- 17 Nov, 2014 1 commit
-
-
Paolo Bonzini authored
The two kmemdup invocations can be unified. I find that the new placement of the comment makes it easier to see what happens. Reviewed-by:
Igor Mammedov <imammedo@redhat.com> Reviewed-by:
Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 14 Nov, 2014 3 commits
-
-
Paolo Bonzini authored
This completes the optimization from the previous patch, by removing the KVM_MEM_SLOTS_NUM-iteration loop from insert_memslot. Reviewed-by:
-
Igor Mammedov authored
memslots is a sorted array. When a slot is changed, heapsort (lib/sort.c) would take O(n log n) time to update it; an optimized insertion sort will only cost O(n) on an array with just one item out of order. Replace sort() with a custom sort that takes advantage of memslots usage pattern and the known position of the changed slot. performance change of 128 memslots insertions with gradually increasing size (the worst case): heap sort custom sort max: 249747 2500 cycles with custom sort alg taking ~98% less then original update time. Signed-off-by: -
Igor Mammedov authored
With the 3 private slots, this gives us 512 slots total. Motivation for this is in addition to assigned devices support more memory hotplug slots, where 1 slot is used by a hotplugged memory stick. It will allow to support upto 256 hotplug memory slots and leave 253 slots for assigned devices and other devices that use them. Signed-off-by:
-
- 13 Nov, 2014 1 commit
-
-
Chris J Arges authored
When running the tsc_adjust kvm-unit-test on an AMD processor with the IA32_TSC_ADJUST feature enabled, the WARN_ON in svm_adjust_tsc_offset can be triggered. This WARN_ON checks for a negative adjustment in case __scale_tsc is called; however it may trigger unnecessary warnings. This patch moves the WARN_ON to trigger only if __scale_tsc will actually be called from svm_adjust_tsc_offset. In addition make adj in kvm_set_msr_common s64 since this can have signed values. Signed-off-by:
Chris J Arges <chris.j.arges@canonical.com> Signed-off-by:
-
- 12 Nov, 2014 2 commits
-
-
Andy Lutomirski authored
There's nothing to switch if the host and guest values are the same. I am unable to find evidence that this makes any difference whatsoever. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> [I could see a difference on Nehalem. From 5 runs: userspace exit, guest!=host 12200 11772 12130 12164 12327 userspace exit, guest=host 11983 11780 11920 11919 12040 lightweight exit, guest!=host 3214 3220 3238 3218 3337 lightweight exit, guest=host 3178 3193 3193 3187 3220 This passes the t-test with 99% confidence for userspace exit, 98.5% confidence for lightweight exit. - Paolo] Signed-off-by:
-
Andy Lutomirski authored
At least on Sandy Bridge, letting the CPU switch IA32_EFER is much faster than switching it manually. I benchmarked this using the vmexit kvm-unit-test (single run, but GOAL multiplied by 5 to do more iterations): Test Before After Change cpuid 2000 1932 -3.40% vmcall 1914 1817 -5.07% mov_from_cr8 13 13 0.00% mov_to_cr8 19 19 0.00% inl_from_pmtimer 19164 10619 -44.59% inl_from_qemu 15662 10302 -34.22% inl_from_kernel 3916 3802 -2.91% outl_to_kernel 2230 2194 -1.61% mov_dr 172 176 2.33% ipi (skipped) (skipped) ipi+halt (skipped) (skipped) ple-round-robin 13 13 0.00% wr_tsc_adjust_msr 1920 1845 -3.91% rd_tsc_adjust_msr 1892 1814 -4.12% mmio-no-eventfd:pci-mem 16394 11165 -31.90% mmio-wildcard-eventfd:pci-mem 4607 4645 0.82% mmio-datamatch-eventfd:pci-mem 4601 4610 0.20% portio-no-eventfd:pci-io 11507 7942 -30.98% portio-wildcard-eventfd:pci-io 2239 2225 -0.63% portio-datamatch-eventfd:pci-io 2250 2234 -0.71% I haven't explicitly computed the significance of these numbers, but this isn't subtle. Signed-off-by:
-
- 10 Nov, 2014 1 commit
-
-
Paolo Bonzini authored
PCIDs are only supported in 64-bit mode. No need to clear bit 63 of CR3 unless the host is 64-bit. Reported by Fengguang Wu's autobuilder. Signed-off-by:
-
- 08 Nov, 2014 7 commits
-
-
David Matlack authored
The new trace event records: * the id of vcpu being updated * the pvclock_vcpu_time_info struct being written to guest memory This is useful for debugging pvclock bugs, such as the bug fixed by "[PATCH] kvm: x86: Fix kvm clock versioning.". Signed-off-by:
David Matlack <dmatlack@google.com> Signed-off-by:
-
Owen Hofmann authored
kvm updates the version number for the guest paravirt clock structure by incrementing the version of its private copy. It does not read the guest version, so will write version = 2 in the first update for every new VM, including after restoring a saved state. If guest state is saved during reading the clock, it could read and accept struct fields and guest TSC from two different updates. This changes the code to increment the guest version and write it back. Signed-off-by:
Owen Hofmann <osh@google.com> Reviewed-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Nadav Amit authored
Commit 3b32004a ("KVM: x86: movnti minimum op size of 32-bit is not kept") did not fully fix the minimum operand size of MONTI emulation. Still, MOVNTI may be mistakenly performed using 16-bit opsize. This patch add No16 flag to mark an instruction does not support 16-bits operand size. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
-
Marcelo Tosatti authored
When the guest writes to the TSC, the masterclock TSC copy must be updated as well along with the TSC_OFFSET update, otherwise a negative tsc_timestamp is calculated at kvm_guest_time_update. Once "if (!vcpus_matched && ka->use_master_clock)" is simplified to "if (ka->use_master_clock)", the corresponding "if (!ka->use_master_clock)" becomes redundant, so remove the do_request boolean and collapse everything into a single condition. Signed-off-by:
-
Nadav Amit authored
Now that KVM injects #UD on "unhandlable" error, it makes better sense to return such error on sysenter instead of directly injecting #UD to the guest. This allows to track more easily the unhandlable cases the emulator does not support. Signed-off-by:
-
Nadav Amit authored
APIC base relocation is unsupported by KVM. If anyone uses it, the least should be to report a warning in the hypervisor. Note that KVM-unit-tests uses this feature for some reason, so running the tests triggers the warning. Signed-off-by:
-
Nadav Amit authored
Commit 7fe864dc (KVM: x86: Mark VEX-prefix instructions emulation as unimplemented, 2014-06-02) marked VEX instructions as such in protected mode. VEX-prefix instructions are not supported relevant on real-mode and VM86, but should cause #UD instead of being decoded as LES/LDS. Fix this behaviour to be consistent with real hardware. Signed-off-by:
-
- 07 Nov, 2014 23 commits
-
-
Nadav Amit authored
Task-switch emulation checks the privilege level prior to performing the task-switch. This check is incorrect in the case of task-gates, in which the tss.dpl is ignored, and can cause superfluous exceptions. Moreover this check is unnecassary, since the CPU checks the privilege levels prior to exiting. Intel SDM 25.4.2 says "If CALL or JMP accesses a TSS descriptor directly outside IA-32e mode, privilege levels are checked on the TSS descriptor" prior to exiting. AMD 15.14.1 says "The intercept is checked before the task switch takes place but after the incoming TSS and task gate (if one was involved) have been checked for correctness." This patch removes the CPL checks for CALL and JMP. Signed-off-by:
-
Nadav Amit authored
When emulating LTR/LDTR/LGDT/LIDT, #GP should be injected if the base is non-canonical. Otherwise, VM-entry will fail. Signed-off-by:
-
Nadav Amit authored
LGDT and LIDT emulation logic is almost identical. Merge the logic into a single point to avoid redundancy. This will be used by the next patch that will ensure the bases of the loaded GDTR and IDTR are canonical. Signed-off-by:
-
Nadav Amit authored
If the emulation ends in fault, eflags should not be updated. However, several instruction emulations (actually all the fastops) currently update eflags, if the fault was detected afterwards (e.g., #PF during writeback). Signed-off-by:
-
Nadav Amit authored
Although Intel SDM mentions bit 63 is reserved, MOV to CR3 can have bit 63 set. As Intel SDM states in section 4.10.4 "Invalidation of TLBs and Paging-Structure Caches": " MOV to CR3. ... If CR4.PCIDE = 1 and bit 63 of the instructionâ€
™ s source operand is 0 ..." In other words, bit 63 is not reserved. KVM emulator currently consider bit 63 as reserved. Fix it. Signed-off-by: -
Nadav Amit authored
According to Intel SDM push of segment selectors is done in the following manner: "if the operand size is 32-bits, either a zero-extended value is pushed on the stack or the segment selector is written on the stack using a 16-bit move. For the last case, all recent Core and Atom processors perform a 16-bit move, leaving the upper portion of the stack location unmodified." This patch modifies the behavior to match the core behavior. Signed-off-by:
-
Nadav Amit authored
CMPS and SCAS instructions are evaluated in the wrong order. For reference (of CMPS), see http://www.fermimn.gov.it/linux/quarta/x86/cmps.htm : "Note that the direction of subtraction for CMPS is [SI] - [DI] or [ESI] - [EDI]. The left operand (SI or ESI) is the source and the right operand (DI or EDI) is the destination. This is the reverse of the usual Intel convention in which the left operand is the destination and the right operand is the source." Introducing em_cmp_r for this matter that performs comparison in reverse order using fastop infrastructure to avoid a wrapper function. Signed-off-by:
-
Nadav Amit authored
SYSCALL emulation currently clears in 64-bit mode eflags according to MSR_SYSCALL_MASK. However, on bare-metal eflags[1] which is fixed to one cannot be cleared, even if MSR_SYSCALL_MASK masks the bit. This wrong behavior may result in failed VM-entry, as VT disallows entry with eflags[1] cleared. This patch sets the bit after masking eflags on syscall. Signed-off-by:
-
Nadav Amit authored
In x86, you can only MOV-sreg to memory with either 16-bits or 64-bits size. In contrast, KVM may write to 32-bits memory on MOV-sreg. This patch fixes KVM behavior, and sets the destination operand size to two, if the destination is memory. When destination is registers, and the operand size is 32-bits, the high 16-bits in modern CPUs is filled with zero. This is handled correctly. Signed-off-by:
-
Nadav Amit authored
x86 debug registers hold a linear address. Therefore, breakpoints detection should consider CS.base, and check whether instruction linear address equals (CS.base + RIP). This patch introduces a function to evaluate RIP linear address and uses it for breakpoints detection. Signed-off-by:
-
Nadav Amit authored
DR6[0:3] (previous breakpoint indications) are cleared when #DB is injected during handle_exception, just as real hardware does. Similarily, handle_dr should clear DR6[0:3]. Signed-off-by:
-
Nadav Amit authored
It should clear B0-B3 and set BD. Signed-off-by:
-
Nadav Amit authored
Real-mode exceptions do not deliver error code. As can be seen in Intel SDM volume 2, real-mode exceptions do not have parentheses, which indicate error-code. To avoid significant changes of the code, the error code is "removed" during exception queueing. Signed-off-by:
-
Nadav Amit authored
In one occassion, decode_modrm uses the rm field after it is extended with REX.B to determine the addressing mode. Doing so causes it not to read the offset for rip-relative addressing with REX.B=1. This patch moves the fetch where we already mask REX.B away instead. Signed-off-by:
-
Wei Wang authored
A bug was reported as follows: when running Windows 7 32-bit guests on qemu-kvm, sometimes the guests run into blue screen during reboot. The problem was that a guest's RVI was not cleared when it rebooted. This patch has fixed the problem. Signed-off-by:
Wei Wang <wei.w.wang@intel.com> Signed-off-by:
Yang Zhang <yang.z.zhang@intel.com> Tested-by:
Rongrong Liu <rongrongx.liu@intel.com>, Da Chun <ngugc@qq.com> Signed-off-by:
-
Paolo Bonzini authored
Return a negative error code instead, and WARN() when we should be covering the entire 2-bit space of vmcs_field_type's return value. For increased robustness, add a BUILD_BUG_ON checking the range of vmcs_field_to_offset. Suggested-by:
Tiejun Chen <tiejun.chen@intel.com> Signed-off-by:
-
Tiejun Chen authored
Instead of vmx_init(), actually it would make reasonable sense to do anything specific to vmx hardware setting in vmx_x86_ops->hardware_setup(). Signed-off-by:
-
Tiejun Chen authored
Just move this pair of functions down to make sure later we can add something dependent on others. Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-20141107' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes for kvm/next (3.19) and stable 1. We should flush TLBs for load control instruction emulation (stable) 2. A workaround for a compiler bug that renders ACCESS_ONCE broken (stable) 3. Fix program check handling for load control 4. Documentation Fix
-
Dominik Dingel authored
Documentation uses incorrect attribute names for some vm device attributes: fix this. Signed-off-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Heiko Carstens authored
According to the architecture all instructions are suppressing if memory access is prohibited due to DAT protection, unless stated otherwise for an instruction. The lctl[g]/stctl[g] implementations handled this incorrectly since control register handling was done piecemeal, which means they had terminating instead of suppressing semantics. This patch fixes this. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by:
Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
some control register changes will flush some aspects of the CPU, e.g. POP explicitely mentions that for CR9-CR11 "TLBs may be cleared". Instead of trying to be clever and only flush on specific CRs, let play safe and flush on all lctl(g) as future machines might define new bits in CRs. Load control intercept should not happen that often. Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by:
-
Christian Borntraeger authored
ipte_unlock_siif uses cmpxchg to replace the in-memory data of the ipte lock together with ACCESS_ONCE for the intial read. union ipte_control { unsigned long val; struct { unsigned long k : 1; unsigned long kh : 31; unsigned long kg : 32; }; }; [...] static void ipte_unlock_siif(struct kvm_vcpu *vcpu) { union ipte_control old, new, *ic; ic = &vcpu->kvm->arch.sca->ipte_control; do { new = old = ACCESS_ONCE(*ic); new.kh--; if (!new.kh) new.k = 0; } while (cmpxchg(&ic->val, old.val, new.val) != old.val); if (!new.kh) wake_up(&vcpu->kvm->arch.ipte_wq); } The new value, is loaded twice from memory with gcc 4.7.2 of fedora 18, despite the ACCESS_ONCE: ---> l %r4,0(%r3) <--- load first 32 bit of lock (k and kh) in r4 alfi %r4,2147483647 <--- add -1 to r4 llgtr %r4,%r4 <--- zero out the sign bit of r4 lg %r1,0(%r3) <--- load all 64 bit of lock into new lgr %r2,%r1 <--- load the same into old risbg %r1,%r4,1,31,32 <--- shift and insert r4 into the bits 1-31 of new llihf %r4,2147483647 ngrk %r4,%r1,%r4 jne aa0 <ipte_unlock+0xf8> nihh %r1,32767 lgr %r4,%r2 csg %r4,%r1,0(%r3) cgr %r2,%r4 jne a70 <ipte_unlock+0xc8> If the memory value changes between the first load (l) and the second load (lg) we are broken. If that happens VCPU threads will hang (unkillable) in handle_ipte_interlock. Andreas Krebbel analyzed this and tracked it down to a compiler bug in that version: "while it is not that obvious the C99 standard basically forbids duplicating the memory access also in that case. For an argumentation of a similiar case please see: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=22278#c43 For the implementation-defined cases regarding volatile there are some GCC-specific clarifications which can be found here: https://gcc.gnu.org/onlinedocs/gcc/Volatiles.html#Volatiles I've tracked down the problem with a reduced testcase. The problem was that during a tree level optimization (SRA - scalar replacement of aggregates) the volatile marker is lost. And an RTL level optimizer (CSE - common subexpression elimination) then propagated the memory read into its second use introducing another access to the memory location. So indeed Christian's suspicion that the union access has something to do with it is correct (since it triggered the SRA optimization). This issue has been reported and fixed in the GCC 4.8 development cycle: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145" This patch replaces the ACCESS_ONCE scheme with a barrier() based scheme that should work for all supported compilers. Signed-off-by:
-
- 03 Nov, 2014 2 commits
-
-
Tiejun Chen authored
We can use get_cpu() and put_cpu() to replace preempt_disable()/cpu = smp_processor_id() and preempt_enable() for slightly better code. Signed-off-by:
-
Radim Krčmář authored
We mirror a subset of these registers in separate variables. Using them directly should be faster. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
