- 24 Sep, 2021 4 commits
-
-
Ming Lei authored
When running ->fallocate(), blkdev_fallocate() should hold mapping->invalidate_lock to prevent page cache from being accessed, otherwise stale data may be read in page cache. Without this patch, blktests block/009 fails sometimes. With this patch, block/009 can pass always. Also as Jan pointed out, no pages can be created in the discarded area while you are holding the invalidate_lock, so remove the 2nd truncate_bdev_range(). Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210923023751.1441091-1-ming.lei@redhat.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Zhihao Cheng authored
There is an use-after-free problem triggered by following process: P1(sda) P2(sdb) echo 0 > /sys/block/sdb/trace/enable blk_trace_remove_queue synchronize_rcu blk_trace_free relay_close rcu_read_lock __blk_add_trace trace_note_tsk (Iterate running_trace_list) relay_close_buf relay_destroy_buf kfree(buf) trace_note(sdb's bt) relay_reserve buf->offset <- nullptr deference (use-after-free) !!! rcu_read_unlock [ 502.714379] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 502.715260] #PF: supervisor read access in kernel mode [ 502.715903] #PF: error_code(0x0000) - not-present page [ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0 [ 502.717252] Oops: 0000 [#1] SMP [ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360 [ 502.732872] Call Trace: [ 502.733193] __blk_add_trace.cold+0x137/0x1a3 [ 502.733734] blk_add_trace_rq+0x7b/0xd0 [ 502.734207] blk_add_trace_rq_issue+0x54/0xa0 [ 502.734755] blk_mq_start_request+0xde/0x1b0 [ 502.735287] scsi_queue_rq+0x528/0x1140 ... [ 502.742704] sg_new_write.isra.0+0x16e/0x3e0 [ 502.747501] sg_ioctl+0x466/0x1100 Reproduce method: ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sda, BLKTRACESTART) ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sdb, BLKTRACESTART) echo 0 > /sys/block/sdb/trace/enable & // Add delay(mdelay/msleep) before kernel enters blk_trace_free() ioctl$SG_IO(/dev/sda, SG_IO, ...) // Enters trace_note_tsk() after blk_trace_free() returned // Use mdelay in rcu region rather than msleep(which may schedule out) Remove blk_trace from running_list before calling blk_trace_free() by sysfs if blk_trace is at Blktrace_running state. Fixes: c71a8961 ("blktrace: add ftrace plugin") Signed-off-by:Zhihao Cheng <chengzhihao1@huawei.com> Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.comSigned-off-by:
-
Ming Lei authored
rq_qos framework is only applied on request based driver, so: 1) rq_qos_done_bio() needn't to be called for bio based driver 2) rq_qos_done_bio() needn't to be called for bio which isn't tracked, such as bios ended from error handling code. Especially in bio_endio(): 1) request queue is referred via bio->bi_bdev->bd_disk->queue, which may be gone since request queue refcount may not be held in above two cases 2) q->rq_qos may be freed in blk_cleanup_queue() when calling into __rq_qos_done_bio() Fix the potential kernel panic by not calling rq_qos_ops->done_bio if the bio isn't tracked. This way is safe because both ioc_rqos_done_bio() and blkcg_iolatency_done_bio() are nop if the bio isn't tracked. Reported-by:
Yu Kuai <yukuai3@huawei.com> Cc: tj@kernel.org Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20210924110704.1541818-1-ming.lei@redhat.comSigned-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.15: - keep ctrl->namespaces ordered (me) - fix incorrect h2cdata pdu offset accounting in nvme-tcp (Sagi Grimberg) - handled updated hw_queues in nvme-fc more carefully (Daniel Wagner, James Smart)" * tag 'nvme-5.15-2021-09-24' of git://git.infradead.org/nvme: nvme: keep ctrl->namespaces ordered nvme-tcp: fix incorrect h2cdata pdu offset accounting nvme-fc: remove freeze/unfreeze around update_nr_hw_queues nvme-fc: avoid race between time out and tear down nvme-fc: update hardware queues before using them
-
- 22 Sep, 2021 2 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/song/mdJens Axboe authored
Pull MD fix from Song. * 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: fix a lock order reversal in md_alloc
-
Christoph Hellwig authored
Commit b0140891 ("md: Fix race when creating a new md device.") not only moved assigning mddev->gendisk before calling add_disk, which fixes the races described in the commit log, but also added a mddev->open_mutex critical section over add_disk and creation of the md kobj. Adding a kobject after add_disk is racy vs deleting the gendisk right after adding it, but md already prevents against that by holding a mddev->active reference. On the other hand taking this lock added a lock order reversal with what is not disk->open_mutex (used to be bdev->bd_mutex when the commit was added) for partition devices, which need that lock for the internal open for the partition scan, and a recent commit also takes it for non-partitioned devices, leading to further lockdep splatter. Fixes: b0140891 ("md: Fix race when creating a new md device.") Fixes: d6263387 ("block: support delayed holder registration") Reported-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Song Liu <songliubraving@fb.com>
-
- 21 Sep, 2021 5 commits
-
-
Christoph Hellwig authored
Various places in the nvme code that rely on ctrl->namespace to be ordered. Ensure that the namespae is inserted into the list at the right position from the start instead of sorting it after the fact. Fixes: 540c801c ("NVMe: Implement namespace list scanning") Reported-by:
Anton Eidelman <anton.eidelman@gmail.com> Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com>
-
Sagi Grimberg authored
When the controller sends us multiple r2t PDUs in a single request we need to account for it correctly as our send/recv context run concurrently (i.e. we get a new r2t with r2t_offset before we updated our iterator and req->data_sent marker). This can cause wrong offsets to be sent to the controller. To fix that, we will first know that this may happen only in the send sequence of the last page, hence we will take the r2t_offset to the h2c PDU data_offset, and in nvme_tcp_try_send_data loop, we make sure to increment the request markers also when we completed a PDU but we are expecting more r2t PDUs as we still did not send the entire data of the request. Fixes: 825619b0 ("nvme-tcp: fix possible use-after-completion") Reported-by:
Nowak, Lukasz <Lukasz.Nowak@Dell.com> Tested-by:
-
James Smart authored
Remove the freeze/unfreeze around changes to the number of hardware queues. Study and retest has indicated there are no ios that can be active at this point so there is nothing to freeze. nvme-fc is draining the queues in the shutdown and error recovery path in __nvme_fc_abort_outstanding_ios. This patch primarily reverts 88e837ed "nvme-fc: wait for queues to freeze before calling update_hr_hw_queues". It's not an exact revert as it leaves the adjusting of hw queues only if the count changes. Signed-off-by:
James Smart <jsmart2021@gmail.com> [dwagner: added explanation why no IO is pending] Signed-off-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
James Smart authored
To avoid race between time out and tear down, in tear down process, first we quiesce the queue, and then delete the timer and cancel the time out work for the queue. This patch merges the admin and io sync ops into the queue teardown logic as shown in the RDMA patch 3017013d "nvme-rdma: avoid race between time out and tear down". There is no teardown_lock in nvme-fc. Signed-off-by:
-
Daniel Wagner authored
In case the number of hardware queues changes, we need to update the tagset and the mapping of ctx to hctx first. If we try to create and connect the I/O queues first, this operation will fail (target will reject the connect call due to the wrong number of queues) and hence we bail out of the recreate function. Then we will to try the very same operation again, thus we don't make any progress. Signed-off-by:
-
- 15 Sep, 2021 6 commits
-
-
Li Jinlin authored
KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000 [693354.108278] page dumped because: kasan: bad access detected [693354.108511] Memory state around the buggy address: [693354.108671] ffff888be0a35500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [693354.116396] ffff888be0a35580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.124473] >ffff888be0a35600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.132421] ^ [693354.140284] ffff888be0a35680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.147912] ffff888be0a35700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.155281] ================================================================== blkgs are protected by both queue and blkcg locks and holding either should stabilize them. However, the path of destroying blkg policy data is only protected by queue lock in blkcg_activate_policy()/blkcg_deactivate_policy(). Other tasks can get the blkg policy data before the blkg policy data is destroyed, and use it after destroyed, which will result in a use-after-free. CPU0 CPU1 blkcg_deactivate_policy spin_lock_irq(&q->queue_lock) bfq_io_set_weight_legacy spin_lock_irq(&blkcg->lock) blkg_to_bfqg(blkg) pd_to_bfqg(blkg->pd[pol->plid]) ^^^^^^blkg->pd[pol->plid] != NULL bfqg != NULL pol->pd_free_fn(blkg->pd[pol->plid]) pd_to_bfqg(blkg->pd[pol->plid]) bfqg_put(bfqg) kfree(bfqg) blkg->pd[pol->plid] = NULL spin_unlock_irq(q->queue_lock); bfq_group_set_weight(bfqg, val, 0) bfqg->entity.new_weight ^^^^^^trigger uaf here spin_unlock_irq(&blkcg->lock); Fix by grabbing the matching blkcg lock before trying to destroy blkg policy data. Suggested-by:Li Jinlin <lijinlin3@huawei.com> Acked-by:
-
Yanfei Xu authored
BUG: memory leak unreferenced object 0xffff888129acdb80 (size 96): comm "syz-executor.1", pid 12661, jiffies 4294962682 (age 15.220s) hex dump (first 32 bytes): 20 47 c9 85 ff ff ff ff 20 d4 8e 29 81 88 ff ff G...... ..).... 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff82264ec8>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff82264ec8>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff82264ec8>] blk_iolatency_init+0x28/0x190 block/blk-iolatency.c:724 [<ffffffff8225b8c4>] blkcg_init_queue+0xb4/0x1c0 block/blk-cgroup.c:1185 [<ffffffff822253da>] blk_alloc_queue+0x22a/0x2e0 block/blk-core.c:566 [<ffffffff8223b175>] blk_mq_init_queue_data block/blk-mq.c:3100 [inline] [<ffffffff8223b175>] __blk_mq_alloc_disk+0x25/0xd0 block/blk-mq.c:3124 [<ffffffff826a9303>] loop_add+0x1c3/0x360 drivers/block/loop.c:2344 [<ffffffff826a966e>] loop_control_get_free drivers/block/loop.c:2501 [inline] [<ffffffff826a966e>] loop_control_ioctl+0x17e/0x2e0 drivers/block/loop.c:2516 [<ffffffff81597eec>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff81597eec>] __do_sys_ioctl fs/ioctl.c:874 [inline] [<ffffffff81597eec>] __se_sys_ioctl fs/ioctl.c:860 [inline] [<ffffffff81597eec>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 [<ffffffff843fa745>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff843fa745>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Once blk_throtl_init() queue init failed, blkcg_iolatency_exit() will not be invoked for cleanup. That leads a memory leak. Swap the blk_throtl_init() and blk_iolatency_init() calls can solve this. Reported-by: syzbot+01321b15cc98e6bf96d6@syzkaller.appspotmail.com Fixes: 19688d7f (block/blk-cgroup: Swap the blk_throtl_init() and blk_iolatency_init() calls) Signed-off-by:Yanfei Xu <yanfei.xu@windriver.com> Acked-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.15 - fix ANA state updates when a namespace is not present (Anton Eidelman) - nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show (Dan Carpenter) - avoid race in shutdown namespace removal (Daniel Wagner) - fix io_work priority inversion in nvme-tcp (Keith Busch) - destroy cm id before destroy qp to avoid use after free (Ruozhu Li)" * tag 'nvme-5.15-2021-09-15' of git://git.infradead.org/nvme: nvme-tcp: fix io_work priority inversion nvme-rdma: destroy cm id before destroy qp to avoid use after free nvme-multipath: fix ANA state updates when a namespace is not present nvme: avoid race in shutdown namespace removal nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()
-
Christoph Hellwig authored
There is no need to explicitly unregister the integrity profile when deleting the gendisk. Signed-off-by:
-
Lihong Kou authored
When the integrity profile is unregistered there can still be integrity reads queued up which could see a NULL verify_fn as shown by the race window below: CPU0 CPU1 process_one_work nvme_validate_ns bio_integrity_verify_fn nvme_update_ns_info nvme_update_disk_info blk_integrity_unregister ---set queue->integrity as 0 bio_integrity_process --access bi->profile->verify_fn(bi is a pointer of queue->integity) Before calling blk_integrity_unregister in nvme_update_disk_info, we must make sure that there is no work item in the kintegrityd_wq. Just call blk_flush_integrity to flush the work queue so the bug can be resolved. Signed-off-by:Lihong Kou <koulihong@huawei.com> [hch: split up and shortened the changelog] Signed-off-by:
-
Christoph Hellwig authored
While clearing the profile itself is harmless, we really should not clear the stable writes flag if it wasn't set due to a registered integrity profile. Reported-by:
-
- 14 Sep, 2021 3 commits
-
-
Keith Busch authored
Dispatching requests inline with the .queue_rq() call may block while holding the send_mutex. If the tcp io_work also happens to schedule, it may see the req_list is non-empty, leaving "pending" true and remaining in TASK_RUNNING. Since io_work is of higher scheduling priority, the .queue_rq task may not get a chance to run, blocking forward progress and leading to io timeouts. Instead of checking for pending requests within io_work, let the queueing restart io_work outside the send_mutex lock if there is more work to be done. Fixes: a0fdd141 ("nvme-tcp: rerun io_work if req_list is not empty") Reported-by:
Samuel Jones <sjones@kalrayinc.com> Signed-off-by:
-
Ruozhu Li authored
We should always destroy cm_id before destroy qp to avoid to get cma event after qp was destroyed, which may lead to use after free. In RDMA connection establishment error flow, don't destroy qp in cm event handler.Just report cm_error to upper level, qp will be destroy in nvme_rdma_alloc_queue() after destroy cm id. Signed-off-by:
Ruozhu Li <liruozhu@huawei.com> Reviewed-by:
Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by:
-
Anton Eidelman authored
nvme_update_ana_state() has a deficiency that results in a failure to properly update the ana state for a namespace in the following case: NSIDs in ctrl->namespaces: 1, 3, 4 NSIDs in desc->nsids: 1, 2, 3, 4 Loop iteration 0: ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH. Loop iteration 1: ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH. Loop iteration 2: ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH. Where the update to the ANA state of NSID 3 is missed. To fix this increment n and retry the update with the same ns when ns->head->ns_id is higher than nsid, Signed-off-by:Anton Eidelman <anton@lightbitslabs.com> Signed-off-by:
-
- 13 Sep, 2021 3 commits
-
-
Daniel Wagner authored
When we remove the siblings entry, we update ns->head->list, hence we can't separate the removal and test for being empty. They have to be in the same critical section to avoid a race. To avoid breaking the refcounting imbalance again, add a list empty check to nvme_find_ns_head. Fixes: 5396fdac ("nvme: fix refcounting imbalance when all paths are down") Signed-off-by:
-
Dan Carpenter authored
This was intended to limit the number of characters printed from "subsys->serial" to NVMET_SN_MAX_SIZE. But accidentally the width specifier was used instead of the precision specifier so it only affects the alignment and not the number of characters printed. Fixes: f0406481 ("nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ming Lei authored
blk-mq can't run allocating driver tag and updating ->rqs[tag] atomically, meantime blk-mq doesn't clear ->rqs[tag] after the driver tag is released. So there is chance to iterating over one stale request just after the tag is allocated and before updating ->rqs[tag]. scsi_host_busy_iter() calls scsi_host_check_in_flight() to count scsi in-flight requests after scsi host is blocked, so no new scsi command can be marked as SCMD_STATE_INFLIGHT. However, driver tag allocation still can be run by blk-mq core. One request is marked as SCMD_STATE_INFLIGHT, but this request may have been kept in another slot of ->rqs[], meantime the slot can be allocated out but ->rqs[] isn't updated yet. Then this in-flight request is counted twice as SCMD_STATE_INFLIGHT. This way causes trouble in handling scsi error. Fixes the issue by not iterating over stale request. Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Reported-by:
luojiaxing <luojiaxing@huawei.com> Signed-off-by:
-
- 12 Sep, 2021 12 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Add missing fields and remove some duplicate fields when printing a perf_event_attr. - Fix hybrid config terms list corruption. - Update kernel header copies, some resulted in new kernel features being automagically added to 'perf trace' syscall/tracepoint argument id->string translators. - Add a file generated during the documentation build to .gitignore. - Add an option to build without libbfd, as some distros, like Debian consider its ABI unstable. - Add support to print a textual representation of IBS raw sample data in 'perf report'. - Fix bpf 'perf test' sample mismatch reporting - Fix passing arguments to stackcollapse report in a 'perf script' python script. - Allow build-id with trailing zeros. - Look for ImageBase in PE file to compute .text offset. * tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits) tools headers UAPI: Update tools's copy of drm.h headers tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/fs.h with the kernel sources tools headers UAPI: Sync linux/in.h copy with the kernel sources perf tools: Add an option to build without libbfd perf tools: Allow build-id with trailing zeros perf tools: Fix hybrid config terms list corruption perf tools: Factor out copy_config_terms() and free_config_terms() perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields perf tools: Ignore Documentation dependency file perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions tools include UAPI: Update linux/mount.h copy perf beauty: Cover more flags in the move_mount syscall argument beautifier tools headers UAPI: Sync linux/prctl.h with the kernel sources tools include UAPI: Sync sound/asound.h copy with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources perf report: Add support to print a textual representation of IBS raw sample data perf report: Add tools/arch/x86/include/asm/amd-ibs.h perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings ...
-
git://github.com/ojeda/linuxLinus Torvalds authored
Pull compiler attributes updates from Miguel Ojeda: - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver) - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers) - Move __compiletime_{error|warning} (Nick Desaulniers) * tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux: compiler_attributes.h: move __compiletime_{error|warning} MAINTAINERS: add Nick as Reviewer for compiler_attributes.h Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4 -
git://github.com/ojeda/linuxLinus Torvalds authored
Pull auxdisplay updates from Miguel Ojeda: "An assortment of improvements for auxdisplay: - Replace symbolic permissions with octal permissions (Jinchao Wang) - ks0108: Switch to use module_parport_driver() (Andy Shevchenko) - charlcd: Drop unneeded initializers and switch to C99 style (Andy Shevchenko) - hd44780: Fix oops on module unloading (Lars Poeschel) - Add I2C gpio expander example (Ralf Schlatterbeck)" * tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux: auxdisplay: Replace symbolic permissions with octal permissions auxdisplay: ks0108: Switch to use module_parport_driver() auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style auxdisplay: hd44780: Fix oops on module unloading auxdisplay: Add I2C gpio expander example -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull CPU hotplug updates from Thomas Gleixner: "Updates for the SMP and CPU hotplug: - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the original hotplug code and now causing trouble with the ARM64 cache topology setup due to the pointless SMP function call. It's not longer required as the hotplug callbacks are guaranteed to be invoked on the upcoming CPU. - Remove the deprecated and now unused CPU hotplug functions - Rewrite the CPU hotplug API documentation" * tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: core-api/cpuhotplug: Rewrite the API section cpu/hotplug: Remove deprecated CPU-hotplug functions. thermal: Replace deprecated CPU-hotplug functions. drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION() -
Linus Torvalds authored
Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver fix from Greg KH: "Here is a single patch for 5.15-rc1, for the lkdtm misc driver. It resolves a build issue that many people were hitting with your current tree, and Kees and others felt would be good to get merged before -rc1 comes out, to prevent them from having to constantly hit it as many development trees restart on -rc1, not older -rc releases. It has NOT been in linux-next, but has passed 0-day testing and looks 'obviously correct' when reviewing it locally :)" * tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: lkdtm: Use init_uts_ns.name instead of macros
-
git://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull IPMI updates from Corey Minyard: "A couple of very minor fixes for style and rate limiting. Nothing big, but probably needs to go in" * tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi: char: ipmi: use DEVICE_ATTR helper macro ipmi: rate limit ipmi smi_event failure message
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Borislav Petkov: - Make sure the idle timer expires in hardirq context, on PREEMPT_RT - Make sure the run-queue balance callback is invoked only on the outgoing CPU * tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Prevent balance_push() on remote runqueues sched/idle: Make the idle timer expire in hard interrupt context
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Borislav Petkov: - Fix the futex PI requeue machinery to not return to userspace in inconsistent state - Avoid a potential null pointer dereference in the ww_mutex deadlock check - Other smaller cleanups and optimizations * tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Fix ww_mutex deadlock check futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic() futex: Avoid redundant task lookup futex: Clarify comment for requeue_pi_wake_futex() futex: Prevent inconsistent state and exit race futex: Return error code instead of assigning it without effect locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Borislav Petkov: - Handle negative second values properly when converting a timespec64 to nanoseconds. * tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Handle negative seconds correctly in timespec64_to_ns()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull namei updates from Al Viro: "Clearing fallout from mkdirat in io_uring series. The fix in the kern_path_locked() patch plus associated cleanups" * 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: putname(): IS_ERR_OR_NULL() is wrong here namei: Standardize callers of filename_create() namei: Standardize callers of filename_lookup() rename __filename_parentat() to filename_parentat() namei: Fix use after free in kern_path_locked
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smbfs updates from Steve French: "cifs/smb3 updates: - DFS reconnect fix - begin creating common headers for server and client - rename the cifs_common directory to smbfs_common to be more consistent ie change use of the name cifs to smb (smb3 or smbfs is more accurate, as the very old cifs dialect has long been superseded by smb3 dialects). In the future we can rename the fs/cifs directory to fs/smbfs. This does not include the set of multichannel fixes nor the two deferred close fixes (they are still being reviewed and tested)" * tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: properly invalidate cached root handle when closing it cifs: move SMB FSCTL definitions to common code cifs: rename cifs_common to smbfs_common cifs: update FSCTL definitions
-
- 11 Sep, 2021 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio updates from Michael Tsirkin: - vduse driver ("vDPA Device in Userspace") supporting emulated virtio block devices - virtio-vsock support for end of record with SEQPACKET - vdpa: mac and mq support for ifcvf and mlx5 - vdpa: management netlink for ifcvf - virtio-i2c, gpio dt bindings - misc fixes and cleanups * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits) Documentation: Add documentation for VDUSE vduse: Introduce VDUSE - vDPA Device in Userspace vduse: Implement an MMU-based software IOTLB vdpa: Support transferring virtual addressing during DMA mapping vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap() vdpa: Add an opaque pointer for vdpa_config_ops.dma_map() vhost-iotlb: Add an opaque pointer for vhost IOTLB vhost-vdpa: Handle the failure of vdpa_reset() vdpa: Add reset callback in vdpa_config_ops vdpa: Fix some coding style issues file: Export receive_fd() to modules eventfd: Export eventfd_wake_count to modules iova: Export alloc_iova_fast() and free_iova_fast() virtio-blk: remove unneeded "likely" statements virtio-balloon: Use virtio_find_vqs() helper vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro vsock_test: update message bounds test for MSG_EOR af_vsock: rename variables in receive loop virtio/vsock: support MSG_EOR bit processing vhost/vsock: support MSG_EOR bit processing ... -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull more RISC-V updates from Palmer Dabbelt: - A pair of defconfig additions, for NVMe and the EFI filesystem localization options. - A larger address space for stack randomization. - A cleanup to our install rules. - A DTS update for the Microchip Icicle board, to fix the serial console. - Support for build-time table sorting, which allows us to have __ex_table read-only. * tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Move EXCEPTION_TABLE to RO_DATA segment riscv: Enable BUILDTIME_TABLE_SORT riscv: dts: microchip: mpfs-icicle: Fix serial console riscv: move the (z)install rules to arch/riscv/Makefile riscv: Improve stack randomisation on RV64 riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1 riscv: defconfig: enable BLK_DEV_NVME
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linuxLinus Torvalds authored
Pull coccinelle updates from Julia Lawall: "These changes update some existing semantic patches with respect to some recent changes in the kernel. Specifically, the change to kvmalloc.cocci searches for kfree_sensitive rather than kzfree, and the change to use_after_iter.cocci adds list_entry_is_head as a valid use of a list iterator index variable after the end of the loop" * 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: scripts: coccinelle: allow list_entry_is_head() to use pos coccinelle: api: rename kzfree to kfree_sensitive
-
Arnaldo Carvalho de Melo authored
Picking the changes from: 17ce9c61 ("drm: document DRM_IOCTL_MODE_RMFB") Doesn't result in any tooling changes: $ tools/perf/trace/beauty/drm_ioctl.sh > before $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h $ tools/perf/trace/beauty/drm_ioctl.sh > after $ diff -u before after Silencing these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h Cc: Simon Ser <contact@emersion.fr> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
To pick the changes in: b65a9489 ("drm/i915/userptr: Probe existence of backing struct pages upon creation") ee242ca7 ("drm/i915/guc: Implement GuC priority management") 81340cf3 ("drm/i915/uapi: reject set_domain for discrete") 7961c5b6 ("drm/i915: Add TTM offset argument to mmap.") aef7b67a ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc") e7737b67 ("drm/i915/uapi: reject caching ioctls for discrete") 3aa8c57f ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc") 289f5a72 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc") 4a766ae4 ("drm/i915: Drop the CONTEXT_CLONE API (v2)") 6ff6d61d ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP") fe4751c3 ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE") 57772953 ("drm/i915: Document the Virtual Engine uAPI") c649432e ("drm/i915: Fix busy ioctl commentary") That doesn't result in any changes to tooling as no new ioctl were added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh). Addressing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
