Switch to the modern style of printing kernel messages. Use %u instead
of %d to print unsigned integers.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231213194702.90381-1-bvanassche@acm.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Before calling add partition or resize partition, there is no check
on whether the length is aligned with the logical block size.
If the logical block size of the disk is larger than 512 bytes,
then the partition size maybe not the multiple of the logical block size,
and when the last sector is read, bio_truncate() will adjust the bio size,
resulting in an IO error if the size of the read command is smaller than
the logical block size.If integrity data is supported, this will also
result in a null pointer dereference when calling bio_integrity_free.

Cc:  <stable@vger.kernel.org>
Signed-off-by: Min Li <min15.li@samsung.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230629142517.121241-1-min15.li@samsung.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

On the error path of device_add_disk(), device's memalloc_noio flag was
set but not cleared. As the comment of pm_runtime_set_memalloc_noio(),
"The function should be called between device_add() and device_del()".
Clear this flag before device_del() now.

Fixes: 25e823c8 ("block/genhd.c: apply pm_runtime_set_memalloc_noio on block devices")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231211075356.1839282-1-linan666@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Since "dev_search_path" can technically be as large as PATH_MAX,
there was a risk of truncation when copying it and a second string
into "full_path" since it was also PATH_MAX sized. The W=1 builds were
reporting this warning:

drivers/block/rnbd/rnbd-srv.c: In function 'process_msg_open.isra':
drivers/block/rnbd/rnbd-srv.c:616:51: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size between 0 and 4095 [-Wformat-truncation=]
  616 |                 snprintf(full_path, PATH_MAX, "%s/%s",
      |                                                   ^~
In function 'rnbd_srv_get_full_path',
    inlined from 'process_msg_open.isra' at drivers/block/rnbd/rnbd-srv.c:721:14: drivers/block/rnbd/rnbd-srv.c:616:17: note: 'snprintf' output between 2 and 4351 bytes into a destination of size 4096
  616 |                 snprintf(full_path, PATH_MAX, "%s/%s",
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  617 |                          dev_search_path, dev_name);
      |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~

To fix this, unconditionally check for truncation (as was already done
for the case where "%SESSNAME%" was present).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312100355.lHoJPgKy-lkp@intel.com/
Cc: Md. Haris Iqbal <haris.iqbal@ionos.com>
Cc: Jack Wang <jinpu.wang@ionos.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc:  <linux-block@vger.kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20231212214738.work.169-kees@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'md-next-20231208' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.8/block

Pull MD updates from Song:

"1. Fix/Cleanup RCU usage from conf->disks[i].rdev, by Yu Kuai;
 2. Fix raid5 hang issue, by Junxiao Bi;
 3. Add Yu Kuai as Reviewer of the md subsystem."

* tag 'md-next-20231208' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: synchronize flush io with array reconfiguration
  MAINTAINERS: SOFTWARE RAID: Add Yu Kuai as Reviewer
  md/md-multipath: remove rcu protection to access rdev from conf
  md/raid5: remove rcu protection to access rdev from conf
  md/raid1: remove rcu protection to access rdev from conf
  md/raid10: remove rcu protection to access rdev from conf
  md: remove flag RemoveSynchronized
  Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"
  md: bypass block throttle for superblock update

The special casing was originally added in pre-git history; reproducing
the commit log here:

> commit a318a92567d77
> Author: Andrew Morton <akpm@osdl.org>
> Date:   Sun Sep 21 01:42:22 2003 -0700
>
>     [PATCH] Speed up direct-io hugetlbpage handling
>
>     This patch short-circuits all the direct-io page dirtying logic for
>     higher-order pages.  Without this, we pointlessly bounce BIOs up to
>     keventd all the time.

In the last twenty years, compound pages have become used for more than
just hugetlb.  Rewrite these functions to operate on folios instead
of pages and remove the special case for hugetlbfs; I don't think
it's needed any more (and if it is, we can put it back in as a call
to folio_test_hugetlb()).

This was found by inspection; as far as I can tell, this bug can lead
to pages used as the destination of a direct I/O read not being marked
as dirty.  If those pages are then reclaimed by the MM without being
dirtied for some other reason, they won't be written out.  Then when
they're faulted back in, they will not contain the data they should.
It'll take a pretty unusual setup to produce this problem with several
races all going the wrong way.

This problem predates the folio work; it could for example have been
triggered by mmaping a THP in tmpfs and using that as the target of an
O_DIRECT read.

Fixes: 800d8c63 ("shmem: add huge pages support")
Cc:  <stable@vger.kernel.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Write-back throttling (WBT) enables QUEUE_FLAG_STATS on the request
queue. But WBT does not make sense for passthrough io, so skip
QUEUE_FLAG_STATS processing.

Also skip rq_qos_issue/done for passthrough io.

Overall, the change gives ~11% hike in peak performance.
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20231123190331.7934-1-kundan.kumar@samsung.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

No more users of this field.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231130215309.2923568-5-kbusch@meta.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

No more users of this flag.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231130215309.2923568-4-kbusch@meta.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Map user metadata buffers directly. Now that the bio tracks the
metadata, nvme doesn't need special metadata handling and tracking with
callbacks and additional fields in the pdu.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231130215309.2923568-3-kbusch@meta.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Passthrough commands that utilize metadata currently need to bounce the
user space buffer through the kernel. Add support for mapping user space
directly so that we can avoid this costly overhead. This is similar to
how the normal bio data payload utilizes user addresses with
bio_map_user_iov().

If the user address can't directly be used for reason, like too many
segments or address unalignement, fallback to a copy of the user vec
while keeping the user address pinned for the IO duration so that it
can safely be copied on completion in any process context.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231130215309.2923568-2-kbusch@meta.com
[axboe: fold in fix from Kanchan Joshi]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Currently rcu is used to protect iterating rdev from submit_flushes():

submit_flushes			remove_and_add_spares
				synchronize_rcu
				pers->hot_remove_disk()
 rcu_read_lock()
 rdev_for_each_rcu
  if (rdev->raid_disk >= 0)
				rdev->radi_disk = -1;
   atomic_inc(&rdev->nr_pending)
   rcu_read_unlock()
   bi = bio_alloc_bioset()
   bi->bi_end_io = md_end_flush
   bi->private = rdev
   submit_bio
   // issue io for removed rdev

Fix this problem by grabbing 'acive_io' before iterating rdev, make sure
that remove_and_add_spares() won't concurrent with submit_flushes().

Fixes: a2826aa9 ("md: support barrier requests on all personalities.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231129020234.1586910-1-yukuai1@huaweicloud.com

Add Yu Kuai as reviewer for md/raid subsystem.
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20231128035807.3191738-1-song@kernel.org

From Yu Kuai:

md: remove rcu protection to access rdev from conf

The lifetime of rdev:

1. md_import_device() generate a rdev based on underlying disk;

   mddev_lock()
   rdev = kzalloc();
   rdev->bdev = blkdev_get_by_dev();
   mddev_unlock()

2. bind_rdev_to_array() add this rdev to mddev->disks;

   mddev_lock()
   kobject_add(&rdev->kobj, &mddev->kobj, ...);
   list_add_rcu(&rdev->same_set, &mddev->disks);
   mddev_unlock()

3. remove_and_add_spares() add this rdev to conf;

   mddev_lock()
   rdev_addable();
   pers->hot_add_disk();
   rcu_assign_pointer(conf->rdev, rdev);
   mddev_unlock()

4. Use this array with rdev;

5. remove_and_add_spares() remove rdev from conf;

   // triggered by sysfs/ioctl
   mddev_lock()
   rdev_removeable();
   pers->hot_remove_disk();
    rcu_assign_pointer(conf->rdev, NULL);
    synchronize_rcu();
   mddev_unlock()

   // triggered by daemon
   mddev_lock()
   rdev_removeable();
   synchronize_rcu(); -> this can't protect accessing rdev from conf
   pers->hot_remove_disk();
    rcu_assign_pointer(conf->rdev, NULL);
   mddev_unlock()

6. md_kick_rdev_from_array() remove rdev from mddev->disks;

   mddev_lock()
   list_del_rcu(&rdev->same_set);
   synchronize_rcu();
   list_add(&rdev->same_set, &mddev->deleting)
   mddev_unlock()
    export_rdev

There are two separate rcu protection for rdev, and this pathset remove
the protection of conf(step 3 and 5), because it's safe to access rdev
from conf in following cases:

 - If 'reconfig_mutex' is held, because rdev can't be added or rmoved to
 conf;
 - If there is normal IO inflight, because mddev_suspend() will wait for
 IO to be done and prevent rdev to be added or removed to conf;
 - If sync thread is running, because remove_and_add_spares() can only be
 called from daemon thread when sync thread is done, and
 'MD_RECOVERY_RUNNING' is also checked for ioctl/sysfs;
 - if any spinlock or rcu_read_lock() is held, because synchronize_rcu()
 from step 6 prevent rdev to be freed until spinlock is released or
 rcu_read_unlock();

Because it's safe to accees rdev from conf:
 - If any spinlock is held, because synchronize_rcu() from
   md_kick_rdev_from_array() will prevent 'rdev' to be freed until
   spinlock is released;
 - If there is normal IO inflight, because mddev_suspend() will prevent
   rdev to be added or removed from array;

And these will cover all the scenarios in md-multipath.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231125081604.3939938-6-yukuai1@huaweicloud.com

Because it's safe to accees rdev from conf:
 - If any spinlock is held, because synchronize_rcu() from
   md_kick_rdev_from_array() will prevent 'rdev' to be freed until
   spinlock is released;
 - If 'reconfig_lock' is held, because rdev can't be added or removed from
   array;
 - If there is normal IO inflight, because mddev_suspend() will prevent
   rdev to be added or removed from array;
 - If there is sync IO inflight, because 'MD_RECOVERY_RUNNING' is
   checked in remove_and_add_spares().

And these will cover all the scenarios in raid456.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231125081604.3939938-5-yukuai1@huaweicloud.com

Because it's safe to accees rdev from conf:
 - If any spinlock is held, because synchronize_rcu() from
   md_kick_rdev_from_array() will prevent 'rdev' to be freed until
   spinlock is released;
 - If 'reconfig_lock' is held, because rdev can't be added or removed from
   array;
 - If there is normal IO inflight, because mddev_suspend() will prevent
   rdev to be added or removed from array;
 - If there is sync IO inflight, because 'MD_RECOVERY_RUNNING' is
   checked in remove_and_add_spares().

And these will cover all the scenarios in raid1.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231125081604.3939938-4-yukuai1@huaweicloud.com

Because it's safe to accees rdev from conf:
 - If any spinlock is held, because synchronize_rcu() from
   md_kick_rdev_from_array() will prevent 'rdev' to be freed until
   spinlock is released;
 - If 'reconfig_lock' is held, because rdev can't be added or removed from
   array;
 - If there is normal IO inflight, because mddev_suspend() will prevent
   rdev to be added or removed from array;
 - If there is sync IO inflight, because 'MD_RECOVERY_RUNNING' is
   checked in remove_and_add_spares().

And these will cover all the scenarios in raid10.

This patch also cleanup the code to handle the case that replacement
replace rdev while IO is still inflight.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231125081604.3939938-3-yukuai1@huaweicloud.com

rcu is not used correctly here, because synchronize_rcu() is called
before replacing old value, for example:

remove_and_add_spares   // other path
 synchronize_rcu
 // called before replacing old value
 set_bit(RemoveSynchronized)
                        rcu_read_lock()
                        rdev = conf->mirros[].rdev
 pers->hot_remove_disk
  conf->mirros[].rdev = NULL;
  if (!test_bit(RemoveSynchronized))
   synchronize_rcu
   /*
    * won't be called, and won't wait
    * for concurrent readers to be done.
    */
                        // access rdev after remove_and_add_spares()
                        rcu_read_unlock()

Fortunately, there is a separate rcu protection to prevent such rdev
to be freed:

md_kick_rdev_from_array		//other path
				rcu_read_lock()
				rdev = conf->mirros[].rdev
list_del_rcu(&rdev->same_set)

				rcu_read_unlock()
				/*
				 * rdev can be removed from conf, but
				 * rdev won't be freed.
				 */
synchronize_rcu()
free rdev

Hence remove this useless flag and prepare to remove rcu protection to
access rdev from 'conf'.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231125081604.3939938-2-yukuai1@huaweicloud.com

This reverts commit 5e2cf333.

That commit introduced the following race and can cause system hung.

 md_write_start:             raid5d:
 // mddev->in_sync == 1
 set "MD_SB_CHANGE_PENDING"
                            // running before md_write_start wakeup it
                             waiting "MD_SB_CHANGE_PENDING" cleared
                             >>>>>>>>> hung
 wakeup mddev->thread
 ...
 waiting "MD_SB_CHANGE_PENDING" cleared
 >>>> hung, raid5d should clear this flag
 but get hung by same flag.

The issue reverted commit fixing is fixed by last patch in a new way.

Fixes: 5e2cf333 ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231108182216.73611-2-junxiao.bi@oracle.com

commit 5e2cf333 ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d")
introduced a hung bug and will be reverted in next patch, since the issue
that commit is fixing is due to md superblock write is throttled by wbt,
to fix it, we can have superblock write bypass block layer throttle.

Fixes: 5e2cf333 ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d")
Cc: stable@vger.kernel.org # v5.19+
Suggested-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231108182216.73611-1-junxiao.bi@oracle.com

Allow using a few symbols with IS_ENABLED instead of #idef by moving
the declarations out of #idef CONFIG_BLK_DEV_ZONED, and move
bdev_nr_zones into the remaining  #idef CONFIG_BLK_DEV_ZONED, #else
block below.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231127072002.1332685-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

While printing error, replace %ld by %pe. %pe prints a string
whereas %ld would print an error code.
Signed-off-by: Supriti Singh <supriti.singh@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://lore.kernel.org/r/20231124213422.113449-3-haris.iqbal@ionos.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Remove REQ_OP_WRITE_SAME in favour of REQ_OP_WRITE_ZEROES.
Signed-off-by: Santosh Pradhan <santosh.pradhan@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://lore.kernel.org/r/20231124213422.113449-2-haris.iqbal@ionos.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull tracing fixes from Steven Rostedt::
 "Eventfs fixes:

   - With the usage of simple_recursive_remove() recommended by Al Viro,
     the code should not be calling "d_invalidate()" itself. Doing so is
     causing crashes. The code was calling d_invalidate() on the race of
     trying to look up a file while the parent was being deleted. This
     was detected, and the added dentry was having d_invalidate() called
     on it, but the deletion of the directory was also calling
     d_invalidate() on that same dentry.

   - A fix to not free the eventfs_inode (ei) until the last dput() was
     called on its ei->dentry made the ei->dentry exist even after it
     was marked for free by setting the ei->is_freed. But code elsewhere
     still was checking if ei->dentry was NULL if ei->is_freed is set
     and would trigger WARN_ON if that was the case. That's no longer
     true and there should not be any warnings when it is true.

   - Use GFP_NOFS for allocations done under eventfs_mutex. The
     eventfs_mutex can be taken on file system reclaim, make sure that
     allocations done under that mutex do not trigger file system
     reclaim.

   - Clean up code by moving the taking of inode_lock out of the helper
     functions and into where they are needed, and not use the parameter
     to know to take it or not. It must always be held but some callers
     of the helper function have it taken when they were called.

   - Warn if the inode_lock is not held in the helper functions.

   - Warn if eventfs_start_creating() is called without a parent. As
     eventfs is underneath tracefs, all files created will have a parent
     (the top one will have a tracefs parent).

  Tracing update:

   - Add Mathieu Desnoyers as an official reviewer of the tracing subsystem"

* tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer
  eventfs: Make sure that parent->d_inode is locked in creating files/dirs
  eventfs: Do not allow NULL parent to eventfs_start_creating()
  eventfs: Move taking of inode_lock into dcache_dir_open_wrapper()
  eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held
  eventfs: Do not invalidate dentry in create_file/dir_dentry()
  eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL

Pull parisc architecture fixes from Helge Deller:
 "This patchset fixes and enforces correct section alignments for the
  ex_table, altinstructions, parisc_unwind, jump_table and bug_table
  which are created by inline assembly.

  Due to not being correctly aligned at link & load time they can
  trigger unnecessarily the kernel unaligned exception handler at
  runtime. While at it, I switched the bug table to use relative
  addresses which reduces the size of the table by half on 64-bit.

  We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs
  from HP-UX, which now trigger build-issues with glibc. We can simply
  remove them.

  Most of the patches are tagged for stable kernel series.

  Summary:

   - Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc
     build issues

   - Fix section alignments for ex_table, altinstructions, parisc unwind
     table, jump_table and bug_table

   - Reduce size of bug_table on 64-bit kernel by using relative
     pointers"

* tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Reduce size of the bug_table on 64-bit kernel by half
  parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes
  parisc: Use natural CPU alignment for bug_table
  parisc: Ensure 32-bit alignment on parisc unwind section
  parisc: Mark lock_aligned variables 16-byte aligned on SMP
  parisc: Mark jump_table naturally aligned
  parisc: Mark altinstructions read-only and 32-bit aligned
  parisc: Mark ex_table entries 32-bit aligned in uaccess.h
  parisc: Mark ex_table entries 32-bit aligned in assembly.h

Pull x86 microcode fixes from Ingo Molnar:
 "Fix/enhance x86 microcode version reporting: fix the bootup log spam,
  and remove the driver version announcement to avoid version confusion
  when distros backport fixes"

* tag 'x86-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Rework early revisions reporting
  x86/microcode: Remove the driver announcement and version

Pull x86 perf event fix from Ingo Molnar:
 "Fix a bug in the Intel hybrid CPUs hardware-capabilities enumeration
  code resulting in non-working events on those platforms"

* tag 'perf-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Correct incorrect 'or' operation for PMU capabilities

Pull locking fix from Ingo Molnar:
 "Fix lockdep block chain corruption resulting in KASAN warnings"

* tag 'locking-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Fix block chain corruption

Pull smb client fixes from Steve French:

 - use after free fix in releasing multichannel interfaces

 - fixes for special file types (report char, block, FIFOs properly when
   created e.g. by NFS to Windows)

 - fixes for reporting various special file types and symlinks properly
   when using SMB1

* tag '6.7-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: introduce cifs_sfu_make_node()
  smb: client: set correct file type from NFS reparse points
  smb: client: introduce ->parse_reparse_point()
  smb: client: implement ->query_reparse_point() for SMB1
  cifs: fix use after free for iface while disabling secondary channels

Pull USB / PHY / Thunderbolt fixes from Greg KH:
 "Here are a number of reverts, fixes, and new device ids for 6.7-rc3
  for the USB, PHY, and Thunderbolt driver subsystems. Include in here
  are:

   - reverts of some PHY drivers that went into 6.7-rc1 that shouldn't
     have been merged yet, the author is reworking them based on review
     comments as they were using older apis that shouldn't be used
     anymore for newer drivers

   - small thunderbolt driver fixes for reported issues

   - USB driver fixes for a variety of small issues in dwc3, typec,
     xhci, and other smaller drivers.

   - new device ids for usb-serial and onboard_usb_hub drivers.

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  USB: serial: option: add Luat Air72*U series products
  USB: dwc3: qcom: fix ACPI platform device leak
  USB: dwc3: qcom: fix software node leak on probe errors
  USB: dwc3: qcom: fix resource leaks on probe deferral
  USB: dwc3: qcom: simplify wakeup interrupt setup
  USB: dwc3: qcom: fix wakeup after probe deferral
  dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types
  usb: misc: onboard-hub: add support for Microchip USB5744
  dt-bindings: usb: microchip,usb5744: Add second supply
  usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
  USB: serial: option: add Fibocom L7xx modules
  USB: xhci-plat: fix legacy PHY double init
  usb: typec: tipd: Supply also I2C driver data
  usb: xhci-mtk: fix in-ep's start-split check failure
  usb: dwc3: set the dma max_seg_size
  usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
  usb: dwc3: add missing of_node_put and platform_device_put
  USB: dwc2: write HCINT with INTMASK applied
  usb: misc: ljca: Drop _ADR support to get ljca children devices
  usb: cdnsp: Fix deadlock issue during using NCM gadget
  ...

Pull xfs fix from Chandan Babu:

 - Validate quota records recovered from the log before writing them to
   the disk.

* tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: dquot recovery does not validate the recovered dquot
  xfs: clean up dqblk extraction

Pull arm64 fixes from Catalin Marinas:

 - Fix "rodata=on" not disabling "rodata=full" on arm64

 - Add arm64 make dependency between vmlinuz.efi and Image, leading to
   occasional build failures previously (with parallel building)

 - Add newline to the output formatting of the za-fork kselftest

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: add dependency between vmlinuz.efi and Image
  kselftest/arm64: Fix output formatting for za-fork
  arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y

Pull xen fixes from Juergen Gross:

 - A small cleanup patch for the Xen privcmd driver

 - A fix for the swiotlb-xen driver which was missing the advertising of
   the maximum mapping length

 - A fix for Xen on Arm for a longstanding bug, which happened to occur
   only recently: a structure in percpu memory crossed a page boundary,
   which was rejected by the hypervisor

* tag 'for-linus-6.7a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm/xen: fix xen_vcpu_info allocation alignment
  xen: privcmd: Replace zero-length array with flex-array member and use __counted_by
  swiotlb-xen: provide the "max_mapping_size" method

Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative
offsets to the bug address and the source file name instead of 64-bit
absolute addresses. This effectively reduces the size of the
bug_table[] array by half on 64-bit kernels.
Signed-off-by: Helge Deller <deller@gmx.de>

Those return codes are only defined for the parisc architecture and
are leftovers from when we wanted to be HP-UX compatible.

They are not returned by any Linux kernel syscall but do trigger
problems with the glibc strerrorname_np() and strerror() functions as
reported in glibc issue #31080.

There is no need to keep them, so simply remove them.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Bruno Haible <bruno@clisp.org>
Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080
Cc: stable@vger.kernel.org

Make sure that the __bug_table section gets 32- or 64-bit aligned,
depending if a 32- or 64-bit kernel is being built.
Mark it non-writeable and use .blockz instead of the .org assembler
directive to pad the struct.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+

Make sure the .PARISC.unwind section will be 32-bit aligned.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+

On parisc we need 16-byte alignment for variables which are used for
locking. Mark the __lock_aligned attribute acordingly so that the
.data..lock_aligned section will get that alignment in the generated
object files.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+