- 01 Nov, 2004 20 commits
-
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Adrian Bunk authored
Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
-
David S. Miller authored
into nuts.davemloft.net:/disk1/BK/net-2.6
-
Matthew Wilcox authored
Add light-weight-syscall support to parisc. The first LWS is atomic CAS. Committed-by:Carlos O'Donell <carlos@parisc-linux.org>
-
Matthew Wilcox authored
Add user_space macro, to determine if we are in a user versus kernel space. Committed-by: -
Matthew Wilcox authored
Calling sys_restart_syscall without having taking a signal across a syscall leaves the restart_block uninitialized, allowing malicious user code to crash the kernel. FIX: Define INIT_THREAD_INFO such that restart_block.fn is set to the default do_not_restart_syscall. Committed-by: -
Matthew Wilcox authored
Enable SMP on A500 by default Committed-by:Paul Bame <bame@parisc-linux.org>
-
Matthew Wilcox authored
Fix N class SMP The main fixes are: - memory barriers to our space and control register moves - fix for the N class merced bus problem which can't have more than one PxTLB broadcast outstanding at once - make smp_call_function() wait until the function completes This now boots and runs on a 32MB N4000 in Fort Collins with 2 cpus and discontig mem support. Committed-by:
James Bottomley <jejb@parisc-linux.org> Committed-by:
Randolph Chung <tausq@parisc-linux.org>
-
Matthew Wilcox authored
Add a make install target Committed-by:Matthew Wilcox <willy@parisc-linux.org>
-
Matthew Wilcox authored
PA-RISC does have spinlock debugging and doesn't have the frame pointer option. USERMODE had been added twice to spinlock debugging, so remove that. Committed-by:
-
Matthew Wilcox authored
add some more BL macros and b,l in appropriate places in entry.S to expand the range of our jumps and work around the 64 bit binutils problem where it will allow the jump ranges to go beyond their permitted limits without complaining. Committed-by: -
Matthew Wilcox authored
add HP copyright Committed-by:Grant Grundler <grundler@parisc-linux.org>
-
Matthew Wilcox authored
small debug cleanup Committed-by: -
Matthew Wilcox authored
Merge head64.S and head.S Cleanup 64-bit sp manipulations Committed-by:
Kyle McMartin <kyle@parisc-linux.org> Committed-by:
-
-
Bartlomiej Zolnierkiewicz authored
CONFIG_IDEDMA_PCI_AUTO and CONFIG_IDEDMA_ICS_AUTO Host drivers should deal with broken hardware themselves. Warn if DMA support is enabled but "enable DMA by default" is not. Signed-off-by:Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
"hdx=autotune", "hdx=noautotune": * should be handled by host drivers needing them "idex=autotune", "idex=noautotune": * should die "idex=ata66": * should be handled by host drivers needing it "idex=dma": * works only for: cs5220.c, generic.c, hpt366.c, triflex.c * DMA should be used by default "idex=reset", "idex=serialize": * host drivers should set these settings when needed "idex=base[,ctl[,irq]]": * host drivers should auto-detect correct settings * ordering should be controlled by user-space "ide0=four": * should be handled by ide-generic driver Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Majority of these settings is also available through ioctls. We will deal with the rest during deprecation period. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
From: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
- 31 Oct, 2004 20 commits
-
-
Tero Roponen authored
Without this patch my HP CD-Writer doesn't work. With this applied everything is fine. Signed-off-by:
Tero Roponen <teanropo@cc.jyu.fi> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
bk://kernel.bkbits.net/davem/sparc-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Greg Ungerer authored
Need to include linux/in6.h in m68knommu checksum.h to get a clean compile. All other architectures to this too. Signed-off-by:
Greg Ungerer <gerg@snapgear.com> Signed-off-by:
-
Greg Ungerer authored
Add build support for new CPU families and boards. Specifically for the 527x ColdFire family, and the generic 528x CPU family. Also made the switch to -O1, gives smaller code on m68k and ColdFire platforms. Signed-off-by:
-
Greg Ungerer authored
Completely rework m68knommu do_signal() signal handling code. Changed to use get_signal_to_deliver() properly, and remove un-neccessary local signal type checks. Signed-off-by:
-
Greg Ungerer authored
Add clock rate definitions for newly support ColdFire 527x family of CPU's. And switch to the generic 528x define for the 5280 and 5282 CPU's. Signed-off-by:
-
Greg Ungerer authored
Re-work the udelay() function. On fast ColdFire CPU's we are overflowing in the calculation and getting totally bogus results. On old 68k and ColdFire CPU's we have no 32*32->64 multiply instruction. So we resort to a mul/shift calculation similar to what ARM uses. Signed-off-by:
-
Greg Ungerer authored
Update the m68knommu system call definitions to match the modified syscall table. This will bring it into line with other architectures. Signed-off-by:
-
Greg Ungerer authored
A few updates to the m68knommu configuration: . Made the Morotola 5280 and 5282 support be a common 528x family . Add support for selecting the 527x ColdFire family (5270/5271/5274/5275) . Add support for selecting Freescale M5271EVB board . Add support for selecting Freescale M5275EVB board . Add support for selecting Sneha CPU16B board . Add support for selecting Feith SCALES and CANCAM boards . Fix some gramatical errors in help lines Signed-off-by:
-
Greg Ungerer authored
Create a real non-inlined function for m68knommu udelay(). We can save a little code space this way (and on most uClinux patforms this is a problem). Signed-off-by:
-
Greg Ungerer authored
Couple of updates for ther m68knommu linker script. . Add support for the Freescale M5271EVB and M5275EVB boards . Add support for the Sneha CPU16B board . Changes to use the generic 528x define to 5280 and 5282 base boards . Add the missing param section . Align the ramfs section on a 4k (pseudo page size) boundary Signed-off-by:
-
Greg Ungerer authored
Build the new m68knommu lib function udelay(). Signed-off-by:
-
Greg Ungerer authored
Update the m68knommu system call table to be in line with all other architectures. There is really no reason this needs to be different from any other architecture. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Greg Ungerer authored
Change 5280 and 5282 CPU support to be generic 528x family. Also add support for the new 527x ColdFire family. Signed-off-by:
-
Greg Ungerer authored
Add SIM hardware module definitions for the ColdFire 527x CPU family. Signed-off-by:
-
Matthew Wilcox authored
Looks like Al's patch to sparsify the byteorder code prevented use of the assembler-optimised code. Not that I can blame him -- three underscores are C-coded and two underscores are assembly-optimised.
-
David S. Miller authored
Signed-off-by: -
Hirofumi Ogawa authored
If "utf8" option was specified and app uses VFAT_IOCTL_READDIR_BOTH ioctl, utf8_wcstombs() is used. utf8_wcstombs() doesn't add the nul terminate. Then fat_ioctl_filldir() uses a wrong length of name by strlen(). This patch passes the correct length to fat_ioctl_filldir(), and doesn't use nul terminate anymore. Many helps by Alex Villacís Lasso. Thanks. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Hirofumi Ogawa authored
This is valid state if file was accessed by multiple processes at the same time. Signed-off-by:
-
Linus Torvalds authored
Note to self: any m68k patch that touches a SMP file is likely not worth it. Cset exclude: geert@linux-m68k.org[torvalds]|ChangeSet|20041101000206|42067
-
