- 29 Mar, 2021 40 commits
-
-
Bhaskar Chowdhury authored
Trivial spelling fixes throughout the file. Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210314220436.3417083-1-unixbhaskar@gmail.com
-
Christophe Leroy authored
Commit 6ec4476a ("Raise gcc version requirement to 4.9") made it impossible to build with gcc 4.8 and under. Remove related workaround. Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Christophe Leroy authored
Move all KUAP management in C. Signed-off-by:
-
Christophe Leroy authored
In preparation of porting PPC32 to C syscall entry/exit, create C version of kuap_save_and_lock() and kuap_user_restore() and kuap_kernel_restore() and kuap_assert_locked() and kuap_get_and_assert_locked() on 8xx. Signed-off-by:
-
Christophe Leroy authored
In preparation of porting PPC32 to C syscall entry/exit, create C version of kuap_save_and_lock() and kuap_user_restore() and kuap_kernel_restore() and kuap_assert_locked() and kuap_get_and_assert_locked() on book3s/32. Signed-off-by:
-
Christophe Leroy authored
In preparation of porting powerpc32 to C syscall entry/exit, rename kuap_check_amr() and kuap_get_and_check_amr() as kuap_assert_locked() and kuap_get_and_assert_locked(), and move in the generic asm/kup.h the stub for when CONFIG_PPC_KUAP is not selected. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Christophe Leroy authored
This can be done in C, do it. Unrolling the loop gains approx. 15% performance. From now on, prepare_transfer_to_handler() is only for interrupts from kernel. Signed-off-by:
-
Christophe Leroy authored
Only book3s/32 and e500 have significative work to do in prepare_transfer_to_handler. Other 32 bit have nothing to do at all. Signed-off-by:
-
Christophe Leroy authored
transfer_to_handler_cont: is now just a blr. Directly perform blr in power_save_ppc32_restore(). Also remove useless setting of r11 in e500 version of power_save_ppc32_restore(). Signed-off-by:
-
Christophe Leroy authored
Save non volatile registers, XER, CTR, MSR and NIP in exception prolog. Also assign proper value to r2 and r3 there. For now, recalculate thread pointer in prepare_transfer_to_handler. It will disappear once KUAP is ported to C. And remove the comment which is now completely wrong. Signed-off-by:
-
Christophe Leroy authored
Exception prologs all do the same at the end: - Save trapno in stack - Mark stack with exception marker - Save r0 - Save r3 to r8 Refactor that into a COMMON_EXCEPTION_PROLOG_END macro. At the same time use r1 instead of r11. Signed-off-by:
-
Christophe Leroy authored
The xfer parameter is not used anymore, remove it. Signed-off-by:
-
Christophe Leroy authored
In order to get more control in exception prolog, dismantle all non standard exception macros, finishing with EXC_XFER_STD and EXC_XFER_LITE and EXC_XFER_TEMPLATE. Also remove transfer_to_handler_full and ret_from_except and ret_from_except_full as they are not used anymore. Last parameter of EXCEPTION() is now ignored, will be removed in a later patch to avoid too much churn. Signed-off-by:
-
Christophe Leroy authored
Until now, non volatile registers were restored everytime they were saved, ie using EXC_XFER_STD meant saving and restoring them while EXC_XFER_LITE meant neither saving not restoring them. Now that they are always saved, EXC_XFER_STD means to restore them and EXC_XFER_LITE means to not restore them. Most of the users of EXC_XFER_STD only need to retrieve the non volatile registers. For them there is no need to restore the non volatile registers as they have not been modified. Only very few exceptions require non volatile registers restore. Opencode the few places which require saving of non volatile registers. Signed-off-by:
-
Christophe Leroy authored
In order to increase flexibility, add a macro that will for now call transfer_to_handler. As transfer_to_handler doesn't do the actual transfer anymore, also name it prepare_transfer_to_handler. The following patches will progressively remove the use of transfer_to_handler label. Signed-off-by:
-
Christophe Leroy authored
Saving the trap number into the stack goes into the exception prolog, as EXC_XFER_xxx will soon disappear. Signed-off-by:
-
Christophe Leroy authored
Now that non volatile registers are saved at all time, no need to split bad_page_fault() out of do_page_fault(). Remove handle_page_fault() and use do_page_fault() directly. Signed-off-by:
-
Christophe Leroy authored
All exception handlers take regs as first parameter. Instead of setting r3 just before each call to a handler, set it in transfer_to_handler. Signed-off-by:
-
Christophe Leroy authored
Since commit 06d67d54 ("powerpc: make process.c suitable for both 32-bit and 64-bit"), thread.regs is set on task creation, no need to set it again and again at each interrupt entry as it never change. Suggested-by:
-
Christophe Leroy authored
This patch replaces the PPC32 ASM exception exit by C exception exit. Signed-off-by:
-
Christophe Leroy authored
In preparation of handling exception entry and exit in C, in order to simplify the handling, always save non volatile registers when entering an exception. Signed-off-by:
-
Christophe Leroy authored
Now that the MMU is re-enabled before calling the transfer function, we don't need anymore that hack with the address of the handler and the return function sitting just after the 'bl' to the transfer fonction, that function is retrieving via a read relative to 'lr'. Do a regular call to the transfer function, then to the handler, then branch to the return function. Signed-off-by:
-
Christophe Leroy authored
Refactor booke critical registers saving into a few macros and move it into the exception prolog directly. Keep the dedicated transfert_to_handler entry point for the moment allthough they are empty. They will be removed in a later patch to reduce churn. Signed-off-by:
-
Christophe Leroy authored
Now that the prolog continuation is separated in .text, give it a name and mark it _ASM_NOKPROBE_SYMBOL. Signed-off-by:
-
Christophe Leroy authored
The space in the head section is rather constrained by the fact that exception vectors are spread every 0x100 bytes and sometimes we need to have "out of line" code because it doesn't fit. Now that we are enabling MMU early in the prolog, take that opportunity to jump somewhere else in the .text section where we don't have any space constraint. Signed-off-by:
-
Christophe Leroy authored
Everywhere where it is possible, use START_EXCEPTION(). This will help for proper exception init in future patches. Signed-off-by:
-
Christophe Leroy authored
For consistency, add in the macro the label used by exception prolog to branch to stack overflow processing. While at it, enclose the macro in #ifdef CONFIG_VMAP_STACK on the 8xx as already done on book3s/32. Signed-off-by:
-
Christophe Leroy authored
The check of the emergency context initialisation in vmap_stack_overflow is buggy for the SMP case, as it compares r1 with 0 while in the SMP case r1 is offseted by the CPU id. Instead of fixing it, just perform static initialisation of the first emergency context. Signed-off-by:
-
Christophe Leroy authored
On 40x and 8xx, kernel text is pinned. On book3s/32, kernel text is mapped by BATs. Enable instruction translation at the same time as data translation, it makes things simpler. In syscall handler, MSR_RI can also be set at the same time because srr0/srr1 are already saved and r1 is set properly. On booke, translation is always on, so at the end all PPC32 have translation on early. Just update msr. Also update comment in power_save_ppc32_restore(). Signed-off-by:
-
Christophe Leroy authored
8xx requires to tag the DAR with a magic value in order to fixup DAR on faults generated by 'dcbX', as the 8xx forgets to update the DAR for those faults. Do the tagging as early as possible, that is before enabling MMU. Signed-off-by:
-
Christophe Leroy authored
If the code can use a stack in vm area, it can also use a stack in linear space. Simplify code by removing old non VMAP stack code on PPC32. That means the data translation is now re-enabled early in exception prolog in all cases, not only when using VMAP stacks. While we are touching EXCEPTION_PROLOG macros, remove the unused for_rtas parameter in EXCEPTION_PROLOG_1. Signed-off-by:
-
Christophe Leroy authored
ksp_limit is there to help detect stack overflows. That is specific to ppc32 as it was removed from ppc64 in commit cbc9565e ("powerpc: Remove ksp_limit on ppc64"). There are other means for detecting stack overflows. As ppc64 has proven to not need it, ppc32 should be able to do without it too. Lets remove it and simplify exception handling. Signed-off-by:
-
Christophe Leroy authored
8xx has registers SPRN_NRI, SPRN_EID and SPRN_EIE for changing MSR EE and RI. Use SPRN_EID in exception prolog to set RI. On an 8xx, it reduces the null_syscall test by 3 cycles. Signed-off-by:
-
Christophe Leroy authored
The handling of SPRN_DBCR0 and other registers can easily be done in C instead of ASM. Signed-off-by:
-
Christophe Leroy authored
There is no need for this to be in asm, use the new interrupt entry wrapper. Signed-off-by:
-
Christophe Leroy authored
There is no need for this to be in asm anymore, use the new interrupt entry wrapper. Signed-off-by:
-
Christophe Leroy authored
Ensure normal exception handler are able to manage stuff with MMU enabled. For that we use CONFIG_VMAP_STACK related code allthough there is no intention to really activate CONFIG_VMAP_STACK on powerpc 40x for the moment. 40x uses SPRN_DEAR instead of SPRN_DAR and SPRN_ESR instead of SPRN_DSISR. Take it into account in common macros. 40x MSR value doesn't fit on 15 bits, use LOAD_REG_IMMEDIATE() in common macros that will be used also with 40x. Signed-off-by:
-
Christophe Leroy authored
In order the enable MMU early in exception prolog, implement CONFIG_VMAP_STACK principles in critical exception prolog. There is no intention to use CONFIG_VMAP_STACK on 40x, but related code will be used to enable MMU early in exception in a later patch. Also address (critirq_ctx - PAGE_OFFSET) directly instead of using tophys() in order to win one instruction. Signed-off-by:
-
Christophe Leroy authored
In order to ease preparation for CONFIG_VMAP_STACK, reorder a few instruction, especially save r1 into stack frame earlier. Signed-off-by:
-
Christophe Leroy authored
In order to be able to switch MMU on in exception prolog, save SRR0 and SRR1 earlier. Also save r10 and r11 into stack earlier to better match with the normal exception prolog. Signed-off-by:
-
