AC97 Codec
This adds a mixer control for an undocumented bit of the STAC9708
that somehow affects the analog output.  This should help reducing
the distortion at high output levels on ymfpci and SBLive cards.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

MPU401 UART
Correctly check for error codes returned by pnp_register_driver,
use a common function for registering the sound card, and remove
many #ifdef's.
Signed-off-by: Matthieu Castet <castet.matthieu@free.fr>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

EMU10K1/EMU10K2 driver
This patch should add support for 96Khz 'direct SPDIF' aka 'SPDIF
Bypass' (not P16V) playback mode available on the Audigy1 and 2 and
newer SBLives (?).  It lets you bypass the 48khz DSP resampling when
using the card in digital mode.  It also adds 96khz analog playback
support, good for testing but less interesting because it's downsampled
to 48khz.  A new mixer control 'Audigy SPDIF Output Sample Rate' is
created, you can choose 44100, 48000, or 96000.  Standard SPDIF
playback, AC3 passthrough (real 96khz playback), and analog playback
(96khz is resampled to 48khz in the DSP) all work with a 16 bit,96khz
wav file.  Only the last was tested due to lack of any SPDIF hardware.

This was derived mostly from the opensource.creative.com driver.  All
that was needed for 96khz playback to work in analog mode was changing
the format to 8000_96000 (looks like the creative driver supports 192khz
too).  And, of course this sample rate has always been supported (albeit
downsampled) because if you have 48khz samples in a soundfont the
envelope engine has to be able to pitch shift them in both directions.

I still have not been able to figure out how to get 24 bit playback to
work.  This is possible, independent of the P16V, for spdif and analog
24/48 playback via the DSP.  I do know how to access the full 24 bits
from the ADC from within the DSP, just not how to get it in there.  For
one thing I have no idea which 24 bit format it supports.  Some of them
seemed to work with JACK but produced noise.

This was generated with my multichannel patch but it applies against
ALSA CVS as well.
Signed-off-by: Lee Revell <rlrevell@joe-job.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AMD InterWave driver
Emmanuel Colbus sent this patch one month ago with the following
description:

There is a trivial bug in the file sound/isa/gus/interwave.c .
The variable isapnp is defined only if CONFIG_PNP is enabled, but it is
always used few lines after.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AC97 Codec
Bind master and HP controls when hp_only quirk is given, instead
of removing master control.  This fixes the problem of some laptops
which require sync'ed volume for PC-speaker and headphone output.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALS100 driver
This patch fixes issue when opl3 device couldn't be found
due to numbering of devices in pnp card, because search of
opl3 device started from mpu device, which could have number
greater than opl3 could.

Example:
MPU is 00:01.03
and
OPL is 00:01.01
Signed-off-by: Anton Romanov <theli@ukr.net>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

OPL3SA2 driver
Fixed a logic error that prevented the 'isapnp=0' module
parameter from taking effect.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

Documentation,MPU401 UART
Replace the ACPI PnP code with generic PnP calls.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

Intel8x0 driver
Added ac97_quirk for Fujitsu S6210.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

BT87x driver
Added __iomem prefix to the mmio pointer.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA<-OSS sequencer
Use wait_event_interruptible_timeout() instead of deprecated
interruptible_sleep_on_timeout().
Signed-off-by: Takashi Iwai <tiwai@suse.de>

GUS Library
Replace deprecated interruptible_sleep_on_timeout() with
wait_event_timeout(). Code is not identical, as the current sleeping
system is 1 jiffy at a time checking atomic_read()'s return every
iteration. Patch is compile-tested.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

KORG1212 driver
This patches covers the following issues:

    - solves double 'spin_lock_irqsave' problems;
    - eliminate the use of deprecated function 'sleep_on_timeout';
    - clarify some 'printk' messages; and
    - logs korg DMA Errors due to PCI congestion.
Signed-off-by: Haroldo Gamal <gamal@alternex.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

USB generic driver
Rewrote USB MIDI protocol handling code to use callbacks
for each protocol;
added support for Novation and MOTU protocols;
changed detection code to allow interrupt endpoints.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

USB generic driver
This makes the bit counting code smaller and simpler.
Signed-off-by: Charles C. Bennett <ccb@acm.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

EMU10K1/EMU10K2 driver
This patch changes the emu10k1 multichannel capture device (hw:x,2) to
capture the 16 external inputs by default.  This involves adding DSP
code to route the EXTINs to the FXBUS2 (EFX capture) channels and
setting the corresponding FXWC bits by default.

This allows capturing multiple inputs simultaneously.  It completely
bypasses the capture controls of the mixer.  With my Audigy2 ZS I can
capture LineIn, Line2, and Aux2 at the same time (6 channels).
Signed-off-by: Lee Revell <rlrevell@joe-job.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Maestro3 driver
Added a quirk entry for LEGEND ZhaoYang 3100CF.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

RawMidi Midlevel
Use wai_event_interruptible_timeout() instead of deprecated
interruptible_sleep_on_timeout(). Patch is compile-tested.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA Core
This properly indents the sound menu.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

RME HDSP driver
* Prevents the creation of a second midi device for cards with only
  one midi I/O
Signed-off-by: Thomas Charbonnel <thomas@undata.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

PCM Midlevel
Fix 32-bit calls to snd_pcm_channel_info().
Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

PPC PMAC driver
Fixed the forgotten caller of suspend/resume callbacks to follow
the recent PM fixes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Intel8x0 driver
Patch-level: High
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Intel8x0 driver
Patch-level: High
Signed-off-by: Wei Ni <Wei.Ni@uli.com.tw>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

ALSA Core
Fix the suspend/resume callback functions to follow the last change.
(This fix was missing in the last patch.)
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA Core
Added the missing inclusion of linux/pm.h.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

HDA Codec driver
Fixed resume callback to follow the recent change of PM callbacks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

USB USX2Y
Removed an unused variable to fix a compile warning.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation
Fixed the descriptions about suspend/resume callbacks.
The suspend callback takes pm_message_t argument, and resume takes no
extra argument now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

SA11xx UDA1341 driver,Control Midlevel,ALSA Core,Digigram VX core
ES18xx driver,OPL3SA2 driver,AD1848 driver,CS4231 driver,ATIIXP driver
ATIIXP-modem driver,CS4281 driver,ES1938 driver,ES1968 driver
Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,VIA82xx driver
VIA82xx-modem driver,ALI5451 driver,CS46xx driver,HDA Codec driver
HDA Intel driver,NM256 driver,Trident driver,YMFPCI driver
PDAudioCF driver,Digigram VX Pocket driver,PPC PMAC driver
Fixes by Pavel Machek <pavel@suse.cz>:
suspend() routines no longer get u32 as their parameter (they get
pm_message_t, which is u32 for now, but will change in 2.6.12 or
so). This fixes ALSA to notice this, and uses constants with right
types where appropriate. It results in no code changes. [Best results
will be when patching against latest -mm, you may get some warnings if
you patch it into older kernel, but it should still do the right
thing.] Please apply,
							Pavel

[In addition, suspend callback type is changed to follow to the standard
 style taking no state argument -- Takashi]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

USB generic driver
use the vendor/product IDs in the state structure instead of
reading them again from the device
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

Documentation,ATIIXP-modem driver,BT87x driver,Intel8x0-modem driver
VIA82xx-modem driver
Set the default index value of modem and bt87x drivers to -2 so that
the first slot is excluded when no index option is given.
This gives other uadio drivers a chance to put them as the primary
driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation,ALSA Core
Currently arguments of the 'index' option from 0 through SNDRV_CARDS-1
force a module to take the specified index. Index -1 makes the module
take the first available index. This patch extends this convention so
that a negative index value is interpreted as a bitmask of the
permitted indexes. Special cases:

    -1 0xffffffff 0 and up
    -2 0xfffffffe 1 and up
    -4 0xfffffffc 2 and up
    ...

The patch includes also corrections of ALSA-Configuration.txt document.
Signed-off-by: Thomas Hood <jdthood@yahoo.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

EMU10K1/EMU10K2 driver
Changes 'Music' to 'Synth' in mixer control names
Signed-off-by: Lee Revell <rlrevell@joe-job.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation,RME HDSP driver
* init sequence cleanup and firmware upload related bugfixes
* more robust revision detection scheme
  (should transparently handle new revisions)
* allow hdsploader and the kernel fw loader to coexist
  this is useful for cardbus user who compiled the driver in-kernel
  (userspace may not be ready to upload the firmware when the card
   is probed)
* removed confusing and obsolete passthru option (was interfering
  with the mixer when opening the device for capture or playback)
  this change requires a recompile of the userspace tools against
  the patched hdsp.h
* removed confusing and obsolete line_outs_monitor module param
* made precise_ptr the default behaviour, and runtime tweakable
  (removed corresponding module param)
* add an alsa ctl to disable the use of the midi tasklet, and
  process midi data in the interrupt handler
  (using the tasklet is still the default)
  this is mainly intended for users of Ingo Molnar's RT patch
* metering fix for Multiface/Digiface users (closes ALSA BUG #0000801)
* small endianness fix
* ALSA-Configuration.txt HDSP entry update
* error messages cleanup
Signed-off-by: Thomas Charbonnel <thomas@undata.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

SA11xx UDA1341 driver,ALSA Core,ISA
Removed pm_register() and pm_unregister().
Use platform_device for suspend/resume, instead.

The current implemention is still a hack.  The whole ISA drivers should
be rewritten with a proper bus definition.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation
Removed descriptions of obsolete irq_mask and irq_list options for
vxpocket, vxp440 and pdaudiocf drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

RME HDSP driver
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

    
ALSA Core
Added the newline to printk error output.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Removed include/sound/version.h~