As dpu_core_irq was merged into dpu_hw_intr, merge data structures too,
removing the need for a separate data structure.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210617222029.463045-4-dmitry.baryshkov@linaro.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

We already clear the IRQ status register before processing IRQs, so do
not clear the register again. Especially do not clear the IRQ status
_after_ processing the IRQ as this way we can loose the event.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210617222029.463045-3-dmitry.baryshkov@linaro.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

With dpu_core_irq being the wrapper around dpu_hw_interrupts, there is
little sense in having them separate. Squash them together to remove
another layer of abstraction (hw_intr ops).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210617222029.463045-2-dmitry.baryshkov@linaro.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

This disables a lock which wasn't enabled and it does not disable
the first lock in the array.

Fixes: 6e0eb52e ("drm/msm/dsi: Parse bus clocks from a list")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211001123409.GG2283@kiliSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Return an error code if msm_dsi_manager_validate_current_config().
Don't return success.

Fixes: 8b03ad30 ("drm/msm/dsi: Use one connector for dual DSI mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211001123308.GF2283@kiliSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The downstream driver models this PLL lock check as an if-elseif-else.
The only way to reach the else case where pll_locked=true [1] is by
succeeding both readl_poll_timeout_atomic calls (which return zero on
success) in the if _and_ elseif condition.  Hence both the "lock" and
"ready" bit need to be tested in the SM_READY_STATUS register before
considering the PLL locked and ready to go.

Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630).

[1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/mdss/mdss-dsi-pll-14nm-util.c?h=LA.UM.9.2.1.r1-08000-sdm660.0#n302

Fixes: f079f6d9 ("drm/msm/dsi: Add PHY/PLL for 8x96")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210906202552.824598-1-marijn.suijten@somainline.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The commit 9f91f22a ("drm/msm/dsi: remove duplicate fields from
dsi_pll_Nnm instances") mistakenly changed registered clock names. While
the platform is in progress of migration to using clock properties in
the dts rather than the global clock names, we should provide backwards
compatibility. Thus restore registerd global clock names.

Fixes: 9f91f22a ("drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210921162245.1858118-1-dmitry.baryshkov@linaro.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Both PINGPONG4 and PINGPONG5 IRQ registers are using the
same address, which is incorrect. PINGPONG4 should use the
register offset 30, and PINGPONG5 should use the register
offset 31 according to the downstream driver.

Fixes: 667e9985 ("drm/msm/dpu: replace IRQ lookup with the data in hw catalog")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210819133636.2045766-1-robert.foss@linaro.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Since commit 98659487 ("drm/msm: add support to take dpu snapshot")
the following NULL pointer dereference is seen on i.MX53:

[ 3.275493] msm msm: bound 30000000.gpu (ops a3xx_ops)
[ 3.287174] [drm] Initialized msm 1.8.0 20130625 for msm on minor 0
[ 3.293915] 8<--- cut here ---
[ 3.297012] Unable to handle kernel NULL pointer dereference at virtual address 00000028
[ 3.305244] pgd = (ptrval)
[ 3.307989] [00000028] *pgd=00000000
[ 3.311624] Internal error: Oops: 805 [#1] SMP ARM
[ 3.316430] Modules linked in:
[ 3.319503] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0+g682d702b426b #1
[ 3.326652] Hardware name: Freescale i.MX53 (Device Tree Support)
[ 3.332754] PC is at __mutex_init+0x14/0x54
[ 3.336969] LR is at msm_disp_snapshot_init+0x24/0xa0

i.MX53 does not use the DPU controller.

Fix the problem by only calling msm_disp_snapshot_init() on platforms that
use the DPU controller.

Cc: stable@vger.kernel.org
Fixes: 98659487 ("drm/msm: add support to take dpu snapshot")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210914174831.2044420-1-festevam@gmail.comSigned-off-by: Rob Clark <robdclark@chromium.org>

These error paths returned 1 on failure, instead of a negative error
code.  This would lead to an Oops in the caller.  A second problem is
that the check for "if (ret != -ENODATA)" did not work because "ret" was
set to 1.

Fixes: 5785dd7a ("drm/msm: Fix duplicate gpu node in icc summary")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211001125904.GK2283@kiliSigned-off-by: Rob Clark <robdclark@chromium.org>

This code returns 1 on error instead of a negative error.  It leads to
an Oops in the caller.  A second problem is that the check for
"if (ret != -ENODATA)" cannot be true because "ret" is set to 1.

Fixes: 5785dd7a ("drm/msm: Fix duplicate gpu node in icc summary")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211001125759.GJ2283@kiliSigned-off-by: Rob Clark <robdclark@chromium.org>

The initialization of pointer dev dereferences pointer edp before
edp is null checked, so there is a potential null pointer deference
issue. Fix this by only dereferencing edp after edp has been null
checked.

Addresses-Coverity: ("Dereference before null check")
Fixes: ab5b0107 ("drm/msm: Initial add eDP support in msm drm driver (v5)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210929121857.213922-1-colin.king@canonical.comSigned-off-by: Rob Clark <robdclark@chromium.org>

Since f35a2a99 ("drm/encoder: make encoder control functions
optional") drm_mode_config_validate would print warnings if both cursor
plane and cursor functions are provided. Restore separate set of
drm_crtc_funcs to be used if separate cursor plane is provided.

[    6.556046] ------------[ cut here ]------------
[    6.556071] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_set func
[    6.556091] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:648 drm_mode_config_validate+0x238/0x4d0
[    6.567453] Modules linked in:
[    6.577604] CPU: 1 PID: 76 Comm: kworker/u8:2 Not tainted 5.15.0-rc1-dirty #43
[    6.580557] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
[    6.587763] Workqueue: events_unbound deferred_probe_work_func
[    6.593926] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.599740] pc : drm_mode_config_validate+0x238/0x4d0
[    6.606596] lr : drm_mode_config_validate+0x238/0x4d0
[    6.611804] sp : ffff8000121b3980
[    6.616838] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001
[    6.620140] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8
[    6.627258] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001
[    6.634376] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff
[    6.641494] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c78709
[    6.648613] x14: 0000000000000000 x13: ffff800011a22850 x12: 00000000000009ab
[    6.655730] x11: 0000000000000339 x10: ffff800011a22850 x9 : ffff800011a22850
[    6.662848] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850
[    6.669966] x5 : 000000000000bff4 x4 : 40000000fffff339 x3 : 0000000000000000
[    6.677084] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800
[    6.684205] Call trace:
[    6.691319]  drm_mode_config_validate+0x238/0x4d0
[    6.693577]  drm_dev_register+0x17c/0x210
[    6.698435]  msm_drm_bind+0x4b4/0x694
[    6.702429]  try_to_bring_up_master+0x164/0x1d0
[    6.706075]  __component_add+0xa0/0x170
[    6.710415]  component_add+0x14/0x20
[    6.714234]  msm_hdmi_dev_probe+0x1c/0x2c
[    6.718053]  platform_probe+0x68/0xe0
[    6.721959]  really_probe.part.0+0x9c/0x30c
[    6.725606]  __driver_probe_device+0x98/0x144
[    6.729600]  driver_probe_device+0xc8/0x15c
[    6.734114]  __device_attach_driver+0xb4/0x120
[    6.738106]  bus_for_each_drv+0x78/0xd0
[    6.742619]  __device_attach+0xdc/0x184
[    6.746351]  device_initial_probe+0x14/0x20
[    6.750172]  bus_probe_device+0x9c/0xa4
[    6.754337]  deferred_probe_work_func+0x88/0xc0
[    6.758158]  process_one_work+0x1d0/0x370
[    6.762671]  worker_thread+0x2c8/0x470
[    6.766839]  kthread+0x15c/0x170
[    6.770483]  ret_from_fork+0x10/0x20
[    6.773870] ---[ end trace 5884eb76cd26d274 ]---
[    6.777500] ------------[ cut here ]------------
[    6.782043] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_move func
[    6.782063] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:654 drm_mode_config_validate+0x290/0x4d0
[    6.794362] Modules linked in:
[    6.804600] CPU: 1 PID: 76 Comm: kworker/u8:2 Tainted: G        W         5.15.0-rc1-dirty #43
[    6.807555] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
[    6.816148] Workqueue: events_unbound deferred_probe_work_func
[    6.822311] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.828126] pc : drm_mode_config_validate+0x290/0x4d0
[    6.834981] lr : drm_mode_config_validate+0x290/0x4d0
[    6.840189] sp : ffff8000121b3980
[    6.845223] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001
[    6.848525] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8
[    6.855643] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001
[    6.862763] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff
[    6.869879] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c790c2
[    6.876998] x14: 0000000000000000 x13: ffff800011a22850 x12: 0000000000000a2f
[    6.884116] x11: 0000000000000365 x10: ffff800011a22850 x9 : ffff800011a22850
[    6.891234] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850
[    6.898351] x5 : 000000000000bff4 x4 : 40000000fffff365 x3 : 0000000000000000
[    6.905470] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800
[    6.912590] Call trace:
[    6.919702]  drm_mode_config_validate+0x290/0x4d0
[    6.921960]  drm_dev_register+0x17c/0x210
[    6.926821]  msm_drm_bind+0x4b4/0x694
[    6.930813]  try_to_bring_up_master+0x164/0x1d0
[    6.934459]  __component_add+0xa0/0x170
[    6.938799]  component_add+0x14/0x20
[    6.942619]  msm_hdmi_dev_probe+0x1c/0x2c
[    6.946438]  platform_probe+0x68/0xe0
[    6.950345]  really_probe.part.0+0x9c/0x30c
[    6.953991]  __driver_probe_device+0x98/0x144
[    6.957984]  driver_probe_device+0xc8/0x15c
[    6.962498]  __device_attach_driver+0xb4/0x120
[    6.966492]  bus_for_each_drv+0x78/0xd0
[    6.971004]  __device_attach+0xdc/0x184
[    6.974737]  device_initial_probe+0x14/0x20
[    6.978556]  bus_probe_device+0x9c/0xa4
[    6.982722]  deferred_probe_work_func+0x88/0xc0
[    6.986543]  process_one_work+0x1d0/0x370
[    6.991057]  worker_thread+0x2c8/0x470
[    6.995223]  kthread+0x15c/0x170
[    6.998869]  ret_from_fork+0x10/0x20
[    7.002255] ---[ end trace 5884eb76cd26d275 ]---

Fixes: aa649e87 ("drm/msm/mdp5: mdp5_crtc: Restore cursor state only if LM cursors are enabled")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210925192824.3416259-1-dmitry.baryshkov@linaro.orgSigned-off-by: Rob Clark <robdclark@chromium.org>

The return type of ktime_divns() is s64. The timeout_to_jiffies() currently
assigns the result of this ktime_divns() to unsigned long, which on 32 bit
systems may overflow. Furthermore, the result of this function is sometimes
also passed to functions which expect signed long, dma_fence_wait_timeout()
is one such example.

Fix this by adjusting the type of remaining_jiffies to s64, so we do not
suffer overflow there, and return a value limited to range of 0..INT_MAX,
which is safe for all usecases of this timeout.

The above overflow can be triggered if userspace passes in too large timeout
value, larger than INT_MAX / HZ seconds. The kernel detects it and complains
about "schedule_timeout: wrong timeout value %lx" and generates a warning
backtrace.

Note that this fixes commit 6cedb8b3 ("drm/msm: avoid using 'timespec'"),
because the previously used timespec_to_jiffies() function returned unsigned
long instead of s64:
static inline unsigned long timespec_to_jiffies(const struct timespec *value)

Fixes: 6cedb8b3 ("drm/msm: avoid using 'timespec'")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: stable@vger.kernel.org # 5.6+
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210917005913.157379-1-marex@denx.deSigned-off-by: Rob Clark <robdclark@chromium.org>

There is no devfreq on a3xx at the moment since gpu_busy is not
implemented. This means that msm_devfreq_init() will return early
and the entire devfreq setup is skipped.

However, msm_devfreq_active() and msm_devfreq_idle() are still called
unconditionally later, causing a NULL pointer dereference:

  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
  Internal error: Oops: 96000004 [#1] PREEMPT SMP
  CPU: 0 PID: 133 Comm: ring0 Not tainted 5.15.0-rc1 #4
  Hardware name: Longcheer L8150 (DT)
  pc : mutex_lock_io+0x2bc/0x2f0
  lr : msm_devfreq_active+0x3c/0xe0 [msm]
  Call trace:
   mutex_lock_io+0x2bc/0x2f0
   msm_gpu_submit+0x164/0x180 [msm]
   msm_job_run+0x54/0xe0 [msm]
   drm_sched_main+0x2b0/0x4a0 [gpu_sched]
   kthread+0x154/0x160
   ret_from_fork+0x10/0x20

Fix this by adding a check in msm_devfreq_active/idle() which ensures
that devfreq was actually initialized earlier.

Fixes: 9bc95570 ("drm/msm: Devfreq tuning")
Reported-by: Nikita Travkin <nikita@trvn.ru>
Tested-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210913164556.16284-1-stephan@gerhold.netSigned-off-by: Rob Clark <robdclark@chromium.org>

Currently there is audio not working problem after system resume from suspend
if hdmi monitor stay plugged in at DUT. However this problem does not happen
at normal operation but at a particular test case. The root cause is DP driver
signal audio with connected state at resume which trigger audio trying to setup
audio data path through DP main link but failed due to display port is not setup
and enabled by upper layer framework yet. This patch only have DP driver signal
audio only when DP is in disconnected state so that audio option shows correct
state after system resume. DP driver will not signal audio with connected state
until display enabled executed by upper layer framework where display port is
setup completed and main link is running.

Changes in V2:
-- add details commit text

Fixes: afc9b8b6 ("drm/msm/dp: signal audio plugged change at dp_pm_resume")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1632932224-25102-1-git-send-email-khsieh@codeaurora.orgSigned-off-by: Rob Clark <robdclark@chromium.org>

The overflow check does causes a warning from clang-14 when 'sz' is a type
that is smaller than size_t:

drivers/gpu/drm/msm/msm_gem_submit.c:217:10: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
                if (sz == SIZE_MAX) {

Change the type accordingly.

Fixes: 20224d71 ("drm/msm/submit: Move copy_from_user ahead of locking bos")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210927113632.3849987-1-arnd@kernel.orgSigned-off-by: Rob Clark <robdclark@chromium.org>

Some userspace apps make assumptions that rendering against multiple
contexts within the same process (from the same thread, with appropriate
MakeCurrent() calls) provides sufficient synchronization without any
external synchronization (ie. glFenceSync()/glWaitSync()).  Since a
submitqueue maps to a gl/vk context, having multiple sched entities of
the same priority only works with implicit sync enabled.

To fix this, limit things to a single sched entity per priority level
per process.

An alternative would be sharing submitqueues between contexts in
userspace, but tracking of per-context faults (ie. GL_EXT_robustness)
is already done at the submitqueue level, so this is not an option.
Signed-off-by: Rob Clark <robdclark@chromium.org>

msm_file_private is more gpu related, and in the next commit it will
need access to other GPU specific #defines.  While we're at it, add
some comments.
Signed-off-by: Rob Clark <robdclark@chromium.org>

In theory a context can be destroyed and a new one allocated at the same
address, making the pointer comparision to detect when we don't need to
update the current pagetables invalid.  Instead assign a sequence number
to each context on creation, and use this for the check.

Fixes: 84c31ee1 ("drm/msm/a6xx: Add support for per-instance pagetables")
Signed-off-by: Rob Clark <robdclark@chromium.org>

I've seen some crashes in our crash reporting that *look* like multiple
threads stomping on each other while communicating with GMU.  So wrap
all those paths in a lock.
Signed-off-by: Rob Clark <robdclark@chromium.org>

If the device file was opened prior to fw being available (such as from
initrd before rootfs is mounted, when the initrd does not contain GPU
fw), that would cause a later crash when the dev file is closed due to
unitialized submitqueues list:

   CPU: 4 PID: 263 Comm: plymouthd Tainted: G        W         5.15.0-rc2-next-20210924 #2
   Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN33WW(V2.06) 06/ 4/2019
   pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
   pc : msm_submitqueue_close+0x30/0x190 [msm]
   lr : msm_postclose+0x54/0xf0 [msm]
   sp : ffff80001074bb80
   x29: ffff80001074bb80 x28: ffff03ad80c4db80 x27: ffff03ad80dc5ab0
   x26: 0000000000000000 x25: ffff03ad80dc5af8 x24: ffff03ad81e90800
   x23: 0000000000000000 x22: ffff03ad81e90800 x21: ffff03ad8b35e788
   x20: ffff03ad81e90878 x19: 0000000000000000 x18: 0000000000000000
   x17: 0000000000000000 x16: ffffda15f14f7940 x15: 0000000000000000
   x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000040
   x11: 0000000000000000 x10: 0000000000000000 x9 : ffffda15cd18ff88
   x8 : ffff03ad80c4db80 x7 : 0000000000000228 x6 : 0000000000000000
   x5 : 1793a4e807e636bd x4 : ffff03ad80c4db80 x3 : ffff03ad81e90878
   x2 : 0000000000000000 x1 : ffff03ad80c4db80 x0 : 0000000000000000
   Call trace:
    msm_submitqueue_close+0x30/0x190 [msm]
    msm_postclose+0x54/0xf0 [msm]
    drm_file_free.part.0+0x1cc/0x2e0 [drm]
    drm_close_helper.isra.0+0x74/0x84 [drm]
    drm_release+0x78/0x120 [drm]
    __fput+0x78/0x23c
    ____fput+0x1c/0x30
    task_work_run+0xcc/0x22c
    do_exit+0x304/0x9f4
    do_group_exit+0x44/0xb0
    __wake_up_parent+0x0/0x3c
    invoke_syscall+0x50/0x120
    el0_svc_common.constprop.0+0x4c/0xf4
    do_el0_svc+0x30/0x9c
    el0_svc+0x20/0x60
    el0t_64_sync_handler+0xe8/0xf0
    el0t_64_sync+0x1a0/0x1a4
   Code: aa0003f5 a90153f3 f8408eb3 aa1303e0 (f85e8674)
   ---[ end trace 39b2fa37509a2be2 ]---
   Fixing recursive fault but reboot is needed!

Fixes: 86c2a0f0 drm/msm: ("Small submitqueue creation cleanup")
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Pull ksmbd fixes from Steve French:
 "Five fixes for the ksmbd kernel server, including three security
  fixes:

   - remove follow symlinks support

   - use LOOKUP_BENEATH to prevent out of share access

   - SMB3 compounding security fix

   - fix for returning the default streams correctly, fixing a bug when
     writing ppt or doc files from some clients

   - logging more clearly that ksmbd is experimental (at module load
     time)"

* tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: use LOOKUP_BENEATH to prevent the out of share access
  ksmbd: remove follow symlinks support
  ksmbd: check protocol id in ksmbd_verify_smb_message()
  ksmbd: add default data stream name in FILE_STREAM_INFORMATION
  ksmbd: log that server is experimental at module load

Pull EDAC fixes from Borislav Petkov:
 "Fix two EDAC drivers using the wrong value type for the DIMM mode"

* tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/dmc520: Assign the proper type to dimm->edac_mode
  EDAC/synopsys: Fix wrong value type assignment for edac_mode

Pull thermal fixes from Daniel Lezcano:

 - Fix thermal shutdown after a suspend/resume due to a wrong TCC value
   restored on Intel platform (Antoine Tenart)

 - Fix potential buffer overflow when building the list of policies. The
   buffer size is not updated after writing to it (Dan Carpenter)

 - Fix wrong check against IS_ERR instead of NULL (Ansuel Smith)

* tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/drivers/tsens: Fix wrong check for tzd in irq handlers
  thermal/core: Potential buffer overflow in thermal_build_list_of_policies()
  thermal/drivers/int340x: Do not set a wrong tcc offset on resume

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for X86:

   - Prevent sending the wrong signal when protection keys are enabled
     and the kernel handles a fault in the vsyscall emulation.

   - Invoke early_reserve_memory() before invoking e820_memory_setup()
     which is required to make the Xen dom0 e820 hooks work correctly.

   - Use the correct data type for the SETZ operand in the EMQCMDS
     instruction wrapper.

   - Prevent undefined behaviour to the potential unaligned accesss in
     the instruction decoder library"

* tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses
  x86/asm: Fix SETZ size enqcmds() build failure
  x86/setup: Call early_reserve_memory() earlier
  x86/fault: Fix wrong signal when vsyscall fails with pkey

Pull timer fix from Thomas Gleixner:
 "A single fix for the recently introduced regression in posix CPU
  timers which failed to stop the timer when requested. That caused
  unexpected signals to be sent to the process/thread causing
  malfunction"

* tag 'timers-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Prevent spuriously armed 0-value itimer

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for interrupt chip drivers:

   - Work around a bad GIC integration on a Renesas platform which can't
     handle byte-sized MMIO access

   - Plug a potential memory leak in the GICv4 driver

   - Fix a regression in the Armada 370-XP IPI code which was caused by
     issuing EOI instack of ACK.

   - A couple of small fixes here and there"

* tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic: Work around broken Renesas integration
  irqchip/renesas-rza1: Use semicolons instead of commas
  irqchip/gic-v3-its: Fix potential VPE leak on error
  irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build
  irqchip/mbigen: Repair non-kernel-doc notation
  irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent
  irqchip/armada-370-xp: Fix ack/eoi breakage
  Documentation: Fix irq-domain.rst build warning

Merge misc fixes from Andrew Morton:
 "16 patches.

  Subsystems affected by this patch series: xtensa, sh, ocfs2, scripts,
  lib, and mm (memory-failure, kasan, damon, shmem, tools, pagecache,
  debug, and pagemap)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix uninitialized use in overcommit_policy_handler
  mm/memory_failure: fix the missing pte_unmap() call
  kasan: always respect CONFIG_KASAN_STACK
  sh: pgtable-3level: fix cast to pointer from integer of different size
  mm/debug: sync up latest migrate_reason to migrate_reason_names
  mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN
  mm: fs: invalidate bh_lrus for only cold path
  lib/zlib_inflate/inffast: check config in C to avoid unused function warning
  tools/vm/page-types: remove dependency on opt_file for idle page tracking
  scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' error
  ocfs2: drop acl cache for directories too
  mm/shmem.c: fix judgment error in shmem_is_huge()
  xtensa: increase size of gcc stack frame check
  mm/damon: don't use strnlen() with known-bogus source length
  kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS
  mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()

Pull SCSI fixes from James Bottomley:
 "Thirty-three fixes, I'm afraid.

  Essentially the build up from the last couple of weeks while I've been
  dealling with Linux Plumbers conference infrastructure issues. It's
  mostly the usual assortment of spelling fixes and minor corrections.

  The only core relevant changes are to the sd driver to reduce the spin
  up message spew and fix a small memory leak on the freeing path"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (33 commits)
  scsi: ses: Retry failed Send/Receive Diagnostic commands
  scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"
  scsi: lpfc: Fix gcc -Wstringop-overread warning, again
  scsi: lpfc: Use correct scnprintf() limit
  scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn()
  scsi: core: Remove 'current_tag'
  scsi: acornscsi: Remove tagged queuing vestiges
  scsi: fas216: Kill scmd->tag
  scsi: qla2xxx: Restore initiator in dual mode
  scsi: ufs: core: Unbreak the reset handler
  scsi: sd_zbc: Support disks with more than 2**32 logical blocks
  scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling"
  scsi: bsg: Fix device unregistration
  scsi: sd: Make sd_spinup_disk() less noisy
  scsi: ufs: ufs-pci: Fix Intel LKF link stability
  scsi: mpt3sas: Clean up some inconsistent indenting
  scsi: megaraid: Clean up some inconsistent indenting
  scsi: sr: Fix spelling mistake "does'nt" -> "doesn't"
  scsi: Remove SCSI CDROM MAINTAINERS entry
  scsi: megaraid: Fix Coccinelle warning
  ...

Pull io_uring fixes from Jens Axboe:
 "This one looks a bit bigger than it is, but that's mainly because 2/3
  of it is enabling IORING_OP_CLOSE to close direct file descriptors.

  We've had a few folks using them and finding it confusing that the way
  to close them is through using -1 for file update, this just brings
  API symmetry for direct descriptors. Hence I think we should just do
  this now and have a better API for 5.15 release. There's some room for
  de-duplicating the close code, but we're leaving that for the next
  merge window.

  Outside of that, just small fixes:

   - Poll race fixes (Hao)

   - io-wq core dump exit fix (me)

   - Reschedule around potentially intensive tctx and buffer iterators
     on teardown (me)

   - Fix for always ending up punting files update to io-wq (me)

   - Put the provided buffer meta data under memcg accounting (me)

   - Tweak for io_write(), removing dead code that was added with the
     iterator changes in this release (Pavel)"

* tag 'io_uring-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
  io_uring: make OP_CLOSE consistent with direct open
  io_uring: kill extra checks in io_write()
  io_uring: don't punt files update to io-wq unconditionally
  io_uring: put provided buffer meta data under memcg accounting
  io_uring: allow conditional reschedule for intensive iterators
  io_uring: fix potential req refcount underflow
  io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow
  io_uring: fix race between poll completion and cancel_hash insertion
  io-wq: ensure we exit if thread group is exiting

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
      - keep ctrl->namespaces ordered (Christoph Hellwig)
      - fix incorrect h2cdata pdu offset accounting in nvme-tcp (Sagi
        Grimberg)
      - handled updated hw_queues in nvme-fc more carefully (Daniel
        Wagner, James Smart)

 - md lock order fix (Christoph)

 - fallocate locking fix (Ming)

 - blktrace UAF fix (Zhihao)

 - rq-qos bio tracking fix (Ming)

* tag 'block-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
  block: hold ->invalidate_lock in blkdev_fallocate
  blktrace: Fix uaf in blk_trace access after removing by sysfs
  block: don't call rq_qos_ops->done_bio if the bio isn't tracked
  md: fix a lock order reversal in md_alloc
  nvme: keep ctrl->namespaces ordered
  nvme-tcp: fix incorrect h2cdata pdu offset accounting
  nvme-fc: remove freeze/unfreeze around update_nr_hw_queues
  nvme-fc: avoid race between time out and tear down
  nvme-fc: update hardware queues before using them

Pull xen fixes from Juergen Gross:
 "Some minor cleanups and fixes of some theoretical bugs, as well as a
  fix of a bug introduced in 5.15-rc1"

* tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/x86: fix PV trap handling on secondary processors
  xen/balloon: fix balloon kthread freezing
  swiotlb-xen: this is PV-only on x86
  xen/pci-swiotlb: reduce visibility of symbols
  PCI: only build xen-pcifront in PV-enabled environments
  swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests
  Xen/gntdev: don't ignore kernel unmapping error
  xen/x86: drop redundant zeroing from cpu_initialize_context()

Merge tag 'linux-kselftest-fixes-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:

 - fix to Kselftest common framework header install to run before other
   targets for it work correctly in parallel build case.

 - fixes to kvm test to not ignore fscanf() returns which could result
   in inconsistent test behavior and failures.

* tag 'linux-kselftest-fixes-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: kvm: fix get_run_delay() ignoring fscanf() return warn
  selftests: kvm: move get_run_delay() into lib/test_util
  selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warn
  selftests:kvm: fix get_warnings_count() ignoring fscanf() return warn
  selftests: be sure to make khdr before other targets

Pull erofs fixes from Gao Xiang:
 "Two bugfixes to fix the 4KiB blockmap chunk format availability and a
  dangling pointer usage. There is also a trivial cleanup to clarify
  compacted_2b if compacted_4b_initial > totalidx.

  Summary:

   - fix the dangling pointer use in erofs_lookup tracepoint

   - fix unsupported chunk format check

   - zero out compacted_2b if compacted_4b_initial > totalidx"

* tag 'erofs-for-5.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: clear compacted_2b if compacted_4b_initial > totalidx
  erofs: fix misbehavior of unsupported chunk format check
  erofs: fix up erofs_lookup tracepoint

Pull cifs fixes from Steve French:
 "Six small cifs/smb3 fixes, two for stable:

   - important fix for deferred close (found by a git functional test)
     related to attribute caching on close.

   - four (two cosmetic, two more serious) small fixes for problems
     pointed out by smatch via Dan Carpenter

   - fix for comment formatting problems pointed out by W=1"

* tag '5.15-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix incorrect check for null pointer in header_assemble
  smb3: correct server pointer dereferencing check to be more consistent
  smb3: correct smb3 ACL security descriptor
  cifs: Clear modified attribute bit from inode flags
  cifs: Deal with some warnings from W=1
  cifs: fix a sign extension bug

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.15-rc3.

  Nothing huge in here, just fixes for a number of small issues that
  have been reported. These include:

   - habanalabs race conditions and other bugs fixed

   - binder driver fixes

   - fpga driver fixes

   - coresight build warning fix

   - nvmem driver fix

   - comedi memory leak fix

   - bcm-vk tty race fix

   - other tiny driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  comedi: Fix memory leak in compat_insnlist()
  nvmem: NVMEM_NINTENDO_OTP should depend on WII
  misc: bcm-vk: fix tty registration race
  fpga: dfl: Avoid reads to AFU CSRs during enumeration
  fpga: machxo2-spi: Fix missing error code in machxo2_write_complete()
  fpga: machxo2-spi: Return an error on failure
  habanalabs: expose a single cs seq in staged submissions
  habanalabs: fix wait offset handling
  habanalabs: rate limit multi CS completion errors
  habanalabs/gaudi: fix LBW RR configuration
  habanalabs: Fix spelling mistake "FEADBACK" -> "FEEDBACK"
  habanalabs: fail collective wait when not supported
  habanalabs/gaudi: use direct MSI in single mode
  habanalabs: fix kernel OOPs related to staged cs
  habanalabs: fix potential race in interrupt wait ioctl
  mcb: fix error handling in mcb_alloc_bus()
  misc: genwqe: Fixes DMA mask setting
  coresight: syscfg: Fix compiler warning
  nvmem: core: Add stubs for nvmem_cell_read_variable_le_u32/64 if !CONFIG_NVMEM
  binder: make sure fd closes complete
  ...

Pull staging driver fixes from Greg KH:
 "Here are two small staging driver fixes for 5.15-rc3:

   - greybus tty use-after-free bugfix

   - r8188eu ioctl overlap build warning fix

  Note, the r8188eu ioctl has been entirely removed for 5.16-rc1, but
  it's good to get this fixed now for people using this in 5.15.

  Both of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: fix -Wrestrict warnings
  staging: greybus: uart: fix tty use after free

Pull tty/serial fixes from Greg KH:
 "Here are four small tty/serial driver fixes for 5.15-rc3. They
  include:

   - remove an export now that no one is using it anymore

   - mvebu-uart tx_empty callback fix

   - 8250_omap bugfix

   - synclink_gt build fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: unexport tty_ldisc_release
  tty: synclink_gt: rename a conflicting function name
  serial: mvebu-uart: fix driver's tx_empty callback
  serial: 8250: 8250_omap: Fix RX_LVL register offset