- 15 May, 2019 1 commit
-
-
git://github.com/skeggsb/linuxDave Airlie authored
Mostly fixes for a number of modesetting-related issues that have been reported, as well as initial support for TU117 modesetting. TU116 also exists these days, but is not officially supported, as I don't have HW yet to verify against. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv77U7_bWYy9CUVGU8zAE0NZcKOLp6kUgppgq9HPd0tBnw@mail.gmail.com
-
- 14 May, 2019 7 commits
-
-
Peteris Rudzusiks authored
nv50_head_atomic_duplicate_state() makes a copy of nv50_head_atom struct. This patch adds copying of struct member named "or", which previously was left uninitialized in the duplicated structure. Due to this bug, incorrect nhsync and nvsync values were sometimes used. In my particular case, that lead to a mismatch between the output resolution of the graphics device (GeForce GT 630 OEM) and the reported input signal resolution on the display. xrandr reported 1680x1050, but the display reported 1280x1024. As a result of this mismatch, the output on the display looked like it was cropped (only part of the output was actually visible on the display). git bisect pointed to commit 2ca7fb5c ("drm/nouveau/kms/nv50: handle SetControlOutputResource from head"), which added the member "or" to nv50_head_atom structure, but forgot to copy it in nv50_head_atomic_duplicate_state(). Fixes: 2ca7fb5c ("drm/nouveau/kms/nv50: handle SetControlOutputResource from head") Signed-off-by:
Peteris Rudzusiks <peteris.rudzusiks@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Where possible, we want the failsafe link configuration (one which won't hang the OR during modeset because of not enough bandwidth for the mode) to also be supported by the sink. This prevents "link rate unsupported by sink" messages when link training fails. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Modesetting only, still waiting on ACR/GR firmware from NVIDIA for Turing graphics/compute bring-up. Each subsystem was compared with traces, along with various tests to check that things generally work as they should, and appears compatible enough with the current TU106 code to enable support. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
HW has error checks in place which check that pixel depth is explicitly provided on DP, while HDMI has a "default" setting that we use. In multi-display configurations with identical modelines, but different protocols (HDMI + DP, in this case), it was possible for the DP head to get swapped to the head which previously drove the HDMI output, without updating HeadSetControlOutputResource(), triggering the error check and hanging the core update. Reported-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Accidentally introduced during Volta bring-up. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Cursor position updates were accidentally causing us to attempt to interlock window with window immediate, and without a matching window immediate update, NVDisplay could hang forever in some circumstances. Fixes suspend/resume on (at least) Quadro RTX4000 (TU104). Reported-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
- 10 May, 2019 2 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
- Fix a crash on gpu reset at driver load time - ATPX hotplug fix for when the dGPU is powered off - PLL fix for r5xx asics - SR-IOV fixes Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190509230017.3566-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2019-05-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Two fixes for the freshly enabled semaphore ordering code - Includes gvt-next-fixes-2019-05-07 Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190509100109.GA14820@jlahtine-desk.ger.corp.intel.com
-
- 09 May, 2019 4 commits
-
-
Alex Deucher authored
In case we need to use them for GPU reset prior initializing the asic. Fixes a crash if the driver attempts to reset the GPU at driver load time. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Christian König authored
Instead of the closest reference divider prefer the lowest, this fixes flickering issues on HP Compaq nx9420. Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=108514Suggested-by:
Paul Dufresne <dufresnep@gmail.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2019-05-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next - A handful of fixes from -next that just missed feature freeze - More panfrost fixes that went directly in -misc-next-fixes (various) - Fix searchpaths during build (Masahiro) - msm patch to fix the driver for chips without zap shader (Rob) - Fix freeing imported buffers in drm_gem_cma_free_object() (Noralf) Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rob Clark <robdclark@chromium.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190508205153.GA91135@art_vandelay
-
git://linux-arm.org/linux-ldDave Airlie authored
This is the 2nd pull request for the malidp-next. The new patches add additional support for Arm Mali D71 so that it can now be enabled correctly and brought up on any SoC that contains the IP. From now on we will start focusing on adding writeback, scaling and other useful features to bring the driver to the same level of maturity as mali-dp. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190507103712.GJ15144@e110455-lin.cambridge.arm.com
-
- 08 May, 2019 2 commits
-
-
Rob Clark authored
Depending on platform firmware, a zap shader may not be required to take the GPU out of secure mode on boot, in which case we can just write RBBM_SECVID_TRUST_CNTL directly. Which we *mostly* handled, but missed clearing 'ret' resulting that hw_init() returned an error on these devices. Fixes: abccb9fe ("drm/msm/a6xx: Add zap shader load") Acked-by:
Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by:
Sean Paul <sean@poorly.run> Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190508130726.27557-1-robdclark@gmail.com
-
Noralf Trønnes authored
The logic for freeing an imported buffer with a virtual address is broken. It will free the buffer instead of unmapping the dma buf. Fix by reversing the if ladder and first check if the buffer is imported. Fixes: b9068cde ("drm/cma-helper: Add DRM_GEM_CMA_VMAP_DRIVER_OPS") Cc: stable@vger.kernel.org Reported-by:
"Li, Tingqian" <tingqian.li@intel.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190426124753.53722-1-noralf@tronnes.org
-
- 07 May, 2019 11 commits
-
-
Evan Quan authored
profile_exit performance level setting is valid only when current mode is in profile mode. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Trigger Huang authored
One Vega10 SR-IOV VF, the FW address returned by PSP should be set into the init table, while not the original BO mc address. otherwise, UVD and VCE IB test will fail under Vega10 SR-IOV reference: commit bfcea520 ("drm/amdgpu:change VEGA booting with firmware loaded by PSP") commit aa5873dc ("drm/amdgpu: Change VCE booting with firmware loaded by PSP") Signed-off-by:
Trigger Huang <Trigger.Huang@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Mario Kleiner authored
As discussed with Nicholas and Daniel Vetter (patchwork link to discussion below), the VRR timestamping behaviour produced utterly useless and bogus vblank/pageflip timestamps. We have found a way to fix this and provide sane behaviour. As of Linux 5.2, the amdgpu driver will be able to provide exactly the same vblank / pageflip timestamp semantic in variable refresh rate mode as in standard fixed refresh rate mode. This is achieved by deferring core vblank handling (drm_crtc_handle_vblank()) until the end of front porch, and also defer the sending of pageflip completion events until end of front porch, when we can safely compute correct pageflip/vblank timestamps. The same approach will be possible for other VRR capable kms drivers, so we can actually have sane and useful timestamps in VRR mode. This patch removes the section of the docs that describes the broken timestamp behaviour present in Linux 5.0/5.1. Fixes: ab7a664f ("drm: Document variable refresh properties") Link: https://patchwork.freedesktop.org/patch/285333/Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190418060157.18968-1-mario.kleiner.de@gmail.com Cc: stable@vger.kernel.org
-
https://github.com/intel/gvt-linuxJoonas Lahtinen authored
Merge tag 'gvt-next-fixes-2019-05-07' of https://github.com/intel/gvt-linux into drm-intel-next-fixes gvt-next-fixes-2019-05-07 - Revert MCHBAR save range change for BXT regression (Yakui) - Align display dmabuf size for bytes instead of error-prone pages (Xiong) - Fix one context MMIO save/restore after RCS0 name change (Colin) - Misc klocwork warning/errors fixes (Aleksei) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> From: Zhenyu Wang <zhenyu.z.wang@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190507090558.GE12913@zhen-hp.sh.intel.com
-
Fix the kbuild test rebot reported warnings: - symbol was not declared. Should it be static? - missing braces around initializer Depends on: - https://patchwork.freedesktop.org/series/58976/Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
james qian wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com>
-
Fixed the warnings: Function parameter or member 'xxx' not described when make htmldocs This patch depends on: - https://patchwork.freedesktop.org/series/54448/ - https://patchwork.freedesktop.org/series/54449/ - https://patchwork.freedesktop.org/series/54450/ v2: Rebase and add reporter Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com>
-
CHIP set bus_width according to the HW configuration, and CORE will use it as buffer alignment. v2: Rebase Signed-off-by:
James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com>
-
Add two sysfs node: core_id, config_id, user can read them to fetch the HW product information. Also, use memset to initialize config_id, rather than quirky C syntax. Courtesy of Nathan Chancellor <natechancellor@gmail.com>. Signed-off-by:
James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> [Merged Nathan's patch that uses memset to initialize config_id into original patch as the fixes tag changed due to rebase, reworded the commit to reference the merged patch] Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com>
-
Chris Wilson authored
Asking the GPU to busywait on a memory address, perhaps not unexpectedly in hindsight for a shared system, leads to bus contention that affects CPU programs trying to concurrently access memory. This can manifest as a drop in transcode throughput on highly over-saturated workloads. The only clue offered by perf, is that the bus-cycles (perf stat -e bus-cycles) jumped by 50% when enabling semaphores. This corresponds with extra CPU active cycles being attributed to intel_idle's mwait. This patch introduces a heuristic to try and detect when more than one client is submitting to the GPU pushing it into an oversaturated state. As we already keep track of when the semaphores are signaled, we can inspect their state on submitting the busywait batch and if we planned to use a semaphore but were too late, conclude that the GPU is overloaded and not try to use semaphores in future requests. In practice, this means we optimistically try to use semaphores for the first frame of a transcode job split over multiple engines, and fail if there are multiple clients active and continue not to use semaphores for the subsequent frames in the sequence. Periodically, we try to optimistically switch semaphores back on whenever the client waits to catch up with the transcode results. With 1 client, on Broxton J3455, with the relative fps normalized by %cpu: x no semaphores + drm-tip * patched +------------------------------------------------------------------------+ | * | | *+ | | **+ | | **+ x | | x * +**+ x | | x x * * +***x xx | | x x * * *+***x *x | | x x* + * * *****x *x x | | + x xx+x* + *** * ********* x * | | + x xx+x* * *** +** ********* xx * | | * + ++++* + x*x****+*+* ***+*************+x* * | |*+ +** *+ + +* + *++****** *xxx**********x***+*****************+*++ *| | |__________A_____M_____| | | |_______________A____M_________| | | |____________A___M________| | +------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 120 2.60475 3.50941 3.31123 3.2143953 0.21117399 + 120 2.3826 3.57077 3.25101 3.1414161 0.28146407 Difference at 95.0% confidence -0.0729792 +/- 0.0629585 -2.27039% +/- 1.95864% (Student's t, pooled s = 0.248814) * 120 2.35536 3.66713 3.2849 3.2059917 0.24618565 No difference proven at 95.0% confidence With 10 clients over-saturating the pipeline: x no semaphores + drm-tip * patched +------------------------------------------------------------------------+ | ++ ** | | ++ ** | | ++ ** | | ++ ** | | ++ xx *** | | ++ xx *** | | ++ xxx*** | | ++ xxx*** | | +++ xxx*** | | +++ xx**** | | +++ xx**** | | +++ xx**** | | +++ xx**** | | ++++ xx**** | | +++++ xx**** | | +++++ x x****** | | ++++++ xxx******* | | ++++++ xxx******* | | ++++++ xxx******* | | ++++++ xx******** | | ++++++ xxxx******** | | ++++++ xxxx******** | | ++++++++ xxxxx********* | |+ + + + ++++++++ xxx*xx**********x* *| | |__A__| | | |__AM__| | | |__A_| | +------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 120 2.47855 2.8972 2.72376 2.7193402 0.074604933 + 120 1.17367 1.77459 1.71977 1.6966782 0.085850697 Difference at 95.0% confidence -1.02266 +/- 0.0203502 -37.607% +/- 0.748352% (Student's t, pooled s = 0.0804246) * 120 2.57868 3.00821 2.80142 2.7923878 0.058646477 Difference at 95.0% confidence 0.0730476 +/- 0.0169791 2.68622% +/- 0.624383% (Student's t, pooled s = 0.0671018) Indicating that we've recovered the regression from enabling semaphores on this saturated setup, with a hint towards an overall improvement. Very similar, but of smaller magnitude, results are observed on both Skylake(gt2) and Kabylake(gt4). This may be due to the reduced impact of bus-cycles, where we see a 50% hit on Broxton, it is only 10% on the big core, in this particular test. One observation to make here is that for a greedy client trying to maximise its own throughput, using semaphores is the right choice. It is only the holistic system-wide view that semaphores of one client impacts another and reduces the overall throughput where we would choose to disable semaphores. The most noticeable negactive impact this has is on the no-op microbenchmarks, which are also very notable for having no cpu bus load. In particular, this increases the runtime and energy consumption of gem_exec_whisper. Fixes: e8861964 ("drm/i915: Use HW semaphores for inter-engine synchronisation on gen8+") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Dmitry Ermilov <dmitry.ermilov@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190504070707.30902-1-chris@chris-wilson.co.uk (cherry picked from commit ca6e56f6) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
Currently we submit the semaphore busywait as soon as the signaler is submitted to HW. However, we may submit the signaler as the tail of a batch of requests, and even not as the first context in the HW list, i.e. the busywait may start spinning far in advance of the signaler even starting. If we wait until the request before the signaler is completed before submitting the busywait, we prevent the busywait from starting too early, if the signaler is not first in submission port. To handle the case where the signaler is at the start of the second (or later) submission port, we will need to delay the execution callback until we know the context is promoted to port0. A challenge for later. Fixes: e8861964 ("drm/i915: Use HW semaphores for inter-engine synchronisation on gen8+") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190501114541.10077-9-chris@chris-wilson.co.uk (cherry picked from commit 0d90ccb7) [Joonas: edited Fixes: tag into single line.] Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Andres Rodriguez authored
Add vendor/product pairs for the Valve Index HMDs. Signed-off-by:
Andres Rodriguez <andresx7@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Cc: <stable@vger.kernel.org> # v4.15 Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190502193157.15692-1-andresx7@gmail.com
-
- 06 May, 2019 6 commits
-
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
things are still slow in etnaviv land, so we don't have anything major to destage. Just a couple of non-critical fixes that I want to land in 5.2. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1556874643.2590.15.camel@pengutronix.de
-
Nicholas Kazlauskas authored
[Why] The type of 'r' is uint32_t and the return codes for both: - reservation_object_wait_timeout_rcu - amdgpu_bo_reserve ...are signed. While it works for the latter since the check is done on != 0 it doesn't work for the former since we check <= 0. [How] Make 'r' a long in commit planes so we're not doing any unsigned/signed conversion here in the first place. v2: use long instead of int (Christian) Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Trigger Huang authored
SR-IOV host side will send IDH_QUERY_ALIVE to guest VM to check if this guest VM is still alive (not destroyed). The only thing guest KMD need to do is to send ACK back to host. Signed-off-by:
Trigger Huang <Trigger.Huang@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Trigger Huang authored
amdgpu_vm_make_compute is used to turn a GFX VM into a compute VM, the prerequisite is this VM is clean. Let's check if some page tables are already filled , while not check if some mapping is already made. Signed-off-by:
Trigger Huang <Trigger.Huang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Trigger Huang authored
In Multi-VFs stress test, sometimes we see IRQ lost when running benchmark, just rearm it. Signed-off-by:
Trigger Huang <Trigger.Huang@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Aaron Liu authored
In amdgpu_atif_handler, when hotplug event received, remove ATPX_DGPU_REQ_POWER_FOR_DISPLAYS check. This bit's check will cause missing system resume. Signed-off-by:
Aaron Liu <aaron.liu@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 05 May, 2019 1 commit
-
-
Colin Xu authored
Depends on GEN family and I915_PARAM_HAS_CONTEXT_ISOLATION, Mesa driver will decide whether constant buffer 0 address is relative or absolute, and load GPU initial state by lri to context mmio INSTPM (GEN8) or 0x20D8 (>=GEN9). Mesa Commit fa8a764b62 ("i965: Use absolute addressing for constant buffer 0 on Kernel 4.16+.") INSTPM is already added to gen8_engine_mmio_list, but 0x20D8 is missed in gen9_engine_mmio_list. From GVT point of view, different guest could have different context so should switch those mmio accordingly. v2: Update fixes commit ID. Fixes: 17865713 ("drm/i915/gvt: vGPU context switch") Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Colin Xu <colin.xu@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> (cherry picked from commit 1e8b15a1)
-
- 03 May, 2019 6 commits
-
-
Robin Murphy authored
Re-reading the feature registers for the sake of displaying the raw values seems pointless, and in fact showing the copies that we've already read and stored is arguably more useful in terms of giving exposure to any potential bugs in that part of the process. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/ce5e414adb008baeed9e2ceb9c88f28d5c74ea42.1556195258.git.robin.murphy@arm.com
-
Robin Murphy authored
Probe deferral is far from "fatal". Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/b6ff1f18ac0612f29fd2e3336d6663b7e02db572.1556195258.git.robin.murphy@arm.com
-
Robin Murphy authored
Make sure to disable runtime PM again if probe fails after we've enabled it. Otherwise, any subsequent attempt to re-probe starts triggering "Unbalanced pm_runtime_enable!" assertions from the driver core. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/2487391e7646cabbc52e9b4c20182e39d3f61859.1556195258.git.robin.murphy@arm.com
-
Robin Murphy authored
The DMA masks need to be set correctly before any DMA API activity kicks off, and the current point in panfrost_probe() is way too late in that regard. since panfrost_mmu_init() has already set up a live address space and DMA-mapped MMU pagetables. We can't set masks until we've queried the appropriate value from MMU_FEATURES, but as soon as reasonably possible after that should suffice. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/64361b929a5c61d2ab9580262ecb3d369164cfcb.1556195258.git.robin.murphy@arm.com
-
Tomeu Vizoso authored
So userspace can get feedback on any error conditions, instead of going ahead and things breaking later. Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190424131355.62817-1-tomeu.vizoso@collabora.com
-
Sean Paul authored
Merging some panfrost fixes as well as one rockchip fix that _just_ missed feature freeze. Signed-off-by:
Sean Paul <seanpaul@chromium.org>
-