- 21 Dec, 2010 40 commits
-
-
Krishna Gudipati authored
- Made IOC auto_recovery synchronized and not timer based. - Only one PCI function will attempt to recover and reinitialize the ASIC on a failure, after all the active PCI fns acknowledge the IOC failure. Signed-off-by:
Krishna Gudipati <kgudipat@brocade.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
When the bfa driver is loaded a flogi is sent without the knowledge of trunking configuration. This normal flogi causes the switch ports which had trunking enabled to go to persistent offline. Solution is to store the port configuration (which has trunking info) in the flash for persistency. The firmware will read this configuration when the very first fcport enable is received. Signed-off-by:
-
Krishna Gudipati authored
- Move fw trace save logic to bfa_ioc_sm_fail_entry(), so that fw trace is saved irrespective of the cause of the failure. - Make bfa_ioc_sm_fail() a failure parking state. - Rename bfa_ioc_sm_initfail() to a more appropriate bfa_ioc_sm_fail_retry() as it is no longer a parking state. Signed-off-by:
-
Maggie Zhang authored
Remove unused functions and fix checkpatch errors. Misc cleanups in comment and formatting. Signed-off-by:
Maggie Zhang <xmzhang@brocade.com> Signed-off-by:
Jing Huang <huangj@brocade.com> Signed-off-by:
-
Maggie Zhang authored
Remove OS wrapper functions/macros, and as a result remove bfa_os_inc.h. Signed-off-by:
-
Maggie Zhang authored
Remove SCSI IO callbacks, and as a result remove bfa_cb_ioim.h. Signed-off-by:
-
Maggie Zhang authored
Modified scatter gather processing to use the kernel provided scsi_for_each_sg() macro. 1) Instead of allocating and setting up sgpg in bfa_ioim_sge_setup(), we only do allocation. As a result, we remove bfa_ioim_sgpg_setup() and rename bfa_ioim_sge_setup() to bfa_ioim_sgpg_alloc(). 2) bfa_ioim_send_ioreq() call scsi_for_each_sg() to handle both inline and sgpg setup. Signed-off-by:
-
Maggie Zhang authored
Removed bfa_drv.c, merged it to bfa_core.c and modified Makefile. Signed-off-by:
-
Maggie Zhang authored
Cleaned up one line functions. Signed-off-by:
-
Maggie Zhang authored
Removed unused and empty functions. Signed-off-by:
-
Robert Jennings authored
By changing field ordering we can avoid a couple of memory holes in the tables that use the ibmvfc_async_desc structure. Signed-off-by:
Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Stephen Hemminger authored
Since iscsi transport can be built as a module and uses netlink socket to communicate. The module should have an alias to autoload when socket of NETLINK_ISCSI type is requested. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Acked-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Christof Schmitt authored
The zfcpdump tool requires a method to attach exactly one LUN. The easiest way to achieve this is to add a new zfcp module parameter. When allow_lun_scan is set to "false", zfcp only accepts LUNs that have been configured through the unit_add sysfs interface. Reviewed-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
-
Christof Schmitt authored
The function zfcp_cache_hw_align is only called from zfcp_module_init, so it should be declared with __init as well. Reviewed-by:
Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by:
-
Christof Schmitt authored
Initialization of the qdio waitqueue should happen when the qdio data is initialized and the QDIOUP flag should be handled in the qdio code as well. Adjust the code accordingly and remove the superfluos function zfcp_erp_adapter_strategy_open_qdio. Reviewed-by:
-
Swen Schillig authored
This patch is the final cleanup of the redesign from the zfcp tracing. Structures and elements which were used by multiple areas of the former debug tracing are now changed to the new scheme. Signed-off-by:
-
Swen Schillig authored
This patch is the continuation to redesign the zfcp tracing to a more straight-forward and easy to extend scheme. This patch deals with all trace records of the zfcp SCSI area. Signed-off-by:
-
Swen Schillig authored
This patch is the continuation to redesign the zfcp tracing to a more straight-forward and easy to extend scheme. This patch deals with all trace records of the zfcp HBA area. Signed-off-by:
-
Swen Schillig authored
This patch is the continuation to redesign the zfcp tracing to a more straight-forward and easy to extend scheme. This patch deals with all trace records of the zfcp SAN area. Signed-off-by:
-
Swen Schillig authored
The tracing environment of the zfcp LLD has become very bulky and hard to maintain. Small changes involve a large modification process which is error-prone and not effective. This patch is the first of a set to redesign the zfcp tracing to a more straight-forward and easy to extend scheme. It removes all interpretation and visualization parts and focuses on bare logging of the information. This patch deals with all trace records of the zfcp error recovery. Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by:
Ravi Anand <ravi.anand@qlogic.com> Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
-
Lalit Chandivade authored
Signed-off-by:
Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by:
-
Prasanna Mumbai authored
Prior to firmware state change from ACQUIRING to READY, an 0x8029 AEN is received. Added code to check previous state being ACQUIRING in order to update the ip address in the driver. Signed-off-by:
Prasanna Mumbai <prasanna.mumbai@qlogic.com> Signed-off-by:
-
Lalit Chandivade authored
Since if fw load is failing, running on incomplete fw load would be fatal. Signed-off-by:
-
Lalit Chandivade authored
Signed-off-by:
-
Lalit Chandivade authored
in mailbox command do not process interrupt unconditionally, process interrupt only in polling mode Signed-off-by:
-
Karen Higgins authored
Signed-off-by:
Karen Higgins <karen.higgins@qlogic.com> Signed-off-by:
-
Swapnil Nagle authored
Signed-off-by:
Swapnil Nagle <swapnil.nagle@qlogic.com> Signed-off-by:
-
Shyam Sundar authored
IRQF_SHARED flag should not be set when calling request_irq for MSI since this interrupt mechanism cannot be shared like standard INTx Signed-off-by:
Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by:
-
Vikas Chaudhary authored
IRQF_DISABLE flag is deprecated and this flag is a NOOP in kernel. Signed-off-by:
-
Joe Eykholt authored
The statistics for InputMegabytes and OutputMegabytes are misnamed. They're accumulating bytes, not megabytes. The statistic returned via /sys must be in megabytes, however, which is what the HBA-API wants. The FCP code needs to accumulate it in bytes and then divide by 1,000,000 (not 2^20) before it presented via sysfs. This affects fcoe.ko only, not fnic. The fnic driver correctly by accumulating bytes and then converts to megabytes. I checked that libhbalinux is using the /sys file directly without conversion. BTW, qla2xxx does divide by 2^20, which I'm not fixing here. Signed-off-by:
Joe Eykholt <jeykholt@cisco.com> Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Joe Eykholt authored
Neaten several calls to fip_select() by having it return the pointer to the new FCF. Signed-off-by:
-
Joe Eykholt authored
When there are several FCFs to choose from, the one most likely to accept a FLOGI on certian switches is the one that last answered a multicast solicit. So, when receiving an advertisement, move the FCF to the front of the list so that it gets chosen first among those with the same priority. Without this, more FLOGIs need to be sent in a test with multiple FCFs and a switch in NPV mode, but it still eventually finds one that accepts the FLOGI. Signed-off-by:
-
Joe Eykholt authored
When multiple FCFs to the same fabric exist, the debug messages all look alike. Change the message to include the MAC address. Signed-off-by:
-
Joe Eykholt authored
Switches using multiple-FCFs may reject FLOGI in order to balance the load between multiple FCFs. Even though the FCF was available, it may have more load at the point we actually send the FLOGI. If the FLOGI fails, select a different FCF if possible, among those with the same priority. If no other FCF is available, just deliver the reject to libfc for retry. Signed-off-by:
-
Joe Eykholt authored
The check for conflicting fabrics in fcoe_ctlr_select() ignores any FCFs that aren't usable. This is a minor problem now but becomes more pronounced after later patches. Signed-off-by:
-
Joe Eykholt authored
Move some of the code in fcoe_ctlr_timer_work() to fcoe_ctlr_select() so that it can be shared with another function in a forthcoming patch. Signed-off-by:
-
Joe Eykholt authored
Move the announcement code to a separate function for reuse in a forthcoming patch. For messages regarding FCF timeout and selection, use the previously-announced FCF MAC address (dest_addr) in the fcoe_ctlr struct. Only print (announce) the FCF if it is new. Print MAC for timed-out or deselected FCFs. Signed-off-by:
-
