamic throttle by writing 100 to /proc/sys/kernel/perf_cpu_time_max_percent. This will generate a warning in dmesg. The second problem is that by setting the max_sample_rate to a huge number, the adaptive process can take a few tries, since it halfs the limit each time. Change that to directly compute a new value based on the observed duration. Signed-off-by:
-
Al Viro authored
[ Upstream commit 137d01df ] What happens is that a write to /dev/sg is given a request with non-zero ->iovec_count combined with zero ->dxfer_len. Or with ->dxferp pointing to an array full of empty iovecs. Having write permission to /dev/sg shouldn't be equivalent to the ability to trigger BUG_ON() while holding spinlocks... Found by Dmitry Vyukov and syzkaller. [ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the underlying issue. - Linus ] Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Sergey Senozhatsky authored
[ Upstream commit fc98c3c8 ] Use rcuidle console tracepoint because, apparently, it may be issued from an idle CPU: hw-breakpoint: Failed to enable monitor mode on CPU 0. hw-breakpoint: CPU 0 failed to disable vector catch =============================== [ ERR: suspicious RCU usage. ] 4.10.0-rc8-next-20170215+ #119 Not tainted ------------------------------- ./include/trace/events/printk.h:32 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 2, debug_locks = 0 RCU used illegally from extended quiescent state! 2 locks held by swapper/0/0: #0: (cpu_pm_notifier_lock){......}, at: [<c0237e2c>] cpu_pm_exit+0x10/0x54 #1: (console_lock){+.+.+.}, at: [<c01ab350>] vprintk_emit+0x264/0x474 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc8-next-20170215+ #119 Hardware name: Generic OMAP4 (Flattened Device Tree) console_unlock vprintk_emit vprintk_default printk reset_ctrl_regs dbg_cpu_pm_notify notifier_call_chain cpu_pm_exit omap_enter_idle_coupled cpuidle_enter_state cpuidle_enter_state_coupled do_idle cpu_startup_entry start_kernel This RCU warning, however, is suppressed by lockdep_off() in printk(). lockdep_off() increments the ->lockdep_recursion counter and thus disables RCU_LOCKDEP_WARN() and debug_lockdep_rcu_enabled(), which want lockdep to be enabled "current->lockdep_recursion == 0". Link: http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.comSigned-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by:
Tony Lindgren <tony@atomide.com> Tested-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <rmk@armlinux.org.uk> Cc: <stable@vger.kernel.org> [3.4+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Miklos Szeredi authored
[ Upstream commit 5a81e6a1 ] Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the unused part of the pipe ring buffer. Previously splice_to_pipe() left the flags value alone, which could result in incorrect behavior. Uninitialized flags appears to have been there from the introduction of the splice syscall. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # 2.6.17+ Signed-off-by:
-
Michel Dänzer authored
[ Upstream commit d74c67dd ] The crtc_h/vdisplay fields may not match the CRTC viewport dimensions with special modes such as interlaced ones. Fixes the HW cursor disappearing in the bottom half of the screen with interlaced modes. Fixes: 6b16cf77 ("drm/radeon: Hide the HW cursor while it's out of bounds") Cc: stable@vger.kernel.org Reported-by:
Ashutosh Kumar <ashutosh.kumar@amd.com> Tested-by:
Sonny Jiang <sonny.jiang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Kees Cook authored
[ Upstream commit 9e344048 ] The 64-bit get_user() wasn't clearing the high word due to a typo in the error handler. The exception handler entry was already correct, though. Noticed during recent usercopy test additions in lib/test_user_copy.c. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Pierre-Louis Bossart authored
[ Upstream commit bb08c04d ] 100% reproducible issue found on SKL SkullCanyon NUC with two external DP daisy-chained monitors in DP/MST mode. When turning off or changing the input of the second monitor the machine stops with a kernel oops. This issue happened with 4.8.8 as well as drm/drm-intel-nightly. This issue is traced to an inconsistent control flow in drm_dp_update_payload_part1(): the 'port' pointer is set to NULL at the same time as 'req_payload.num_slots' is set to zero, but the pointer is dereferenced even when req_payload.num_slot is zero. The problematic dereference was introduced in commit dfda0df3 ("drm/mst: rework payload table allocation to conform better") and may impact all versions since v3.18 The fix suggested by Chris Wilson removes the kernel oops and was found to work well after 10mn of monkey-testing with the second monitor power and input buttons Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98990 Fixes: dfda0df3 ("drm/mst: rework payload table allocation to conform better.") Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: <stable@vger.kernel.org> # v3.18+ Tested-by:
Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487076561-2169-1-git-send-email-jani.nikula@intel.comSigned-off-by:
-
Mauro Carvalho Chehab authored
[ Upstream commit f9c85ee6 ] Reported as a Kaffeine bug: https://bugs.kde.org/show_bug.cgi?id=375811 The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. On Kernel 4.9, the default is to not accept DMA on stack anymore on x86 architecture. On other architectures, this has been a requirement since Kernel 2.2. So, after this patch, this driver should likely work fine on all archs. Tested with USB ID 2040:5510: Hauppauge Windham Cc: stable@vger.kernel.org Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Anssi Hannula authored
[ Upstream commit 3d4ef329 ] Commit 577fb131 ("mmc: rework selection of bus speed mode") refactored bus width selection code to mmc_select_bus_width(). However, it also altered the behavior to not call the selection code in non-high-speed modes anymore. This causes 1-bit mode to always be used when the high-speed mode is not enabled, even though 4-bit and 8-bit bus are valid bus widths in the backwards-compatibility (legacy) mode as well (see e.g. 5.3.2 Bus Speed Modes in JEDEC 84-B50). This results in a significant regression in transfer speeds. Fix the code to allow 4-bit and 8-bit widths even without high-speed mode, as before. Tested with a Zynq-7000 PicoZed 7020 board. Fixes: 577fb131 ("mmc: rework selection of bus speed mode") Signed-off-by:
Anssi Hannula <anssi.hannula@bitwise.fi> Cc: <stable@vger.kernel.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Yang Yang authored
[ Upstream commit 25f71d1c ] The UEVENT user mode helper is enabled before the initcalls are executed and is available when the root filesystem has been mounted. The user mode helper is triggered by device init calls and the executable might use the futex syscall. futex_init() is marked __initcall which maps to device_initcall, but there is no guarantee that futex_init() is invoked _before_ the first device init call which triggers the UEVENT user mode helper. If the user mode helper uses the futex syscall before futex_init() then the syscall crashes with a NULL pointer dereference because the futex subsystem has not been initialized yet. Move futex_init() to core_initcall so futexes are initialized before the root filesystem is mounted and the usermode helper becomes available. [ tglx: Rewrote changelog ] Signed-off-by:
Yang Yang <yang.yang29@zte.com.cn> Cc: jiang.biao2@zte.com.cn Cc: jiang.zhengxiong@zte.com.cn Cc: zhong.weidong@zte.com.cn Cc: deng.huali@zte.com.cn Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1483085875-6130-1-git-send-email-yang.yang29@zte.com.cnSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Boris Ostrovsky authored
[ Upstream commit 74470954 ] rx_refill_timer should be deleted as soon as we disconnect from the backend since otherwise it is possible for the timer to go off before we get to xennet_destroy_queues(). If this happens we may dereference queue->rx.sring which is set to NULL in xennet_disconnect_backend(). Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: stable@vger.kernel.org Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dave Carroll authored
[ Upstream commit 8af8e1c2 ] commit 78cbccd3 ("aacraid: Fix for KDUMP driver hang") caused a problem on older controllers which do not support MSI-x (namely ASR3405,ASR3805). This patch conditionalizes the previous patch to controllers which support MSI-x Cc: <stable@vger.kernel.org> # v4.7+ Fixes: 78cbccd3 ("aacraid: Fix for KDUMP driver hang") Reported-by:
Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by:
Dave Carroll <david.carroll@microsemi.com> Reviewed-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by:
-
Tejun Heo authored
[ Upstream commit 4d59b6cc ] Commit 513e3d2d ("cpumask: always use nr_cpu_ids in formatting and parsing functions") converted both cpumask printing and parsing functions to use nr_cpu_ids instead of nr_cpumask_bits. While this was okay for the printing functions as it just picked one of the two output formats that we were alternating between depending on a kernel config, doing the same for parsing wasn't okay. nr_cpumask_bits can be either nr_cpu_ids or NR_CPUS. We can always use nr_cpu_ids but that is a variable while NR_CPUS is a constant, so it can be more efficient to use NR_CPUS when we can get away with it. Converting the printing functions to nr_cpu_ids makes sense because it affects how the masks get presented to userspace and doesn't break anything; however, using nr_cpu_ids for parsing functions can incorrectly leave the higher bits uninitialized while reading in these masks from userland. As all testing and comparison functions use nr_cpumask_bits which can be larger than nr_cpu_ids, the parsed cpumasks can erroneously yield false negative results. This made the taskstats interface incorrectly return -EINVAL even when the inputs were correct. Fix it by restoring the parse functions to use nr_cpumask_bits instead of nr_cpu_ids. Link: http://lkml.kernel.org/r/20170206182442.GB31078@htj.duckdns.org Fixes: 513e3d2d ("cpumask: always use nr_cpu_ids in formatting and parsing functions") Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Martin Steigerwald <martin.steigerwald@teamix.de> Debugged-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by:
-
Jeff Mahoney authored
[ Upstream commit 2a362249 ] Commit 4c63c245 incorrectly assumed that returning -ENOIOCTLCMD would cause the native ioctl to be called. The ->compat_ioctl callback is expected to handle all ioctls, not just compat variants. As a result, when using 32-bit userspace on 64-bit kernels, everything except those three ioctls would return -ENOTTY. Fixes: 4c63c245 ("btrfs: bugfix: handle FS_IOC32_{GETFLAGS,SETFLAGS,GETVERSION} in btrfs_ioctl") Cc: stable@vger.kernel.org Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Nicholas Bellinger authored
[ Upstream commit 9b2792c3 ] This patch addresses a long standing bug where the commit phase of COMPARE_AND_WRITE would result in a se_cmd->cmd_kref reference leak if se_cmd->scsi_status returned non SAM_STAT_GOOD. This would manifest first as a lost SCSI response, and eventual hung task during fabric driver logout or re-login, as existing shutdown logic waited for the COMPARE_AND_WRITE se_cmd->cmd_kref to reach zero. To address this bug, compare_and_write_post() has been changed to drop the incorrect !cmd->scsi_status conditional that was preventing *post_ret = 1 for being set during non SAM_STAT_GOOD status. This patch has been tested with SAM_STAT_CHECK_CONDITION status from normal target_complete_cmd() callback path, as well as the incoming __target_execute_cmd() submission failure path when se_cmd->execute_cmd() returns non zero status. Reported-by:
Donald White <dew@datera.io> Cc: Donald White <dew@datera.io> Tested-by:
Gary Guo <ghg@datera.io> Cc: Gary Guo <ghg@datera.io> Reviewed-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
[ Upstream commit 0583c261 ] This patch adds the missing target_complete_cmd() SCSI status parameter change in target_xcopy_do_work(), that was originally missing in commit 926317de. It correctly propigates up the correct SCSI status during EXTENDED_COPY exception cases, instead of always using the hardcoded SAM_STAT_CHECK_CONDITION from original code. This is required for ESX host environments that expect to hit SAM_STAT_RESERVATION_CONFLICT for certain scenarios, and SAM_STAT_CHECK_CONDITION results in non-retriable status for these cases. Reported-by:
Nixon Vincent <nixon.vincent@calsoftinc.com> Tested-by:
-
Takashi Iwai authored
[ Upstream commit 4842e98f ] When a sequencer queue is created in snd_seq_queue_alloc(),it adds the new queue element to the public list before referencing it. Thus the queue might be deleted before the call of snd_seq_queue_use(), and it results in the use-after-free error, as spotted by syzkaller. The fix is to reference the queue object at the right time. Reported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Andrey Ryabinin authored
[ Upstream commit 5351fbb1 ] page_flip_completed() dereferences 'work' variable after executing queue_work(). This is not safe as the 'work' item might be already freed by queued work: BUG: KASAN: use-after-free in page_flip_completed+0x3ff/0x490 at addr ffff8803dc010f90 Call Trace: __asan_report_load8_noabort+0x59/0x80 page_flip_completed+0x3ff/0x490 intel_finish_page_flip_mmio+0xe3/0x130 intel_pipe_handle_vblank+0x2d/0x40 gen8_irq_handler+0x4a7/0xed0 __handle_irq_event_percpu+0xf6/0x860 handle_irq_event_percpu+0x6b/0x160 handle_irq_event+0xc7/0x1b0 handle_edge_irq+0x1f4/0xa50 handle_irq+0x41/0x70 do_IRQ+0x9a/0x200 common_interrupt+0x89/0x89 Freed: kfree+0x113/0x4d0 intel_unpin_work_fn+0x29a/0x3b0 process_one_work+0x79e/0x1b70 worker_thread+0x611/0x1460 kthread+0x241/0x3a0 ret_from_fork+0x27/0x40 Move queue_work() after trace_i915_flip_complete() to fix this. Fixes: e5510fac ("drm/i915: add tracepoints for flip requests & completions") Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: <stable@vger.kernel.org> # v2.6.36+ Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126143211.24013-1-aryabinin@virtuozzo.com (cherry picked from commit 05c41f92) Signed-off-by:
-
Stephen Smalley authored
[ Upstream commit a050a570 ] SELinux tries to support setting/clearing of /proc/pid/attr attributes from the shell by ignoring terminating newlines and treating an attribute value that begins with a NUL or newline as an attempt to clear the attribute. However, the test for clearing attributes has always been wrong; it has an off-by-one error, and this could further lead to reading past the end of the allocated buffer since commit bb646cdb ("proc_pid_attr_write(): switch to memdup_user()"). Fix the off-by-one error. Even with this fix, setting and clearing /proc/pid/attr attributes from the shell is not straightforward since the interface does not support multiple write() calls (so shells that write the value and newline separately will set and then immediately clear the attribute, requiring use of echo -n to set the attribute), whereas trying to use echo -n "" to clear the attribute causes the shell to skip the write() call altogether since POSIX says that a zero-length write causes no side effects. Thus, one must use echo -n to set and echo without -n to clear, as in the following example: $ echo -n unconfined_u:object_r:user_home_t:s0 > /proc/$$/attr/fscreate $ cat /proc/$$/attr/fscreate unconfined_u:object_r:user_home_t:s0 $ echo "" > /proc/$$/attr/fscreate $ cat /proc/$$/attr/fscreate Note the use of /proc/$$ rather than /proc/self, as otherwise the cat command will read its own attribute value, not that of the shell. There are no users of this facility to my knowledge; possibly we should just get rid of it. UPDATE: Upon further investigation it appears that a local process with the process:setfscreate permission can cause a kernel panic as a result of this bug. This patch fixes CVE-2017-2618. Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> [PM: added the update about CVE-2017-2618 to the commit description] Cc: stable@vger.kernel.org # 3.5: d6ea83ecSigned-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit a524c218 ] Reported-by:
Jo-Philipp Wich <jo@mein.io> Fixes: 9aed02fe ("ARC: [arcompact] handle unaligned access delay slot") Cc: linux-kernel@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 37a7ea4a ] snd_seq_pool_done() syncs with closing of all opened threads, but it aborts the wait loop with a timeout, and proceeds to the release resource even if not all threads have been closed. The timeout was 5 seconds, and if you run a crazy stuff, it can exceed easily, and may result in the access of the invalid memory address -- this is what syzkaller detected in a bug report. As a fix, let the code graduate from naiveness, simply remove the loop timeout. BugLink: http://lkml.kernel.org/r/CACT4Y+YdhDV2H5LLzDTJDVF-qiYHUHhtRaW4rbb4gUhTCQB81w@mail.gmail.comReported-by:
-
Michal Hocko authored
[ Upstream commit 5abf186a ] do_generic_file_read() can be told to perform a large request from userspace. If the system is under OOM and the reading task is the OOM victim then it has an access to memory reserves and finishing the full request can lead to the full memory depletion which is dangerous. Make sure we rather go with a short read and allow the killed task to terminate. Link: http://lkml.kernel.org/r/20170201092706.9966-3-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
-
J. Bruce Fields authored
[ Upstream commit 034dd34f ] Olga Kornievskaia says: "I ran into this oops in the nfsd (below) (4.10-rc3 kernel). To trigger this I had a client (unsuccessfully) try to mount the server with krb5 where the server doesn't have the rpcsec_gss_krb5 module built." The problem is that rsci.cred is copied from a svc_cred structure that gss_proxy didn't properly initialize. Fix that. [120408.542387] general protection fault: 0000 [#1] SMP ... [120408.565724] CPU: 0 PID: 3601 Comm: nfsd Not tainted 4.10.0-rc3+ #16 [120408.567037] Hardware name: VMware, Inc. VMware Virtual = Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [120408.569225] task: ffff8800776f95c0 task.stack: ffffc90003d58000 [120408.570483] RIP: 0010:gss_mech_put+0xb/0x20 [auth_rpcgss] ... [120408.584946] ? rsc_free+0x55/0x90 [auth_rpcgss] [120408.585901] gss_proxy_save_rsc+0xb2/0x2a0 [auth_rpcgss] [120408.587017] svcauth_gss_proxy_init+0x3cc/0x520 [auth_rpcgss] [120408.588257] ? __enqueue_entity+0x6c/0x70 [120408.589101] svcauth_gss_accept+0x391/0xb90 [auth_rpcgss] [120408.590212] ? try_to_wake_up+0x4a/0x360 [120408.591036] ? wake_up_process+0x15/0x20 [120408.592093] ? svc_xprt_do_enqueue+0x12e/0x2d0 [sunrpc] [120408.593177] svc_authenticate+0xe1/0x100 [sunrpc] [120408.594168] svc_process_common+0x203/0x710 [sunrpc] [120408.595220] svc_process+0x105/0x1c0 [sunrpc] [120408.596278] nfsd+0xe9/0x160 [nfsd] [120408.597060] kthread+0x101/0x140 [120408.597734] ? nfsd_destroy+0x60/0x60 [nfsd] [120408.598626] ? kthread_park+0x90/0x90 [120408.599448] ret_from_fork+0x22/0x30 Fixes: 1d658336 "SUNRPC: Add RPC based upcall mechanism for RPCGSS auth" Cc: stable@vger.kernel.org Cc: Simo Sorce <simo@redhat.com> Reported-by:
Olga Kornievskaia <kolga@netapp.com> Tested-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Kinglong Mee authored
[ Upstream commit d19fb70d ] nfsd assigns the nfs4_free_lock_stateid to .sc_free in init_lock_stateid(). If nfsd doesn't go through init_lock_stateid() and put stateid at end, there is a NULL reference to .sc_free when calling nfs4_put_stid(ns). This patch let the nfs4_stid.sc_free assignment to nfs4_alloc_stid(). Cc: stable@vger.kernel.org Fixes: 356a95ec "nfsd: clean up races in lock stateid searching..." Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Marcel J.E. Mol authored
[ Upstream commit d07830db ] Seems that ATEN serial-to-usb devices using pl2303 exist with different device ids. This patch adds a missing device ID so it is recognised by the driver. Signed-off-by:
Marcel J.E. Mol <marcel@mesa.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
