- 07 Dec, 2006 40 commits
-
-
Randy Dunlap authored
With I2O_CONFIG=y and I2O_EXT_ADAPTEC=n, kernel build gets: drivers/message/i2o/i2o_config.c:1115: error: 'i2o_cfg_compat_ioctl' undeclared here (not in a function) Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Handle __copy_from_user() return value. Noticed by inspection, not from build warning. Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
Remove the no longer used lockdep_internal(). Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
-
Jan Beulich authored
Despite it being small, there should be the option of making it a module... Signed-off-by:
Jan Beulich <jbeulich@novell.com> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Mingming Cao authored
Hugh Dickins wrote: > Not found anything relevant, but I keep noticing these lines > in ext2_try_to_allocate_with_rsv(), ext3 and ext4 similar: > > } else if (grp_goal > 0 && > (my_rsv->rsv_end - grp_goal + 1) < *count) > try_to_extend_reservation(my_rsv, sb, > *count-my_rsv->rsv_end + grp_goal - 1); > > They're wrong, a no-op in most groups, aren't they? rsv_end is an > absolute block number, whereas grp_goal is group-relative, so the > calculation ought to bring in group_first_block? Or I'm confused. > Signed-off-by:
Mingming Cao <cmm@us.ibm.com> Cc: "linux-ext4@vger.kernel.org" <linux-ext4@vger.kernel.org> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Mingming Cao authored
Hugh Dickins wrote: > Not found anything relevant, but I keep noticing these lines > in ext2_try_to_allocate_with_rsv(), ext3 and ext4 similar: > > } else if (grp_goal > 0 && > (my_rsv->rsv_end - grp_goal + 1) < *count) > try_to_extend_reservation(my_rsv, sb, > *count-my_rsv->rsv_end + grp_goal - 1); > > They're wrong, a no-op in most groups, aren't they? rsv_end is an > absolute block number, whereas grp_goal is group-relative, so the > calculation ought to bring in group_first_block? Or I'm confused. > Signed-off-by:
-
Ingo Molnar authored
There was lots of #ifdef noise in the kernel due to hotcpu_notifier(fn, prio) not correctly marking 'fn' as used in the !HOTPLUG_CPU case, and thus generating compiler warnings of unused symbols, hence forcing people to add #ifdefs. the compiler can skip truly unused functions just fine: text data bss dec hex filename 1624412 728710 3674856 6027978 5bfaca vmlinux.before 1624412 728710 3674856 6027978 5bfaca vmlinux.after [akpm@osdl.org: topology.c fix] Signed-off-by: -
Andrew Morton authored
smp_call_function_single() can deadlock if the caller disabled local interrupts (the target CPU could be spinning on call_lock). Check for that. Why on earth do these functions use spin_lock_bh()?? Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Andi Kleen <ak@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Randy Dunlap authored
smp_call_function_single() needs to be visible in non-SMP builds, to fix: arch/x86_64/kernel/vsyscall.c:283: warning: implicit declaration of function 'smp_call_function_single' Signed-off-by:
-
Masami Hiramatsu authored
When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by:
-
Linas Vepstas authored
Move a block of code from the bottom of the file to the top, which is needed to enable the cleanup. Signed-off-by:
Linas Vepstas <linas@austin.ibm.com> Cc: Ryan S. Arnold <rsa@us.ibm.com> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Mariusz Kozlowski authored
Keeps sparse happy. Signed-of-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Adrian Bunk authored
The scheduled removal of the OSS drivers depending on OSS_OBSOLETE_DRIVER. Signed-off-by:
-
Alexey Dobriyan authored
Looks like, reiserfs_prepare_file_region_for_write() doesn't contain several flush_dcache_page() calls. Found with help from Dmitriy Monakhov <dmonakhov@openvz.org> [akpm@osdl.org: small speedup] Signed-off-by:
Alexey Dobriyan <adobriyan@openvz.org> Cc: Dmitriy Monakhov <dmonakhov@openvz.org> Signed-off-by:
-
Magnus Damm authored
- Define "CORE" string as CORE_STR in single common place. - Include terminating zero in CORE_STR length calculation for elf_buflen. - Use roundup(,4) to include alignment in elf_buflen calculation. [akpm@osdl.org: simplification suggested by Roland] Signed-off-by:
Magnus Damm <magnus@valinux.co.jp> Cc: Daniel Jacobowitz <drow@false.org> Cc: Roland McGrath <roland@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Signed-off-by:
-
Magnus Damm authored
The ELF32 spec says we should plus we include the zero on other platforms. Signed-off-by:
-
Magnus Damm authored
Define elf_addr_t in linux/elf.h. The size of the type is determined using ELF_CLASS. This allows us to remove the defines that today are spread all over .c and .h files. Signed-off-by:
-
suzuki authored
Currently we allocate 64k space on the user stack and use it the msgbuf for sys_{msgrcv,msgsnd} for compat and the results are later copied in user [ by copy_in_user]. This patch introduces helper routines for sys_{msgrcv,msgsnd} as below: do_msgsnd() : Accepts the mtype and user space ptr to the buffer along with the msqid and msgflg. do_msgrcv() : Accepts a kernel space ptr to mtype and a userspace ptr to the buffer. The mtype has to be copied back the user space msgbuf by the caller. These changes avoid the need to allocate the msgsize on the userspace ( thus removing the size limt ) and the overhead of an extra copy_in_user(). Signed-off-by:Suzuki K P <suzuki@in.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Henry Nestler authored
After LOADER_TYPE && INITRD_START are true, the short if-condition for INITRD_START can never be false. Remove unused code from the else condition. Signed-off-by:
Henry Nestler <henry.ne@arcor.de> Signed-off-by:
-
Valdis Kletnieks authored
scripts/ver_linux needed some minor clean-ups, as follows: 1) Add reporting of actual oprofile release 2) Add reporting of actual wireless-tools release 3) Add reporting of actual pcmciautils release Signed-off-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
-
Mike Galbraith authored
Attempts to read() from the non-existent dmesg buffer will return zero and userspace tends to get stuck in a busyloop. So just remove /dev/kmsg altogether if CONFIG_PRINTK=n. Signed-off-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
-
akpm@osdl.org authored
Might make qconf compilable with qt-3.1 as well as qt-3.3 Cc: greg chesson <xtp@google.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Thomas Gleixner authored
The 32 bit implementation of ktime_to_ns returns unsigned value, while the 64 bit version correctly returns an signed value. There is no current user affected by this, but it has to be fixed, as ktime values can be negative. Pointed-out-by:
Helmut Duregger <Helmut.Duregger@student.uibk.ac.at> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Andrey Savochkin authored
In journal=ordered or journal=data mode retry in ext4_prepare_write() breaks the requirements of journaling of data with respect to metadata. The fix is to call commit_write to commit allocated zero blocks before retry. Signed-off-by:
Kirill Korotaev <dev@openvz.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ken Chen <kenneth.w.chen@intel.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Andrey Savochkin authored
In journal=ordered or journal=data mode retry in ext3_prepare_write() breaks the requirements of journaling of data with respect to metadata. The fix is to call commit_write to commit allocated zero blocks before retry. Signed-off-by:
-
Andrew Morton authored
It has no users and it's doubtful that we'll need it again. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Andrew Morton authored
Port commit a090d913 into ext2: All modifications of ->i_flags in inodes that might be visible to somebody else must be under ->i_mutex. That patch fixes ext2 ioctl() setting S_APPEND. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Arnd Bergmann authored
The last thing we agreed on was to remove the macros entirely for 2.6.19, on all architectures. Unfortunately, I think nobody actually _did_ that, so they are still there. [akpm@osdl.org: x86_64 fix] Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Schafer <gschafer@zip.com.au> Signed-off-by:
-
Andrew Morton authored
Do proper error-checking and propagation in drivers/base/memory.c, hence fix __must_check warnings. Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Kristian Kielhofner authored
A driver for the PCEngines WRAP boards (http://www.pcengines.ch), which are very similar to the Soekris net4801 (same NS SC1100 geode reference design). The LEDs on the WRAP are on different GPIO lines and I have modified and copied the net48xx error led support for this. It also includes support for an "extra" led (in addition to error). The three LEDs on the WRAP are at GPIO lines 2,3,18 (WRAP LEDs from left to right). This driver gives access to the second and third LEDs by twiddling GPIO lines 3 & 18. Because these boards are so similar to the net48xx, I basically sed-ed that driver to form the basis for leds-wrap.c. The only changes from leds-net48xx.c are: - #define WRAP_EXTRA_LED_GPIO - name changes - duplicate relevant sections to provide support for the "extra" led - reverse the various *_led_set values. The WRAP is "backwards" from the net48xx, and these needed to be updated for that. [akpm@osdl.org: build fix] Signed-off-by:
Kristian Kielhofner <kris@krisk.org> Acked-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Alan Cox authored
Fix two things. Firstly the unit is "Hz" not "HZ". Secondly it is useful to have 300Hz support when doing multimedia work. 250 is fine for us in Europe but the US frame rate is 30fps (29.99 blah for pedants). 300 gives us a tick divisible by both 25 and 30, and for interlace work 50 and 60. It's also giving similar performance to 250Hz. I'd argue we should remove 250 and add 300, but that might be excess disruption for now. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
Workqueue functions should not leak locks, assert so, printing the last function ran. Use macros in lockdep.h to avoid include dependency pains. [akpm@osdl.org: build fix] Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
-
Adrian Bunk authored
The Coverity checker noted that this was dead code, since in all places above in this function, "err" is immediately checked. Signed-off-by:
-
Ingo Molnar authored
Implement prof=sleep profiling. TASK_UNINTERRUPTIBLE sleeps will be taken as a profile hit, and every millisecond spent sleeping causes a profile-hit for the call site that initiated the sleep. Sample readprofile output on i386: 306 ps2_sendbyte 1.3973 432 call_usermodehelper_keys 1.9548 484 ps2_command 0.6453 790 __driver_attach 4.7879 1593 msleep 44.2500 3976 sync_buffer 64.1290 4076 do_lookup 12.4648 8587 sync_page 122.6714 20820 total 0.0067 (NOTE: architectures need to check whether get_wchan() can be called from deep within the wakeup path.) akpm: we need to mark more functions __sched. lock_sock(), msleep(), others.. akpm: the contention in do_lookup() is a surprise. Presumably doing disk reads for directory contents while holding i_mutex. [akpm@osdl.org: various fixes] Signed-off-by:
-
Vasily Averin authored
Fixed long-lived typo: remount_fs() needs BKL Signed-off-by:
Vasily Averin <vvs@sw.ru> Signed-off-by:
-
Peter Zijlstra authored
Name some of the remaning 'old_style_spin_init' locks Signed-off-by:
-
Peter Zijlstra authored
Add debug_show_held_locks(current) to __might_sleep() and schedule(); this makes finding the offending lock leak easier. Signed-off-by:
-
Phillip Lougher authored
Steve Grubb's fzfuzzer tool (http://people.redhat.com/sgrubb/files/ fsfuzzer-0.6.tar.gz) generates corrupt Cramfs filesystems which cause Cramfs to kernel oops in cramfs_uncompress_block(). The cause of the oops is an unchecked corrupted block length field read by cramfs_readpage(). This patch adds a sanity check to cramfs_readpage() which checks that the block length field is sensible. The (PAGE_CACHE_SIZE << 1) size check is intentional, even though the uncompressed data is not going to be larger than PAGE_CACHE_SIZE, gzip sometimes generates compressed data larger than the original source data. Mkcramfs checks that the compressed size is always less than or equal to PAGE_CACHE_SIZE << 1. Of course Cramfs could use the original uncompressed data in this case, but it doesn't. Signed-off-by:
Phillip Lougher <phillip@lougher.org.uk> Signed-off-by:
-
