This header defines the BPF functions enumerated in uapi/linux.bpf.h
in a callable format. Expand to include all registered functions.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

wrap bpf_stats_enabled sysctl with #ifdef
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 492ecee8 ("bpf: enable program stats")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Yonghong Song says:

====================
The inner_map_meta->spin_lock_off is not set correctly during
map creation for BPF_MAP_TYPE_ARRAY_OF_MAPS and BPF_MAP_TYPE_HASH_OF_MAPS.
This may lead verifier error due to misinformation.
This patch set fixed the issue with Patch #1 for the kernel change
and Patch #2 for enhanced selftest test_maps.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The bpf_map_lookup_elem is added in the bpf program.
Without previous patch, the test change will trigger the
following error:
  $ ./test_maps
  ...
  ; value_p = bpf_map_lookup_elem(map, &key);
  20: (bf) r1 = r7
  21: (bf) r2 = r8
  22: (85) call bpf_map_lookup_elem#1
  ; if (!value_p || *value_p != 123)
  23: (15) if r0 == 0x0 goto pc+16
   R0=map_value(id=2,off=0,ks=4,vs=4,imm=0) R6=inv1 R7=map_ptr(id=0,off=0,ks=4,vs=4,imm=0)
   R8=fp-8,call_-1 R10=fp0,call_-1 fp-8=mmmmmmmm
  ; if (!value_p || *value_p != 123)
  24: (61) r1 = *(u32 *)(r0 +0)
   R0=map_value(id=2,off=0,ks=4,vs=4,imm=0) R6=inv1 R7=map_ptr(id=0,off=0,ks=4,vs=4,imm=0)
   R8=fp-8,call_-1 R10=fp0,call_-1 fp-8=mmmmmmmm
  bpf_spin_lock cannot be accessed directly by load/store

With the kernel fix in the previous commit, the error goes away.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Commit d83525ca ("bpf: introduce bpf_spin_lock")
introduced bpf_spin_lock and the field spin_lock_off
in kernel internal structure bpf_map has the following
meaning:
  >=0 valid offset, <0 error

For every map created, the kernel will ensure
spin_lock_off has correct value.

Currently, bpf_map->spin_lock_off is not copied
from the inner map to the map_in_map inner_map_meta
during a map_in_map type map creation, so
inner_map_meta->spin_lock_off = 0.
This will give verifier wrong information that
inner_map has bpf_spin_lock and the bpf_spin_lock
is defined at offset 0. An access to offset 0
of a value pointer will trigger the following error:
   bpf_spin_lock cannot be accessed directly by load/store

This patch fixed the issue by copy inner map's spin_lock_off
value to inner_map_meta->spin_lock_off.

Fixes: d83525ca ("bpf: introduce bpf_spin_lock")
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently, running sample "task_fd_query" and "tracex3" occurs the
following error. On kernel v5.0-rc* this sample will be unavailable
due to the removal of function 'blk_start_request' at commit "a1ce35fa".
(function removed, as "Single Queue IO scheduler" no longer exists)

$ sudo ./task_fd_query
failed to create kprobe 'blk_start_request' error 'No such file or
directory'

This commit will change the function 'blk_start_request' to
'blk_mq_start_request' to fix the broken sample.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Alexei Starovoitov says:

====================
Introduce per program stats to monitor the usage BPF.

v2->v3:
- rename to run_time_ns/run_cnt everywhere

v1->v2:
- fixed u64 stats on 32-bit archs. Thanks Eric
- use more verbose run_time_ns in json output as suggested by Andrii
- refactored prog_alloc and clarified behavior of stats in subprogs
====================
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

$ bpftool p s
1: kprobe  tag a56587d488d216c9  gpl run_time_ns 79786 run_cnt 8
	loaded_at 2019-02-22T12:22:51-0800  uid 0
	xlated 352B  not jited  memlock 4096B

$ bpftool --json --pretty p s
[{
        "id": 1,
        "type": "kprobe",
        "tag": "a56587d488d216c9",
        "gpl_compatible": true,
        "run_time_ns": 79786,
        "run_cnt": 8,
        "loaded_at": 1550866971,
        "uid": 0,
        "bytes_xlated": 352,
        "jited": false,
        "bytes_memlock": 4096
    }
]
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

sync bpf.h into tools directory
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Return bpf program run_time_ns and run_cnt via bpf_prog_info
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

JITed BPF programs are indistinguishable from kernel functions, but unlike
kernel code BPF code can be changed often.
Typical approach of "perf record" + "perf report" profiling and tuning of
kernel code works just as well for BPF programs, but kernel code doesn't
need to be monitored whereas BPF programs do.
Users load and run large amount of BPF programs.
These BPF stats allow tools monitor the usage of BPF on the server.
The monitoring tools will turn sysctl kernel.bpf_stats_enabled
on and off for few seconds to sample average cost of the programs.
Aggregated data over hours and days will provide an insight into cost of BPF
and alarms can trigger in case given program suddenly gets more expensive.

The cost of two sched_clock() per program invocation adds ~20 nsec.
Fast BPF progs (like selftests/bpf/progs/test_pkt_access.c) will slow down
from ~10 nsec to ~30 nsec.
static_key minimizes the cost of the stats collection.
There is no measurable difference before/after this patch
with kernel.bpf_stats_enabled=0
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Magnus Karlsson says:

====================
This patch proposes to add AF_XDP support to libbpf. The main reason
for this is to facilitate writing applications that use AF_XDP by
offering higher-level APIs that hide many of the details of the AF_XDP
uapi. This is in the same vein as libbpf facilitates XDP adoption by
offering easy-to-use higher level interfaces of XDP
functionality. Hopefully this will facilitate adoption of AF_XDP, make
applications using it simpler and smaller, and finally also make it
possible for applications to benefit from optimizations in the AF_XDP
user space access code. Previously, people just copied and pasted the
code from the sample application into their application, which is not
desirable.

The proposed interface is composed of two parts:

* Low-level access interface to the four rings and the packet
* High-level control plane interface for creating and setting up umems
  and AF_XDP sockets. This interface also loads a simple XDP program
  that routes all traffic on a queue up to the AF_XDP socket.

The sample program has been updated to use this new interface and in
that process it lost roughly 300 lines of code. I cannot detect any
performance degradations due to the use of this library instead of the
previous functions that were inlined in the sample application. But I
did measure this on a slower machine and not the Broadwell that we
normally use.

The rings are now called xsk_ring and when a producer operates on
it. It is xsk_ring_prod and for a consumer it is xsk_ring_cons. This
way we can get some compile time error checking that the rings are
used correctly.

Comments and contenplations:

* The current behaviour is that the library loads an XDP program (if
  requested to do so) but the clean up of this program is left to the
  application. It would be possible to implement this cleanup in the
  library, but it would require state to be kept on netdev level,
  which there is none at the moment, and the synchronization of this
  between processes. All this adding complexity. But when we get an
  XDP program per queue id, then it becomes trivial to also remove the
  XDP program when the application exits. This proposal from Jesper,
  Björn and others will also improve the performance of libbpf, since
  most of the XDP program code can be removed when that feature is
  supported.

* In a future release, I am planning on adding a higher level data
  plane interface too. This will be based around recvmsg and sendmsg
  with the use of struct iovec for batching, without the user having
  to know anything about the underlying four rings of an AF_XDP
  socket. There will be one semantic difference though from the
  standard recvmsg and that is that the kernel will fill in the iovecs
  instead of the application. But the rest should be the same as the
  libc versions so that application writers feel at home.

Patch 1: adds AF_XDP support in libbpf
Patch 2: updates the xdpsock sample application to use the libbpf functions
Patch 3: Documentation update to help first time users

Changes v5 to v6:
  * Fixed prog_fd bug found by Xiaolong Ye. Thanks!
Changes v4 to v5:
  * Added a FAQ to the documentation
  * Removed xsk_umem__get_data and renamed xsk_umem__get_dat_raw to
    xsk_umem__get_data
  * Replaced the netlink code with bpf_get_link_xdp_id()
  * Dynamic allocation of the map sizes. They are now sized after
    the max number of queueus on the netdev in question.
Changes v3 to v4:
  * Dropped the pr_*() patch in favor of Yonghong Song's patch set
  * Addressed the review comments of Daniel Borkmann, mainly leaking
    of file descriptors at clean up and making the data plane APIs
    all static inline (with the exception of xsk_umem__get_data that
    uses an internal structure I do not want to expose).
  * Fixed the netlink callback as suggested by Maciej Fijalkowski.
  * Removed an unecessary include in the sample program as spotted by
    Ilia Fillipov.
Changes v2 to v3:
  * Added automatic loading of a simple XDP program that routes all
    traffic on a queue up to the AF_XDP socket. This program loading
    can be disabled.
  * Updated function names to be consistent with the libbpf naming
    convention
  * Moved all code to xsk.[ch]
  * Removed all the XDP program loading code from the sample since
    this is now done by libbpf
  * The initialization functions now return a handle as suggested by
    Alexei
  * const statements added in the API where applicable.
Changes v1 to v2:
  * Fixed cleanup of library state on error.
  * Moved API to initial version
  * Prefixed all public functions by xsk__ instead of xsk_
  * Added comment about changed default ring sizes, batch size and umem
    size in the sample application commit message
  * The library now only creates an Rx or Tx ring if the respective
    parameter is != NULL
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Added an FAQ section in Documentation/networking/af_xdp.rst to help
first time users with common problems. As problems are getting
identified, entries will be added to the FAQ.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This commit converts the xdpsock sample application to use the AF_XDP
functions present in libbpf. This cuts down the size of it by nearly
300 lines of code.

The default ring sizes plus the batch size has been increased and the
size of the umem area has decreased. This so that the sample application
will provide higher throughput. Note also that the shared umem code
has been removed from the sample as this is not supported by libbpf
at this point in time.
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This commit adds AF_XDP support to libbpf. The main reason for this is
to facilitate writing applications that use AF_XDP by offering
higher-level APIs that hide many of the details of the AF_XDP
uapi. This is in the same vein as libbpf facilitates XDP adoption by
offering easy-to-use higher level interfaces of XDP
functionality. Hopefully this will facilitate adoption of AF_XDP, make
applications using it simpler and smaller, and finally also make it
possible for applications to benefit from optimizations in the AF_XDP
user space access code. Previously, people just copied and pasted the
code from the sample application into their application, which is not
desirable.

The interface is composed of two parts:

* Low-level access interface to the four rings and the packet
* High-level control plane interface for creating and setting
  up umems and af_xdp sockets as well as a simple XDP program.
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Simple test that I used to reproduce the issue in the previous commit:
Do BPF_PROG_TEST_RUN with max iterations, each program is 4096 simple
move instructions. File alarm in 0.1 second and check that
bpf_prog_test_run is interrupted (i.e. test doesn't hang).

Note: reposting this for bpf-next to avoid linux-next conflict. In this
version I test both BPF_PROG_TYPE_SOCKET_FILTER (which uses generic
bpf_test_run implementation) and BPF_PROG_TYPE_FLOW_DISSECTOR (which has
it own loop with preempt handling in bpf_prog_test_run_flow_dissector).
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Syzbot found out that running BPF_PROG_TEST_RUN with repeat=0xffffffff
makes process unkillable. The problem is that when CONFIG_PREEMPT is
enabled, we never see need_resched() return true. This is due to the
fact that preempt_enable() (which we do in bpf_test_run_one on each
iteration) now handles resched if it's needed.

Let's disable preemption for the whole run, not per test. In this case
we can properly see whether resched is needed.
Let's also properly return -EINTR to the userspace in case of a signal
interrupt.

This is a follow up for a recently fixed issue in bpf_test_run, see
commit df1a2cb7 ("bpf/test_run: fix unkillable
BPF_PROG_TEST_RUN").
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When running BPF test suite the following splat occurs:

[  415.930950] test_bpf: #0 TAX jited:0
[  415.931067] BUG: assuming atomic context at lib/test_bpf.c:6674
[  415.946169] in_atomic(): 0, irqs_disabled(): 0, pid: 11556, name: modprobe
[  415.953176] INFO: lockdep is turned off.
[  415.957207] CPU: 1 PID: 11556 Comm: modprobe Tainted: G        W         5.0.0-rc7-next-20190220 #1
[  415.966328] Hardware name: HiKey Development Board (DT)
[  415.971592] Call trace:
[  415.974069]  dump_backtrace+0x0/0x160
[  415.977761]  show_stack+0x24/0x30
[  415.981104]  dump_stack+0xc8/0x114
[  415.984534]  __cant_sleep+0xf0/0x108
[  415.988145]  test_bpf_init+0x5e0/0x1000 [test_bpf]
[  415.992971]  do_one_initcall+0x90/0x428
[  415.996837]  do_init_module+0x60/0x1e4
[  416.000614]  load_module+0x1de0/0x1f50
[  416.004391]  __se_sys_finit_module+0xc8/0xe0
[  416.008691]  __arm64_sys_finit_module+0x24/0x30
[  416.013255]  el0_svc_common+0x78/0x130
[  416.017031]  el0_svc_handler+0x38/0x78
[  416.020806]  el0_svc+0x8/0xc

Rework so that preemption is disabled when we loop over function
'BPF_PROG_RUN(...)'.

Fixes: 568f1967 ("bpf: check that BPF programs run with preemption disabled")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The xdp_redirect and xdp_redirect_map sample programs both load a dummy
program onto the egress interfaces. However, the unload code checks these
programs against the wrong id number, and thus refuses to unload them. Fix
the comparison to avoid this.

Fixes: 3b7a8ec2 ("samples/bpf: Check the prog id before exiting")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

All BPF programs must be called with preemption disabled.

Fixes: 568f1967 ("bpf: check that BPF programs run with preemption disabled")
Reported-by: syzbot+8bf19ee2aa580de7a2a7@syzkaller.appspotmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The skb->queue_mapping already have read access, via __sk_buff->queue_mapping.

This patch allow BPF tc qdisc clsact write access to the queue_mapping via
tc_cls_act_is_valid_access.  Also handle that the value NO_QUEUE_MAPPING
is not allowed.

It is already possible to change this via TC filter action skbedit
tc-skbedit(8).  Due to the lack of TC examples, lets show one:

  # tc qdisc  add  dev ixgbe1 clsact
  # tc filter add  dev ixgbe1 ingress matchall action skbedit queue_mapping 5
  # tc filter list dev ixgbe1 ingress

The most common mistake is that XPS (Transmit Packet Steering) takes
precedence over setting skb->queue_mapping. XPS is configured per DEVICE
via /sys/class/net/DEVICE/queues/tx-*/xps_cpus via a CPU hex mask. To
disable set mask=00.

The purpose of changing skb->queue_mapping is to influence the selection of
the net_device "txq" (struct netdev_queue), which influence selection of
the qdisc "root_lock" (via txq->qdisc->q.lock) and txq->_xmit_lock. When
using the MQ qdisc the txq->qdisc points to different qdiscs and associated
locks, and HARD_TX_LOCK (txq->_xmit_lock), allowing for CPU scalability.

Due to lack of TC examples, lets show howto attach clsact BPF programs:

 # tc qdisc  add  dev ixgbe2 clsact
 # tc filter add  dev ixgbe2 egress bpf da obj XXX_kern.o sec tc_qmap2cpu
 # tc filter list dev ixgbe2 egress
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Introduce cant_sleep() macro for annotation of functions that
cannot sleep.

Use it in BPF_PROG_RUN to catch execution of BPF programs in
preemptable context.
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpftool has support for attach types "stream_verdict" and
"stream_parser" but the documentation was referring to them as
"skb_verdict" and "skb_parse". The inconsistency comes from commit
b7d3826c ("bpf: bpftool, add support for attaching programs to
maps").

This patch changes the documentation to match the implementation:
- "bpftool prog help"
- man pages
- bash completion
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c: In function 'bnx2x_get_hwinfo':
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:11940:10: warning:
 variable 'mfw_vn' set but not used [-Wunused-but-set-variable]

It's never used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
net: phy: add helpers for handling C45 10GBT AN register values

Similar to the existing helpers for the Clause 22 registers add helpers
to deal with converting Clause 45 advertisement registers to / from
link mode bitmaps.

Note that these helpers are defined in linux/mdio.h, not like the
Clause 22 helpers in linux/mii.h. Reason is that the Clause 45 register
constants are defined in uapi/linux/mdio.h. And uapi/linux/mdio.h
includes linux/mii.h before defining the C45 register constants.

v2:
- Remove few helpers which aren't used by this series. They will
  follow together with the users.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use mii_10gbt_stat_mod_linkmode_lpa_t() in genphy_c45_read_lpa() to
simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to the existing helpers for the Clause 22 registers add helper
mii_10gbt_stat_mod_linkmode_lpa_t.

Note that this helper is defined in linux/mdio.h, not like the
Clause 22 helpers in linux/mii.h. Reason is that the Clause 45 register
constants are defined in uapi/linux/mdio.h. And uapi/linux/mdio.h
includes linux/mii.h before defining the C45 register constants.

v2:
- remove helpers that don't have users in this series
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix following warning:

drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:1453:35: warning: Using plain integer as NULL pointer
drivers/net/ethernet/cavium/liquidio/lio_main.c:2910:23: warning: Using plain integer as NULL pointer
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

writex() has implicit barriers, that's what makes it different from
writex_relaxed(). Therefore these calls to mmiowb() can be removed.

This patch was recently reverted due to a dependency with another
problematic patch. But because it didn't contribute to the problem
it was rebased and can be resubmitted.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RPS not work for DSA devices since the 'skb_get_hash'
will always get the invalid hash for dsa tagged packets.

"[PATCH] tag_mtk: add flow_dissect callback to the ops struct"
introduced the flow_dissect callback to get the right hash for
MTK tagged packet. Tag_dsa and tag_edsa  also need to implement
the callback.
Signed-off-by: Rundong Ge <rdong.ge@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix coccinelle warning:

./drivers/net/phy/mdio_bus.c:51:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44
./drivers/net/phy/mdio_bus.c:52:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44

fix this by using IS_ERR before PTR_ERR

Fixes: bafbdd52 ("phylib: Add device reset GPIO support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The IP2ME packet trap is triggered by packets hitting local routes.
After evaluating current defaults used by the driver it was decided to
reduce the amount of traffic generated by this trap to 1Kpps and
increase the burst size. This is inline with similarly deployed systems.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This file does not use hweight*() at all, and the definition is
surrounded by #if 0 ... #endif.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for you net-next
tree:

1) Missing NFTA_RULE_POSITION_ID netlink attribute validation,
   from Phil Sutter.

2) Restrict matching on tunnel metadata to rx/tx path, from wenxu.

3) Avoid indirect calls for IPV6=y, from Florian Westphal.

4) Add two indirections to prepare merger of IPV4 and IPV6 nat
   modules, from Florian Westphal.

5) Broken indentation in ctnetlink, from Colin Ian King.

6) Patches to use struct_size() from netfilter and IPVS,
   from Gustavo A. R. Silva.

7) Display kernel splat only once in case of racing to confirm
   conntrack from bridge plus nfqueue setups, from Chieh-Min Wang.

8) Skip checksum validation for layer 4 protocols that don't need it,
   patch from Alin Nastac.

9) Sparse warning due to symbol that should be static in CLUSTERIP,
   from Wei Yongjun.

10) Add new toggle to disable SDP payload translation when media
    endpoint is reachable though the same interface as the signalling
    peer, from Alin Nastac.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warning:

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:2431:5: warning:
 symbol 'hclge_set_all_vf_rst' was not declared. Should it be static?

Fixes: aa5c4f17 ("net: hns3: add reset handling for VF when doing PF reset")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function meth_init_tx_ring() is called from meth_tx_timeout(),
in which spin_lock is held, so we should use GFP_ATOMIC instead.

Fixes: 8d4c28fb ("meth: pass struct device to DMA API functions")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch sets an error message in extack when the number of qdisc
handles exceeds the maximum. Also the error-code ENOSPC is more
appropriate than ENOMEM in this situation.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reported-by: Li Shuang <shuali@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PHY core expects PHY drivers not to set Pause and Asym_Pause bits,
unless the driver only wants to specify one of them due to HW
limitation. In the case of the Marvell10g driver, we don't need to set
them.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>