Pull tty fix from Greg KH:
 "Here is a single revert for a much-reported regression in 6.10-rc1
  when it comes to a few older architectures.

  Turns out that the VT ioctls don't work the same across all cpu types
  because of some old compatibility requrements for stuff like alpha and
  powerpc. So revert the change that attempted to have them use the
  _IO() macros and go back to the known-working values instead.

  This has NOT been in linux-next but has had many reports that it fixes
  the issue with 6.10-rc1"

* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "VT: Use macros to define ioctls"

Pull landlock fix from Mickaël Salaün:
 "This fixes a wrong path walk triggered by syzkaller"

* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/landlock: Add layout1.refer_mount_root
  landlock: Fix d_parent walk

This reverts commit 8c467f33.

Turns out this breaks many architectures as the vt ioctls do not all
match up everywhere due to historical reasons, so the original commit is
invalid for many values.
Reported-by: Nick Bowler <nbowler@draconx.ca>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Gladkov <legion@kernel.org>
Link: https://lore.kernel.org/r/ad4e561c-1d49-4f25-882c-7a36c6b1b5c0@draconx.ca
Link: https://lore.kernel.org/r/0da9785e-ba44-4718-9d08-4e96c1ba7ab2@kernel.org
Link: https://lore.kernel.org/all/34d848f4-670b-4493-bf21-130ef862521b@xenosoft.de/Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull drm fixes from Dave Airlie:
 "This is the weekly fixes. Lots of small fixes across the board, one
  BUG_ON fix in shmem seems most important, otherwise amdgpu, i915, xe
  mostly with small fixes to all the other drivers.

  shmem:
   - fix BUG_ON in COW handling
   - warn when trying to pin imported objects

  buddy:
   - fix page size handling

  dma-buf:
   - sw-sync: Don't interfere with IRQ handling
   - fix kthreads-handling error path

  i915:
   - fix a race in audio component by registering it later
   - make DPT object unshrinkable to avoid shrinking when framebuffer
     has not shrunk
   - fix CCS id calculation to fix a perf regression
   - fix selftest caching mode
   - fix FIELD_PREP compiler warnings
   - fix indefinite wait for GT wakeref release
   - revert overeager multi-gt pm reference removal

  xe:
   - pcode polling timeout change
   - fix for deadlocks for faulting VMs
   - error-path lock imbalance fix

  amdgpu:
   - RAS fix
   - fix colorspace property for MST connectors
   - fix for PCIe DPM
   - silence UBSAN warning
   - GPUVM robustness fix
   - partition fix
   - drop deprecated I2C_CLASS_SPD

  amdkfd:
   - revert unused changes for certain 11.0.3 devices
   - simplify APU VRAM handling

  lima:
   - fix dma_resv-related deadlock in object pin

  msm:
   - remove build-time dependency on Python 3.9

  nouveau:
   - nvif: Fix possible integer overflow

  panel:
   - lg-sw43408: Select DP helpers; Declare backlight ops as static
   - sitronix-st7789v: Various fixes for jt240mhqs_hwt_ek_e3 panel

  panfrost:
   - fix dma_resv-related deadlock in object pin"

* tag 'drm-fixes-2024-06-01' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
  drm/msm: remove python 3.9 dependency for compiling msm
  drm/panel: sitronix-st7789v: fix display size for jt240mhqs_hwt_ek_e3 panel
  drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel
  drm/panel: sitronix-st7789v: fix timing for jt240mhqs_hwt_ek_e3 panel
  drm/amd/pm: remove deprecated I2C_CLASS_SPD support from newly added SMU_14_0_2
  drm/amdgpu: Make CPX mode auto default in NPS4
  drm/amdkfd: simplify APU VRAM handling
  Revert "drm/amdkfd: fix gfx_target_version for certain 11.0.3 devices"
  drm/amdgpu: fix dereference null return value for the function amdgpu_vm_pt_parent
  drm/amdgpu: silence UBSAN warning
  drm/amdgpu: Adjust logic in amdgpu_device_partner_bandwidth()
  drm/i915: Fix audio component initialization
  drm/i915/dpt: Make DPT object unshrinkable
  drm/i915/gt: Fix CCS id's calculation for CCS mode setting
  drm/panel/lg-sw43408: mark sw43408_backlight_ops as static
  drm/i915/selftests: Set always_coherent to false when reading from CPU
  drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER
  drm/i915/guc: avoid FIELD_PREP warning
  drm/i915/gt: Disarm breadcrumbs if engines are already idle
  Revert "drm/i915: Remove extra multi-gt pm-references"
  ...

Merge tag 'hwmon-for-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - sttcs: Fix property spelling

 - intel-m10-bmc-hwmon: Fix multiplier for N6000 board power sensor

 - ltc2992: Fix memory leak

 - dell-smm: Add Dell G15 5511 to fan control whitelist

* tag 'hwmon-for-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (shtc1) Fix property misspelling
  hwmon: (intel-m10-bmc-hwmon) Fix multiplier for N6000 board power sensor
  hwmon: (ltc2992) Fix memory leak in ltc2992_parse_dt()
  hwmon: (dell-smm) Add Dell G15 5511 to fan control whitelist

Merge tag 'mailbox-fixes-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox

Pull mailbox fix from Jassi Brar:

 - zynqmp-ipi: fix linker error on some configurations

* tag 'mailbox-fixes-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
  mailbox: zynqmp-ipi: drop irq_to_desc() call

Pull spi fixes from Mark Brown:
 "A series of fixes that came in since the merge window, the main thing
  being the fixes Andy did for DMA sync where we were calling into the
  DMA API in suprising ways and causing issues as a result, the main
  thing being confusing the IOMMU code.

  We've also got some fairly important fixes for the stm32 driver, it
  supports a wide range of hardware and some optimisations that were
  done recently have broken on some systems, and a fix to prevent
  glitched signals on the bus in the cadence driver"

* tag 'spi-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: stm32: Don't warn about spurious interrupts
  spi: Assign dummy scatterlist to unidirectional transfers
  spi: cadence: Ensure data lines set to low during dummy-cycle period
  spi: stm32: Revert change that enabled controller before asserting CS
  spi: Check if transfer is mapped before calling DMA sync APIs
  spi: Don't mark message DMA mapped when no transfer in it is

Merge tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One fix that came in since -rc1, fixing misuse of a local variable in
  the DT parsing code in the RTQ2208 driver"

* tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: rtq2208: Fix invalid memory access when devm_of_regulator_put_matches is called

Pull regmap fix from Mark Brown:
 "The I2C bus was not taking account of the register and any padding
  bytes when handling maximum write sizes supported by an I2C adaptor,
  this patch from Jim Wylder fixes that"

* tag 'regmap-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-i2c: Subtract reg size from max_write

Pull block fixes from Jens Axboe:

 - NVMe fixes via Keith:
      - Removing unused fields (Kanchan)
      - Large folio offsets support (Kundan)
      - Multipath NUMA node initialiazation fix (Nilay)
      - Multipath IO stats accounting fixes (Keith)
      - Circular lockdep fix (Keith)
      - Target race condition fix (Sagi)
      - Target memory leak fix (Sagi)

 - bcache fixes

 - null_blk fixes (Damien)

 - Fix regression in io.max due to throttle low removal (Waiman)

 - DM limit table fixes (Christoph)

 - SCSI and block limit fixes (Christoph)

 - zone fixes (Damien)

 - Misc fixes (Christoph, Hannes, hexue)

* tag 'block-6.10-20240530' of git://git.kernel.dk/linux: (25 commits)
  blk-throttle: Fix incorrect display of io.max
  block: Fix zone write plugging handling of devices with a runt zone
  block: Fix validation of zoned device with a runt zone
  null_blk: Do not allow runt zone with zone capacity smaller then zone size
  nvmet: fix a possible leak when destroy a ctrl during qp establishment
  nvme: use srcu for iterating namespace list
  bcache: code cleanup in __bch_bucket_alloc_set()
  bcache: call force_wake_up_gc() if necessary in check_should_bypass()
  bcache: allow allocator to invalidate bucket in gc
  block: check for max_hw_sectors underflow
  block: stack max_user_sectors
  sd: also set max_user_sectors when setting max_sectors
  null_blk: Print correct max open zones limit in null_init_zoned_dev()
  block: delete redundant function declaration
  null_blk: Fix return value of nullb_device_power_store()
  dm: make dm_set_zones_restrictions work on the queue limits
  dm: remove dm_check_zoned
  dm: move setting zoned_enabled to dm_table_set_restrictions
  block: remove blk_queue_max_integrity_segments
  nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
  ...

Pull io_uring fixes from Jens Axboe:
 "A couple of minor fixes for issues introduced in the 6.10 merge window:

   - Ensure that all read/write ops have an appropriate cleanup handler
     set (Breno)

   - Regression for applications still doing multiple mmaps even if
     FEAT_SINGLE_MMAP is set (me)

   - Move kmsg inquiry setting above any potential failure point,
     avoiding a spurious NONEMPTY flag setting on early error (me)"

* tag 'io_uring-6.10-20240530' of git://git.kernel.dk/linux:
  io_uring/net: assign kmsg inq/flags before buffer selection
  io_uring/rw: Free iovec before cleaning async data
  io_uring: don't attempt to mmap larger than what the user asks for

Pull dma-mapping fixes from Christoph Hellwig:

 - dma-mapping benchmark error handling fixes (Fedor Pchelkin)

 - correct a config symbol reference in the DMA API documentation (Lukas
   Bulwahn)

* tag 'dma-mapping-6.10-2024-05-31' of git://git.infradead.org/users/hch/dma-mapping:
  Documentation/core-api: correct reference to SWIOTLB_DYNAMIC
  dma-mapping: benchmark: handle NUMA_NO_NODE correctly
  dma-mapping: benchmark: fix node id validation
  dma-mapping: benchmark: avoid needless copy_to_user if benchmark fails
  dma-mapping: benchmark: fix up kthread-related error handling

Pull sound fixes from Takashi Iwai:
 "Lots of small fixes:

   - A race fix for debugfs handling in ALSA core

   - A series of corrections for MIDI2 core format conversions

   - ASoC Intel fixes for 16 bit DMIC config

   - Updates for missing module parameters in ASoC code

   - HD-audio quirk, Cirrus codec fix, etc minor fixes"

* tag 'sound-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
  ALSA: seq: ump: Fix swapped song position pointer data
  ASoC: SOF: ipc4-topology: Adjust the params based on DAI formats
  ASoC: SOF: ipc4-topology: Improve readability of sof_ipc4_prepare_dai_copier()
  ASoC: SOF: ipc4-topology/pcm: Rename sof_ipc4_copier_is_single_format()
  ASoC: SOF: ipc4-topology: Print out the channel count in sof_ipc4_dbg_audio_format
  ASoC: SOF: ipc4-topology: Add support for NHLT with 16-bit only DMIC blob
  ALSA: seq: Fix yet another spot for system message conversion
  ALSA: ump: Set default protocol when not given explicitly
  ALSA: ump: Don't accept an invalid UMP protocol number
  ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension
  ASoC: Intel: sof-sdw: fix missing SPI_MASTER dependency
  ALSA: pcm: fix typo in comment
  ALSA: ump: Don't clear bank selection after sending a program change
  ALSA: seq: Fix incorrect UMP type for system messages
  ALSA/hda: intel-dsp-config: reduce log verbosity
  ALSA: seq: Don't clear bank selection at event -> UMP MIDI2 conversion
  ALSA: seq: Fix missing bank setup between MIDI1/MIDI2 UMP conversion
  ASoC: SOF: add missing MODULE_DESCRIPTION()
  ASoC: SOF: reorder MODULE_ definitions
  ASoC: SOF: AMD: group all module related information
  ...

Merge tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - a use-after-free bugfix

 - Kconfig fixes for randconfig builds

 - allow setting touchscreen_dmi quirks from the cmdline for debugging

 - touchscreen_dmi quirks for two new laptop/tablet models

* tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro
  platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet
  platform/x86: touchscreen_dmi: Add support for setting touchscreen properties from cmdline
  platform/x86: thinkpad_acpi: Select INPUT_SPARSEKMAP in Kconfig
  platform/x86: x86-android-tablets: Add "select LEDS_CLASS"
  platform/x86: ISST: fix use-after-free in tpmi_sst_dev_remove()

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix to avoid pt_regs aliasing with idle thread stacks on secondary
   harts.

 - HAVE_ARCH_HUGE_VMAP is enabled on XIP kernels, which fixes boot
   issues on XIP systems with huge pages.

 - An update to the uABI documentation clarifying that only scalar
   misaligned accesses were grandfathered in as supported, as the vector
   extension did not exist at the time the uABI was frozen.

 - A fix for the recently-added byte/half atomics to avoid losing the
   fully ordered decorations.

* tag 'riscv-for-linus-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix fully ordered LR/SC xchg[8|16]() implementations
  Documentation: RISC-V: uabi: Only scalar misaligned loads are supported
  riscv: enable HAVE_ARCH_HUGE_VMAP for XIP kernel
  riscv: prevent pt_regs corruption for secondary idle threads

Pull bcachefs fixes from Kent Overstreet:
 "Assorted odds and ends...

   - two downgrade fixes

   - a couple snapshot deletion and repair fixes, thanks to noradtux for
     finding these and providing the image to debug them

   - a couple assert fixes

   - convert to folio helper, from Matthew

   - some improved error messages

   - bit of code reorganization (just moving things around); doing this
     while things are quiet so I'm not rebasing fixes past reorgs

   - don't return -EROFS on inconsistency error in recovery, this
     confuses util-linux and has it retry the mount

   - fix failure to return error on misaligned dio write; reported as an
     issue with coreutils shred"

* tag 'bcachefs-2024-05-30' of https://evilpiepirate.org/git/bcachefs: (21 commits)
  bcachefs: Fix failure to return error on misaligned dio write
  bcachefs: Don't return -EROFS from mount on inconsistency error
  bcachefs: Fix uninitialized var warning
  bcachefs: Split out sb-errors_format.h
  bcachefs: Split out journal_seq_blacklist_format.h
  bcachefs: Split out replicas_format.h
  bcachefs: Split out disk_groups_format.h
  bcachefs: split out sb-downgrade_format.h
  bcachefs: split out sb-members_format.h
  bcachefs: Better fsck error message for key version
  bcachefs: btree_gc can now handle unknown btrees
  bcachefs: add missing MODULE_DESCRIPTION()
  bcachefs: Fix setting of downgrade recovery passes/errors
  bcachefs: Run check_key_has_snapshot in snapshot_delete_keys()
  bcachefs: Refactor delete_dead_snapshots()
  bcachefs: Fix locking assert
  bcachefs: Fix lookup_first_inode() when inode_generations are present
  bcachefs: Plumb bkey into __btree_err()
  bcachefs: Use copy_folio_from_iter_atomic()
  bcachefs: Fix sb-downgrade validation
  ...

irq_to_desc() is not exported to loadable modules, so this driver now
fails to link in some configurations:

ERROR: modpost: "irq_to_desc" [drivers/mailbox/zynqmp-ipi-mailbox.ko] undefined!

I can't see a purpose for this call, since the return value is unused
and probably left over from some code refactoring.

Address the link failure by just removing the line.

Fixes: 6ffb1635 ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

Add tests to check error codes when linking or renaming a mount root
directory.  This previously triggered a kernel warning, but it is fixed
with the previous commit.

Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20240516181935.1645983-3-mic@digikod.netSigned-off-by: Mickaël Salaün <mic@digikod.net>

The WARN_ON_ONCE() in collect_domain_accesses() can be triggered when
trying to link a root mount point.  This cannot work in practice because
this directory is mounted, but the VFS check is done after the call to
security_path_link().

Do not use source directory's d_parent when the source directory is the
mount point.

Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: stable@vger.kernel.org
Reported-by: syzbot+bf4903dc7e12b18ebc87@syzkaller.appspotmail.com
Fixes: b91c3e4e ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Closes: https://lore.kernel.org/r/000000000000553d3f0618198200@google.com
Link: https://lore.kernel.org/r/20240516181935.1645983-2-mic@digikod.net
[mic: Fix commit message]
Signed-off-by: Mickaël Salaün <mic@digikod.net>

At converting between the legacy event and UMP, the parameters for
MIDI Song Position Pointer are incorrectly stored.  It should have
been LSB -> MSB order while it stored in MSB -> LSB order.
This patch corrects the ordering.

Fixes: e9e02819 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240531075110.3250-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'drm-misc-fixes-2024-05-30' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

Short summary of fixes pull:

dma-buf:
- sw-sync: Don't interfere with IRQ handling
- Fix kthreads-handling error path

gem-shmem:
- Warn when trying to pin imported objects

lima:
- Fix dma_resv-related deadlock in object pin

msm:
- Remove build-time dependency on Python 3.9

nouveau:
- nvif: Fix possible integer overflow

panel:
- lg-sw43408: Select DP helpers; Declare backlight ops as static
- sitronix-st7789v: Various fixes for jt240mhqs_hwt_ek_e3 panel

panfrost:
- Fix dma_resv-related deadlock in object pin
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530192307.GA14809@localhost.localdomain

Commit bf20ab53 ("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW")
attempts to revert the code change introduced by commit cd5ab1b0
("blk-throttle: add .low interface").  However, it leaves behind the
bps_conf[] and iops_conf[] fields in the throtl_grp structure which
aren't set anywhere in the new blk-throttle.c code but are still being
used by tg_prfill_limit() to display the limits in io.max. Now io.max
always displays the following values if a block queue is used:

	<m>:<n> rbps=0 wbps=0 riops=0 wiops=0

Fix this problem by removing bps_conf[] and iops_conf[] and use bps[]
and iops[] instead to complete the revert.

Fixes: bf20ab53 ("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW")
Reported-by: Justin Forbes <jforbes@redhat.com>
Closes: https://github.com/containers/podman/issues/22701#issuecomment-2120627789Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240530134547.970075-1-longman@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'amd-drm-fixes-6.10-2024-05-30' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.10-2024-05-30:

amdgpu:
- RAS fix
- Fix colorspace property for MST connectors
- Fix for PCIe DPM
- Silence UBSAN warning
- GPUVM robustness fix
- Partition fix
- Drop deprecated I2C_CLASS_SPD

amdkfd:
- Revert unused changes for certain 11.0.3 devices
- Simplify APU VRAM handling
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530202316.2246826-1-alexander.deucher@amd.com

Driver Changes:
- One pcode polling timeout change
- One fix for deadlocks for faulting VMs
- One error-path lock imbalance fix
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZlisNHzgoq9nVg6g@fedora

Merge tag 'drm-intel-fixes-2024-05-30' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes

drm/i915 fixes for v6.10-rc2:
- Fix a race in audio component by registering it later
- Make DPT object unshrinkable to avoid shrinking when framebuffer has
  not shrunk
- Fix CCS id calculation to fix a perf regression
- Fix selftest caching mode
- Fix FIELD_PREP compiler warnings
- Fix indefinite wait for GT wakeref release
- Revert overeager multi-gt pm reference removal
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a5k7iwod.fsf@intel.com

A zoned device may have a last sequential write required zone that is
smaller than other zones. However, all tests to check if a zone write
plug write offset exceeds the zone capacity use the same capacity
value stored in the gendisk zone_capacity field. This is incorrect for a
zoned device with a last runt (smaller) zone.

Add the new field last_zone_capacity to struct gendisk to store the
capacity of the last zone of the device. blk_revalidate_seq_zone() and
blk_revalidate_conv_zone() are both modified to get this value when
disk_zone_is_last() returns true. Similarly to zone_capacity, the value
is first stored using the last_zone_capacity field of struct
blk_revalidate_zone_args. Once zone revalidation of all zones is done,
this is used to set the gendisk last_zone_capacity field.

The checks to determine if a zone is full or if a sector offset in a
zone exceeds the zone capacity in disk_should_remove_zone_wplug(),
disk_zone_wplug_abort_unaligned(), blk_zone_write_plug_init_request(),
and blk_zone_wplug_prepare_bio() are modified to use the new helper
functions disk_zone_is_full() and disk_zone_wplug_is_full().
disk_zone_is_full() uses the zone index to determine if the zone being
tested is the last one of the disk and uses the either the disk
zone_capacity or last_zone_capacity accordingly.

Fixes: dd291d77 ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240530054035.491497-4-dlemoal@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Commit ecfe43b1 ("block: Remember zone capacity when revalidating
zones") introduced checks to ensure that the capacity of the zones of
a zoned device is constant for all zones. However, this check ignores
the possibility that a zoned device has a smaller last zone with a size
not equal to the capacity of other zones. Such device correspond in
practice to an SMR drive with a smaller last zone and all zones with a
capacity equal to the zone size, leading to the last zone capacity being
different than the capacity of other zones.

Correctly handle such device by fixing the check for the constant zone
capacity in blk_revalidate_seq_zone() using the new helper function
disk_zone_is_last(). This helper function is also used in
blk_revalidate_zone_cb() when checking the zone size.

Fixes: ecfe43b1 ("block: Remember zone capacity when revalidating zones")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240530054035.491497-3-dlemoal@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

A zoned device with a smaller last zone together with a zone capacity
smaller than the zone size does make any sense as that does not
correspond to any possible setup for a real device:
1) For ZNS and zoned UFS devices, all zones are always the same size.
2) For SMR HDDs, all zones always have the same capacity.
In other words, if we have a smaller last runt zone, then this zone
capacity should always be equal to the zone size.

Add a check in null_init_zoned_dev() to prevent a configuration to have
both a smaller zone size and a zone capacity smaller than the zone size.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240530054035.491497-2-dlemoal@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

syzbot reports that recv is using an uninitialized value:

=====================================================
BUG: KMSAN: uninit-value in io_req_cqe_overflow io_uring/io_uring.c:810 [inline]
BUG: KMSAN: uninit-value in io_req_complete_post io_uring/io_uring.c:937 [inline]
BUG: KMSAN: uninit-value in io_issue_sqe+0x1f1b/0x22c0 io_uring/io_uring.c:1763
 io_req_cqe_overflow io_uring/io_uring.c:810 [inline]
 io_req_complete_post io_uring/io_uring.c:937 [inline]
 io_issue_sqe+0x1f1b/0x22c0 io_uring/io_uring.c:1763
 io_wq_submit_work+0xa17/0xeb0 io_uring/io_uring.c:1860
 io_worker_handle_work+0xc04/0x2000 io_uring/io-wq.c:597
 io_wq_worker+0x447/0x1410 io_uring/io-wq.c:651
 ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Uninit was stored to memory at:
 io_req_set_res io_uring/io_uring.h:215 [inline]
 io_recv_finish+0xf10/0x1560 io_uring/net.c:861
 io_recv+0x12ec/0x1ea0 io_uring/net.c:1175
 io_issue_sqe+0x429/0x22c0 io_uring/io_uring.c:1751
 io_wq_submit_work+0xa17/0xeb0 io_uring/io_uring.c:1860
 io_worker_handle_work+0xc04/0x2000 io_uring/io-wq.c:597
 io_wq_worker+0x447/0x1410 io_uring/io-wq.c:651
 ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Uninit was created at:
 slab_post_alloc_hook mm/slub.c:3877 [inline]
 slab_alloc_node mm/slub.c:3918 [inline]
 __do_kmalloc_node mm/slub.c:4038 [inline]
 __kmalloc+0x6e4/0x1060 mm/slub.c:4052
 kmalloc include/linux/slab.h:632 [inline]
 io_alloc_async_data+0xc0/0x220 io_uring/io_uring.c:1662
 io_msg_alloc_async io_uring/net.c:166 [inline]
 io_recvmsg_prep_setup io_uring/net.c:725 [inline]
 io_recvmsg_prep+0xbe8/0x1a20 io_uring/net.c:806
 io_init_req io_uring/io_uring.c:2135 [inline]
 io_submit_sqe io_uring/io_uring.c:2182 [inline]
 io_submit_sqes+0x1135/0x2f10 io_uring/io_uring.c:2335
 __do_sys_io_uring_enter io_uring/io_uring.c:3246 [inline]
 __se_sys_io_uring_enter+0x40f/0x3c80 io_uring/io_uring.c:3183
 __x64_sys_io_uring_enter+0x11f/0x1a0 io_uring/io_uring.c:3183
 x64_sys_call+0x2c0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:427
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

which appears to be io_recv_finish() reading kmsg->msg.msg_inq to decide
if it needs to set IORING_CQE_F_SOCK_NONEMPTY or not. If the recv is
entered with buffer selection, but no buffer is available, then we jump
error path which calls io_recv_finish() without having assigned
kmsg->msg_inq. This might cause an errant setting of the NONEMPTY flag
for a request get gets errored with -ENOBUFS.

Reported-by: syzbot+b1647099e82b3b349fbf@syzkaller.appspotmail.com
Fixes: 4a3223f7 ("io_uring/net: switch io_recv() to using io_async_msghdr")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'asoc-fix-v6.10-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.10

Several serieses of fixes that have come in since the merge window,
mostly for Intel systems.  The biggest thing is some updates from Peter
which fix support for a series of Intel laptops which have been found to
use 16 bit rather than 32 bit DMIC configuration blobs in their firmware
descriptions.  We also have a bunch of fixes for module annotations, and
some smaller single patch fixes.

Since commit 5acf4911 ("drm/msm: import gen_header.py script from Mesa"),
compilation is broken on machines having python versions older than 3.9
due to dependency on argparse.BooleanOptionalAction.

Switch to use simple bool for the validate flag to remove the dependency.

Fixes: 5acf4911 ("drm/msm: import gen_header.py script from Mesa")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240507230440.3384949-1-quic_abhinavk@quicinc.com

The fully ordered versions of xchg[8|16]() using LR/SC lack the
necessary memory barriers to guarantee the order.

Fix this by matching what is already implemented in the fully ordered
versions of cmpxchg() using LR/SC.
Suggested-by: Andrea Parri <parri.andrea@gmail.com>
Reported-by: Andrea Parri <parri.andrea@gmail.com>
Closes: https://lore.kernel.org/linux-riscv/ZlYbupL5XgzgA0MX@andrea/T/#u
Fixes: a8ed2b7a ("riscv/cmpxchg: Implement xchg for variables of size 1 and 2")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240530145546.394248-1-alexghiti@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

We're stuck supporting scalar misaligned loads in userspace because they
were part of the ISA at the time we froze the uABI.  That wasn't the
case for vector misaligned accesses, so depending on them
unconditionally is a userspace bug.  All extant vector hardware traps on
these misaligned accesses.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240524185600.5919-1-palmer@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

HAVE_ARCH_HUGE_VMAP also works on XIP kernel, so remove its dependency on
!XIP_KERNEL.

This also fixes a boot problem for XIP kernel introduced by the commit in
"Fixes:". This commit used huge page mapping for vmemmap, but huge page
vmap was not enabled for XIP kernel.

Fixes: ff172d48 ("riscv: Use hugepage mappings for vmemmap")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: <stable@vger.kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240526110104.470429-1-namcao@linutronix.deSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Top of the kernel thread stack should be reserved for pt_regs. However
this is not the case for the idle threads of the secondary boot harts.
Their stacks overlap with their pt_regs, so both may get corrupted.

Similar issue has been fixed for the primary hart, see c7cdd96e
("riscv: prevent stack corruption by reserving task_pt_regs(p) early").
However that fix was not propagated to the secondary harts. The problem
has been noticed in some CPU hotplug tests with V enabled. The function
smp_callin stored several registers on stack, corrupting top of pt_regs
structure including status field. As a result, kernel attempted to save
or restore inexistent V context.

Fixes: 9a2451f1 ("RISC-V: Avoid using per cpu array for ordered booting")
Fixes: 2875fe05 ("RISC-V: Add cpu_ops and modify default booting method")
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240523084327.2013211-1-geomatsi@gmail.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The property name is "sensirion,low-precision", not
"sensicon,low-precision".

Cc: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Fixes: be7373b6 ("hwmon: shtc1: add support for device tree bindings")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The Intel N6000 BMC outputs the board power value in milliwatt, whereas
the hwmon sysfs interface must provide power values in microwatt.

Fixes: e1983220 ("hwmon: intel-m10-bmc-hwmon: Add N6000 sensors")
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Link: https://lore.kernel.org/r/20240521181246.683833-1-peter.colberg@intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - gro: initialize network_offset in network layer

   - tcp: reduce accepted window in NEW_SYN_RECV state

  Current release - new code bugs:

   - eth: mlx5e: do not use ptp structure for tx ts stats when not
     initialized

   - eth: ice: check for unregistering correct number of devlink params

  Previous releases - regressions:

   - bpf: Allow delete from sockmap/sockhash only if update is allowed

   - sched: taprio: extend minimum interval restriction to entire cycle
     too

   - netfilter: ipset: add list flush to cancel_gc

   - ipv4: fix address dump when IPv4 is disabled on an interface

   - sock_map: avoid race between sock_map_close and sk_psock_put

   - eth: mlx5: use mlx5_ipsec_rx_status_destroy to correctly delete
     status rules

  Previous releases - always broken:

   - core: fix __dst_negative_advice() race

   - bpf:
       - fix multi-uprobe PID filtering logic
       - fix pkt_type override upon netkit pass verdict

   - netfilter: tproxy: bail out if IP has been disabled on the device

   - af_unix: annotate data-race around unix_sk(sk)->addr

   - eth: mlx5e: fix UDP GSO for encapsulated packets

   - eth: idpf: don't enable NAPI and interrupts prior to allocating Rx
     buffers

   - eth: i40e: fully suspend and resume IO operations in EEH case

   - eth: octeontx2-pf: free send queue buffers incase of leaf to inner

   - eth: ipvlan: dont Use skb->sk in ipvlan_process_v{4,6}_outbound"

* tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  netdev: add qstat for csum complete
  ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound
  net: ena: Fix redundant device NUMA node override
  ice: check for unregistering correct number of devlink params
  ice: fix 200G PHY types to link speed mapping
  i40e: Fully suspend and resume IO operations in EEH case
  i40e: factoring out i40e_suspend/i40e_resume
  e1000e: move force SMBUS near the end of enable_ulp function
  net: dsa: microchip: fix RGMII error in KSZ DSA driver
  ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
  net: fix __dst_negative_advice() race
  nfc/nci: Add the inconsistency check between the input data length and count
  MAINTAINERS: dwmac: starfive: update Maintainer
  net/sched: taprio: extend minimum interval restriction to entire cycle too
  net/sched: taprio: make q->picos_per_byte available to fill_sched_entry()
  netfilter: nft_fib: allow from forward/input without iif selector
  netfilter: tproxy: bail out if IP has been disabled on the device
  netfilter: nft_payload: skbuff vlan metadata mangle support
  net: ti: icssg-prueth: Fix start counter for ft1 filter
  sock_map: avoid race between sock_map_close and sk_psock_put
  ...

kmemleak shows that there is a memory leak in io_uring read operation,
where a buffer is allocated at iovec import, but never de-allocated.

The memory is allocated at io_async_rw->free_iovec, but, then
io_async_rw is kfreed, taking the allocated memory with it. I saw this
happening when the read operation fails with -11 (EAGAIN).

This is the kmemleak splat.

    unreferenced object 0xffff8881da591c00 (size 256):
...
      backtrace (crc 7a15bdee):
	[<00000000256f2de4>] __kmalloc+0x2d6/0x410
	[<000000007a9f5fc7>] iovec_from_user.part.0+0xc6/0x160
	[<00000000cecdf83a>] __import_iovec+0x50/0x220
	[<00000000d1d586a2>] __io_import_iovec+0x13d/0x220
	[<0000000054ee9bd2>] io_prep_rw+0x186/0x340
	[<00000000a9c0372d>] io_prep_rwv+0x31/0x120
	[<000000001d1170b9>] io_prep_readv+0xe/0x30
	[<0000000070b8eb67>] io_submit_sqes+0x1bd/0x780
	[<00000000812496d4>] __do_sys_io_uring_enter+0x3ed/0x5b0
	[<0000000081499602>] do_syscall_64+0x5d/0x170
	[<00000000de1c5a4d>] entry_SYSCALL_64_after_hwframe+0x76/0x7e

This occurs because the async data cleanup functions are not set for
read/write operations. As a result, the potentially allocated iovec in
the rw async data is not freed before the async data is released,
leading to a memory leak.

With this following patch, kmemleak does not show the leaked memory
anymore, and all liburing tests pass.

Fixes: a9165b83 ("io_uring/rw: always setup io_async_rw for read/write requests")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240530142340.1248216-1-leitao@debian.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

The existing logic to pick a DMIC blob is based on several historical
assumptions that the NHLT in BIOS always contains 32-bits per sample
type (first patch, [1]).

The other issue with the existing logic is that it was designed to care only
about the bit depth of the format and fails to find the existing and correct
blob when rate/channels are different on the FE side compared to what we should
be using on the DAI side (we have components in path which can change
rate/channel count).

These issues have not been observed in past but with new MTL based (Windows)
laptops and new topologies to enhance the audio quality, we started to see weird
issues around how our assumptions of vendors failed.

Since some NHLT blob handling cleanup has been done for 6.10, this series will
complete that work to cover even cases that we don't anticipate to see.

[1] https://github.com/thesofproject/linux/issues/4973