This driver uses two iobase addresses, found in PCI bars 2 and 3.
Currently, the address in PCI bar 3 is saved in the comedi_device as
the 'iobase' and the one in PCI bar 2 is just passed to subdev_8255_init()
as the 'iobase' parameter.

Save the PCI bar 3 address in the private data as 'daqio' and the
address from PCI bar 2 in the comedi_device as the 'iobase'.

This will help with some cleanup of the 8255 module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver uses three iobase addresses, found in PCI bars 2, 3, and 4.
Currently, the address in PCI bar 2 is saved in the comedi_device as
the 'iobase', the PCI bar 3 address is saved in the private data as
'BADR3' and the one in PCI bar 4 is just passed to subdev_8255_init()
as the 'iobase' parameter.

Flip the saving of the PCI bar 2 and 4 base addresses. Save the address
from PCI bar 2 in the private data as the 'daqio' and the address from
PCI bar 4 in the comedi_device as the 'iobase'.

This will help with some cleanup of the 8255 module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the base address of the 8254 and 8255 devices, found in
PCI bar 3, is saved in the private data as 'pacer_counter_dio'.
The 'iobase' in the comedi_device is currently unused.

Save the address from PCI bar 3 in the comedi_device and remove
the unnecessary member from the private data.

This will help with some cleanup of the 8255 module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This exported function just does a free_irq() to release the interrupt
handler for the legacy and PCI dio200 drivers.

The legacy driver also calls comedi_legacy_detach() which would also
do the free_irq(). For that driver the just use comedi_legacy_detach()
directly for the (*detach).

For the PCI driver, add the free_irq() to the private (*datach) function.

Remove the, then unused, dio200_common_detach() function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only called by amplc_dio200_common_attach() and it
can never fail. For aesthetics, absorb it into that function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the boardinfo is only set for the PCIE boards. Use the
'is_pcie' flag to determine if the offset needs to be shifted when
reading/writing the registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the boardinfor is only set for the PCIE boards. For
aeshetics, rename it to 'is_pcie'.

For clarity, use this flag in the (*auto_attach) to determine if the
dio200_pcie_board_setup() function needs to be called instead of using
the switch (context_model).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function names provide enough description. The extra comments are not
necessary. Remove them.

Also, tidy up some of the function declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This struct is used to provide part of the boardinfo data. Using the extra
indirection does not provide any additional clarity to the driver.

Absorb the members from dio200_layout into dio200_board and remove the
extra 'layout' indirection.

For aesthetics, rename all the local variables used for the boardinfo
pointer to 'board'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to these declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit performs a final tidying of the register map defines, bringing
them to a state that is ready for merging into addi_apci_1564.c when the
time comes.  Actions performed include:

*Removes the APCI1564_ADDRESS_RANGE macro, which is no longer needed/used.
*Renames the APCI1564_DIGITAL_OP_{VCC,CC}_INTERRUPT_{ENABLE,DISABLE}
macros to shorter names which are more consistent with the digital input
interrupt macros.
*Fixes a typo in a comment (dev>iobase changed to dev->iobase).
*Renames the APCI1564_TCW_* macros to APCI1564_COUNTER_* names to more
accurately reflect that they are only offsets to counter registers (since
only the counters are offset from dev->iobase).
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengraver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Starting with commit 1496e596 ("staging: comedi: addi_apci_1564: use
addi_watchdog module to init watchdog subdevice"), this driver uses the
addi_watchdog module to provide support for the watchdog subdevice.  Any
remaining watchdog code in-driver can and should be removed.

This will also make future work on the timer and counter subdevices easier.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DO config function served the purpose of configuring the diagnostic
interrupts for the board.  As the driver currently does not support
diagnostic interrupts, the digital output subdevice does not need an
insn_config operation and this function can be safely removed.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to the vendorspecificextn.c that fixes coding style
warning message line over 80 characters found by checkpatch.pl script.
I am submitting this patch as required by Eudyptula Challenge.
Signed-off-by: Ramesh Basukala <basukalaramesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fix checkpatch.pl warning
Tested by compilation only.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fix checkpatch.pl warning
Tested by compilation only.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fix checkpatch.pl warning
Tested by compilation only.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes some unneeded code.
1) kzalloc() allocates 4 extra bytes so that we can align the return
   value.  But actually the return value is already aligned so we can
   remove the + 4 and the call to N_BYTE_ALIGMENT().
2) The memset() isn't needed because kzalloc() zeroes the allocation.
Suggested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to the hal/rtl8188eu_recv.c file that fixes up a "line
over 80 characters" warning found by the checkpatch.pl tool.
Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8188e_IOL_exec_cmds_sync() is a unused function.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver doesn't require these files anymore.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup and consolidate Baseband configuration related code in
HalHWImg8188E_BB.c file.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup and consolidate RF configuration related code in
HalHWImg8188E_RF.c file.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>