- 13 Sep, 2014 40 commits
-
-
Patrick Riphagen authored
commit 9273b8a2 upstream. The converters are used in specific products. It can be useful to know which they are exactly. Signed-off-by:
Patrick Riphagen <patrick.riphagen@xsens.com> Signed-off-by:
Frans Klaver <frans.klaver@xsens.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Paul Moore authored
commit 41c3bd20 upstream. The NetLabel category (catmap) functions have a problem in that they assume categories will be set in an increasing manner, e.g. the next category set will always be larger than the last. Unfortunately, this is not a valid assumption and could result in problems when attempting to set categories less than the startbit in the lowest catmap node. In some cases kernel panics and other nasties can result. This patch corrects the problem by checking for this and allocating a new catmap node instance and placing it at the front of the list. Reported-by:
Christian Evans <frodox@zoho.com> Signed-off-by:
Paul Moore <pmoore@redhat.com> Tested-by:
Casey Schaufler <casey@schaufler-ca.com> [bwh: Backported to 3.2: adjust filename for SMACK] Signed-off-by:
-
Dan Carpenter authored
commit 64b5fad5 upstream. This function takes a GFP flags as a parameter, but they are never used. We don't take a lock in this function so there is no reason to prefer GFP_ATOMIC over the caller's GFP flags. There is only one caller, cipso_v4_map_cat_rng_ntoh(), and it passes GFP_ATOMIC as the GFP flags so this doesn't change how the code works. It's just a cleanup. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jeremy Vial authored
commit 9b5f7428 upstream. According to the comment “restore_es3: applies to 34xx >= ES3.0" in "arch/arm/mach-omap2/sleep34xx.S”, omap3_restore_es3 should be used if the revision of an OMAP34xx is ES3.1.2. Signed-off-by:
Jeremy Vial <jvial@adeneo-embedded.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Eric W. Biederman authored
commit ffbc6f0e upstream. Since March 2009 the kernel has treated the state that if no MS_..ATIME flags are passed then the kernel defaults to relatime. Defaulting to relatime instead of the existing atime state during a remount is silly, and causes problems in practice for people who don't specify any MS_...ATIME flags and to get the default filesystem atime setting. Those users may encounter a permission error because the default atime setting does not work. A default that does not work and causes permission problems is ridiculous, so preserve the existing value to have a default atime setting that is always guaranteed to work. Using the default atime setting in this way is particularly interesting for applications built to run in restricted userspace environments without /proc mounted, as the existing atime mount options of a filesystem can not be read from /proc/mounts. In practice this fixes user space that uses the default atime setting on remount that are broken by the permission checks keeping less privileged users from changing more privileged users atime settings. Acked-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> [bwh: Backported to 3.2: add definition of MNT_ATIME_MASK, as we don't need the fix that introduced that definition upstream] Signed-off-by:
-
Milan Broz authored
commit 4c63f83c upstream. Th AF_ALG socket was missing a security label (e.g. SELinux) which means that socket was in "unlabeled" state. This was recently demonstrated in the cryptsetup package (cryptsetup v1.6.5 and later.) See https://bugzilla.redhat.com/show_bug.cgi?id=1115120 This patch clones the sock's label from the parent sock and resolves the issue (similar to AF_BLUETOOTH protocol family). Signed-off-by:
Milan Broz <gmazyland@gmail.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jeffrey Deans authored
commit ffc8415a upstream. A GIC interrupt which is declared as having a GIC_MAP_TO_NMI_MSK mapping causes the cpu parameter to gic_setup_intr() to be increased to 32, causing memory corruption when pcpu_masks[] is written to again later in the function. Signed-off-by:
Jeffrey Deans <jeffrey.deans@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7375/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Axel Lin authored
commit cf44819c upstream. Ensure mutex lock protects the read-modify-write period to prevent possible race condition bug. In additional, update data->valid should also be protected by the mutex lock. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Sachin Kamat authored
commit 3499e5b2 upstream. Propagate return value obtained from i2c_smbus_read_byte_data() instead of hardcoding. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Cc: T. Mertelj <tomaz.mertelj@guest.arnes.si> Signed-off-by:
-
Guenter Roeck authored
commit 1074d683 upstream. On platforms with sizeof(int) < sizeof(long), writing a temperature limit larger than MAXINT will result in unpredictable limit values written to the chip. Avoid auto-conversion from long to int to fix the problem. Cc: Axel Lin <axel.lin@ingics.com> Reviewed-by:
-
Guenter Roeck authored
commit 3248c3b7 upstream. Temperature limit register writes did not account for negative numbers. As a result, writing -127000 resulted in -126000 written into the temperature limit register. This problem affected temp[1-3]_min, temp[1-3]_max, temp[1-3]_auto_temp_crit, and temp[1-3]_auto_temp_min. When writing pwm[1-3]_freq, a long variable was auto-converted into an int without range check. Wiring values larger than MAXINT resulted in unexpected register values. When writing temp[1-3]_auto_temp_max, an unsigned long variable was auto-converted into an int without range check. Writing values larger than MAXINT resulted in unexpected register values. vrm is an u8, so the written value needs to be limited to [0, 255]. Cc: Axel Lin <axel.lin@ingics.com> Reviewed-by:
-
Theodore Ts'o authored
commit 86f0afd4 upstream. If there is a failure while allocating the preallocation structure, a number of blocks can end up getting marked in the in-memory buddy bitmap, and then not getting released. This can result in the following corruption getting reported by the kernel: EXT4-fs error (device sda3): ext4_mb_generate_buddy:758: group 1126, 12793 clusters in bitmap, 12729 in gd In that case, we need to release the blocks using mb_free_blocks(). Tested: fs smoke test; also demonstrated that with injected errors, the file system is no longer getting corrupted Google-Bug-Id: 16657874 Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Zheng Liu authored
commit 400db9d3 upstream. remove 'len' variable in ext4_discard_allocated_blocks() because it is useless. Signed-off-by:
Zheng Liu <wenqing.lz@taobao.com> Signed-off-by:
-
NeilBrown authored
commit 2446dba0 upstream. Currently we don't abort recovery on a write error if the write error to the recovering device was triggerd by normal IO (as opposed to recovery IO). This means that for one bitmap region, the recovery might write to the recovering device for a few sectors, then not bother for subsequent sectors (as it never writes to failed devices). In this case the bitmap bit will be cleared, but it really shouldn't. The result is that if the recovering device fails and is then re-added (after fixing whatever hardware problem triggerred the failure), the second recovery won't redo the region it was in the middle of, so some of the device will not be recovered properly. If we abort the recovery, the region being processes will be cancelled (bit not cleared) and the whole region will be retried. As the bug can result in data corruption the patch is suitable for -stable. For kernels prior to 3.11 there is a conflict in raid10.c which will require care. Original-from: jiao hui <jiaohui@bwstor.com.cn> Reported-and-tested-by:
jiao hui <jiaohui@bwstor.com.cn> Signed-off-by:
NeilBrown <neilb@suse.de> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
David Rientjes authored
commit b104a35d upstream. The page allocator relies on __GFP_WAIT to determine if ALLOC_CPUSET should be set in allocflags. ALLOC_CPUSET controls if a page allocation should be restricted only to the set of allowed cpuset mems. Transparent hugepages clears __GFP_WAIT when defrag is disabled to prevent the fault path from using memory compaction or direct reclaim. Thus, it is unfairly able to allocate outside of its cpuset mems restriction as a side-effect. This patch ensures that ALLOC_CPUSET is only cleared when the gfp mask is truly GFP_ATOMIC by verifying it is also not a thp allocation. Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Alex Thorlton <athorlton@sgi.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Paul Burton authored
commit b1442d39 upstream. If one or more matching FCSR cause & enable bits are set in saved thread context then when that context is restored the kernel will take an FP exception. This is of course undesirable and considered an oops, leading to the kernel writing a backtrace to the console and potentially rebooting depending upon the configuration. Thus the kernel avoids this situation by clearing the cause bits of the FCSR register when handling FP exceptions and after emulating FP instructions. However the kernel does not prevent userland from setting arbitrary FCSR cause & enable bits via ptrace, using either the PTRACE_POKEUSR or PTRACE_SETFPREGS requests. This means userland can trivially cause the kernel to oops on any system with an FPU. Prevent this from happening by clearing the cause bits when writing to the saved FCSR context via ptrace. This problem appears to exist at least back to the beginning of the git era in the PTRACE_POKEUSR case. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paul Burton <paul.burton@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/7438/Signed-off-by:
-
Huacai Chen authored
commit 8393c524 upstream. In commit 2c8c53e2 (MIPS: Optimize TLB handlers for Octeon CPUs) build_r4000_tlb_refill_handler() is modified. But it doesn't compatible with the original code in HUGETLB case. Because there is a copy & paste error and one line of code is missing. It is very easy to produce a bug with LTP's hugemmap05 test. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Binbin Zhou <zhoubb@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7496/Signed-off-by:
-
Axel Lin authored
commit 56de1377 upstream. Current code uses channel as array index, so the valid channel value is 0 .. ADS1015_CHANNELS - 1. Signed-off-by:
-
Jason Gunthorpe authored
commit 8e54caf4 upstream. Some Atmel TPMs provide completely wrong timeouts from their TPM_CAP_PROP_TIS_TIMEOUT query. This patch detects that and returns new correct values via a DID/VID table in the TIS driver. Tested on ARM using an AT97SC3204T FW version 37.16 [PHuewe: without this fix these 'broken' Atmel TPMs won't function on older kernels] Signed-off-by:
"Berg, Christopher" <Christopher.Berg@atmel.com> Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> [bwh: Backported to 3.2: - Adjust filename, context - s/chip->ops->/chip->vendor./] Signed-off-by:
-
Andrey Ryabinin authored
commit 40eea803 upstream. Sasha's report: > While fuzzing with trinity inside a KVM tools guest running the latest -next > kernel with the KASAN patchset, I've stumbled on the following spew: > > [ 4448.949424] ================================================================== > [ 4448.951737] AddressSanitizer: user-memory-access on address 0 > [ 4448.952988] Read of size 2 by thread T19638: > [ 4448.954510] CPU: 28 PID: 19638 Comm: trinity-c76 Not tainted 3.16.0-rc4-next-20140711-sasha-00046-g07d3099-dirty #813 > [ 4448.956823] ffff88046d86ca40 0000000000000000 ffff880082f37e78 ffff880082f37a40 > [ 4448.958233] ffffffffb6e47068 ffff880082f37a68 ffff880082f37a58 ffffffffb242708d > [ 4448.959552] 0000000000000000 ffff880082f37a88 ffffffffb24255b1 0000000000000000 > [ 4448.961266] Call Trace: > [ 4448.963158] dump_stack (lib/dump_stack.c:52) > [ 4448.964244] kasan_report_user_access (mm/kasan/report.c:184) > [ 4448.965507] __asan_load2 (mm/kasan/kasan.c:352) > [ 4448.966482] ? netlink_sendmsg (net/netlink/af_netlink.c:2339) > [ 4448.967541] netlink_sendmsg (net/netlink/af_netlink.c:2339) > [ 4448.968537] ? get_parent_ip (kernel/sched/core.c:2555) > [ 4448.970103] sock_sendmsg (net/socket.c:654) > [ 4448.971584] ? might_fault (mm/memory.c:3741) > [ 4448.972526] ? might_fault (./arch/x86/include/asm/current.h:14 mm/memory.c:3740) > [ 4448.973596] ? verify_iovec (net/core/iovec.c:64) > [ 4448.974522] ___sys_sendmsg (net/socket.c:2096) > [ 4448.975797] ? put_lock_stats.isra.13 (./arch/x86/include/asm/preempt.h:98 kernel/locking/lockdep.c:254) > [ 4448.977030] ? lock_release_holdtime (kernel/locking/lockdep.c:273) > [ 4448.978197] ? lock_release_non_nested (kernel/locking/lockdep.c:3434 (discriminator 1)) > [ 4448.979346] ? check_chain_key (kernel/locking/lockdep.c:2188) > [ 4448.980535] __sys_sendmmsg (net/socket.c:2181) > [ 4448.981592] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2600) > [ 4448.982773] ? trace_hardirqs_on (kernel/locking/lockdep.c:2607) > [ 4448.984458] ? syscall_trace_enter (arch/x86/kernel/ptrace.c:1500 (discriminator 2)) > [ 4448.985621] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2600) > [ 4448.986754] SyS_sendmmsg (net/socket.c:2201) > [ 4448.987708] tracesys (arch/x86/kernel/entry_64.S:542) > [ 4448.988929] ================================================================== This reports means that we've come to netlink_sendmsg() with msg->msg_name == NULL and msg->msg_namelen > 0. After this report there was no usual "Unable to handle kernel NULL pointer dereference" and this gave me a clue that address 0 is mapped and contains valid socket address structure in it. This bug was introduced in f3d33426 (net: rework recvmsg handler msg_name and msg_namelen logic). Commit message states that: "Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address." But in fact this affects sendto when address 0 is mapped and contains socket address structure in it. In such case copy-in address will succeed, verify_iovec() function will successfully exit with msg->msg_namelen > 0 and msg->msg_name == NULL. This patch fixes it by setting msg_namelen to 0 if msg_name == NULL. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Eric Dumazet <edumazet@google.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Andrey Ryabinin <a.ryabinin@samsung.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Alex Williamson authored
commit c875d2c1 upstream. The user of the IOMMU API domain expects to have full control of the IOVA space for the domain. RMRRs are fundamentally incompatible with that idea. We can neither map the RMRR into the IOMMU API domain, nor can we guarantee that the device won't continue DMA with the area described by the RMRR as part of the new domain. Therefore we must prevent such devices from being used by the IOMMU API. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
Joerg Roedel <jroedel@suse.de> [bwh: Backported to 3.2: driver only operates on PCI devices] Signed-off-by:
-
Linus Torvalds authored
commit 2062afb4 upstream. Michel Dänzer and a couple of other people reported inexplicable random oopses in the scheduler, and the cause turns out to be gcc mis-compiling the load_balance() function when debugging is enabled. The gcc bug apparently goes back to gcc-4.5, but slight optimization changes means that it now showed up as a problem in 4.9.0 and 4.9.1. The instruction scheduling problem causes gcc to schedule a spill operation to before the stack frame has been created, which in turn can corrupt the spilled value if an interrupt comes in. There may be other effects of this bug too, but that's the code generation problem seen in Michel's case. This is fixed in current gcc HEAD, but the workaround as suggested by Markus Trippelsdorf is pretty simple: use -fno-var-tracking-assignments when compiling the kernel, which disables the gcc code that causes the problem. This can result in slightly worse debug information for variable accesses, but that is infinitely preferable to actual code generation problems. Doing this unconditionally (not just for CONFIG_DEBUG_INFO) also allows non-debug builds to verify that the debug build would be identical: we can do export GCC_COMPARE_DEBUG=1 to make gcc internally verify that the result of the build is independent of the "-g" flag (it will make the compiler build everything twice, toggling the debug flag, and compare the results). Without the "-fno-var-tracking-assignments" option, the build would fail (even with 4.8.3 that didn't show the actual stack frame bug) with a gcc compare failure. See also gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801Reported-by:
Michel Dänzer <michel@daenzer.net> Suggested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Jakub Jelinek <jakub@redhat.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 56b26e69 upstream. On Azure, we have seen instances of unbounded I/O latencies. To deal with this issue, implement handler that can reset the timeout. Note that the host gaurantees that it will respond to each command that has been issued. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> [hch: added a better comment explaining the issue] Signed-off-by:
Christoph Hellwig <hch@lst.de> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by:
-
Stephen M. Cameron authored
commit 0758f4f7 upstream. When copy_from_user fails, return -EFAULT, not -ENOMEM Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Reported-by:
Robert Elliott <elliott@hp.com> Reviewed-by:
Joe Handzik <joseph.t.handzik@hp.com> Reviewed-by:
Scott Teel <scott.teel@hp.com> Reviewed by: Mike MIller <michael.miller@canonical.com> Signed-off-by:
-
Ben Hutchings authored
commit 03a6c3ff upstream. bfa_swap_words() shifts its argument (assumed to be 64-bit) by 32 bits each way. In two places the argument type is dma_addr_t, which may be 32-bit, in which case the effect of the bit shift is undefined: drivers/scsi/bfa/bfa_fcpim.c: In function 'bfa_ioim_send_ioreq': drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: left shift count >= width of type [enabled by default] addr = bfa_sgaddr_le(sg_dma_address(sg)); ^ drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: right shift count >= width of type [enabled by default] drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: left shift count >= width of type [enabled by default] addr = bfa_sgaddr_le(sg_dma_address(sg)); ^ drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: right shift count >= width of type [enabled by default] Avoid this by adding casts to u64 in bfa_swap_words(). Compile-tested only. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
Anil Gurumurthy <anil.gurumurthy@qlogic.com> Fixes: f16a1750 ('[SCSI] bfa: remove all OS wrappers') Signed-off-by:
-
Malcolm Priestley authored
commit 4aa0abed upstream. byReAssocCount is incremented every second resulting in disassociated message being send every 10 seconds whether connection or not. byReAssocCount should only advance while eCommandState is in WLAN_ASSOCIATE_WAIT Change existing scope to if condition. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
commit 6cff1f6a upstream. WARNING: CPU: 0 PID: 929 at /home/apw/COD/linux/kernel/irq/handle.c:147 handle_irq_event_percpu+0x1d1/0x1e0() irq 17 handler device_intr+0x0/0xa80 [vt6655_stage] enabled interrupts Using spin_lock_irqsave appears to fix this. Signed-off-by:
-
Guenter Roeck authored
commit 043572d5 upstream. Temperature limit clamps are applied after converting the temperature from milli-degrees C to degrees C, so either the clamp limit needs to be specified in degrees C, not milli-degrees C, or clamping must happen before converting to degrees C. Use the latter method to avoid overflows. vrm is an u8, so the written value needs to be limited to [0, 255]. Cc: Axel Lin <axel.lin@ingics.com> Signed-off-by:
Jean Delvare <jdelvare@suse.de> [bwh: Backported to 3.2: - Driver is not using clamp_val(); keep using SENSORS_LIMIT() for consistency - Driver is not using kstrtoul(); make the minimum change to set_vrm() so we can validate the value before assigning] Signed-off-by:
-
Christian König authored
commit e8c214d2 upstream. We must mask out the overflow bit as well, otherwise the wptr will never match the rptr again and the interrupt handler will loop forever. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> [bwh: Backported to 3.2: drop changes for unsupported GPUs] Signed-off-by:
-
Pratyush Anand authored
commit a40178b2 upstream. Problem Summary: Problem has been observed generally with PM states where VBUS goes off during suspend. There are some SS USB devices which take longer time for link training compared to many others. Such devices fail to reconnect with same old address which was associated with it before suspend. When system resumes, at some point of time (dpm_run_callback-> usb_dev_resume->usb_resume->usb_resume_both->usb_resume_device-> usb_port_resume) SW reads hub status. If device is present, then it finishes port resume and re-enumerates device with same address. If device is not present then, SW thinks that device was removed during suspend and therefore does logical disconnection and removes all the resource allocated for this device. Now, if I put sufficient delay just before root hub status read in usb_resume_device then, SW sees always that device is present. In normal course(without any delay) SW sees that no device is present and then SW removes all resource associated with the device at this port. In the latter case, after sometime, device says that hey I am here, now host enumerates it, but with new address. Problem had been reproduced when I connect verbatim USB3.0 hard disc with my STiH407 XHCI host running with 3.10 kernel. I see that similar problem has been reported here. https://bugzilla.kernel.org/show_bug.cgi?id=53211 Reading above it seems that bug was not in 3.6.6 and was present in 3.8 and again it was not present for some in 3.12.6, while it was present for few others. I tested with 3.13-FC19 running at i686 desktop, problem was still there. However, I was failed to reproduce it with 3.16-RC4 running at same i686 machine. I would say it is just a random observation. Problem for few devices is always there, as I am unable to find a proper fix for the issue. So, now question is what should be the amount of delay so that host is always able to recognize suspended device after resume. XHCI specs 4.19.4 says that when Link training is successful, port sets CSC bit to 1. So if SW reads port status before successful link training, then it will not find device to be present. USB Analyzer log with such buggy devices show that in some cases device switch on the RX termination after long delay of host enabling the VBUS. In few other cases it has been seen that device fails to negotiate link training in first attempt. It has been reported till now that few devices take as long as 2000 ms to train the link after host enabling its VBUS and RX termination. This patch implements a 2000 ms timeout for CSC bit to set ie for link training. If in a case link trains before timeout, loop will exit earlier. This patch implements above delay, but only for SS device and when persist is enabled. So, for the good device overhead is almost none. While for the bad devices penalty could be the time which it take for link training. But, If a device was connected before suspend, and was removed while system was asleep, then the penalty would be the timeout ie 2000 ms. Results: Verbatim USB SS hard disk connected with STiH407 USB host running 3.10 Kernel resumes in 461 msecs without this patch, but hard disk is assigned a new device address. Same system resumes in 790 msecs with this patch, but with old device address. Signed-off-by:
Pratyush Anand <pratyush.anand@st.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Oliver Neukum authored
commit 5ee0f803 upstream. Some laptops have an internal port for a BT device which picks up noise when the kill switch is used, but not enough to trigger printk_rlimit(). So we shouldn't log consecutive faults of this kind. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Romain Degez authored
commit b32bfc06 upstream. Add support of the Promise FastTrak TX8660 SATA HBA in ahci mode by registering the board in the ahci_pci_tbl[]. Note: this HBA also provide a hardware RAID mode when activated in BIOS but specific drivers from the manufacturer are required in this case. Signed-off-by:
Romain Degez <romain.degez@gmail.com> Tested-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Alan Stern authored
commit 977dcfdc upstream. This patch fixes a bug in ohci-hcd. When an URB is unlinked, the corresponding Endpoint Descriptor is added to the ed_rm_list and taken off the hardware schedule. Once the ED is no longer visible to the hardware, finish_unlinks() handles the URBs that were unlinked or have completed. If any URBs remain attached to the ED, the ED is added back to the hardware schedule -- but only if the controller is running. This fails when a controller dies. A non-empty ED does not get added back to the hardware schedule and does not remain on the ed_rm_list; ohci-hcd loses track of it. The remaining URBs cannot be unlinked, which causes the USB stack to hang. The patch changes finish_unlinks() so that non-empty EDs remain on the ed_rm_list if the controller isn't running. This requires moving some of the existing code around, to avoid modifying the ED's hardware fields more than once. Signed-off-by:
-
James Bottomley authored
commit 89fb4cd1 upstream. Flush commands don't transfer data and thus need to be special cased in the I/O completion handler so that we can propagate errors to the block layer and filesystem. Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Reported-by:
Steven Haber <steven@qumulo.com> Tested-by:
-
Vladimir Davydov authored
commit 093facf3 upstream. If the current process is exiting, lingering on socket close will make it unkillable, so we should avoid it. Reproducer: #include <sys/types.h> #include <sys/socket.h> #define BTPROTO_L2CAP 0 #define BTPROTO_SCO 2 #define BTPROTO_RFCOMM 3 int main() { int fd; struct linger ling; fd = socket(PF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM); //or: fd = socket(PF_BLUETOOTH, SOCK_DGRAM, BTPROTO_L2CAP); //or: fd = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO); ling.l_onoff = 1; ling.l_linger = 1000000000; setsockopt(fd, SOL_SOCKET, SO_LINGER, &ling, sizeof(ling)); return 0; } Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Christoph Schulz authored
commit cbace46a upstream. Commit 30919b0b ("x86: avoid low BIOS area when allocating address space") moved the test for resource allocations that fall within the first 1MB of address space from the PCI-specific path to a generic path, such that all resource allocations will avoid this area. However, this breaks ISA cards which need to allocate a memory region within the first 1MB. An example is the i82365 PCMCIA controller and derivatives like the Ricoh RF5C296/396 which map part of the PCMCIA socket memory address space into the first 1MB of system memory address space. They do not work anymore as no usable memory region exists due to this change: Intel ISA PCIC probe: Ricoh RF5C296/396 ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets host opts [0]: none host opts [1]: none ISA irqs (scanned) = 3,4,5,9,10 status change on irq 10 pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff pcmcia_socket pcmcia_socket0: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0dffff: clean. pcmcia_socket pcmcia_socket0: cs: memory probe 0x0e0000-0x0effff: clean. pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff pcmcia_socket pcmcia_socket1: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff pcmcia_socket pcmcia_socket1: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff: clean. pcmcia_socket pcmcia_socket1: cs: memory probe 0x0e0000-0x0effff: clean. pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean. pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia_socket pcmcia_socket1: cs: memory probe 0x0cc000-0x0effff: excluding 0xe0000-0xeffff pcmcia_socket pcmcia_socket1: cs: unable to map card memory! If filtering out the first 1MB is reverted, everything works as expected. Tested-by:
Robert Resch <fli4l@robert.reschpara.de> Signed-off-by:
Christoph Schulz <develop@kristov.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Kevin Hao authored
commit a152056c upstream. I got the following panic on my fsl p5020ds board. Unable to handle kernel paging request for data at address 0x7375627379737465 Faulting instruction address: 0xc000000000100778 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=24 CoreNet Generic Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140613 #145 task: c0000000fe080000 ti: c0000000fe088000 task.ti: c0000000fe088000 NIP: c000000000100778 LR: c00000000010073c CTR: 0000000000000000 REGS: c0000000fe08aa00 TRAP: 0300 Not tainted (3.15.0-next-20140613) MSR: 0000000080029000 <CE,EE,ME> CR: 24ad2e24 XER: 00000000 DEAR: 7375627379737465 ESR: 0000000000000000 SOFTE: 1 GPR00: c0000000000c99b0 c0000000fe08ac80 c0000000009598e0 c0000000fe001d80 GPR04: 00000000000000d0 0000000000000913 c000000007902b20 0000000000000000 GPR08: c0000000feaae888 0000000000000000 0000000007091000 0000000000200200 GPR12: 0000000028ad2e28 c00000000fff4000 c0000000007abe08 0000000000000000 GPR16: c0000000007ab160 c0000000007aaf98 c00000000060ba68 c0000000007abda8 GPR20: c0000000007abde8 c0000000feaea6f8 c0000000feaea708 c0000000007abd10 GPR24: c000000000989370 c0000000008c6228 00000000000041ed c0000000fe00a400 GPR28: c00000000017c1cc 00000000000000d0 7375627379737465 c0000000fe001d80 NIP [c000000000100778] .__kmalloc_track_caller+0x70/0x168 LR [c00000000010073c] .__kmalloc_track_caller+0x34/0x168 Call Trace: [c0000000fe08ac80] [c00000000087e6b8] uevent_sock_list+0x0/0x10 (unreliable) [c0000000fe08ad20] [c0000000000c99b0] .kstrdup+0x44/0x90 [c0000000fe08adc0] [c00000000017c1cc] .__kernfs_new_node+0x4c/0x130 [c0000000fe08ae70] [c00000000017d7e4] .kernfs_new_node+0x2c/0x64 [c0000000fe08aef0] [c00000000017db00] .kernfs_create_dir_ns+0x34/0xc8 [c0000000fe08af80] [c00000000018067c] .sysfs_create_dir_ns+0x58/0xcc [c0000000fe08b010] [c0000000002c711c] .kobject_add_internal+0xc8/0x384 [c0000000fe08b0b0] [c0000000002c7644] .kobject_add+0x64/0xc8 [c0000000fe08b140] [c000000000355ebc] .device_add+0x11c/0x654 [c0000000fe08b200] [c0000000002b5988] .add_disk+0x20c/0x4b4 [c0000000fe08b2c0] [c0000000003a21d4] .add_mtd_blktrans_dev+0x340/0x514 [c0000000fe08b350] [c0000000003a3410] .mtdblock_add_mtd+0x74/0xb4 [c0000000fe08b3e0] [c0000000003a32cc] .blktrans_notify_add+0x64/0x94 [c0000000fe08b470] [c00000000039b5b4] .add_mtd_device+0x1d4/0x368 [c0000000fe08b520] [c00000000039b830] .mtd_device_parse_register+0xe8/0x104 [c0000000fe08b5c0] [c0000000003b8408] .of_flash_probe+0x72c/0x734 [c0000000fe08b750] [c00000000035ba40] .platform_drv_probe+0x38/0x84 [c0000000fe08b7d0] [c0000000003599a4] .really_probe+0xa4/0x29c [c0000000fe08b870] [c000000000359d3c] .__driver_attach+0x100/0x104 [c0000000fe08b900] [c00000000035746c] .bus_for_each_dev+0x84/0xe4 [c0000000fe08b9a0] [c0000000003593c0] .driver_attach+0x24/0x38 [c0000000fe08ba10] [c000000000358f24] .bus_add_driver+0x1c8/0x2ac [c0000000fe08bab0] [c00000000035a3a4] .driver_register+0x8c/0x158 [c0000000fe08bb30] [c00000000035b9f4] .__platform_driver_register+0x6c/0x80 [c0000000fe08bba0] [c00000000084e080] .of_flash_driver_init+0x1c/0x30 [c0000000fe08bc10] [c000000000001864] .do_one_initcall+0xbc/0x238 [c0000000fe08bd00] [c00000000082cdc0] .kernel_init_freeable+0x188/0x268 [c0000000fe08bdb0] [c0000000000020a0] .kernel_init+0x1c/0xf7c [c0000000fe08be30] [c000000000000884] .ret_from_kernel_thread+0x58/0xd4 Instruction dump: 41bd0010 480000c8 4bf04eb5 60000000 e94d0028 e93f0000 7cc95214 e8a60008 7fc9502a 2fbe0000 419e00c8 e93f0022 <7f7e482a> 39200000 88ed06b2 992d06b2 ---[ end trace b4c9a94804a42d40 ]--- It seems that the corrupted partition header on my mtd device triggers a bug in the ftl. In function build_maps() it will allocate the buffers needed by the mtd partition, but if something goes wrong such as kmalloc failure, mtd read error or invalid partition header parameter, it will free all allocated buffers and then return non-zero. In my case, it seems that partition header parameter 'NumTransferUnits' is invalid. And the ftl_freepart() is a function which free all the partition buffers allocated by build_maps(). Given the build_maps() is a self cleaning function, so there is no need to invoke this function even if build_maps() return with error. Otherwise it will causes the buffers to be freed twice and then weird things would happen. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit 242841d3 upstream. Tested-and-reported-by:
yullaw <yullaw@mageia.cz> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Antti Palosaari authored
commit db4175ae upstream. Only supported modulation for DVB-S is QPSK. Modulation parameter contains invalid value for DVB-S on some cases, which leads driver refusing tuning attempt. Due to that, hard code modulation to QPSK in case of DVB-S. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Peter Hurley authored
commit ae84db96 upstream. When a tty is opened for the serial console, the termios c_cflag settings are inherited from the console line settings. However, if the tty is subsequently closed, the termios settings are lost. This results in a garbled console if the console is later suspended and resumed. Preserve the termios c_cflag for the serial console when the tty is shutdown; this reflects the most recent line settings. Fixes: Bugzilla #69751, 'serial console does not wake from S3' Reported-by:
Valerio Vanni <valerio.vanni@inwind.it> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
