- 01 Apr, 2018 16 commits
-
-
Jon Maloy authored
The function tipc_nametbl_translate() function is ugly and hard to follow. This can be improved somewhat by introducing a stack variable for holding the publication list to be used and re-ordering the if- clauses for selection of algorithm. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
The current design of the binding table has an unnecessary memory consuming and complex data structure. It aggregates the service range items into an array, which is expanded by a factor two every time it becomes too small to hold a new item. Furthermore, the arrays never shrink when the number of ranges diminishes. We now replace this array with an RB tree that is holding the range items as tree nodes, each range directly holding a list of bindings. This, along with a few name changes, improves both readability and volume of the code, as well as reducing memory consumption and hopefully improving cache hit rate. Signed-off-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: bridge: MTU handling changes As previously discussed the recent changes break some setups and could lead to packet drops. Thus the first patch reverts the behaviour for the bridge to follow the minimum MTU but also keeps the ability to set the MTU to the maximum (out of all ports) if vlan filtering is enabled. Patch 02 is the bigger change in behaviour - we've always had trouble when configuring bridges and their MTU which is auto tuning on port events (add/del/changemtu), which means config software needs to chase it and fix it after each such event, after patch 02 we allow the user to configure any MTU (ETH_MIN/MAX limited) but once that is done the bridge stops auto tuning and relies on the user to keep the MTU correct. This should be compatible with cases that don't touch the MTU (or set it to the same value), while allowing to configure the MTU and not worry about it changing afterwards. The patches are intentionally split like this, so that if they get accepted and there are any complaints patch 02 can be reverted. ==================== Signed-off-by: -
Nikolay Aleksandrov authored
As Roopa noted today the biggest source of problems when configuring bridge and ports is that the bridge MTU keeps changing automatically on port events (add/del/changemtu). That leads to inconsistent behaviour and network config software needs to chase the MTU and fix it on each such event. Let's improve on that situation and allow for the user to set any MTU within ETH_MIN/MAX limits, but once manually configured it is the user's responsibility to keep it correct afterwards. In case the MTU isn't manually set - the behaviour reverts to the previous and the bridge follows the minimum MTU. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Recently the bridge was changed to automatically set maximum MTU on port events (add/del/changemtu) when vlan filtering is enabled, but that actually changes behaviour in a way which breaks some setups and can lead to packet drops. In order to still allow that maximum to be set while being compatible, we add the ability for the user to tune the bridge MTU up to the maximum when vlan filtering is enabled, but that has to be done explicitly and all port events (add/del/changemtu) lead to resetting that MTU to the minimum as before. Suggested-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Vadim Lomovtsev says: ==================== net: thunderx: implement DMAC filtering support By default CN88XX BGX accepts all incoming multicast and broadcast packets and filtering is disabled. The nic driver doesn't provide an ability to change such behaviour. This series is to implement DMAC filtering management for CN88XX nic driver allowing user to enable/disable filtering and configure specific MAC addresses to filter traffic. Changes from v1: build issues: - update code in order to address compiler warnings; checkpatch.pl reported issues: - update code in order to fit 80 symbols length; - update commit descriptions in order to fit 80 symbols length; ==================== Signed-off-by: -
Vadim Lomovtsev authored
The ndo_set_rx_mode() is called from atomic context which causes messages response timeouts while VF to PF communication via MSIx. To get rid of that we're copy passed mc list, parse flags and queue handling of kernel request to ordered workqueue. Signed-off-by:
Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by:
-
Vadim Lomovtsev authored
The kernel calls ndo_set_rx_mode() callback from atomic context which causes messaging timeouts between VF and PF (as they’re implemented via MSIx). So in order to handle ndo_set_rx_mode() we need to get rid of it. This commit implements necessary workqueue related structures to let VF queue kernel request processing in non-atomic context later. Signed-off-by:
-
Vadim Lomovtsev authored
This commit is to add message handling for ndo_set_rx_mode() callback at PF side. Signed-off-by:
-
Vadim Lomovtsev authored
The kernel calls ndo_set_rx_mode() callback supplying it will all necessary info, such as device state flags, multicast mac addresses list and so on. Since we have only 128 bits to communicate with PF we need to initiate several requests to PF with small/short operation each based on input data. So this commit implements following PF messages codes along with new data structures for them: NIC_MBOX_MSG_RESET_XCAST to flush all filters configured for this particular network interface (VF) NIC_MBOX_MSG_ADD_MCAST to add new MAC address to DMAC filter registers for this particular network interface (VF) NIC_MBOX_MSG_SET_XCAST to apply filtering configuration to filter control register Signed-off-by: -
Vadim Lomovtsev authored
The ThunderX NIC could be partitioned to up to 128 VFs and thus represented to system. Each VF is mapped to pair BGX:LMAC, and each of VF is configured by kernel individually. Eventually the bunch of VFs could be mapped onto same pair BGX:LMAC and thus could cause several multicast filtering configuration requests to LMAC with the same MAC addresses. This commit is to add ThunderX NIC BGX filtering manipulation routines. Signed-off-by:
-
Vadim Lomovtsev authored
The ThunderX NIC has two Ethernet Interfaces (BGX) each of them could has up to four Logical MACs configured. Each of BGX has 32 filters to be configured for filtering ingress packets. The number of filters available to particular LMAC is from 8 (if we have four LMACs configured per BGX) up to 32 (in case of only one LMAC is configured per BGX). At the same time the NIC could present up to 128 VFs to OS as network interfaces, each of them kernel will configure with set of MAC addresses for filtering. So to prevent dupes in BGX filter registers from different network interfaces it is required to cache and track all filter configuration requests prior to applying them onto BGX filter registers. This commit is to update LMAC structures with control fields to allocate/releasing filters tracking list along with implementing dmac array allocate/release per LMAC. Signed-off-by:
-
Vadim Lomovtsev authored
The ThunderX NIC has set of registers which allows to configure filter policy for ingress packets. There are three possible regimes of filtering multicasts, broadcasts and unicasts: accept all, reject all and accept filter allowed only. Current implementation has enum with all of them and two generic macro for enabling filtering et all (CAM_ACCEPT) and enabling/disabling broadcast packets, which also should be corrected in order to represent register bits properly. All these values are private for driver and there is no need to ‘publish’ them via header file. This commit is to move filtering register manipulation values from header file into source with explicit assignment of exact register values to them to be used while register configuring. Signed-off-by:
-
David S. Miller authored
Martin Blumenstingl says: ==================== Meson8m2 support for dwmac-meson8b The Meson8m2 SoC is an updated version of the Meson8 SoC. Some of the peripherals are shared with Meson8b (for example the watchdog registers and the internal temperature sensor calibration procedure). Meson8m2 also seems to include the same Gigabit MAC register layout as Meson8b. The registers in the Amlogic dwmac "glue" seem identical between Meson8b and Meson8m2. Manual testing seems to confirm this. To be extra-safe a new compatible string is added because there's no (public) documentation on the Meson8m2 SoC. This will allow us to implement any SoC-specific variations later on (if needed). ==================== Signed-off-by: -
Martin Blumenstingl authored
The Meson8m2 SoC uses a similar (potentially even identical) register layout as the Meson8b and GXBB SoCs for the dwmac glue. Add a new compatible string and update the module description to indicate support for these SoCs. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Martin Blumenstingl authored
The Meson8m2 SoC uses a similar (potentially even identical) register layout for the dwmac glue as Meson8b and GXBB. Unfortunately there is no documentation available. Testing shows that both, RMII and RGMII PHYs are working if they are configured as on Meson8b. Add a new compatible string to the documentation so differences (if there are any) between Meson8m2 and the other SoCs can be taken care of within the driver. Signed-off-by:
-
- 30 Mar, 2018 24 commits
-
-
Lucas Bates authored
When using the -i feature to generate random ID numbers for test cases in tdc, the function that writes the JSON to file doesn't add a newline character to the end of the file, so we have to add our own. Signed-off-by:
Lucas Bates <lucasb@mojatatu.com> Signed-off-by:
-
Raghu Vatsavayi authored
This commit has fix for RX traffic issues when we stress test the driver with continuous ifconfig up/down under very high traffic conditions. Reason for the issue is that, in existing liquidio_stop function NAPI is disabled even before actual FW/HW interface is brought down via send_rx_ctrl_cmd(lio, 0). Between time frame of NAPI disable and actual interface down in firmware, firmware continuously enqueues rx traffic to host. When interrupt happens for new packets, host irq handler fails in scheduling NAPI as the NAPI is already disabled. After "ifconfig <iface> up", Host re-enables NAPI but cannot schedule it until it receives another Rx interrupt. Host never receives Rx interrupt as it never cleared the Rx interrupt it received during interface down operation. NIC Rx interrupt gets cleared only when Host processes queue and clears the queue counts. Above anomaly leads to other issues like packet overflow in FW/HW queues, backpressure. Fix: This commit fixes this issue by disabling NAPI only after informing firmware to stop queueing packets to host via send_rx_ctrl_cmd(lio, 0). send_rx_ctrl_cmd is not visible in the patch as it is already there in the code. The DOWN command also waits for any pending packets to be processed by NAPI so that the deadlock will not occur. Signed-off-by:
Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Acked-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'ieee802154-for-davem-2018-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next Stefan Schmidt says: ==================== pull-request: ieee802154-next 2018-03-29 An update from ieee802154 for *net-next* Colin fixed a unused variable in the new mcr20a driver. Harry fixed an unitialised data read in the debugfs interface of the ca8210 driver. If there are any issues or you think these are to late for -rc1 (both can also go into -rc2 as they are simple fixes) let me know. ==================== Signed-off-by:
-
Roman Mashak authored
Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
-
Claudiu Manoil authored
The freescale.com address will no longer be available. Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
Biju Das authored
Add a new compatible string for the RZ/G1C (R8A77470) SoC. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
David S. Miller authored
Jose Abreu says: ==================== Fix TX Timeout and implement Safety Features Fix the TX Timeout handler to correctly reconfigure the whole system and start implementing features for DWMAC5 cores, specifically the Safety Features. Changes since v1: - Display error stats in ethtool ==================== Signed-off-by: -
Jose Abreu authored
This adds initial suport for DWMAC5 and implements the Automotive Safety Package which is available from core version 5.10. The Automotive Safety Pacakge (also called Safety Features) offers us with error protection in the core by implementing ECC Protection in memories, on-chip data path parity protection, FSM parity and timeout protection and Application/CSR interface timeout protection. In case of an uncorrectable error we call stmmac_global_err() and reconfigure the whole core. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Jose Abreu authored
Currently TX Timeout handler does not behaves as expected and leads to an unrecoverable state. Rework current implementation of TX Timeout handling to actually perform a complete reset of the driver state and IP. We use deferred work to init a task which will be responsible for resetting the system. Signed-off-by:
-
Jisheng Zhang authored
The style of the rx/tx queue's *_coal member assignment is: static void foo_coal_set(...) { set the coal in hw; update queue's foo_coal member; [1] } In other place, we call foo_coal_set(pp, queue->foo_coal), so the above [1] is duplicated and could be removed. Signed-off-by:Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
-
David S. Miller authored
Lorenzo Bianconi says: ==================== do not allow adding routes if disable_ipv6 is enabled Do not allow userspace to add static ipv6 routes if disable_ipv6 is enabled. Update disable_ipv6 documentation according to that change Changes since v1: - added an extack message telling the user that IPv6 is disabled on the nexthop device - rebased on-top of net-next ==================== Signed-off-by: -
Lorenzo Bianconi authored
Clarify that when disable_ipv6 is enabled even the ipv6 routes are deleted for the selected interface and from now it will not be possible to add addresses/routes to that interface Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Lorenzo Bianconi authored
Do not allow setting ipv6 routes from userspace if disable_ipv6 has been enabled. The issue can be triggered using the following reproducer: - sysctl net.ipv6.conf.all.disable_ipv6=1 - ip -6 route add a:b:c:d::/64 dev em1 - ip -6 route show a:b:c:d::/64 dev em1 metric 1024 pref medium Fix it checking disable_ipv6 value in ip6_route_info_create routine Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree. This batch comes with more input sanitization for xtables to address bug reports from fuzzers, preparation works to the flowtable infrastructure and assorted updates. In no particular order, they are: 1) Make sure userspace provides a valid standard target verdict, from Florian Westphal. 2) Sanitize error target size, also from Florian. 3) Validate that last rule in basechain matches underflow/policy since userspace assumes this when decoding the ruleset blob that comes from the kernel, from Florian. 4) Consolidate hook entry checks through xt_check_table_hooks(), patch from Florian. 5) Cap ruleset allocations at 512 mbytes, 134217728 rules and reject very large compat offset arrays, so we have a reasonable upper limit and fuzzers don't exercise the oom-killer. Patches from Florian. 6) Several WARN_ON checks on xtables mutex helper, from Florian. 7) xt_rateest now has a hashtable per net, from Cong Wang. 8) Consolidate counter allocation in xt_counters_alloc(), from Florian. 9) Earlier xt_table_unlock() call in {ip,ip6,arp,eb}tables, patch from Xin Long. 10) Set FLOW_OFFLOAD_DIR_* to IP_CT_DIR_* definitions, patch from Felix Fietkau. 11) Consolidate code through flow_offload_fill_dir(), also from Felix. 12) Inline ip6_dst_mtu_forward() just like ip_dst_mtu_maybe_forward() to remove a dependency with flowtable and ipv6.ko, from Felix. 13) Cache mtu size in flow_offload_tuple object, this is safe for forwarding as f87c10a8 describes, from Felix. 14) Rename nf_flow_table.c to nf_flow_table_core.o, to simplify too modular infrastructure, from Felix. 15) Add rt0, rt2 and rt4 IPv6 routing extension support, patch from Ahmed Abdelsalam. 16) Remove unused parameter in nf_conncount_count(), from Yi-Hung Wei. 17) Support for counting only to nf_conncount infrastructure, patch from Yi-Hung Wei. 18) Add strict NFT_CT_{SRC_IP,DST_IP,SRC_IP6,DST_IP6} key datatypes to nft_ct. 19) Use boolean as return value from ipt_ah and from IPVS too, patch from Gustavo A. R. Silva. 20) Remove useless parameters in nfnl_acct_overquota() and nf_conntrack_broadcast_help(), from Taehee Yoo. 21) Use ipv6_addr_is_multicast() from xt_cluster, also from Taehee Yoo. 22) Statify nf_tables_obj_lookup_byhandle, patch from Fengguang Wu. 23) Fix typo in xt_limit, from Geert Uytterhoeven. 24) Do no use VLAs in Netfilter code, again from Gustavo. 25) Use ADD_COUNTER from ebtables, from Taehee Yoo. 26) Bitshift support for CONNMARK and MARK targets, from Jack Ma. 27) Use pr_*() and add pr_fmt(), from Arushi Singhal. 28) Add synproxy support to ctnetlink. 29) ICMP type and IGMP matching support for ebtables, patches from Matthias Schiffer. 30) Support for the revision infrastructure to ebtables, from Bernie Harris. 31) String match support for ebtables, also from Bernie. 32) Documentation for the new flowtable infrastructure. 33) Use generic comparison functions in ebt_stp, from Joe Perches. 34) Demodularize filter chains in nftables. 35) Register conntrack hooks in case nftables NAT chain is added. 36) Merge assignments with return in a couple of spots in the Netfilter codebase, also from Arushi. 37) Document that xtables percpu counters are stored in the same memory area, from Ben Hutchings. 38) Revert mark_source_chains() sanity checks that break existing rulesets, from Florian Westphal. 39) Use is_zero_ether_addr() in the ipset codebase, from Joe Perches. ==================== Signed-off-by: -
David S. Miller authored
Kirill Tkhai says: ==================== Close race between {un, }register_netdevice_notifier and pernet_operations the problem is {,un}register_netdevice_notifier() do not take pernet_ops_rwsem, and they don't see network namespaces, being initialized in setup_net() and cleanup_net(), since at this time net is not hashed to net_namespace_list. This may lead to imbalance, when a notifier is called at time of setup_net()/net is alive, but it's not called at time of cleanup_net(), for the devices, hashed to the net, and vise versa. See (3/3) for the scheme of imbalance. This patchset fixes the problem by acquiring pernet_ops_rwsem at the time of {,un}register_netdevice_notifier() (3/3). (1-2/3) are preparations in xfrm and netfilter subsystems. The problem was introduced a long ago, but backporting won't be easy, since every previous kernel version may have changes in netdevice notifiers, and they all need review and testing. Otherwise, there may be more pernet_operations, which register or unregister netdevice notifiers, and that leads to deadlock (which is was fixed in 1-2/3). This patchset is for net-next. ==================== Signed-off-by: -
Kirill Tkhai authored
{un,}register_netdevice_notifier() iterate over all net namespaces hashed to net_namespace_list. But pernet_operations register and unregister netdevices in unhashed net namespace, and they are not seen for netdevice notifiers. This results in asymmetry: 1)Race with register_netdevice_notifier() pernet_operations::init(net) ... register_netdevice() ... call_netdevice_notifiers() ... ... nb is not called ... ... register_netdevice_notifier(nb) -> net skipped ... ... list_add_tail(&net->list, ..) ... Then, userspace stops using net, and it's destructed: pernet_operations::exit(net) unregister_netdevice() call_netdevice_notifiers() ... nb is called ... This always happens with net::loopback_dev, but it may be not the only device. 2)Race with unregister_netdevice_notifier() pernet_operations::init(net) register_netdevice() call_netdevice_notifiers() ... nb is called ... Then, userspace stops using net, and it's destructed: list_del_rcu(&net->list) ... pernet_operations::exit(net) unregister_netdevice_notifier(nb) -> net skipped dev_change_net_namespace() ... call_netdevice_notifiers() ... nb is not called ... unregister_netdevice() call_netdevice_notifiers() ... nb is not called ... This race is more danger, since dev_change_net_namespace() moves real network devices, which use not trivial netdevice notifiers, and if this will happen, the system will be left in unpredictable state. The patch closes the race. During the testing I found two places, where register_netdevice_notifier() is called from pernet init/exit methods (which led to deadlock) and fixed them (see previous patches). The review moved me to one more unusual registration place: raw_init() (can driver). It may be a reason of problems, if someone creates in-kernel CAN_RAW sockets, since they will be destroyed in exit method and raw_release() will call unregister_netdevice_notifier(). But grep over kernel tree does not show, someone creates such sockets from kernel space. Theoretically, there can be more places like this, and which are hidden from review, but we found them on the first bumping there (since there is no a race, it will be 100% reproducible). Signed-off-by:Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
Kirill Tkhai authored
Register netdevice notifier for every iptable entry is not good, since this breaks modularity, and the hidden synchronization is based on rtnl_lock(). This patch reworks the synchronization via new lock, while the rest of logic remains as it was before. This is required for the next patch. Tested via: while :; do unshare -n iptables -t mangle -A OUTPUT -j TEE --gateway 1.1.1.2 --oif lo; done Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Kirill Tkhai authored
Currently, driver registers it from pernet_operations::init method, and this breaks modularity, because initialization of net namespace and netdevice notifiers are orthogonal actions. We don't have per-namespace netdevice notifiers; all of them are global for all devices in all namespaces. Signed-off-by:
-
David S. Miller authored
Mike Looijmans says: ==================== of_net: Implement of_get_nvmem_mac_address helper Posted this as a small set now, with an (optional) second patch that shows how the changes work and what I've used to test the code on a Topic Miami board. I've taken the liberty to add appropriate "Acked" and "Review" tags. v4: Replaced "6" with ETH_ALEN v3: Add patch that implements mac in nvmem for the Cadence MACB controller Remove the integrated of_get_mac_address call v2: Use of_nvmem_cell_get to avoid needing the assiciated device Use void* instead of char* Add devicetree binding doc ==================== Signed-off-by: -
Mike Looijmans authored
Call of_get_nvmem_mac_address() to fetch the MAC address from an nvmem cell, if one is provided in the device tree. This allows the address to be stored in an I2C EEPROM device for example. Signed-off-by:
Mike Looijmans <mike.looijmans@topic.nl> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Mike Looijmans authored
It's common practice to store MAC addresses for network interfaces into nvmem devices. However the code to actually do this in the kernel lacks, so this patch adds of_get_nvmem_mac_address() for drivers to obtain the address from an nvmem cell provider. This is particulary useful on devices where the ethernet interface cannot be configured by the bootloader, for example because it's in an FPGA. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: flower: handle MTU changes This set improves MTU handling for flower offload. The max MTU is correctly capped and physical port MTU is communicated to the FW (and indirectly HW). ==================== Signed-off-by: -
John Hurley authored
Trigger a port mod message to request an MTU change on the NIC when any physical port representor is assigned a new MTU value. The driver waits 10 msec for an ack that the FW has set the MTU. If no ack is received the request is rejected and an appropriate warning flagged. Rather than maintain an MTU queue per repr, one is maintained per app. Because the MTU ndo is protected by the rtnl lock, there can never be contention here. Portmod messages from the NIC are also protected by rtnl so we first check if the portmod is an ack and, if so, handle outside rtnl and the cmsg work queue. Acks are detected by the marking of a bit in a portmod response. They are then verfied by checking the port number and MTU value expected by the app. If the expected MTU is 0 then no acks are currently expected. Also, ensure that the packet headroom reserved by the flower firmware is considered when accepting an MTU change on any repr. Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
John Hurley authored
Rename the 'change_mtu' app callback to 'check_mtu'. This is called whenever an MTU change is requested on a netdev. It can reject the change but is not responsible for implementing it. Introduce a new 'repr_change_mtu' app callback that is hit when the MTU of a repr is to be changed. This is responsible for performing the MTU change and verifying it. Signed-off-by:
-
