- 26 Sep, 2013 22 commits
-
-
Manjunath Goudar authored
Separate the Samsung OHCI S3C24xx/S3C64xx host controller driver from ohci-hcd host code so that it can be built as a separate driver module.This work is part of enabling multi-platform. Signed-off-by:
Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by:
Deepak Saxena <dsaxena@linaro.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Reviewed-by:
Tomasz Figa <t.figa@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Manjunath Goudar authored
Separate the TI OHCI Atmel host controller driver from ohci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Manjunath Goudar authored
Separate the ST OHCI SPEAr host controller driver from ohci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM. Signed-off-by:
-
Manjunath Goudar authored
Separate the TI OHCI OMAP3 host controller driver from ohci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM. Signed-off-by:
-
Manjunath Goudar authored
Separate the TI OHCI OMAP1/2 host controller driver from ohci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM. Signed-off-by:
-
Manjunath Goudar authored
Separate the Samsung OHCI EXYNOS host controller driver from ohci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Cc: Vivek Gautam <gautam.vivek@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Manjunath Goudar authored
Separate the W90X900(W90P910) on-chip host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before W90X900(W90P910) can be booted with a multi-platform kernel and an ehci driver that only works on one of them. With the infrastructure added by Alan Stern in patch 3e023203 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the w90X900 bus glue. This patch is rebased on greghk/usb-next 3.12 rc1. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Wan ZongShun <mcuos.com@gmail.com> Acked-by:
-
Paul Chavent authored
The DCD pin of the serial port can receive a PPS signal. By calling the port line discipline dcd handle, this patch allow to monitor PPS through USB serial devices. However the performance aren't as good as the uart drivers, so document this point too. Signed-off-by:
Paul Chavent <paul.chavent@onera.fr> Acked-by:
Rodolfo Giometti <giometti@enneenne.com> Signed-off-by:
-
Paul Chavent authored
When the device receive a DCD status change, forward the signal to the USB serial system. This way, we can detect, for instance, PPS pulses. Signed-off-by:
-
Bjorn Helgaas authored
usb_disconnect() no longer acquires usb_bus_list_lock, so update its comment to that effect. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Alan Stern authored
This patch straightens out some locking issues in the USB sysfs interface: Deauthorization will destroy existing configurations. Attributes that read from udev->actconfig need to lock the device to prevent races. Likewise for the rawdescriptor values. Attributes that access an interface's current alternate setting should use ACCESS_ONCE() to obtain the cur_altsetting pointer, to protect against concurrent altsetting changes. The supports_autosuspend() attribute routine accesses values from an interface's driver, so it should lock the interface (rather than the usb_device) to protect against concurrent unbinds. Once this is done, the routine can be simplified considerably. Scalar values that are stored directly in the usb_device structure are always available. They do not require any locking. The same is true of the cached interface string descriptor, because it is not deallocated until the usb_host_interface structure is destroyed. Signed-off-by:
-
Huang Rui authored
When transfer type is isochronous, the other bits (bits 5..2) of bmAttributes in endpoint descriptor might not be set zero. So it's better to use usb_endpoint_type routine to mask bmAttributes with USB_ENDPOINT_XFERTYPE_MASK to judge the transfter type later. Signed-off-by:
Huang Rui <ray.huang@amd.com> Acked-by:
-
Wei Yongjun authored
Using list_move_tail() instead of list_del() + list_add_tail(). Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Huang Rui authored
The following patch is required to resolve remote wake issues with certain devices. Issue description: If the remote wake is issued from the device in a specific timing condition while the system is entering sleep state then it may cause system to auto wake on subsequent sleep cycle. Root cause: Host controller rebroadcasts the Resume signal > 100 µseconds after receiving the original resume event from the device. For proper function, some devices may require the rebroadcast of resume event within the USB spec of 100µS. Workaroud: 1. Filter the AMD platforms with Yangtze chipset, then judge of all the usb devices are mouse or not. And get out the port id which attached a mouse with Pixart controller. 2. Then reset the port which attached issue device during system resume from S3. [Q] Why the special devices are only mice? Would high speed devices such as 3G modem or USB Bluetooth adapter trigger this issue? - Current this sensitivity is only confined to devices that use Pixart controllers. This controller is designed for use with LS mouse devices only. We have not observed any other devices failing. There may be a small risk for other devices also but this patch (reset device in resume phase) will cover the cases if required. [Q] Shouldn’t the resume signal be sent within 100 us for every device? - The Host controller may not send the resume signal within 100us, this our host controller specification change. This is why we require the patch to prevent side effects on certain known devices. [Q] Why would clicking mouse INTENSELY to wake the system up trigger this issue? - This behavior is specific to the devices that use Pixart controller. It is timing dependent on when the resume event is triggered during the sleep state. [Q] Is it a host controller issue or mouse? - It is the host controller behavior during resume that triggers the device incorrect behavior on the next resume. This patch sets USB_QUIRK_RESET_RESUME flag for these Pixart-based mice when they attached to platforms with AMD Yangtze chipset. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Huang Rui authored
This patch abstracts out a AMD chipset type which includes southbridge generation and its revision. When os excutes usb_amd_find_chipset_info routine to initialize AMD chipset type, driver will know which kind of chipset is used. This update has below benifits: - Driver is able to confirm which southbridge generations and their revision are used, with chipset detection once. - To describe chipset generations with enumeration types brings better readability. - It's flexible to filter AMD platforms to implement new quirks in future. Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
-
Peter Chen authored
Like vbus, the dr_mode and phy_mode are also got from glue layer's platform data or device node. Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
-
Peter Chen authored
The udc-core will call gadget's driver->disconnect, so we should avoid calling gadget's disconnect again at ci_udc_stop in case the gadget's unbind free some structs which is still used at gadget's disconnect. Tested-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Peter Chen authored
Now, chipidea host has already depended on USB_EHCI_HCD Acked-by:
-
Peter Chen authored
There is a pending TD which is not freed after request finishes, we do this due to a controller bug. This TD needs to be freed when the driver is removed. It prints below error message when unload chipidea driver at current code: "ci_hdrc ci_hdrc.0: dma_pool_destroy ci_hw_td, b0001000 busy" It indicates the buffer at dma pool are still in use. This commit will free the pending TD at driver's removal procedure, it can fix the problem described above. Signed-off-by:
-
Tom Gundersen authored
Support for specifying soft dependencies in the modules themselves was introduced in commit 7cb14ba7. In Arch we have always been shipping a module.d(5) fragment ordering ohci/uhci after ehci. If this ordering is really necessary, it would be great to move it to the kernel and getting the correct fragment generated by depmod. Signed-off-by:
Tom Gundersen <teg@jklm.no> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
- 23 Sep, 2013 5 commits
-
-
Greg Kroah-Hartman authored
This reverts commit 3b8d7321, which brings back commit 428aac8a as it should be working for the 3.13-rc1 merge window now that Alan's other fixes are here in the tree already. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
Greg Kroah-Hartman authored
We have USB fixes now in Linus's tree that we need to properly sort out with reverts and the like in the usb-next branch, so merge them together and do it by hand. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging fixes from Greg KH: "Here are a number of small staging tree and iio driver fixes. Nothing major, just lots of little things" * tag 'staging-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (34 commits) iio:buffer_cb: Add missing iio_buffer_init() iio: Prevent race between IIO chardev opening and IIO device free iio: fix: Keep a reference to the IIO device for open file descriptors iio: Stop sampling when the device is removed iio: Fix crash when scan_bytes is computed with active_scan_mask == NULL iio: Fix mcp4725 dev-to-indio_dev conversion in suspend/resume iio: Fix bma180 dev-to-indio_dev conversion in suspend/resume iio: Fix tmp006 dev-to-indio_dev conversion in suspend/resume iio: iio_device_add_event_sysfs() bugfix staging: iio: ade7854-spi: Fix return value staging:iio:hmc5843: Fix measurement conversion iio: isl29018: Fix uninitialized value staging:iio:dummy fix kfifo_buf kconfig dependency issue if kfifo modular and buffer enabled for built in dummy driver. iio: at91: fix adc_clk overflow staging: line6: add bounds check in snd_toneport_source_put() Staging: comedi: Fix dependencies for drivers misclassified as PCI staging: r8188eu: Adjust RX gain staging: r8188eu: Fix smatch warning in core/rtw_ieee80211. staging: r8188eu: Fix smatch error in core/rtw_mlme_ext.c staging: r8188eu: Fix Smatch off-by-one warning in hal/rtl8188e_hal_init.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 3.12-rc2. One is a revert of a EHCI change that isn't quite ready for 3.12. Others are minor things, gadget fixes, Kconfig fixes, and some quirks and documentation updates. All have been in linux-next for a bit" * tag 'usb-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: pl2303: distinguish between original and cloned HX chips USB: Faraday fotg210: fix email addresses USB: fix typo in usb serial simple driver Kconfig Revert "USB: EHCI: support running URB giveback in tasklet context" usb: s3c-hsotg: do not disconnect gadget when receiving ErlySusp intr usb: s3c-hsotg: fix unregistration function usb: gadget: f_mass_storage: reset endpoint driver data when disabled usb: host: fsl-mph-dr-of: Staticize local symbols usb: gadget: f_eem: Staticize eem_alloc usb: gadget: f_ecm: Staticize ecm_alloc usb: phy: omap-usb3: Fix return value usb: dwc3: gadget: avoid memory leak when failing to allocate all eps usb: dwc3: remove extcon dependency usb: gadget: add '__ref' for rndis_config_register() and cdc_config_register() usb: dwc3: pci: add support for BayTrail usb: gadget: cdc2: fix conversion to new interface of f_ecm usb: gadget: fix a bug and a WARN_ON in dummy-hcd usb: gadget: mv_u3d_core: fix violation of locking discipline in mv_u3d_ep_disable()
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: - some small fixes for msm and exynos - a regression revert affecting nouveau users with old userspace - intel pageflip deadlock and gpu hang fixes, hsw modesetting hangs * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits) Revert "drm: mark context support as a legacy subsystem" drm/i915: Don't enable the cursor on a disable pipe drm/i915: do not update cursor in crtc mode set drm/exynos: fix return value check in lowlevel_buffer_allocate() drm/exynos: Fix address space warnings in exynos_drm_fbdev.c drm/exynos: Fix address space warning in exynos_drm_buf.c drm/exynos: Remove redundant OF dependency drm/msm: drop unnecessary set_need_resched() drm/i915: kill set_need_resched drm/msm: fix potential NULL pointer dereference drm/i915/dvo: set crtc timings again for panel fixed modes drm/i915/sdvo: Robustify the dtd<->drm_mode conversions drm/msm: workaround for missing irq drm/msm: return -EBUSY if bo still active drm/msm: fix return value check in ERR_PTR() drm/msm: fix cmdstream size check drm/msm: hangcheck harder drm/msm: handle read vs write fences drm/i915/sdvo: Fully translate sync flags in the dtd->mode conversion drm/i915: Use proper print format for debug prints ...
-
- 22 Sep, 2013 3 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block IO fixes from Jens Axboe: "After merge window, no new stuff this time only a collection of neatly confined and simple fixes" * 'for-3.12/core' of git://git.kernel.dk/linux-block: cfq: explicitly use 64bit divide operation for 64bit arguments block: Add nr_bios to block_rq_remap tracepoint If the queue is dying then we only call the rq->end_io callout. This leaves bios setup on the request, because the caller assumes when the blk_execute_rq_nowait/blk_execute_rq call has completed that the rq->bios have been cleaned up. bio-integrity: Fix use of bs->bio_integrity_pool after free blkcg: relocate root_blkg setting and clearing block: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...) block: trace all devices plug operation
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "These are mostly bug fixes and a two small performance fixes. The most important of the bunch are Josef's fix for a snapshotting regression and Mark's update to fix compile problems on arm" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits) Btrfs: create the uuid tree on remount rw btrfs: change extent-same to copy entire argument struct Btrfs: dir_inode_operations should use btrfs_update_time also btrfs: Add btrfs: prefix to kernel log output btrfs: refuse to remount read-write after abort Btrfs: btrfs_ioctl_default_subvol: Revert back to toplevel subvolume when arg is 0 Btrfs: don't leak transaction in btrfs_sync_file() Btrfs: add the missing mutex unlock in write_all_supers() Btrfs: iput inode on allocation failure Btrfs: remove space_info->reservation_progress Btrfs: kill delay_iput arg to the wait_ordered functions Btrfs: fix worst case calculator for space usage Revert "Btrfs: rework the overcommit logic to be based on the total size" Btrfs: improve replacing nocow extents Btrfs: drop dir i_size when adding new names on replay Btrfs: replay dir_index items before other items Btrfs: check roots last log commit when checking if an inode has been logged Btrfs: actually log directory we are fsync()'ing Btrfs: actually limit the size of delalloc range Btrfs: allocate the free space by the existed max extent size when ENOSPC ...
-
Anatol Pomozov authored
'samples' is 64bit operant, but do_div() second parameter is 32. do_div silently truncates high 32 bits and calculated result is invalid. In case if low 32bit of 'samples' are zeros then do_div() produces kernel crash. Signed-off-by:
Anatol Pomozov <anatol.pomozov@gmail.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 21 Sep, 2013 10 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-fixes-for-3.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for 3.12 A series of wrong 'struct dev' assumptions in suspend/resume callbacks following on from this issue being identified in a new driver review. One to watch out for in future. A number of driver specific fixes 1) at91 - fix a overflow in clock rate computation 2) dummy - Kconfig dependency issue 3) isl29018 - uninitialized value 4) hmc5843 - measurement conversion bug introduced by recent cleanup. 5) ade7854-spi - wrong return value. Some IIO core fixes 1) Wrong value picked up for event code creation for a modified channel 2) A null dereference on failure to initialize a buffer after no buffer has been in use, when using the available_scan_masks approach. 3) Sampling not stopped when a device is removed. Effects forced removal such as hot unplugging. 4) Prevent device going away if a chrdev is still open in userspace. 5) Prevent race on chardev opening and device being freed. 6) Add a missing iio_buffer_init in the call back buffer. These last few are the first part of a set from Lars-Peter Clausen who has been taking a closer look at our removal paths and buffer handling than anyone has for quite some time.
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfix from Trond Myklebust: "Fix a regression due to incorrect sharing of gss auth caches" * tag 'nfs-for-3.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: RPCSEC_GSS: fix crash on destroying gss auth
-
Jun'ichi Nomura authored
Adding the number of bios in a remapped request to 'block_rq_remap' tracepoint. Request remapper clones bios in a request to track the completion status of each bio. So the number of bios can be useful information for investigation. Related discussions: http://www.redhat.com/archives/dm-devel/2013-August/msg00084.html http://www.redhat.com/archives/dm-devel/2013-September/msg00024.htmlSigned-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by:
Mike Snitzer <snitzer@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Josef Bacik authored
Users have been complaining of the uuid tree stuff warning that there is no uuid root when trying to do snapshot operations. This is because if you mount -o ro we will not create the uuid tree. But then if you mount -o rw,remount we will still not create it and then any subsequent snapshot/subvol operations you try to do will fail gloriously. Fix this by creating the uuid_root on remount rw if it was not already there. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Mark Fasheh authored
btrfs_ioctl_file_extent_same() uses __put_user_unaligned() to copy some data back to it's argument struct. Unfortunately, not all architectures provide __put_user_unaligned(), so compiles break on them if btrfs is selected. Instead, just copy the whole struct in / out at the start and end of operations, respectively. Signed-off-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
-
Guangyu Sun authored
Commit 2bc55652 (Btrfs: don't update atime on RO subvolumes) ensures that the access time of an inode is not updated when the inode lives in a read-only subvolume. However, if a directory on a read-only subvolume is accessed, the atime is updated. This results in a write operation to a read-only subvolume. I believe that access times should never be updated on read-only subvolumes. To reproduce: # mkfs.btrfs -f /dev/dm-3 (...) # mount /dev/dm-3 /mnt # btrfs subvol create /mnt/sub Create subvolume '/mnt/sub' # mkdir /mnt/sub/dir # echo "abc" > /mnt/sub/dir/file # btrfs subvol snapshot -r /mnt/sub /mnt/rosnap Create a readonly snapshot of '/mnt/sub' in '/mnt/rosnap' # stat /mnt/rosnap/dir File: `/mnt/rosnap/dir' Size: 8 Blocks: 0 IO Block: 4096 directory Device: 16h/22d Inode: 257 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-09-11 07:21:49.389157126 -0400 Modify: 2013-09-11 07:22:02.330156079 -0400 Change: 2013-09-11 07:22:02.330156079 -0400 # ls /mnt/rosnap/dir file # stat /mnt/rosnap/dir File: `/mnt/rosnap/dir' Size: 8 Blocks: 0 IO Block: 4096 directory Device: 16h/22d Inode: 257 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-09-11 07:22:56.797151670 -0400 Modify: 2013-09-11 07:22:02.330156079 -0400 Change: 2013-09-11 07:22:02.330156079 -0400 Reported-by:
Koen De Wit <koen.de.wit@oracle.com> Signed-off-by:
Guangyu Sun <guangyu.sun@oracle.com> Signed-off-by:
-
Frank Holton authored
The kernel log entries for device label %s and device fsid %pU are missing the btrfs: prefix. Add those here. Signed-off-by:
Frank Holton <fholton@gmail.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
David Sterba authored
It's still possible to flip the filesystem into RW mode after it's remounted RO due to an abort. There are lots of places that check for the superblock error bit and will not write data, but we should not let the filesystem appear read-write. Signed-off-by:
-
chandan authored
This patch makes it possible to set BTRFS_FS_TREE_OBJECTID as the default subvolume by passing a subvolume id of 0. Signed-off-by:
chandan <chandan@linux.vnet.ibm.com> Reviewed-by:
-
Filipe David Borba Manana authored
In btrfs_sync_file(), if the call to btrfs_log_dentry_safe() returns a negative error (for e.g. -ENOMEM via btrfs_log_inode()), we would return without ending/freeing the transaction. Signed-off-by:
-
