- 09 Aug, 2020 40 commits
-
-
Kamal Mostafa authored
BugLink: https://bugs.launchpad.net/bugs/1888690 Ignore: yes Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1888690Signed-off-by:
-
Vincent Guittot authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 01cfcde9 upstream. task_h_load() can return 0 in some situations like running stress-ng mmapfork, which forks thousands of threads, in a sched group on a 224 cores system. The load balance doesn't handle this correctly because env->imbalance never decreases and it will stop pulling tasks only after reaching loop_max, which can be equal to the number of running tasks of the cfs. Make sure that imbalance will be decreased by at least 1. misfit task is the other feature that doesn't handle correctly such situation although it's probably more difficult to face the problem because of the smaller number of CPUs and running tasks on heterogenous system. We can't simply ensure that task_h_load() returns at least one because it would imply to handle underflow in other places. Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Valentin Schneider <valentin.schneider@arm.com> Reviewed-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Michał Mirosław authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit b037d60a upstream. Uninterruptible context is not needed in the driver and causes lockdep warning because of mutex taken in of_alias_get_id(). Convert the lock to mutex to avoid the issue. Cc: stable@vger.kernel.org Fixes: 099343c6 ("ARM: at91: atmel-ssc: add device tree support") Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/50f0d7fa107f318296afb49477c3571e4d6978c5.1592998403.git.mirq-linux@rere.qmqm.plSigned-off-by:
-
Krzysztof Kozlowski authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit f5e5677c upstream. NULL pointer exception happens occasionally on serial output initiated by login timeout. This was reproduced only if kernel was built with significant debugging options and EDMA driver is used with serial console. col-vf50 login: root Password: Login timed out after 60 seconds. Unable to handle kernel NULL pointer dereference at virtual address 00000044 Internal error: Oops: 5 [#1] ARM CPU: 0 PID: 157 Comm: login Not tainted 5.7.0-next-20200610-dirty #4 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (fsl_edma_tx_handler) from [<8016eb10>] (__handle_irq_event_percpu+0x64/0x304) (__handle_irq_event_percpu) from [<8016eddc>] (handle_irq_event_percpu+0x2c/0x7c) (handle_irq_event_percpu) from [<8016ee64>] (handle_irq_event+0x38/0x5c) (handle_irq_event) from [<801729e4>] (handle_fasteoi_irq+0xa4/0x160) (handle_fasteoi_irq) from [<8016ddcc>] (generic_handle_irq+0x34/0x44) (generic_handle_irq) from [<8016e40c>] (__handle_domain_irq+0x54/0xa8) (__handle_domain_irq) from [<80508bc8>] (gic_handle_irq+0x4c/0x80) (gic_handle_irq) from [<80100af0>] (__irq_svc+0x70/0x98) Exception stack(0x8459fe80 to 0x8459fec8) fe80: 72286b00 e3359f64 00000001 0000412d a0070013 85c98840 85c98840 a0070013 fea0: 8054e0d4 00000000 00000002 00000000 00000002 8459fed0 8081fbe8 8081fbec fec0: 60070013 ffffffff (__irq_svc) from [<8081fbec>] (_raw_spin_unlock_irqrestore+0x30/0x58) (_raw_spin_unlock_irqrestore) from [<8056cb48>] (uart_flush_buffer+0x88/0xf8) (uart_flush_buffer) from [<80554e60>] (tty_ldisc_hangup+0x38/0x1ac) (tty_ldisc_hangup) from [<8054c7f4>] (__tty_hangup+0x158/0x2bc) (__tty_hangup) from [<80557b90>] (disassociate_ctty.part.1+0x30/0x23c) (disassociate_ctty.part.1) from [<8011fc18>] (do_exit+0x580/0xba0) (do_exit) from [<801214f8>] (do_group_exit+0x3c/0xb4) (do_group_exit) from [<80121580>] (__wake_up_parent+0x0/0x14) Issue looks like race condition between interrupt handler fsl_edma_tx_handler() (called as result of fsl_edma_xfer_desc()) and terminating the transfer with fsl_edma_terminate_all(). The fsl_edma_tx_handler() handles interrupt for a transfer with already freed edesc and idle==true. Fixes: d6be34fb ("dma: Add Freescale eDMA engine driver support") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Robin Gong <yibin.gong@nxp.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1591877861-28156-2-git-send-email-krzk@kernel.orgSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Vishwas M authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 14b0e83d upstream. This patch fixes a bug which does not let FAN mode to be changed from sysfs(pwm1_enable). i.e pwm1_enable can not be set to 3, it will always remain at 0. This is caused because the device driver handles the result of "read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg)" incorrectly. The driver thinks an error has occurred if the (result != 0). This has been fixed by changing the condition to (result < 0). Signed-off-by:
Vishwas M <vishwas.reddy.vr@gmail.com> Link: https://lore.kernel.org/r/20200707142747.118414-1-vishwas.reddy.vr@gmail.com Fixes: 9df7305b ("hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller") Cc: stable@vger.kernel.org Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Huacai Chen authored
BugLink: https://bugs.launchpad.net/bugs/1888690 Commit ed26aacf ("mips: Add udelay lpj numbers adjustment") has backported to 4.4~5.4, but the "struct cpufreq_freqs" (and also the cpufreq notifier machanism) of 4.4~4.19 are different from the upstream kernel. These differences cause build errors, and this patch can fix the build. Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Stable <stable@vger.kernel.org> # 4.4/4.9/4.14/4.19 Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Esben Haabendal authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit bf12fdf0 upstream. While e3a3c3a2 ("UIO: fix uio_pdrv_genirq with device tree but no interrupt") added support for using uio_pdrv_genirq for devices without interrupt for device tree platforms, the removal of uio_pdrv in 26dac3c4 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") broke the support for non device tree platforms. This change fixes this, so that uio_pdrv_genirq can be used without interrupt on all platforms. This still leaves the support that uio_pdrv had for custom interrupt handler lacking, as uio_pdrv_genirq does not handle it (yet). Fixes: 26dac3c4 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") Signed-off-by:
Esben Haabendal <esben@geanix.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200701145659.3978-3-esben@geanix.comSigned-off-by:
-
David Pedersen authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 17d51429 upstream. This fixes two finger trackpad scroll on the Lenovo XiaoXin Air 12. Without nomux, the trackpad behaves as if only one finger is present and moves the cursor when trying to scroll. Signed-off-by:
David Pedersen <limero1337@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200625133754.291325-1-limero1337@gmail.comSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Alexander Usyskin authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit e852c2c2 upstream. It's not needed to set driver to NULL in mei_cl_device_remove() which is bus_type remove() handler as this is done anyway in __device_release_driver(). Actually this is causing an endless loop in driver_detach() on ubuntu patched kernel, while removing (rmmod) the mei_hdcp module. The reason list_empty(&drv->p->klist_devices.k_list) is always not-empty. as the check is always true in __device_release_driver() if (dev->driver != drv) return; The non upstream patch is causing this behavior, titled: 'vfio -- release device lock before userspace requests' Nevertheless the fix is correct also for the upstream. Link: https://patchwork.ozlabs.org/project/ubuntu-kernel/patch/20180912085046.3401-2-apw@canonical.com/ Cc: <stable@vger.kernel.org> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200628225359.2185929-1-tomas.winkler@intel.comSigned-off-by:
-
Chirantan Ekbote authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 31070f6c upstream. The ioctl encoding for this parameter is a long but the documentation says it should be an int and the kernel drivers expect it to be an int. If the fuse driver treats this as a long it might end up scribbling over the stack of a userspace process that only allocated enough space for an int. This was previously discussed in [1] and a patch for fuse was proposed in [2]. From what I can tell the patch in [2] was nacked in favor of adding new, "fixed" ioctls and using those from userspace. However there is still no "fixed" version of these ioctls and the fact is that it's sometimes infeasible to change all userspace to use the new one. Handling the ioctls specially in the fuse driver seems like the most pragmatic way for fuse servers to support them without causing crashes in userspace applications that call them. [1]: https://lore.kernel.org/linux-fsdevel/20131126200559.GH20559@hall.aurel32.net/T/ [2]: https://sourceforge.net/p/fuse/mailman/message/31771759/Signed-off-by:
Chirantan Ekbote <chirantan@chromium.org> Fixes: 59efec7b ("fuse: implement ioctl support") Cc: <stable@vger.kernel.org> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Alexander Lobakin authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 897c44f0 upstream. rproc_serial_id_table lacks an exposure to module devicetable, so when remoteproc firmware requests VIRTIO_ID_RPROC_SERIAL, no uevent is generated and no module autoloading occurs. Add missing MODULE_DEVICE_TABLE() annotation and move the existing one for VIRTIO_ID_CONSOLE right to the table itself. Fixes: 1b637046 ("virtio_console: Add support for remoteproc serial") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by:
Alexander Lobakin <alobakin@pm.me> Reviewed-by:
Amit Shah <amit@kernel.org> Link: https://lore.kernel.org/r/x7C_CbeJtoGMy258nwAXASYz3xgFMFpyzmUvOyZzRnQrgWCREBjaqBOpAUS7ol4NnZYvSVwmTsCG0Ohyfvta-ygw6HMHcoeKK0C3QFiAO_Q=@pm.meSigned-off-by:
-
AceLan Kao authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit da6902e5 upstream. Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jörgen Storvist authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 08d4ef5c upstream. Add USB IDs for GosunCn GM500 series cellular modules. RNDIS config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1404 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option MBIM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1405 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim ECM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1406 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by:
Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Igor Moura authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 5d0136f8 upstream. Add PID for CH340 that's found on some ESP8266 dev boards made by LilyGO. The specific device that contains such serial converter can be seen here: https://github.com/LilyGO/LILYGO-T-OI. Apparently, it's a regular CH340, but I've confirmed with others that also bought this board that the PID found on this device (0x7522) differs from other devices with the "same" converter (0x7523). Simply adding its PID to the driver and rebuilding it made it work as expected. Signed-off-by:
Igor Moura <imphilippini@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
James Hilliard authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 5c45d04c upstream. This is a UPB (Universal Powerline Bus) PIM (Powerline Interface Module) which allows for controlling multiple UPB compatible devices from Linux using the standard serial interface. Based on vendor application source code there are two different models of USB based PIM devices in addition to a number of RS232 based PIM's. The vendor UPB application source contains the following USB ID's: #define USB_PCS_VENDOR_ID 0x04b4 #define USB_PCS_PIM_PRODUCT_ID 0x5500 #define USB_SAI_VENDOR_ID 0x17dd #define USB_SAI_PIM_PRODUCT_ID 0x5500 The first set of ID's correspond to the PIM variant sold by Powerline Control Systems while the second corresponds to the Simply Automated Incorporated PIM. As the product ID for both of these match the default cypress HID->COM RS232 product ID it assumed that they both use an internal variant of this HID->COM RS232 converter hardware. However as the vendor ID for the Simply Automated variant is different we need to also add it to the cypress_M8 driver so that it is properly detected. Signed-off-by:
James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20200616220403.1807003-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org [ johan: amend VID define entry ] Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit e7b931be upstream. The driver would happily overwrite its write buffer with user data in 256 byte increments due to a removed buffer-space sanity check. Fixes: 5fcf62b0 ("tty: iuu_phoenix: fix locking.") Cc: stable <stable@vger.kernel.org> # 2.6.31 Signed-off-by:
-
Zhang Qiang authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 8778eb09 upstream. Add a missing spinlock protection for play_queue, because the play_queue may be destroyed when the "playback_work" work func and "f_audio_out_ep_complete" callback func operate this paly_queue at the same time. Fixes: c6994e6f ("USB: gadget: add USB Audio Gadget driver") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Zhang Qiang <qiang.zhang@windriver.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Peter Chen authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 876d4e1e upstream. If wakeup event occurred by extcon event, it needs to call ci_irq again since the first ci_irq calling at extcon notifier only wakes up controller, but do noop for event handling, it causes the extcon use case can't work well from low power mode. Cc: <stable@vger.kernel.org> Fixes: 3ecb3e09 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Reported-by:
Philippe Schenker <philippe.schenker@toradex.com> Tested-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.orgSigned-off-by:
-
Tom Rix authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 211f0834 upstream. clang static analysis flags this error c67x00-sched.c:489:55: warning: Use of memory after it is freed [unix.Malloc] usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); ^~~~~~~~~~~~ Problem happens in this block of code c67x00_release_urb(c67x00, urb); usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb); spin_unlock(&c67x00->lock); usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); In the call to c67x00_release_urb has this freeing of urbp urbp = urb->hcpriv; urb->hcpriv = NULL; list_del(&urbp->hep_node); kfree(urbp); And so urbp is freed before usb_hcd_giveback_urb uses it as its 3rd parameter. Since all is required is the status, pass the status directly as is done in c64x00_urb_dequeue Fixes: e9b29ffc ("USB: add Cypress c67x00 OTG controller HCD driver") Signed-off-by:
Tom Rix <trix@redhat.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200708131243.24336-1-trix@redhat.comSigned-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 9b7e5208 upstream. USB MIDI driver has an error recovery mechanism to resubmit the URB in the delayed timer handler, and this may race with the standard start / stop operations. Although both start and stop operations themselves don't race with each other due to the umidi->mutex protection, but this isn't applied to the timer handler. For fixing this potential race, the following changes are applied: - Since the timer handler can't use the mutex, we apply the umidi->disc_lock protection at each input stream URB submission; this also needs to change the GFP flag to GFP_ATOMIC - Add a check of the URB refcount and skip if already submitted - Move the timer cancel call at disconnection to the beginning of the procedure; this assures the in-flight timer handler is gone properly before killing all pending URBs Reported-by: syzbot+0f4ecfe6a2c322c81728@syzkaller.appspotmail.com Reported-by: syzbot+5f1d24c49c1d2c427497@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200710160656.16819-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 6e8a914a upstream. LINE6 drivers create stream URBs with a fixed pipe without checking its validity, and this may lead to a kernel WARNING at the submission when a malformed USB descriptor is passed. For avoiding the kernel warning, perform the similar sanity checks for each pipe type at creating a URB. Reported-by: syzbot+c190f6858a04ea7fbc52@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/s5hv9iv4hq8.wl-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit e901b987 upstream. This patch adds a new helper function to perform a sanity check of the given URB to see whether it contains a valid endpoint. It's a light- weight version of what usb_submit_urb() does, but without the kernel warning followed by the stack trace, just returns an error code. Especially for a driver that doesn't parse the descriptor but fills the URB with the fixed endpoint (e.g. some quirks for non-compliant devices), this kind of check is preferable at the probe phase before actually submitting the urb. Tested-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
-
Dmitry Torokhov authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 6363d206 upstream. Neither the trackpad, nor the mouse want input core to generate autorepeat events for their buttons, so let's reset the bit (as hid-input sets it for these devices based on the usage vendor code). Cc: stable@vger.kernel.org Reported-by:
Yariv <oigevald+kernel@gmail.com> Tested-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Álvaro Fernández Rojas authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 3d3fb3c5 upstream. Only v3.3-v5.0 have a different CS0 layout. Controllers before v3.3 use the same layout for every CS. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-3-noltari@gmail.comSigned-off-by:
-
Jin Yao authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 0e0bf1ea upstream. As the code comments in perf_stat_process_counter() say, we calculate counter's data every interval, and the display code shows ps->res_stats avg value. We need to zero the stats for interval mode. But the current code only zeros the res_stats[0], it doesn't zero the res_stats[1] and res_stats[2], which are for ena and run of counter. This patch zeros the whole res_stats[] for interval mode. Fixes: 51fd2df1 ("perf stat: Fix interval output values") Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200409070755.17261-1-yao.jin@linux.intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit ef75e14a ] This code reads from the array before verifying that "trig" is a valid index. If the index is wildly out of bounds then reading from an invalid address could lead to an Oops. Fixes: a8c66b68 ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200709102936.GA20875@mwandaSigned-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Michał Mirosław authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 30517ffe ] Fixed commit moved the assignment of 'req', but did not update a reference in the DBG() call. Use the argument as it was renamed. Fixes: 5fb694f9 ("usb: gadget: udc: atmel: fix possible oops when unloading module") Signed-off-by:
-
Sasha Levin authored
BugLink: https://bugs.launchpad.net/bugs/1888690 This reverts commit 652def4c63b99029fe8b898740f97329c26a2fd3. Eugeniu Rosca writes: On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote: >After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: >Set PM runtime as active on resume") into downstream v4.14.x, we started >to consistently experience below panic [1] on every second s2ram of >R-Car H3 Salvator-X Renesas reference board. > >After some investigations, we concluded the following: > - the issue does not exist in vanilla v5.8-rc4+ > - [bisecting shows that] the panic on v4.14.186 is caused by the lack > of v5.6-rc1 commit 987351e1 ("phy: core: Add consumer device > link support"). Getting evidence for that is easy. Reverting > 987351e1 in vanilla leads to a similar backtrace [2]. > >Questions: > - Backporting 987351e1 ("phy: core: Add consumer device > link support") to v4.14.187 looks challenging enough, so probably not > worth it. Anybody to contradict this? > - Assuming no plans to backport the missing mainline commit to v4.14.x, > should the following three v4.14.186 commits be reverted on v4.14.x? > * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating") > * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume") > * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume") Signed-off-by:
-
Sasha Levin authored
BugLink: https://bugs.launchpad.net/bugs/1888690 This reverts commit 737c975db35b0117fc5c702072ca2df6f2f7eb63. Eugeniu Rosca writes: On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote: >After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: >Set PM runtime as active on resume") into downstream v4.14.x, we started >to consistently experience below panic [1] on every second s2ram of >R-Car H3 Salvator-X Renesas reference board. > >After some investigations, we concluded the following: > - the issue does not exist in vanilla v5.8-rc4+ > - [bisecting shows that] the panic on v4.14.186 is caused by the lack > of v5.6-rc1 commit 987351e1 ("phy: core: Add consumer device > link support"). Getting evidence for that is easy. Reverting > 987351e1 in vanilla leads to a similar backtrace [2]. > >Questions: > - Backporting 987351e1 ("phy: core: Add consumer device > link support") to v4.14.187 looks challenging enough, so probably not > worth it. Anybody to contradict this? > - Assuming no plans to backport the missing mainline commit to v4.14.x, > should the following three v4.14.186 commits be reverted on v4.14.x? > * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating") > * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume") > * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume") Signed-off-by:
-
Sasha Levin authored
BugLink: https://bugs.launchpad.net/bugs/1888690 This reverts commit 13af14dfadcb95030dc8e2e0cacbffc1990a9772. Eugeniu Rosca writes: On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote: >After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: >Set PM runtime as active on resume") into downstream v4.14.x, we started >to consistently experience below panic [1] on every second s2ram of >R-Car H3 Salvator-X Renesas reference board. > >After some investigations, we concluded the following: > - the issue does not exist in vanilla v5.8-rc4+ > - [bisecting shows that] the panic on v4.14.186 is caused by the lack > of v5.6-rc1 commit 987351e1 ("phy: core: Add consumer device > link support"). Getting evidence for that is easy. Reverting > 987351e1 in vanilla leads to a similar backtrace [2]. > >Questions: > - Backporting 987351e1 ("phy: core: Add consumer device > link support") to v4.14.187 looks challenging enough, so probably not > worth it. Anybody to contradict this? > - Assuming no plans to backport the missing mainline commit to v4.14.x, > should the following three v4.14.186 commits be reverted on v4.14.x? > * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating") > * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume") > * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume") Signed-off-by:
-
Andy Shevchenko authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 5f90786b ] The driver can't be loaded automatically because it misses module alias to be provided. Add corresponding MODULE_DEVICE_TABLE() call to the driver. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 1ca0fafd ] This essentially reverts commit 72123032 ("tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets") Mathieu reported that many vendors BGP implementations can actually switch TCP MD5 on established flows. Quoting Mathieu : Here is a list of a few network vendors along with their behavior with respect to TCP MD5: - Cisco: Allows for password to be changed, but within the hold-down timer (~180 seconds). - Juniper: When password is initially set on active connection it will reset, but after that any subsequent password changes no network resets. - Nokia: No notes on if they flap the tcp connection or not. - Ericsson/RedBack: Allows for 2 password (old/new) to co-exist until both sides are ok with new passwords. - Meta-Switch: Expects the password to be set before a connection is attempted, but no further info on whether they reset the TCP connection on a change. - Avaya: Disable the neighbor, then set password, then re-enable. - Zebos: Would normally allow the change when socket connected. We can revert my prior change because commit 9424e2e7 ("tcp: md5: fix potential overestimation of TCP option space") removed the leak of 4 kernel bytes to the wire that was the main reason for my patch. While doing my investigations, I found a bug when a MD5 key is changed, leading to these commits that stable teams want to consider before backporting this revert : Commit 6a2febec ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()") Commit e6ced831 ("tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers") Fixes: 72123032 "tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets" Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit e6ced831 ] My prior fix went a bit too far, according to Herbert and Mathieu. Since we accept that concurrent TCP MD5 lookups might see inconsistent keys, we can use READ_ONCE()/WRITE_ONCE() instead of smp_rmb()/smp_wmb() Clearing all key->key[] is needed to avoid possible KMSAN reports, if key->keylen is increased. Since tcp_md5_do_add() is not fast path, using __GFP_ZERO to clear all struct tcp_md5sig_key is simpler. data_race() was added in linux-5.8 and will prevent KCSAN reports, this can safely be removed in stable backports, if data_race() is not yet backported. v2: use data_race() both in tcp_md5_hash_key() and tcp_md5_do_add() Fixes: 6a2febec ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 6a2febec ] MD5 keys are read with RCU protection, and tcp_md5_do_add() might update in-place a prior key. Normally, typical RCU updates would allocate a new piece of memory. In this case only key->key and key->keylen might be updated, and we do not care if an incoming packet could see the old key, the new one, or some intermediate value, since changing the key on a live flow is known to be problematic anyway. We only want to make sure that in the case key->keylen is changed, cpus in tcp_md5_hash_key() wont try to use uninitialized data, or crash because key->keylen was read twice to feed sg_init_one() and ahash_request_set_crypt() Fixes: 9ea88a15 ("tcp: md5: check md5 signature without socket lock") Signed-off-by:
-
Christoph Paasch authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit ce69e563 ] syzkaller found its way into setsockopt with TCP_CONGESTION "cdg". tcp_cdg_init() does a kcalloc to store the gradients. As sk_clone_lock just copies all the memory, the allocated pointer will be copied as well, if the app called setsockopt(..., TCP_CONGESTION) on the listener. If now the socket will be destroyed before the congestion-control has properly been initialized (through a call to tcp_init_transfer), we will end up freeing memory that does not belong to that particular socket, opening the door to a double-free: [ 11.413102] ================================================================== [ 11.414181] BUG: KASAN: double-free or invalid-free in tcp_cleanup_congestion_control+0x58/0xd0 [ 11.415329] [ 11.415560] CPU: 3 PID: 4884 Comm: syz-executor.5 Not tainted 5.8.0-rc2 #80 [ 11.416544] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 11.418148] Call Trace: [ 11.418534] <IRQ> [ 11.418834] dump_stack+0x7d/0xb0 [ 11.419297] print_address_description.constprop.0+0x1a/0x210 [ 11.422079] kasan_report_invalid_free+0x51/0x80 [ 11.423433] __kasan_slab_free+0x15e/0x170 [ 11.424761] kfree+0x8c/0x230 [ 11.425157] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.425872] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.426493] inet_csk_destroy_sock+0x153/0x2c0 [ 11.427093] tcp_v4_syn_recv_sock+0xb29/0x1100 [ 11.427731] tcp_get_cookie_sock+0xc3/0x4a0 [ 11.429457] cookie_v4_check+0x13d0/0x2500 [ 11.433189] tcp_v4_do_rcv+0x60e/0x780 [ 11.433727] tcp_v4_rcv+0x2869/0x2e10 [ 11.437143] ip_protocol_deliver_rcu+0x23/0x190 [ 11.437810] ip_local_deliver+0x294/0x350 [ 11.439566] __netif_receive_skb_one_core+0x15d/0x1a0 [ 11.441995] process_backlog+0x1b1/0x6b0 [ 11.443148] net_rx_action+0x37e/0xc40 [ 11.445361] __do_softirq+0x18c/0x61a [ 11.445881] asm_call_on_stack+0x12/0x20 [ 11.446409] </IRQ> [ 11.446716] do_softirq_own_stack+0x34/0x40 [ 11.447259] do_softirq.part.0+0x26/0x30 [ 11.447827] __local_bh_enable_ip+0x46/0x50 [ 11.448406] ip_finish_output2+0x60f/0x1bc0 [ 11.450109] __ip_queue_xmit+0x71c/0x1b60 [ 11.451861] __tcp_transmit_skb+0x1727/0x3bb0 [ 11.453789] tcp_rcv_state_process+0x3070/0x4d3a [ 11.456810] tcp_v4_do_rcv+0x2ad/0x780 [ 11.457995] __release_sock+0x14b/0x2c0 [ 11.458529] release_sock+0x4a/0x170 [ 11.459005] __inet_stream_connect+0x467/0xc80 [ 11.461435] inet_stream_connect+0x4e/0xa0 [ 11.462043] __sys_connect+0x204/0x270 [ 11.465515] __x64_sys_connect+0x6a/0xb0 [ 11.466088] do_syscall_64+0x3e/0x70 [ 11.466617] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.467341] RIP: 0033:0x7f56046dc469 [ 11.467844] Code: Bad RIP value. [ 11.468282] RSP: 002b:00007f5604dccdd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a [ 11.469326] RAX: ffffffffffffffda RBX: 000000000068bf00 RCX: 00007f56046dc469 [ 11.470379] RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000004 [ 11.471311] RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000 [ 11.472286] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 11.473341] R13: 000000000041427c R14: 00007f5604dcd5c0 R15: 0000000000000003 [ 11.474321] [ 11.474527] Allocated by task 4884: [ 11.475031] save_stack+0x1b/0x40 [ 11.475548] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 11.476182] tcp_cdg_init+0xf0/0x150 [ 11.476744] tcp_init_congestion_control+0x9b/0x3a0 [ 11.477435] tcp_set_congestion_control+0x270/0x32f [ 11.478088] do_tcp_setsockopt.isra.0+0x521/0x1a00 [ 11.478744] __sys_setsockopt+0xff/0x1e0 [ 11.479259] __x64_sys_setsockopt+0xb5/0x150 [ 11.479895] do_syscall_64+0x3e/0x70 [ 11.480395] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.481097] [ 11.481321] Freed by task 4872: [ 11.481783] save_stack+0x1b/0x40 [ 11.482230] __kasan_slab_free+0x12c/0x170 [ 11.482839] kfree+0x8c/0x230 [ 11.483240] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.483948] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.484502] inet_csk_destroy_sock+0x153/0x2c0 [ 11.485144] tcp_close+0x932/0xfe0 [ 11.485642] inet_release+0xc1/0x1c0 [ 11.486131] __sock_release+0xc0/0x270 [ 11.486697] sock_close+0xc/0x10 [ 11.487145] __fput+0x277/0x780 [ 11.487632] task_work_run+0xeb/0x180 [ 11.488118] __prepare_exit_to_usermode+0x15a/0x160 [ 11.488834] do_syscall_64+0x4a/0x70 [ 11.489326] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Wei Wang fixed a part of these CDG-malloc issues with commit c1201444 ("tcp: memset ca_priv data to 0 properly"). This patch here fixes the listener-scenario: We make sure that listeners setting the congestion-control through setsockopt won't initialize it (thus CDG never allocates on listeners). For those who use AF_UNSPEC to reuse a socket, tcp_disconnect() is changed to cleanup afterwards. (The issue can be reproduced at least down to v4.4.x.) Cc: Wei Wang <weiwan@google.com> Cc: Eric Dumazet <edumazet@google.com> Fixes: 2b0a8c9e ("tcp: add CDG congestion control") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
Sean Tranchetti authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 1e82a62f ] A potential deadlock can occur during registering or unregistering a new generic netlink family between the main nl_table_lock and the cb_lock where each thread wants the lock held by the other, as demonstrated below. 1) Thread 1 is performing a netlink_bind() operation on a socket. As part of this call, it will call netlink_lock_table(), incrementing the nl_table_users count to 1. 2) Thread 2 is registering (or unregistering) a genl_family via the genl_(un)register_family() API. The cb_lock semaphore will be taken for writing. 3) Thread 1 will call genl_bind() as part of the bind operation to handle subscribing to GENL multicast groups at the request of the user. It will attempt to take the cb_lock semaphore for reading, but it will fail and be scheduled away, waiting for Thread 2 to finish the write. 4) Thread 2 will call netlink_table_grab() during the (un)registration call. However, as Thread 1 has incremented nl_table_users, it will not be able to proceed, and both threads will be stuck waiting for the other. genl_bind() is a noop, unless a genl_family implements the mcast_bind() function to handle setting up family-specific multicast operations. Since no one in-tree uses this functionality as Cong pointed out, simply removing the genl_bind() function will remove the possibility for deadlock, as there is no attempt by Thread 1 above to take the cb_lock semaphore. Fixes: c380d9a7 ("genetlink: pass multicast bind/unbind to families") Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Johannes Berg <johannes.berg@intel.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
-
Martin Varghese authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 394de110 ] The packets from tunnel devices (eg bareudp) may have only metadata in the dst pointer of skb. Hence a pointer check of neigh_lookup is needed in dst_neigh_lookup_skb Kernel crashes when packets from bareudp device is processed in the kernel neighbour subsytem. [ 133.384484] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 133.385240] #PF: supervisor instruction fetch in kernel mode [ 133.385828] #PF: error_code(0x0010) - not-present page [ 133.386603] PGD 0 P4D 0 [ 133.386875] Oops: 0010 [#1] SMP PTI [ 133.387275] CPU: 0 PID: 5045 Comm: ping Tainted: G W 5.8.0-rc2+ #15 [ 133.388052] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 133.391076] RIP: 0010:0x0 [ 133.392401] Code: Bad RIP value. [ 133.394029] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.396656] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.399018] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.399685] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.400350] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.401010] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.401667] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.402412] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.402948] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.403611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.404270] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.404933] Call Trace: [ 133.405169] <IRQ> [ 133.405367] __neigh_update+0x5a4/0x8f0 [ 133.405734] arp_process+0x294/0x820 [ 133.406076] ? __netif_receive_skb_core+0x866/0xe70 [ 133.406557] arp_rcv+0x129/0x1c0 [ 133.406882] __netif_receive_skb_one_core+0x95/0xb0 [ 133.407340] process_backlog+0xa7/0x150 [ 133.407705] net_rx_action+0x2af/0x420 [ 133.408457] __do_softirq+0xda/0x2a8 [ 133.408813] asm_call_on_stack+0x12/0x20 [ 133.409290] </IRQ> [ 133.409519] do_softirq_own_stack+0x39/0x50 [ 133.410036] do_softirq+0x50/0x60 [ 133.410401] __local_bh_enable_ip+0x50/0x60 [ 133.410871] ip_finish_output2+0x195/0x530 [ 133.411288] ip_output+0x72/0xf0 [ 133.411673] ? __ip_finish_output+0x1f0/0x1f0 [ 133.412122] ip_send_skb+0x15/0x40 [ 133.412471] raw_sendmsg+0x853/0xab0 [ 133.412855] ? insert_pfn+0xfe/0x270 [ 133.413827] ? vvar_fault+0xec/0x190 [ 133.414772] sock_sendmsg+0x57/0x80 [ 133.415685] __sys_sendto+0xdc/0x160 [ 133.416605] ? syscall_trace_enter+0x1d4/0x2b0 [ 133.417679] ? __audit_syscall_exit+0x1d9/0x280 [ 133.418753] ? __prepare_exit_to_usermode+0x5d/0x1a0 [ 133.419819] __x64_sys_sendto+0x24/0x30 [ 133.420848] do_syscall_64+0x4d/0x90 [ 133.421768] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 133.422833] RIP: 0033:0x7fe013689c03 [ 133.423749] Code: Bad RIP value. [ 133.424624] RSP: 002b:00007ffc7288f418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 133.425940] RAX: ffffffffffffffda RBX: 000056151fc63720 RCX: 00007fe013689c03 [ 133.427225] RDX: 0000000000000040 RSI: 000056151fc63720 RDI: 0000000000000003 [ 133.428481] RBP: 00007ffc72890b30 R08: 000056151fc60500 R09: 0000000000000010 [ 133.429757] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 133.431041] R13: 000056151fc636e0 R14: 000056151fc616bc R15: 0000000000000080 [ 133.432481] Modules linked in: mpls_iptunnel act_mirred act_tunnel_key cls_flower sch_ingress veth mpls_router ip_tunnel bareudp ip6_udp_tunnel udp_tunnel macsec udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc xt_MASQUERADE iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc ebtable_filter ebtables overlay ip6table_filter ip6_tables iptable_filter sunrpc ext4 mbcache jbd2 pcspkr i2c_piix4 virtio_balloon joydev ip_tables xfs libcrc32c ata_generic qxl pata_acpi drm_ttm_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ata_piix libata virtio_net net_failover virtio_console failover virtio_blk i2c_core virtio_pci virtio_ring serio_raw floppy virtio dm_mirror dm_region_hash dm_log dm_mod [ 133.444045] CR2: 0000000000000000 [ 133.445082] ---[ end trace f4aeee1958fd1638 ]--- [ 133.446236] RIP: 0010:0x0 [ 133.447180] Code: Bad RIP value. [ 133.448152] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.449363] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.450835] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.452237] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.453722] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.455149] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.456520] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.458046] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.459342] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.460782] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.462240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.463697] Kernel panic - not syncing: Fatal exception in interrupt [ 133.465226] Kernel Offset: 0xfa00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 133.467025] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: aaa0c23c ("Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug") Signed-off-by:
Martin Varghese <martin.varghese@nokia.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit a9b11101 ] syzbot was to trigger a bug by tricking AF_LLC with non sensible addr->sllc_arphrd It seems clear LLC requires an Ethernet device. Back in commit abf9d537 ("llc: add support for SO_BINDTODEVICE") Octavian Purdila added possibility for application to use a zero value for sllc_arphrd, convert it to ARPHRD_ETHER to not cause regressions on existing applications. BUG: KASAN: use-after-free in __read_once_size include/linux/compiler.h:199 [inline] BUG: KASAN: use-after-free in list_empty include/linux/list.h:268 [inline] BUG: KASAN: use-after-free in waitqueue_active include/linux/wait.h:126 [inline] BUG: KASAN: use-after-free in wq_has_sleeper include/linux/wait.h:160 [inline] BUG: KASAN: use-after-free in skwq_has_sleeper include/net/sock.h:2092 [inline] BUG: KASAN: use-after-free in sock_def_write_space+0x642/0x670 net/core/sock.c:2813 Read of size 8 at addr ffff88801e0b4078 by task ksoftirqd/3/27 CPU: 3 PID: 27 Comm: ksoftirqd/3 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 __read_once_size include/linux/compiler.h:199 [inline] list_empty include/linux/list.h:268 [inline] waitqueue_active include/linux/wait.h:126 [inline] wq_has_sleeper include/linux/wait.h:160 [inline] skwq_has_sleeper include/net/sock.h:2092 [inline] sock_def_write_space+0x642/0x670 net/core/sock.c:2813 sock_wfree+0x1e1/0x260 net/core/sock.c:1958 skb_release_head_state+0xeb/0x260 net/core/skbuff.c:652 skb_release_all+0x16/0x60 net/core/skbuff.c:663 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:838 [inline] consume_skb+0xfb/0x410 net/core/skbuff.c:832 __dev_kfree_skb_any+0xa4/0xd0 net/core/dev.c:2967 dev_kfree_skb_any include/linux/netdevice.h:3650 [inline] e1000_unmap_and_free_tx_resource.isra.0+0x21b/0x3a0 drivers/net/ethernet/intel/e1000/e1000_main.c:1963 e1000_clean_tx_irq drivers/net/ethernet/intel/e1000/e1000_main.c:3854 [inline] e1000_clean+0x4cc/0x1d10 drivers/net/ethernet/intel/e1000/e1000_main.c:3796 napi_poll net/core/dev.c:6532 [inline] net_rx_action+0x508/0x1120 net/core/dev.c:6600 __do_softirq+0x262/0x98c kernel/softirq.c:292 run_ksoftirqd kernel/softirq.c:603 [inline] run_ksoftirqd+0x8e/0x110 kernel/softirq.c:595 smpboot_thread_fn+0x6a3/0xa40 kernel/smpboot.c:165 kthread+0x361/0x430 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Allocated by task 8247: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:521 slab_post_alloc_hook mm/slab.h:584 [inline] slab_alloc mm/slab.c:3320 [inline] kmem_cache_alloc+0x121/0x710 mm/slab.c:3484 sock_alloc_inode+0x1c/0x1d0 net/socket.c:240 alloc_inode+0x68/0x1e0 fs/inode.c:230 new_inode_pseudo+0x19/0xf0 fs/inode.c:919 sock_alloc+0x41/0x270 net/socket.c:560 __sock_create+0xc2/0x730 net/socket.c:1384 sock_create net/socket.c:1471 [inline] __sys_socket+0x103/0x220 net/socket.c:1513 __do_sys_socket net/socket.c:1522 [inline] __se_sys_socket net/socket.c:1520 [inline] __ia32_sys_socket+0x73/0xb0 net/socket.c:1520 do_syscall_32_irqs_on arch/x86/entry/common.c:337 [inline] do_fast_syscall_32+0x27b/0xe16 arch/x86/entry/common.c:408 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 Freed by task 17: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kmem_cache_free+0x86/0x320 mm/slab.c:3694 sock_free_inode+0x20/0x30 net/socket.c:261 i_callback+0x44/0x80 fs/inode.c:219 __rcu_reclaim kernel/rcu/rcu.h:222 [inline] rcu_do_batch kernel/rcu/tree.c:2183 [inline] rcu_core+0x570/0x1540 kernel/rcu/tree.c:2408 rcu_core_si+0x9/0x10 kernel/rcu/tree.c:2417 __do_softirq+0x262/0x98c kernel/softirq.c:292 The buggy address belongs to the object at ffff88801e0b4000 which belongs to the cache sock_inode_cache of size 1152 The buggy address is located 120 bytes inside of 1152-byte region [ffff88801e0b4000, ffff88801e0b4480) The buggy address belongs to the page: page:ffffea0000782d00 refcount:1 mapcount:0 mapping:ffff88807aa59c40 index:0xffff88801e0b4ffd raw: 00fffe0000000200 ffffea00008e6c88 ffffea0000782d48 ffff88807aa59c40 raw: ffff88801e0b4ffd ffff88801e0b4000 0000000100000003 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88801e0b3f00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff88801e0b3f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88801e0b4000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88801e0b4080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801e0b4100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: abf9d537 ("llc: add support for SO_BINDTODEVICE") Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 27d53323 ] In the tx path of l2tp, l2tp_xmit_skb() calls skb_dst_set() to set skb's dst. However, it will eventually call inet6_csk_xmit() or ip_queue_xmit() where skb's dst will be overwritten by: skb_dst_set_noref(skb, dst); without releasing the old dst in skb. Then it causes dst/dev refcnt leak: unregister_netdevice: waiting for eth0 to become free. Usage count = 1 This can be reproduced by simply running: # modprobe l2tp_eth && modprobe l2tp_ip # sh ./tools/testing/selftests/net/l2tp.sh So before going to inet6_csk_xmit() or ip_queue_xmit(), skb's dst should be dropped. This patch is to fix it by removing skb_dst_set() from l2tp_xmit_skb() and moving skb_dst_drop() into l2tp_xmit_core(). Fixes: 3557baab ("[L2TP]: PPP over L2TP driver core") Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
James Chapman <jchapman@katalix.com> Tested-by:
-
