- 12 Nov, 2022 3 commits
-
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: vlan: claim one bit from sk_buff First patch claims skb->vlan_present. This means some bpf changes, eg for sparc32 that I could not test. Second patch removes one conditional test in gro_list_prepare(). ==================== Link: https://lore.kernel.org/r/20221109095759.1874969-1-edumazet@google.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
We can remove a conditional test in gro_list_prepare() by comparing vlan_all fields of the two skbs. Notes: While comparing the vlan_proto is not strictly needed, because part of the following compare_ether_header() call, using 32bit word is actually faster than using 16bit values. napi_reuse_skb() makes sure to clear skb->vlan_all, as it already calls __vlan_hwaccel_clear_tag() Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by:
-
Eric Dumazet authored
skb->vlan_present seems redundant. We can instead derive it from this boolean expression: vlan_present = skb->vlan_proto != 0 || skb->vlan_tci != 0 Add a new union, to access both fields in a single load/store when possible. union { u32 vlan_all; struct { __be16 vlan_proto; __u16 vlan_tci; }; }; This allows following patch to remove a conditional test in GRO stack. Note: We move remcsum_offload to keep TC_AT_INGRESS_MASK and SKB_MONO_DELIVERY_TIME_MASK unchanged. Signed-off-by:Yonghong Song <yhs@fb.com> Acked-by:
-
- 11 Nov, 2022 37 commits
-
-
David S. Miller authored
Jacob Keller says: ==================== ptp: convert remaining users of .adjfreq A handful of drivers remain which still use the .adjfreq interface instead of the newer .adjfine interface. The new interface is preferred as it has a more precise adjustment using scaled parts per million. A handful of the remaining drivers are implemented with a common pattern that can be refactored to use the adjust_by_scaled_ppm and diff_by_scaled_ppm helper functions. These include the ptp_phc, ptp_ixp64x, tg3, hclge, stmac, cpts and bnxt drivers. These are each refactored in a separate change. The remaining drivers, bnx2x, liquidio, cxgb4, fec, and qede implement .adjfreq in a way different from the normal pattern expected by adjust_by_scaled_ppm. Fixing these drivers to properly use .adjfine requires specific knowledge of the hardware implementation. Instead I simply refactor them to use .adjfine and convert scaled_ppm into ppb using the scaled_ppm_to_ppb function. Finally, the .adjfreq implementation interface is removed entirely. This simplifies the interface and ensures that new drivers must implement the new interface as they no longer have an alternative. This still leaves parts per billion used as part of the max_adj interface, and the core PTP stack still converts scaled_ppm to ppb to check this. I plan to investigate fixing this in the future. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Now that all drivers have been converted to .adjfine, we can remove the .adjfreq from the interface structure. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Jacob Keller authored
Convert all remaining drivers that still use .adjfreq to the newer .adjfine implementation. These drivers are not straightforward, as they use non-standard methods of programming their hardware. They are all converted to use scaled_ppm_to_ppb to get the parts per billion value that their logic depends on. Signed-off-by:
-
Jacob Keller authored
When the BNXT_FW_CAP_PTP_RTC flag is not set, the bnxt driver implements .adjfreq on a cyclecounter in terms of the straightforward "base * ppb / 1 billion" calculation. When BNXT_FW_CAP_PTP_RTC is set, the driver forwards the ppb value to firmware for configuration. Convert the driver to the newer .adjfine interface, updating the cyclecounter calculation to use adjust_by_scaled_ppm to perform the calculation. Use scaled_ppm_to_ppb when forwarding the correction to firmware. Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
-
Jacob Keller authored
The cpts implementation of .adjfreq is implemented in terms of a straight forward "base * ppb / 1 billion" calculation. Convert this to the newer .adjfine, using the recently added adjust_by_scaled_ppm helper function. Signed-off-by:
-
Jacob Keller authored
The stmac implementation of .adjfreq is implemented in terms of a straight forward "base * ppb / 1 billion" calculation. Convert this to the newer .adjfine, using the recently added adjust_by_scaled_ppm helper function. Signed-off-by:
-
Jacob Keller authored
The hclge implementation of .adjfreq is implemented in terms of a straight forward "base * ppb / 1 billion" calculation. Convert this to the newer .adjfine, using the recently added adjust_by_scaled_ppm helper function. Signed-off-by:
-
Jacob Keller authored
The tg3 implementation of .adjfreq is implemented in terms of a straight forward "base * ppb / 1 billion" calculation. Convert this to the newer .adjfine, using the recently added diff_by_scaled_ppm helper function to calculate the difference and direction of the adjustment. Signed-off-by:
-
Jacob Keller authored
The ptp_ixp46x implementation of .adjfreq is implemented in terms of a straight forward "base * ppb / 1 billion" calculation. Convert this to the newer .adjfine, using the recently added adjust_by_scaled_ppm helper function. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Jacob Keller authored
The ptp_phc implementation of .adjfreq is implemented in terms of a straight forward "base * ppb / 1 billion" calculation. Convert this to the newer .adjfine, updating the driver to use the recently introduced adjust_by_scaled_ppm helper function. Signed-off-by:
-
David S. Miller authored
Oleksandr Mazur says: ==================== net: marvell: prestera: pci: add support for AC5X family devices This patch series introduces a support for AC5X family devices. AC5X devices utilize arm64 CPUs, and thus require a new FW (arm64-one) to be loaded. The new FW-image for AC5X devices has been introduces in the linux-firmware repo under the following commit: 60310c2deb8c ("Merge branch 'prestera-v4.1' of https://github.com/PLVision/linux-firmware") ==================== Signed-off-by: -
Oleksandr Mazur authored
Bump MIN version to reflect support of new platform (AC5X family devices). Signed-off-by:
Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by:
-
Maksym Glubokiy authored
Add support for the following AC5x Marvell Prestera PP family devices: 98DX7312M (12x25G / 8x25G + 1x100G); 98DX3500 (24x1G + 6x25G); 98DX3501 (16x1G + 6x10G); 98DX3510 (48x1G + 6x25G); 98DX3520 (24x2.5G + 6x25G); Known issues: - FW reload doesn't work (rmmod/modprobe sequence). Co-developed-by:
Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by:
Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by:
-
Oleksandr Mazur authored
Use defines with proper device names instead of device-id in pci-devices listing. Signed-off-by:
-
David S. Miller authored
Horatiu Vultur says: ==================== net: lan966x: Add xdp support Add support for xdp in lan966x driver. Currently only XDP_PASS and XDP_DROP are supported. The first 2 patches are just moving things around just to simplify the code for when the xdp is added. Patch 3 actually adds the xdp. Currently the only supported actions are XDP_PASS and XDP_DROP. In the future this will be extended with XDP_TX and XDP_REDIRECT. Patch 4 changes to use page pool API, because the handling of the pages is similar with what already lan966x driver is doing. In this way is possible to remove some of the code. All these changes give a small improvement on the RX side: Before: iperf3 -c 10.96.10.1 -R [ 5] 0.00-10.01 sec 514 MBytes 430 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 509 MBytes 427 Mbits/sec receiver After: iperf3 -c 10.96.10.1 -R [ 5] 0.00-10.02 sec 540 MBytes 452 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 537 MBytes 450 Mbits/sec receiver --- v2->v3: - inline lan966x_xdp_port_present - update max_len of page_pool_params not to be the page size anymore but actually be rx->max_mtu. v1->v2: - rebase on net-next, once the fixes for FDMA and MTU were accepted - drop patch 2, which changes the MTU as is not needed anymore - allow to run xdp programs on frames bigger than 4KB ==================== Signed-off-by: -
Horatiu Vultur authored
Use the page_pool API for allocation, freeing and DMA handling instead of dev_alloc_pages, __free_pages and dma_map_page. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
Horatiu Vultur authored
Introduce basic XDP support to lan966x driver. Currently the driver supports only the actions XDP_PASS, XDP_DROP and XDP_ABORTED. Signed-off-by:
-
Horatiu Vultur authored
The function lan966x_fdma_rx_get_frame was unmapping the frame from device and check also if the frame was received on a valid port. And only after that it tried to generate the skb. Move this check in a different function, in preparation for xdp support. Such that xdp to be added here and the lan966x_fdma_rx_get_frame to be used only when giving the skb to upper layers. Signed-off-by:
-
Horatiu Vultur authored
The total length of IFH(inter frame header) in bytes is calculated as IFH_LEN * sizeof(u32). Because IFH_LEN describes the length in words and not in bytes. As the length of IFH in bytes is used quite often, add a define for this. This is just to simplify the things. Signed-off-by:
-
Yinjun Zhang authored
Set irq affinity to cpus that belong to the same numa node with NIC device first. Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
David S. Miller authored
Steen Hegelund says: ==================== Extend TC key support for Sparx5 IS2 VCAP This provides extended tc flower filter key support for the Sparx5 VCAP functionality. It builds on top of the initial IS2 VCAP support found in this series: https://lore.kernel.org/all/20221020130904.1215072-1-steen.hegelund@microchip.com/ Overview: ========= The added flower filter key (dissector) support is this: - ipv4_addr (sip and dip) - ipv6_addr (sip and dip) - control (IPv4 fragments) - portnum (tcp and udp port numbers) - basic (L3 and L4 protocol) - vlan (outer vlan tag info) - tcp (tcp flags) - ip (tos field) The IS2 VCAP supports classified VLAN information which amounts to the outer VLAN info in case of multiple tags. Functionality: ============== Before frames can match IS2 VCAP rules with e.g an IPv4 source address, the IS2 VCAPs keyset configuration must include keyset that contains a IPv4 source address and this must be configured for the lookup/port/traffic-type that you want to match on. The Sparx5 IS2 VCAP has the following traffic types: - Non-Ethernet frames - IPv4 Unicast frames - IPv4 Multicast frames - IPv6 Unicast frames - IPv6 Multicast frames - ARP frames So to cover IPv4 traffic the two IPv4 categories must be configured with a keyset that contains IPv4 address information such as the VCAP_KFS_IP4_TCP_UDP keyset. The IPv4 and IPv6 traffic types are configured with useful default keysets, in later series we will use the tc template functionality when we want to change these defaults. The flower filter must contain a goto action as its last action and the chain id must specify the chain id of the next lookup in a VCAP or a destination outside the VCAP ranges. To activate the VCAP lookups on a port you must add a TC matchall filter on the port containing a single goto action that points to the chain id of the first lookup in the IS2 VCAP. From then on frames arriving on this port will be matched against the rules in the IS2 VCAP lookups. Removing the matchall filter will deactivate the IS2 lookups, but will leave the VCAP rules in the memory of the VCAP instance, and from then in frames will no longer be matched against the rules the in IS2 VCAP. If the matchall rule is added back again the IS2 rules will be active once more. Delivery: ========= This is current plan for delivering the full VCAP feature set of Sparx5: - TC flower filter statistics and rule order by size and priority - debugfs support for inspecting rules - support for TC protocol all - Sparx5 IS0 VCAP support - add TC policer and drop action support (depends on the Sparx5 QoS support upstreamed separately) - Sparx5 ES0 VCAP support - TC flower template support - TC matchall filter support for mirroring and policing ports - TC flower filter mirror action support - Sparx5 ES2 VCAP support Version History: ================ v6 Rebased on the latest next-next master branch. No other implementation changes. v5 Add support for a TC matchall filter with a single goto action which will activate the lookups of the VCAP. Removing this filter will deactivate the VCAP lookups again. v4 Add support for TC flower filter goto action and a check of the actions: check action combinations and the goto chain id. v3 Add some more details to the explanation in the commit message about support for MAC_ETYPE keysets and "protocol all" as well as the classified VLAN information. This is done to help testing the feature. No implementation changes in this version. v2 Split one of the KUNIT tests into 3 tests to fix a kernel robot build warning. v1 Initial version ==================== Signed-off-by:
-
Steen Hegelund authored
This tests that the available keyfield and actionfield add methods are doing the exepected work: adding the value (and mask) to the keyfield/actionfield list item in the rule. The test also covers the functionality that matches a rule to a keyset. Signed-off-by:
Steen Hegelund <steen.hegelund@microchip.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Steen Hegelund authored
Use a tc matchall rule with a goto action to the VCAP specific chain to enable the VCAP lookups. If the matchall rule is removed the VCAP lookups will be disabled again using its cookie as lookup to find the VCAP instance. To enable the Sparx5 IS2 VCAP on eth0 you would use this command: tc filter add dev eth0 ingress prio 5 handle 5 matchall \ skip_sw action goto chain 8000000 as the first lookup in IS2 has chain id 8000000 Signed-off-by: -
Steen Hegelund authored
Add support for validating keyfields and actionfields when they are added to a VCAP rule. We need to ensure that the field is not already present and that the field is in the key- or actionset, if the client has added a key- or actionset to the rule at this point. Signed-off-by:
-
Steen Hegelund authored
This tries to match the keys in a rule with the keysets supported by the VCAP instance, and generate a list of keysets. This list is then validated against the list of keysets that is currently selected for the lookups (per port) in the VCAP configuration. The Sparx5 IS2 only has one actionset, so there is no actionset matching performed for now. Signed-off-by:
-
Steen Hegelund authored
Add support for a goto action and ensure that a HW offloaded TC flower filter has a valid goto action and that pass and trap actions are not both used in the same filter. Signed-off-by:
-
Steen Hegelund authored
Add a helper function that finds the lookup index in a VCAP instance from the chain id. Signed-off-by:
-
Steen Hegelund authored
This adds the following TC flower filter keys to Sparx5 for IS2: - ipv4_addr (sip and dip) - ipv6_addr (sip and dip) - control (IPv4 fragments) - portnum (tcp and udp port numbers) - basic (L3 and L4 protocol) - vlan (outer vlan tag info) - tcp (tcp flags) - ip (tos field) as well as an 128 bit keyfield interface on the VCAP API to set the IPv6 addresses. IS2 supports the classified VLAN information which amounts to the outer VLAN info in case of multiple tags. Here are some examples of the tc flower filter operations that are now supported for the IS2 VCAP: - IPv4 Addresses tc filter add dev eth12 ingress chain 8000000 prio 12 handle 12 \ protocol ip flower skip_sw dst_ip 1.0.1.1 src_ip 2.0.2.2 \ action trap action goto chain 81000000 - IPv6 Addresses tc filter add dev eth12 ingress chain 8000000 prio 13 handle 13 \ protocol ipv6 flower skip_sw dst_ip 1::1:1 src_ip 2::2:2 \ action trap action goto chain 81000000 - IPv4 fragments tc filter add dev eth12 ingress chain 8000000 prio 14 handle 14 \ protocol ip flower skip_sw dst_ip 3.0.3.3 src_ip 2.0.2.2 \ ip_flags frag/nofirstfrag action trap action goto chain 81000000 - TCP and UDP portnumbers tc filter add dev eth12 ingress chain 8000000 prio 21 handle 21 \ protocol ip flower skip_sw dst_ip 8.8.8.8 src_ip 2.0.2.2 \ ip_proto tcp dst_port 100 src_port 12000 action trap action goto chain 81000000 tc filter add dev eth12 ingress chain 8000000 prio 23 handle 23 \ protocol ipv6 flower skip_sw dst_ip 5::5:5 src_ip 2::2:2 \ ip_proto tcp dst_port 300 src_port 13000 action trap action goto chain 81000000 - Layer 3 and Layer 4 protocol info tc filter add dev eth12 ingress chain 8000000 prio 28 handle 28 \ protocol ipv4 flower skip_sw dst_ip 9.0.9.9 src_ip 2.0.2.2 \ ip_proto icmp action trap action goto chain 81000000 - VLAN tag info (outer tag) tc filter add dev eth12 ingress chain 8000000 prio 29 handle 29 \ protocol 802.1q flower skip_sw vlan_id 600 vlan_prio 6 \ vlan_ethtype ipv4 action trap action goto chain 81000000 tc filter add dev eth12 ingress chain 8000000 prio 31 handle 31 \ protocol 802.1q flower skip_sw vlan_id 600 vlan_prio 5 \ vlan_ethtype ipv6 action trap action goto chain 81000000 - TCP flags tc filter add dev eth12 ingress chain 8000000 prio 15 handle 15 \ protocol ip flower skip_sw dst_ip 4.0.4.4 src_ip 2.0.2.2 \ ip_proto tcp tcp_flags 0x2a/0x3f action trap action goto chain 81000000 - IP info (IPv4 TOS field) tc filter add dev eth12 ingress chain 8000000 prio 16 handle 16 \ protocol ip flower skip_sw ip_tos 0x35 dst_ip 5.0.5.5 \ src_ip 2.0.2.2 action trap action goto chain 81000000 Notes: - The "protocol all" selection is not supported yet. - The MAC address rule now needs to use non-ip and non "protocol all". Here is an example: tc filter add dev eth12 ingress chain 8000000 prio 10 handle 10 \ protocol 0xbeef flower skip_sw \ dst_mac 0a:0b:0c:0d:0e:0f \ src_mac 2:0:0:0:0:1 \ action trap action goto chain 81000000 - The VLAN rules use classified VLAN information, and to get the classification information into the frame metadata, the ingress port need to be added to a bridge with the VID and vlan filtering enabled, like this (using VID 600 and four ports eth12, eth13, eth14 and eth15): ip link add name br5 type bridge ip link set dev br5 up ip link set eth12 master br5 ip link set eth13 master br5 ip link set eth14 master br5 ip link set eth15 master br5 sysctl -w net.ipv6.conf.eth12.disable_ipv6=1 sysctl -w net.ipv6.conf.eth13.disable_ipv6=1 sysctl -w net.ipv6.conf.eth14.disable_ipv6=1 sysctl -w net.ipv6.conf.eth15.disable_ipv6=1 sysctl -w net.ipv6.conf.br5.disable_ipv6=1 ip link set dev br5 type bridge vlan_filtering 1 bridge vlan add dev eth12 vid 600 bridge vlan add dev eth13 vid 600 bridge vlan add dev eth14 vid 600 bridge vlan add dev eth15 vid 600 bridge vlan add dev br5 vid 600 self Signed-off-by:Casper Andersson <casper.casan@gmail.com> Signed-off-by:
-
Steen Hegelund authored
This changes the port keyset configuration for Sparx5 IS2 so that - IPv4 generates a IP4_TCP_UDP keyset for IPv4 TCP/UDP frames and a IP4_OTHER keyset for other IPv4 frames (both UC and MC) - IPv6 generates a IP_7TUPLE keyset (both UC and MC) ARP and non-IP traffic continues to generate the MAC_ETYPE keyset Signed-off-by:
-
David S. Miller authored
Lorenzo Bianconi says: ==================== introduce WED RX support to MT7986 SoC Similar to TX counterpart available on MT7622 and MT7986, introduce RX Wireless Ethernet Dispatch available on MT7986 SoC in order to offload traffic received by wlan nic to the wired interfaces (lan/wan). Changes since v3: - remove reset property in ethsys dts node - rely on readx_poll_timeout in wo mcu code - fix typos - move wo-ccif binding in soc folder - use reserved-memory for wo-dlm - improve wo-ccif binding Changes since v2: - rely on of_reserved_mem APIs in mcu code - add some dts fixes - rename {tx,rx}_wdma in {rx,tx}_wdma - update entry in maintainers file Changes since v1: - fix sparse warnings - rely on memory-region property in mt7622-wed.yaml - some more binding fixes ==================== Signed-off-by: -
Lorenzo Bianconi authored
Update MEDIATEK ETHERNET driver maintainer file enty adding myself to maintainers list Acked-by:
Felix Fietkau <nbd@nbd.name> Acked-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Introduce WED RX MIB counters support available on MT7986a SoC. Tested-by:
Daniel Golle <daniel@makrotopia.org> Co-developed-by:
Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by:
-
Lorenzo Bianconi authored
Enable RX Wireless Ethernet Dispatch available on MT7986 Soc. Tested-by:
-
Lorenzo Bianconi authored
Rename tx_wdma queue array in rx_wdma since this is rx side of wdma soc. Moreover rename mtk_wed_wdma_ring_setup routine in mtk_wed_wdma_rx_ring_setup() Signed-off-by:
-
Lorenzo Bianconi authored
Introduce WO chip support to mtk wed driver. MTK WED WO is used to implement RX Wireless Ethernet Dispatch and offload traffic received by wlan nic to the wired interface. Tested-by:
-
Sujuan Chen authored
Introduce WED mcu support used to configure WED WO chip. This is a preliminary patch in order to add RX Wireless Ethernet Dispatch available on MT7986 SoC. Tested-by:
-
Lorenzo Bianconi authored
Document the binding for the RX Wireless Ethernet Dispatch core on the MT7986 ethernet driver used to offload traffic received by WLAN NIC and forwarded to LAN/WAN one. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
