- 29 Jan, 2009 40 commits
-
-
Abhijeet Kolekar authored
The patch renames iwl3945 specific variables in iwl3945_priv structure. iwl3945_priv structure differs with iwl_priv structure with these variables. Goal of this patch is to make transition from iwl3945_priv to iwl_priv smoothly. Signed-off-by:
Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Abhijeet Kolekar authored
The patch makes changed necessary to use iwl_hw_params to replace iwl3945_driver_hw_info. Signed-off-by:
-
Abhijeet Kolekar authored
The patch replaces iwl3945_rx_queue with iwl_rx_queue. Signed-off-by:
-
Abhijeet Kolekar authored
The patch replaces iwl3945_rx_mem_buffer with iwl_rx_mem_buffer. Signed-off-by:
-
Wu Fengguang authored
This patch beautifies macros in iwl-debug.h. Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Kolekar, Abhijeet authored
The patch replaces iwl3945_broadcast_addr with iwl_bcast_addr for 3945. Signed-off-by:
-
Kolekar, Abhijeet authored
The patch renames and deletes duplicate structure from iwl-3945.h. The following structures are renamed with iwlwifi counterparts: 1) iwl3945_ac_qos 2) iwl3945_ucode 3) iwl3945_qos_capabity Signed-off-by:
-
Kolekar, Abhijeet authored
The patch moves few structres from iwl-3945.h to iwl-dev.h. Signed-off-by:
-
Kolekar, Abhijeet authored
The patch replaces iwl_3945_cfg with iwl_cfg for 3945. Signed-off-by:
-
Kolekar, Abhijeet authored
Use iwl-core.h instead of iwl-3945-core.h. Signed-off-by:
-
Kolekar, Abhijeet authored
Change IWLWIFI_VERSION to IWL3945_VERSION. Signed-off-by:
-
Winkler, Tomas authored
This patch removes empty iwl3945_mac_get_stats mac80211 handler. Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Samuel Ortiz authored
This patch replaces the queue and channel info 3945 structures with the iwl ones. The initial goal was to replace the channel info structure. Once we do that, and then include iwl-dev.h instead of iwl-3945.h, we still get build errors due to several routines and macro redefinitions. This is why this patch also includes: - TFD39_MAX_PAYLOAD definition for 3945. - CMD_SIZE, CMD_HUGE, CMD_SKB duplication removal. - iwl3945_queue replacement in order to also get rid of the duplicated get_cmd_index routine. Getting rid of any of those needs the iwl-dev.h inclusion which then creates build errors due to definitions duplication. This is why we include all those in the same patch. Signed-off-by:
Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Samuel Ortiz authored
Most of the power (not TX power, but power management) structures and definitions are duplicated accross iwl-power.h and iwl-3945.h. We should try to only use the iwl header. Signed-off-by:
-
Samuel Ortiz authored
The duplicated LED definitions prevent one from including iwl-dev.h from the 3945 specific C files. Moreover, we are sharing many definitions between iwl-3945-led.h and iwl-led.h, so let's just use the iwl one. Note that this file will get more cleanups once we share a common iwl_priv structure. Signed-off-by:
-
Samuel Ortiz authored
A lot of rate relates definition are shared between iwl-3945-rs.h and iwl-agn-rs.h. Let's just use the agn version, and add the 3945 specific constants there. Signed-off-by:
-
Samuel Ortiz authored
SRAM addresses are different for 3945, 4065, and 5000, let's give them different names. Also, the RSSI_OFFSET is different for 3945 and 4965, thus they should be named differently. Signed-off-by:
-
Samuel Ortiz authored
The corresponding iwl structure is identical. Signed-off-by:
-
Samuel Ortiz authored
As DRV_NAME is defined in 2 different header files, including both is not possible. This patch defines this constant from iwl3945-base.c and iwl-agn.c. It also redefines the IWL_ERROR and IWL_WARNING macros to use dev_printk, as the IWL_DEBUG_* macros do. Signed-off-by:
-
Samuel Ortiz authored
At the cost of adding a debug_level field to iwl3945_priv, we are now able to get rid of iwl-3945-debug.h, and use iwl-debug.h instead. Signed-off-by:
-
Tomas Winkler authored
This patch remove iwl-3945-commands.h eliminating duplicated and moving all definitions to iwl-commands.h Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Tomas Winkler authored
This patch replaces union tsf with u64 This also allows to use iwl_error_res and iwl_rxon_time_cmd instead of 3945 structures Signed-off-by:
-
Tomas Winkler authored
This patch remove trivial (renames) commands and defines from iwl-3945-commands.h Signed-off-by:
-
Tomas Winkler authored
This patch uses iwl-commands.h also for iwl3945 more clean ups are required but this get to stage where it compiles cleanly. Most massive changes are in spectrum and power managment. Signed-off-by:
-
Winkler, Tomas authored
This patch removes current_rate from station_entry it was write only variable Signed-off-by:
-
Tomas Winkler authored
This patch unfolds includes of iwl-3945-commands.h Signed-off-by:
-
Tomas Winkler authored
This patch moves 3945 definitions into iwl-3945-fh.h It renames FH_ to FH39 to help inclusion of 3945 into iwlcore framework Signed-off-by:
-
Vivek Natarajan authored
Since the station info is flushed before calling set_disassoc in ieee80211_stop, the power save timer is never cancelled when the driver is unloaded. Hence the timer cancellation has to be done in ieee80211_stop itself. Signed-off-by:
Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by:
-
Vivek Natarajan authored
This patch enables mac80211 to send a null frame and also to check for tim in the beacon if dynamic power save is enabled. Signed-off-by:
-
Vivek Natarajan authored
a) hw_config() should not be called from siwpower() for the drivers which do not support dynamic powersave. b) IEEE80211_HW_NO_STACK_DYNAMIC_PS needs to be verified in set_associated() also before enabling the power save timers. Signed-off-by:
-
Vivek Natarajan authored
When a null data frame is generated from mac80211, it goes through master_start_xmit and not through subif_start_xmit. Hence for the power save timer to be triggered while sending this null data frame also, the timer has to be reset from master_start_xmit. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
As TKIP is not updated to new security needs which arise when TKIP is used to encrypt A-MPDU aggregated data frames, IEEE802.11n does not allow any cipher other than CCMP (Which has new extensions defined) as pairwise cipher between HT peers. When such configuration (TKIP/WEP in HT) is forced, we still associate in non-HT mode (11a/b/g). Signed-off-by:
Vasanthakumar Thiagarajan <vasanth@atheros.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
David Kilroy authored
Added mappings for FHSS, DSSS and OFDM channels - with macros to point HR DSSS and ERP to the DSSS mappings. Currently just static inline functions. Use the new functions in the older fullmac drivers. This eliminates a number of const static buffers and removes a couple of range checks that are now redundant. Signed-off-by:
David Kilroy <kilroyd@googlemail.com> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by:
Richard Farina <sidhayn@gmail.com> Acked-by:
Jeroen Vreeken <pe1rxq@amsat.org> Signed-off-by:
-
Nick Kossifidis authored
* Don't scale power values on RF5111 EEPROMs because they get out of bounds (power is u8, so multiplying power by 50 is too much and there is no reason to do so -we don't do it on other chips anyway-). HAL does it as a technique to handle 0.5 dbm steps but i believe it's not the right thing to do and certainly not the right place to do it. We 'll work this out on interpolation code for all chips (0.5 or 0.25 steps etc) in a generic way. Signed-Off-by:
Nick Kossifidis <mickflemm@gmail.com> Signed-off-by:
-
Winkler, Tomas authored
This patch kills retry_rate in sysfs for iwlagn. It's not used. Signed-off-by:
-
Winkler, Tomas authored
This patch moves priv->status sysfs entry to debugfs. It is for debugging only anyway. Signed-off-by:
-
Christian Lamparter authored
This patch enables frame injection in monitor mode for all p54 devices. As a result, any user can finally use the aircrack-ng suite out of the box. e.g: aireplay-ng --test wlan0 Trying broadcast probe requests... Injection is working! Found 1 AP Trying directed probe requests... XX:XX:XX:XX:XX:XX - channel: i - 'SSID' Ping (min/avg/max): 1.536ms/3.193ms/4.377ms Power: 193.00 30/30: 100% Signed-off-by:
Christian Lamparter <chunkeey@web.de> Signed-off-by:
-
Christian Lamparter authored
This patch introduce new shiny named labels for our 8 (4 - on old firmware) queues. Signed-off-by:
-
Nick Kossifidis authored
*Read misc2...6 values from eeprom since we want to use them (fixes wrong power calibration info offset on RF2413+ chips) *Initialize num_piers to 0 for RF2413 chips (note that we read 2GHz frequency piers while reading mode sections, we have to ignore them -usualy they are 0xff anyway but during my tests i got a 1 on b mode with no data- and use the newer eemap. *Add some more comments (please forgive my poor English ;-( ) and some minor code cleanup *Tested on 2425 and 2112 and has the same data with ath_info (i wrote some debug code on debug.c to print everything like ath_info but i haven't tested it yet on 5111 and it's full of > 80 col lines, if anyone wants to play with it let me know). Signed-Off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Ivo van Doorn authored
Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
