- 18 Jan, 2017 9 commits
-
-
Igor Druzhinin authored
vif->lock is used to protect statistics gathering agents from using the queue structure during cleaning. Signed-off-by:
Igor Druzhinin <igor.druzhinin@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Reviewed-by:
Paul Durrant <paul.durrant@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Igor Druzhinin authored
Eliminate memory leaks introduced several years ago by cleaning the queue resources which are allocated on XenBus connection event. Namely, queue structure array and pages used for IO rings. Signed-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== ethtool fix This patchset from Eran contains a fix to ethtool set_channels, where the call to get_channels with an uninitialized parameter might result in garbage fields. It also contains two followup changes in our mlx4/mlx5 Eth drivers. Series generated against net commit: 0faa9cb5 net sched actions: fix refcnt when GETing of action after bind ==================== Signed-off-by:
-
Eran Ben Elisha authored
Boundaries checks for the number of RX and TX should be checked by the caller and not in the driver. Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
Boundaries checks for the number of RX, TX, other and combined channels should be checked by the caller and not in the driver. In addition, remove wrong memset on get channels as it overrides the cmd field in the requester struct. Signed-off-by:
-
Eran Ben Elisha authored
Ethtool channels respond struct was uninitialized when querying device channel boundaries settings. As a result, unreported fields by the driver hold garbage. This may cause sending unsupported params to driver. Fixes: 8bf36862 ('ethtool: ensure channel counts are within bounds ...') Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.10-20170118' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-01-18 this is a pull request for net/master consisting of two patches. In the first patch Einar Jón fixes a NULL-pointer-deref in the c_can_pci driver. In the second patch Yegor Yefremov fixes the clock handling in the ti_hecc driver. ==================== Signed-off-by:
-
Yegor Yefremov authored
In order to make the driver work with the common clock framework, this patch converts the clk_enable()/clk_disable() to clk_prepare_enable()/clk_disable_unprepare(). Also add error checking for clk_prepare_enable(). Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Einar Jón authored
The priv->device pointer for c_can_pci is never set, but it is used without a NULL check in c_can_start(). Setting it in c_can_pci_probe() like c_can_plat_probe() prevents c_can_pci.ko from crashing, with and without CONFIG_PM. This might also cause the pm_runtime_*() functions in c_can.c to actually be executed for c_can_pci devices - they are the only other place where priv->device is used, but they all contain a null check. Signed-off-by:
Einar Jón <tolvupostur@gmail.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
- 17 Jan, 2017 10 commits
-
-
Alvaro G. M authored
This PHY with fiber support is register compatible with DP83848, so add support for it. Signed-off-by:
Alvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by:
-
Martin KaFai Lau authored
test_lru_sanity5() fails when the number of online cpus is fewer than the number of possible cpus. It can be reproduced with qemu by using cmd args "--smp cpus=2,maxcpus=8". The problem is the loop in test_lru_sanity5() is testing 'i' which is incorrect. This patch: 1. Make sched_next_online() always return -1 if it cannot find a next cpu to schedule the process. 2. In test_lru_sanity5(), the parent process does sched_setaffinity() first (through sched_next_online()) and the forked process will inherit it according to the 'man sched_setaffinity'. Fixes: 5db58faf ("bpf: Add tests for the LRU bpf_htab") Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Lance Richardson authored
vxlan->cfg.dst_port is in network byte order, so an htons() is needed here. Also reduced comment length to stay closer to 80 column width (still slightly over, however). Fixes: e1e5314d ("vxlan: implement GPE") Signed-off-by:
Lance Richardson <lrichard@redhat.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Julia Lawall authored
The function stmmac_dt_phy provides several possibilities for initializing plat->mdio_node, all of which have the effect of increasing the reference count of the assigned value. This field is not updated elsewhere, so the value is live until the end of the lifetime of plat (devm_allocated), just after the end of stmmac_remove_config_dt. Thus, add an of_node_put on plat->mdio_node in stmmac_remove_config_dt. It is possible that the field mdio_node is never initialized, but of_node_put is NULL-safe, so it is also safe to call of_node_put in that case. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
Rolf Neugebauer authored
This patch part reverts fd2a0437 and e858fae2 which introduced a subtle change in how the virtio_net flags are derived from the SKBs ip_summed field. With the above commits, the flags are set to VIRTIO_NET_HDR_F_DATA_VALID when ip_summed == CHECKSUM_UNNECESSARY, thus treating it differently to ip_summed == CHECKSUM_NONE, which should be the same. Further, the virtio spec 1.0 / CS04 explicitly says that VIRTIO_NET_HDR_F_DATA_VALID must not be set by the driver. Fixes: fd2a0437 ("virtio_net: introduce virtio_net_hdr_{from,to}_skb") Fixes: e858fae2 (" virtio_net: use common code for virtio_net_hdr and skb GSO conversion") Signed-off-by:
Rolf Neugebauer <rolf.neugebauer@docker.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Handle multicast packets properly in fast-RX path of mac80211, from Johannes Berg. 2) Because of a logic bug, the user can't actually force SW checksumming on r8152 devices. This makes diagnosis of hw checksumming bugs really annoying. Fix from Hayes Wang. 3) VXLAN route lookup does not take the source and destination ports into account, which means IPSEC policies cannot be matched properly. Fix from Martynas Pumputis. 4) Do proper RCU locking in netvsc callbacks, from Stephen Hemminger. 5) Fix SKB leaks in mlxsw driver, from Arkadi Sharshevsky. 6) If lwtunnel_fill_encap() fails, we do not abort the netlink message construction properly in fib_dump_info(), from David Ahern. 7) Do not use kernel stack for DMA buffers in atusb driver, from Stefan Schmidt. 8) Openvswitch conntack actions need to maintain a correct checksum, fix from Lance Richardson. 9) ax25_disconnect() is missing a check for ax25->sk being NULL, in fact it already checks this, but not in all of the necessary spots. Fix from Basil Gunn. 10) Action GET operations in the packet scheduler can erroneously bump the reference count of the entry, making it unreleasable. Fix from Jamal Hadi Salim. Jamal gives a great set of example command lines that trigger this in the commit message. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) net sched actions: fix refcnt when GETing of action after bind net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions net/mlx4_core: Fix racy CQ (Completion Queue) free net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered net/mlx5e: Fix a -Wmaybe-uninitialized warning ax25: Fix segfault after sock connection timeout bpf: rework prog_digest into prog_tag tipc: allocate user memory with GFP_KERNEL flag net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types ip6_tunnel: Account for tunnel header in tunnel MTU mld: do not remove mld souce list info when set link down be2net: fix MAC addr setting on privileged BE3 VFs be2net: don't delete MAC on close on unprivileged BE3 VFs be2net: fix status check in be_cmd_pmac_add() cpmac: remove hopeless #warning ravb: do not use zero-length alignment DMA descriptor mlx4: do not call napi_schedule() without care openvswitch: maintain correct checksum state in conntrack actions tcp: fix tcp_fastopen unaligned access complaints on sparc ... -
Linus Torvalds authored
Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "A tiny fix to make sure that page-sized mappings are page-aligned (and not say straddle two pages). This is important for some drivers (such as NVME)" * 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: ensure that page-sized mappings are page-aligned
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - fix regressions detecting HS/HS DDR eMMC cards related to CMD6 MMC host: - mmc: mxs-mmc: Fix additional cycles after transmission stop - sdhci-acpi: Only powered up enabled acpi child devices - meson: avoid possible NULL dereference" * tag 'mmc-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Restore parts of the polling policy when switch to HS/HS DDR mmc: mxs-mmc: Fix additional cycles after transmission stop mmc: sdhci-acpi: Only powered up enabled acpi child devices MMC: meson: avoid possible NULL dereference
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from Brian Norris: "Just NAND updates from Boris: - avoid compiling xway NAND controller driver as a module (which didn't work) - fix tango NAND DT binding and make sure the controller is in a clean state at probe time - add dependency on HAS_IOMEM to the oxnas NAND driver - fix irq number validity check in the lpc32xx driver" * tag 'for-linus-20170116' of git://git.infradead.org/linux-mtd: mtd: nand: lpc32xx: fix invalid error handling of a requested irq mtd: nand: tango: Reset pbus to raw mode in probe mtd: nand: tango: Update DT binding description mtd: nand: oxnas_nand: fix build errors on arch/um, require HAS_IOMEM mtd: nand: xway: fix build because of module functions mtd: nand: xway: disable module support -
Jamal Hadi Salim authored
Demonstrating the issue: .. add a drop action $sudo $TC actions add action drop index 10 .. retrieve it $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 0 installed 29 sec used 29 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... bug 1 above: reference is two. Reference is actually 1 but we forget to subtract 1. ... do a GET again and we see the same issue try a few times and nothing changes ~$ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 0 installed 31 sec used 31 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... lets try to bind the action to a filter.. $ sudo $TC qdisc add dev lo ingress $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \ u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10 ... and now a few GETs: $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 3 bind 1 installed 204 sec used 204 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 4 bind 1 installed 206 sec used 206 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 5 bind 1 installed 235 sec used 235 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 .... as can be observed the reference count keeps going up. After the fix $ sudo $TC actions add action drop index 10 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 1 bind 0 installed 4 sec used 4 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 1 bind 0 installed 6 sec used 6 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC qdisc add dev lo ingress $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \ u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 1 installed 32 sec used 32 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 1 installed 33 sec used 33 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 Fixes: aecc5cef ("net sched actions: fix GETing actions") Signed-off-by:Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
- 16 Jan, 2017 21 commits
-
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: - fix invalid fget()/fput() calls when doing file locking - fix multiple directory cache invalidation issues due to the client failing to recognise that the directory wasn't changed - fix client recovery when server reboots multiple times * tag 'nfs-for-4.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix client recovery when server reboots multiple times NFSv4: update_changeattr should update the attribute timestamp NFSv4: Don't call update_changeattr() unless the unlink is successful NFSv4: Don't apply change_info4 twice on rename within a directory NFSv4: Call update_changeattr() from _nfs4_proc_open only if a file was created nfs: Don't take a reference on fl->fl_file for LOCK operation
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4 core fixes This patchset contains bug fixes from Jack to the mlx4 Core driver. Patch 1 solves a race in the flow of CQ free. Patch 2 moves some qp context flags update to the correct qp transition. Patch 3 eliminates warnings from the path of SRQ_LIMIT that flood the message log, and keeps them only in the path of SRQ_CATAS_ERROR. Series generated against net commit: 1a717fcf Merge tag 'mac80211-for-davem-2017-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 ==================== Signed-off-by:
-
Jack Morgenstein authored
When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's message log when (correct, normally operating) apps use SRQ LIMIT events as a trigger to post WQEs to SRQs. Add more information to the existing debug printout for SRQ_LIMIT, and output the warning messages only for the SRQ CATAS ERROR event. Fixes: acba2420 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs") Fixes: e0debf9c ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Jack Morgenstein authored
Save the qp context flags byte containing the flag disabling vlan stripping in the RESET to INIT qp transition, rather than in the INIT to RTR transition. Per the firmware spec, the flags in this byte are active in the RESET to INIT transition. As a result of saving the flags in the incorrect qp transition, when switching dynamically from VGT to VST and back to VGT, the vlan remained stripped (as is required for VST) and did not return to not-stripped (as is required for VGT). Fixes: f0f829bf ("net/mlx4_core: Add immediate activate for VGT->VST->VGT") Signed-off-by:
-
Jack Morgenstein authored
In function mlx4_cq_completion() and mlx4_cq_event(), the radix_tree_lookup requires a rcu_read_lock. This is mandatory: if another core frees the CQ, it could run the radix_tree_node_rcu_free() call_rcu() callback while its being used by the radix tree lookup function. Additionally, in function mlx4_cq_event(), since we are adding the rcu lock around the radix-tree lookup, we no longer need to take the spinlock. Also, the synchronize_irq() call for the async event eliminates the need for incrementing the cq reference count in mlx4_cq_event(). Other changes: 1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock: we no longer take this spinlock in the interrupt context. The spinlock here, therefore, simply protects against different threads simultaneously invoking mlx4_cq_free() for different cq's. 2. In function mlx4_cq_free(), we move the radix tree delete to before the synchronize_irq() calls. This guarantees that we will not access this cq during any subsequent interrupts, and therefore can safely free the CQ after the synchronize_irq calls. The rcu_read_lock in the interrupt handlers only needs to protect against corrupting the radix tree; the interrupt handlers may access the cq outside the rcu_read_lock due to the synchronize_irq calls which protect against premature freeing of the cq. 3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg. 4. We leave the cq reference count mechanism in place, because it is still needed for the cq completion tasklet mechanism. Fixes: 6d90aa5c ("net/mlx4_core: Make sure there are no pending async events when freeing CQ") Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Heiner Kallweit authored
Don't use netdev_info and friends before the net_device is registered. This avoids ugly messages like "meson8b-dwmac c9410000.ethernet (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer" Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
As found by Olof's build bot, we gain a harmless warning about a potential uninitialized variable reference in mlx5: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c: In function 'parse_tc_fdb_actions': drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:769:13: warning: 'out_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:811:21: note: 'out_dev' was declared here This was introduced through the addition of an 'IS_ERR/PTR_ERR' pair that gcc is unfortunately unable to completely figure out. The problem being gcc cannot tell that if(IS_ERR()) in mlx5e_route_lookup_ipv4() is equivalent to checking if(err) later, so it assumes that 'out_dev' is used after the 'return PTR_ERR(rt)'. The PTR_ERR_OR_ZERO() case by comparison is fairly easy to detect by gcc, so it can't get that wrong, so it no longer warns. Hadar Hen Zion already attempted to fix the warning earlier by adding fake initializations, but that ended up not fully addressing all warnings, so I'm reverting it now that it is no longer needed. Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.10-rc3-98-gcff3b2c/ Fixes: a42485eb ("net/mlx5e: TC ipv4 tunnel encap offload error flow fixes") Fixes: a757d108 ("net/mlx5e: Fix kbuild warnings for uninitialized parameters") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Basil Gunn authored
The ax.25 socket connection timed out & the sock struct has been previously taken down ie. sock struct is now a NULL pointer. Checking the sock_flag causes the segfault. Check if the socket struct pointer is NULL before checking sock_flag. This segfault is seen in timed out netrom connections. Please submit to -stable. Signed-off-by:
Basil Gunn <basil@pacabunga.com> Signed-off-by:
-
Daniel Borkmann authored
Commit 7bd509e3 ("bpf: add prog_digest and expose it via fdinfo/netlink") was recently discussed, partially due to admittedly suboptimal name of "prog_digest" in combination with sha1 hash usage, thus inevitably and rightfully concerns about its security in terms of collision resistance were raised with regards to use-cases. The intended use cases are for debugging resp. introspection only for providing a stable "tag" over the instruction sequence that both kernel and user space can calculate independently. It's not usable at all for making a security relevant decision. So collisions where two different instruction sequences generate the same tag can happen, but ideally at a rather low rate. The "tag" will be dumped in hex and is short enough to introspect in tracepoints or kallsyms output along with other data such as stack trace, etc. Thus, this patch performs a rename into prog_tag and truncates the tag to a short output (64 bits) to make it obvious it's not collision-free. Should in future a hash or facility be needed with a security relevant focus, then we can think about requirements, constraints, etc that would fit to that situation. For now, rework the exposed parts for the current use cases as long as nothing has been released yet. Tested on x86_64 and s390x. Fixes: 7bd509e3 ("bpf: add prog_digest and expose it via fdinfo/netlink") Signed-off-by:
-
Parthasarathy Bhuvaragan authored
Until now, we allocate memory always with GFP_ATOMIC flag. When the system is under memory pressure and a user tries to send, the send fails due to low memory. However, the user application can wait for free memory if we allocate it using GFP_KERNEL flag. In this commit, we use allocate memory with GFP_KERNEL for all user allocation. Reported-by:
Rune Torgersen <runet@innovsys.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
-
Karicheri, Muralidharan authored
Currently dp83867 driver returns error if phy interface type PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID. Fix this by checking also the interface type if a particular delay value is missing in the phy dt bindings. Also update the DT document accordingly. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Jakub Sitnicki authored
With ip6gre we have a tunnel header which also makes the tunnel MTU smaller. We need to reserve room for it. Previously we were using up space reserved for the Tunnel Encapsulation Limit option header (RFC 2473). Also, after commit b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") our contract with the caller has changed. Now we check if the packet length exceeds the tunnel MTU after the tunnel header has been pushed, unlike before. This is reflected in the check where we look at the packet length minus the size of the tunnel header, which is already accounted for in tunnel MTU. Fixes: b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") Signed-off-by:
Jakub Sitnicki <jkbs@redhat.com> Signed-off-by:
-
Hangbin Liu authored
This is an IPv6 version of commit 24803f38 ("igmp: do not remove igmp souce list..."). In mld_del_delrec(), we will restore back all source filter info instead of flush them. Move mld_clear_delrec() from ipv6_mc_down() to ipv6_mc_destroy_dev() since we should not remove source list info when set link down. Remove igmp6_group_dropped() in ipv6_mc_destroy_dev() since we have called it in ipv6_mc_down(). Also clear all source info after igmp6_group_dropped() instead of in it because ipv6_mc_down() will call igmp6_group_dropped(). Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fixes from Bruce Fields: "Miscellaneous nfsd bugfixes, one for a 4.10 regression, three for older bugs" * tag 'nfsd-4.10-1' of git://linux-nfs.org/~bfields/linux: svcrdma: avoid duplicate dma unmapping during error recovery sunrpc: don't call sleeping functions from the notifier block callbacks svcrpc: don't leak contexts on PROC_DESTROY nfsd: fix supported attributes for acl & labels
-
Ivan Vecera authored
During interface opening MAC address stored in netdev->dev_addr is programmed in the HW with exception of BE3 VFs where the initial MAC is programmed by parent PF. This is OK when MAC address is not changed when an interfaces is down. In this case the requested MAC is stored to netdev->dev_addr and later is stored into HW during opening. But this is not done for all BE3 VFs so the NIC HW does not know anything about this change and all traffic is filtered. This is the case of bonding if fail_over_mac == 0 where the MACs of the slaves are changed while they are down. The be2net behavior is too restrictive because if a BE3 VF has the FILTMGMT privilege then it is able to modify its MAC without any restriction. To solve the described problem the driver should take care about these privileged BE3 VFs so the MAC is programmed during opening. And by contrast unpriviled BE3 VFs should not be allowed to change its MAC in any case. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Ivan Vecera <cera@cera.cz> Signed-off-by:
-
Ivan Vecera authored
BE3 VFs without FILTMGMT privilege are not allowed to modify its MAC, VLAN table and UC/MC lists. So don't try to delete MAC on such VFs. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Ivan Vecera authored
Return value from be_mcc_notify_wait() contains a base completion status together with an additional status. The base_status() macro need to be used to access base status. Fixes: e3a7ae2c be2net: Changing MAC Address of a VF was broken Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Arnd Bergmann authored
The #warning was present 10 years ago when the driver first got merged. As the platform is rather obsolete by now, it seems very unlikely that the warning will cause anyone to fix the code properly. kernelci.org reports the warning for every build in the meantime, so I think it's better to just turn it into a code comment to reduce noise. Signed-off-by:
-
Masaru Nagai authored
Due to alignment requirements of the hardware transmissions are split into two DMA descriptors, a small padding descriptor of 0 - 3 bytes in length followed by a descriptor for rest of the packet. In the case of IP packets the first descriptor will never be zero due to the way that the stack aligns buffers for IP packets. However, for non-IP packets it may be zero. In that case it has been reported that timeouts occur, presumably because transmission stops at the first zero-length DMA descriptor and thus the packet is not transmitted. However, in my environment a BUG is triggered as follows: [ 20.381417] ------------[ cut here ]------------ [ 20.386054] kernel BUG at lib/swiotlb.c:495! [ 20.390324] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 20.395805] Modules linked in: [ 20.398862] CPU: 0 PID: 2089 Comm: mz Not tainted 4.10.0-rc3-00001-gf13ad2db193f #162 [ 20.406689] Hardware name: Renesas Salvator-X board based on r8a7796 (DT) [ 20.413474] task: ffff80063b1f1900 task.stack: ffff80063a71c000 [ 20.419404] PC is at swiotlb_tbl_map_single+0x178/0x2ec [ 20.424625] LR is at map_single+0x4c/0x98 [ 20.428629] pc : [<ffff00000839c4c0>] lr : [<ffff00000839c680>] pstate: 800001c5 [ 20.436019] sp : ffff80063a71f9b0 [ 20.439327] x29: ffff80063a71f9b0 x28: ffff80063a20d500 [ 20.444636] x27: ffff000008ed5000 x26: 0000000000000000 [ 20.449944] x25: 000000067abe2adc x24: 0000000000000000 [ 20.455252] x23: 0000000000200000 x22: 0000000000000001 [ 20.460559] x21: 0000000000175ffe x20: ffff80063b2a0010 [ 20.465866] x19: 0000000000000000 x18: 0000ffffcae6fb20 [ 20.471173] x17: 0000ffffa09ba018 x16: ffff0000087c8b70 [ 20.476480] x15: 0000ffffa084f588 x14: 0000ffffa09cfa14 [ 20.481787] x13: 0000ffffcae87ff0 x12: 000000000063abe2 [ 20.487098] x11: ffff000008096360 x10: ffff80063abe2adc [ 20.492407] x9 : 0000000000000000 x8 : 0000000000000000 [ 20.497718] x7 : 0000000000000000 x6 : ffff000008ed50d0 [ 20.503028] x5 : 0000000000000000 x4 : 0000000000000001 [ 20.508338] x3 : 0000000000000000 x2 : 000000067abe2adc [ 20.513648] x1 : 00000000bafff000 x0 : 0000000000000000 [ 20.518958] [ 20.520446] Process mz (pid: 2089, stack limit = 0xffff80063a71c000) [ 20.526798] Stack: (0xffff80063a71f9b0 to 0xffff80063a720000) [ 20.532543] f9a0: ffff80063a71fa30 ffff00000839c680 [ 20.540374] f9c0: ffff80063b2a0010 ffff80063b2a0010 0000000000000001 0000000000000000 [ 20.548204] f9e0: 000000000000006e ffff80063b23c000 ffff80063b23c000 0000000000000000 [ 20.556034] fa00: ffff80063b23c000 ffff80063a20d500 000000013b1f1900 0000000000000000 [ 20.563864] fa20: ffff80063ffd18e0 ffff80063b2a0010 ffff80063a71fa60 ffff00000839cd10 [ 20.571694] fa40: ffff80063b2a0010 0000000000000000 ffff80063ffd18e0 000000067abe2adc [ 20.579524] fa60: ffff80063a71fa90 ffff000008096380 ffff80063b2a0010 0000000000000000 [ 20.587353] fa80: 0000000000000000 0000000000000001 ffff80063a71fac0 ffff00000864f770 [ 20.595184] faa0: ffff80063b23caf0 0000000000000000 0000000000000000 0000000000000140 [ 20.603014] fac0: ffff80063a71fb60 ffff0000087e6498 ffff80063a20d500 ffff80063b23c000 [ 20.610843] fae0: 0000000000000000 ffff000008daeaf0 0000000000000000 ffff000008daeb00 [ 20.618673] fb00: ffff80063a71fc0c ffff000008da7000 ffff80063b23c090 ffff80063a44f000 [ 20.626503] fb20: 0000000000000000 ffff000008daeb00 ffff80063a71fc0c ffff000008da7000 [ 20.634333] fb40: ffff80063b23c090 0000000000000000 ffff800600000037 ffff0000087e63d8 [ 20.642163] fb60: ffff80063a71fbc0 ffff000008807510 ffff80063a692400 ffff80063a20d500 [ 20.649993] fb80: ffff80063a44f000 ffff80063b23c000 ffff80063a69249c 0000000000000000 [ 20.657823] fba0: 0000000000000000 ffff80063a087800 ffff80063b23c000 ffff80063a20d500 [ 20.665653] fbc0: ffff80063a71fc10 ffff0000087e67dc ffff80063a20d500 ffff80063a692400 [ 20.673483] fbe0: ffff80063b23c000 0000000000000000 ffff80063a44f000 ffff80063a69249c [ 20.681312] fc00: ffff80063a5f1a10 000000103a087800 ffff80063a71fc70 ffff0000087e6b24 [ 20.689142] fc20: ffff80063a5f1a80 ffff80063a71fde8 000000000000000f 00000000000005ea [ 20.696972] fc40: ffff80063a5f1a10 0000000000000000 000000000000000f ffff00000887fbd0 [ 20.704802] fc60: fffffff43a5f1a80 0000000000000000 ffff80063a71fc80 ffff000008880240 [ 20.712632] fc80: ffff80063a71fd90 ffff0000087c7a34 ffff80063afc7180 0000000000000000 [ 20.720462] fca0: 0000ffffcae6fe18 0000000000000014 0000000060000000 0000000000000015 [ 20.728292] fcc0: 0000000000000123 00000000000000ce ffff0000088d2000 ffff80063b1f1900 [ 20.736122] fce0: 0000000000008933 ffff000008e7cb80 ffff80063a71fd80 ffff0000087c50a4 [ 20.743951] fd00: 0000000000008933 ffff000008e7cb80 ffff000008e7cb80 000000100000000e [ 20.751781] fd20: ffff80063a71fe4c 0000ffff00000300 0000000000000123 0000000000000000 [ 20.759611] fd40: 0000000000000000 ffff80063b1f0000 000000000000000e 0000000000000300 [ 20.767441] fd60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 20.775271] fd80: 0000000000000000 0000000000000000 ffff80063a71fda0 ffff0000087c8c20 [ 20.783100] fda0: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.790930] fdc0: ffffffffffffffff 0000ffffa0903078 0000000000000000 000000001ea87232 [ 20.798760] fde0: 000000000000000f ffff80063a71fe40 ffff800600000014 ffff000000000001 [ 20.806590] fe00: 0000000000000000 0000000000000000 ffff80063a71fde8 0000000000000000 [ 20.814420] fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 [ 20.822249] fe40: 0000000203000011 0000000000000000 0000000000000000 ffff80063a68aa00 [ 20.830079] fe60: ffff80063a68aa00 0000000000000003 0000000000008933 ffff0000081f1b9c [ 20.837909] fe80: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.845739] fea0: ffffffffffffffff 0000ffffa07ca81c 0000000060000000 0000000000000015 [ 20.853569] fec0: 0000000000000003 000000001ea87232 000000000000000f 0000000000000000 [ 20.861399] fee0: 0000ffffcae6fe18 0000000000000014 0000000000000300 0000000000000000 [ 20.869228] ff00: 00000000000000ce 0000000000000000 00000000ffffffff 0000000000000000 [ 20.877059] ff20: 0000000000000002 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 20.884888] ff40: 0000000000000000 0000ffffa09ba018 0000ffffcae6fb20 000000001ea87010 [ 20.892718] ff60: 0000ffffa09b9000 0000ffffcae6fe30 0000ffffcae6fe18 000000000000000f [ 20.900548] ff80: 0000000000000003 000000001ea87232 0000000000000000 0000000000000000 [ 20.908378] ffa0: 0000000000000000 0000ffffcae6fdc0 0000ffffa09a7824 0000ffffcae6fdc0 [ 20.916208] ffc0: 0000ffffa0903078 0000000060000000 0000000000000003 00000000000000ce [ 20.924038] ffe0: 0000000000000000 0000000000000000 ffffffffffffffff ffffffffffffffff [ 20.931867] Call trace: [ 20.934312] Exception stack(0xffff80063a71f7e0 to 0xffff80063a71f910) [ 20.940750] f7e0: 0000000000000000 0001000000000000 ffff80063a71f9b0 ffff00000839c4c0 [ 20.948580] f800: ffff80063a71f840 ffff00000888a6e4 ffff80063a24c418 ffff80063a24c448 [ 20.956410] f820: 0000000000000000 ffff00000811cd54 ffff80063a71f860 ffff80063a24c458 [ 20.964240] f840: ffff80063a71f870 ffff00000888b258 ffff80063a24c418 0000000000000001 [ 20.972070] f860: ffff80063a71f910 ffff80063a7b7028 ffff80063a71f890 ffff0000088825e4 [ 20.979899] f880: 0000000000000000 00000000bafff000 000000067abe2adc 0000000000000000 [ 20.987729] f8a0: 0000000000000001 0000000000000000 ffff000008ed50d0 0000000000000000 [ 20.995560] f8c0: 0000000000000000 0000000000000000 ffff80063abe2adc ffff000008096360 [ 21.003390] f8e0: 000000000063abe2 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 21.011219] f900: ffff0000087c8b70 0000ffffa09ba018 [ 21.016097] [<ffff00000839c4c0>] swiotlb_tbl_map_single+0x178/0x2ec [ 21.022362] [<ffff00000839c680>] map_single+0x4c/0x98 [ 21.027411] [<ffff00000839cd10>] swiotlb_map_page+0xa4/0x138 [ 21.033072] [<ffff000008096380>] __swiotlb_map_page+0x20/0x7c [ 21.038821] [<ffff00000864f770>] ravb_start_xmit+0x174/0x668 [ 21.044484] [<ffff0000087e6498>] dev_hard_start_xmit+0x8c/0x120 [ 21.050407] [<ffff000008807510>] sch_direct_xmit+0x108/0x1a0 [ 21.056064] [<ffff0000087e67dc>] __dev_queue_xmit+0x194/0x4cc [ 21.061807] [<ffff0000087e6b24>] dev_queue_xmit+0x10/0x18 [ 21.067214] [<ffff000008880240>] packet_sendmsg+0xf40/0x1220 [ 21.072873] [<ffff0000087c7a34>] sock_sendmsg+0x18/0x2c [ 21.078097] [<ffff0000087c8c20>] SyS_sendto+0xb0/0xf0 [ 21.083150] [<ffff000008082f30>] el0_svc_naked+0x24/0x28 [ 21.088462] Code: d34bfef7 2a1803f3 1a9f86d6 35fff878 (d4210000) [ 21.094611] ---[ end trace 5bc544ad491f3814 ]--- [ 21.099234] Kernel panic - not syncing: Fatal exception in interrupt [ 21.105587] Kernel Offset: disabled [ 21.109073] Memory Limit: none [ 21.112126] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Fixes: 2f45d190 ("ravb: minimize TX data copying") Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Eric Dumazet authored
Disable BH around the call to napi_schedule() to avoid following warning [ 52.095499] NOHZ: local_softirq_pending 08 [ 52.421291] NOHZ: local_softirq_pending 08 [ 52.608313] NOHZ: local_softirq_pending 08 Fixes: 8d59de8f ("net/mlx4_en: Process all completions in RX rings after port goes up") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2017-01-16 Here are a couple of important 802.15.4 driver fixes for the 4.10 kernel. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
