- 22 Dec, 2013 4 commits
-
-
git://github.com/at91linux/linux-at91Olof Johansson authored
From Nicolas Ferre: Second DT pull-request for 3.14 - now that PWM driver is on its way to mainline, we can integrate the DT entries - As an example, use PWM for at91sam9m10g45ek leds - Addition of clock specification for newly introduced crypto DT entries * tag 'at91-dt2' of git://github.com/at91linux/linux-at91: ARM: at91/dt: add clk properties to sama5d3 TDES device node ARM: at91/dt: add clk properties to sama5d3 AES device node ARM: at91/dt: add clk properties to sama5d3 SHA device node ARM: at91: at91sam9m10g45ek: switch to PWM leds ARM: at91: add PWM device node Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: Samsung DT updates for v3.14 - Add support Octa Cores for exynos5420 : populate CPU node entries to 8 Cores : extend mct to support 8 local interrupts - Update dwmmc nodes for exynos5250 and exynos5420 : change status property of dwmmc nodes for exynos5250 : move dwmmc nodes from exynos5 to exynos5250 because it's different between exynos5250 and exynos5420 : rename mmc nodes from dwmmc for exynos5 SoCs : add dwmmc nodes for exynos5420 - Add G-Scaler nodes for exynos5420 - Add HS-i2c nodes in exynos5420 : High Speed I2C 7 channels (4 to 10) - Update sysreg binding and node name in exynos4 - Update min voltage on exynos5250-arndale - Move fifo-depth property from boards to exynos5250 SoC : because the fifo-depth property is SoC specific * tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Update Samsung sysreg binding document ARM: dts: Fix sysreg node name in exynos4.dtsi ARM: dts: Add hs-i2c nodes to exynos5420 ARM: dts: Update min voltage for vdd_arm on Arndale ARM: dts: populate cpu node entries to 8 cpus for exynos5420 clocksource: mct: extend mct to support 8 local interrupts for Exynos5420 ARM: dts: Add device nodes for GScaler blocks for exynos5420 ARM: dts: Add dwmmc DT nodes for exynos5420 SOC ARM: dts: rename mmc dts node for exynos5 series ARM: dts: Move fifo-depth property from exynos5250 board dts ARM: dts: change status property of dwmmc nodes for exynos5250 ARM: dts: Move dwmmc nodes from exynos5.dtsi to exynos5250.dtsi Signed-off-by:
-
Jonas Jensen authored
Add a generic (dtsi) include file for MOXA ART SoCs. Also add a file for UC-7112-LX. Signed-off-by:
Jonas Jensen <jonas.jensen@gmail.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
git://git.xilinx.com/linux-xlnxOlof Johansson authored
From Michal Simek: arm: Xilinx Zynq dt patches for v3.14 - Add gem support - Add cpus node - TTC cleanup * tag 'zynq-dt-for-3.14' of git://git.xilinx.com/linux-xlnx: arm: dt: zynq: Add 'cpus' node arm: dt: zynq: Remove 'clock-ranges' from TTC nodes ARM: zynq: add gem support Signed-off-by:
-
- 20 Dec, 2013 2 commits
-
-
Kevin Hilman authored
Merge tag 'renesas-dt-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Renesas ARM based SoC DT updates for v3.14 * Global - Use interrupt macros - Use #include in device tree sources - Tidyup DT node naming * emev2 (Emma Mobile EV2) SoC - Setup internal peripheral interrupts as level high - Use interrupt macros in DT files - Add clock tree description in DT * r8a7791 (R-Car M2) SoC - Correct GPIO resources * r8a7791 (R-Car M2) based Koelsch board - Configure PFC and GPO - Use r8a7791 suffix for IRQC compat string - Add DT reference * r8a7790 (R-Car H2) based Lager board - Include all 4 GiB of memory - Use r8a7790 suffix for IRQC and MMCIF compat strings - Enable MMCIF - Add default PFC settings * r8a7778 (R-Car M1) SoC - Suffix for INTC compat string - Add HSPI, MMCIF, SDHI and I2C suppport on DTSI - Correct pin control device addresses * r8a7778 (R-Car M1) based Bock-W board - Use falling edge IRQ for LAN9221 in DT reference - Enable I2C, HSPI0, MMCIF and SDHI - Correct MMC pin conflict - Remove manual PFC settings from DT reference - Add default PFC settings * r8a7779 (R-Car H1) SoC - Add HSPI and SDHI support - Suffix for INTC compat string * r8a7779 (R-Car H1) based Marzen board - Enable HSPI0 and SDHI in DTS - Remove SDHI0 WP pin setting - Use falling edge IRQ for LAN9221 in DT reference - Add SDHI support * r8a7740 (R-Mobile A1) SoC - Suffix for INTC compat string - Add FSI support via DTSI - Use interrupt macros * r8a7740 based Armadillo board - Add FSI support for DTS - Use low level IRQ for ST1231 in DT reference * r8a73a4 (SH-Mobile APE6) SoC - Use interrupt macros in DT files * r8a73a4 (R-Mobile APE6) based ape6evm board - Include all 2 GiB of memory * r8a73a0 (SH-Mobile AG5) SoC - Correct SDHI compat string * r8a73a0 (SH-Mobile AG5) based kzm9d board - Add GPIO keys and Add PCF8575 GPIO extender to DT - Enable DSW2 with gpio-keys - Use falling edge IRQ for LAN9221 in DT reference * tag 'renesas-dt-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (102 commits) ARM: shmobile: marzen: enable HSPI0 in DTS ARM: shmobile: r8a7779: add HSPI support to DTSI ARM: shmobile: Use r8a7779 suffix for INTC compat string ARM: shmobile: Use r8a7778 suffix for INTC compat string ARM: shmobile: Use r8a7740 suffix for INTC compat string ARM: shmobile: Use sh73a0 suffix for INTC compat string ARM: shmobile: armadillo: add FSI support for DTS ARM: shmobile: r8a7740: add FSI support via DTSI ARM: shmobile: emev2: Setup internal peripheral interrupts as level high ARM: shmobile: emev2: Use interrupt macros in DT files ARM: shmobile: Use interrupt macros in r8a73a4 and r8a7778 DT files ARM: shmobile: Fix r8a7791 GPIO resources in DTS ARM: shmobile: Include all 4 GiB of memory on Lager DT Ref ARM: shmobile: Include all 4 GiB of memory on Lager ARM: shmobile: Include all 2 GiB of memory on APE6EVM ARM: shmobile: Include all 2 GiB of memory on APE6EVM DT Ref ARM: shmobile: kzm9g-reference: Add GPIO keys to DT ARM: shmobile: kzm9g-reference: Add PCF8575 GPIO extender to DT ARM: shmobile: Koelsch DT reference GPIO LED support ARM: shmobile: Enable DSW2 with gpio-keys on KZM9D ... Signed-off-by:
Kevin Hilman <khilman@linaro.org>
-
Kevin Hilman authored
Merge tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt Keystone DTS updates for 3.14 - ddr3 pll clock node typo fixup. - EVM specific clock setting with board k2hk-evm.dts. - GIC node updates for missing virtualisation info. - Adding USB dwc3 and phy nodes. * tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone: Add usb devicetree bindings ARM: dts: keystone: Add usb phy devicetree bindings ARM: dts: keystone: Add guestos maintenance interrupt ARM: dts: keystone: Add the GICV and GICH address space ARM: keystone: dts: add paclk divider clock node ARM: keystone: dts: fix typo in the ddr3 pllclk node name ARM: keystone: dts: add a k2hk-evm specific dts file Signed-off-by:
-
- 19 Dec, 2013 8 commits
-
-
Kevin Hilman authored
* mvebu/dt-4: ARM: mvebu: sort DT nodes by address ARM: orion5x: sort DT nodes by address ARM: dove: sort DT nodes by address ARM: kirkwood: sort dt nodes by address Signed-off-by: -
Boris BREZILLON authored
Signed-off-by:
Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com>
-
Boris BREZILLON authored
Signed-off-by:
-
Boris BREZILLON authored
Signed-off-by:
-
Bo Shen authored
The d6 and d7 is connected to PWM, we can use PWM to control it, so switch to PWM leds. Signed-off-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
-
Bo Shen authored
Add PWM device node for AT91 series SoC. Signed-off-by:
-
git://git.infradead.org/linux-mvebuKevin Hilman authored
From Jason Cooper: mvebu DT changes for v3.14 (incr. #3) - kirkwood - use symbolic names for gpios and key inputs - mvebu - add the pxa nand controller to the ReadyNAS and A370-RD boards * tag 'mvebu-dt-3.14-3' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Enable NAND controller in A370 Reference Design board ARM: mvebu: Enable NAND controller in ReadyNAS 2120 .dts file ARM: mvebu: Enable NAND controller in ReadyNAS 104 .dts file ARM: mvebu: Enable NAND controller in ReadyNAS 102 .dts file ARM: DT: Kirkwood: Use symbolic names from gpio.h ARM: DT: Kirkwood: Use symbolic names from input.h Signed-off-by: -
Kevin Hilman authored
Merge tag 'nomadik-dt-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt From Linus Walleij: Some Nomadik Device Tree updates for the v3.14 cycle: - Drop 0x prefixes - Get rid of explicit GPIO management * tag 'nomadik-dt-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: nomadik: get rid of explicit ethernet GPIO management ARM: nomadik: Remove '0x's from nomadik stn8815 DTS file
-
- 15 Dec, 2013 11 commits
-
-
Sachin Kamat authored
Added a binding example for reference and updated the node name. While at it also removed the name description as it is not necessary. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
Sachin Kamat authored
Fix the name as per DT node naming convention. - rename the node to syscon which is a more generic name. - append the register value to the node name. Signed-off-by:
Tomasz Figa <t.figa@samsung.com> Reviewed-by:
-
Sachin Kamat authored
Added high speed I2C nodes to Exynos5420 DT file. Signed-off-by:
-
Sachin Kamat authored
The minimum recommended ARM voltage for Exynos5250 at 200MHz on Arndale board is 0.9125V. Update accordingly. Signed-off-by:
-
Chander Kashyap authored
Exynos5420 is octa-core SoC from Samsung. Hence populate all the CPU node entries. Signed-off-by:
Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by:
-
Chander Kashyap authored
Exynos5420 is octa-core SoC from Samsung. Hence extend exynos-mct clocksource driver to support 8 local interrupts. Also extend dts entries for 8 interrupts. Signed-off-by:
-
Leela Krishna Amudala authored
Adds G-Scaler device nodes to the DT device list Signed-off-by:
Leela Krishna Amudala <l.krishna@samsung.com> Reviewed-by:
-
Yuvaraj Kumar C D authored
This patch adds the mmc device tree node entries for exynos5420 SOC. Exynos5420 has a different version of DWMMC controller,so a new compatible string is used to distinguish it from the prior SOC's. Signed-off-by:
Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Signed-off-by:
-
Yuvaraj Kumar C D authored
This patch rename's the device tree mmc node's from "dwmmc" to "mmc". According to ePAPR chapter 2.2.2 generic node name recommendation, it has been opted change from dwmmc to mmc.Also this patch remove the instance index from the node name. Signed-off-by:
-
Yuvaraj Kumar C D authored
As fifo-depth property in dw_mmc device tree node is SOC specific, move this property to exynos5250 SOC specific file. Signed-off-by:
-
Yuvaraj Kumar C D authored
According to ePAPR, chapter 2.3.4, the status property has defined that it should be set to "disabled" when "the device is not presently operational, but it might become operational in the future". So this patch disable dwmmc node by "status = disabled" in SOC dts file and enable dwmmc node by "status = okay" in board specific dts file. Signed-off-by:
-
- 13 Dec, 2013 7 commits
-
-
WingMan Kwok authored
Added device tree support for TI's Keystone USB driver and updated the Documentation with device tree binding information. Signed-off-by:
WingMan Kwok <w-kwok2@ti.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@ti.com>
-
WingMan Kwok authored
Added device tree support for TI's Keystone USB PHY driver and updated the Documentation with device tree binding information. Signed-off-by:
-
Santosh Shilimkar authored
Update the Keystone gic device tree entry to add the maintenance interrupt information. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: -
Santosh Shilimkar authored
Update the Keystone gic node to add the GICV and GIGH address space needed by the KVM. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: -
Murali Karicheri authored
PA subsystem has a fixed factor clock at the input which is input clock divided by 3. This patch adds this clock node to dts Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
-
Murali Karicheri authored
Fix following typo ddr3allclk -> ddr3apllclk ddr3bllclk -> ddr3bpllclk Signed-off-by:
-
Murali Karicheri authored
This patch adds K2 Kepler/Hawking evm (k2hk-evm) specific dts file. To enable re-use of bindings across multiple evms of this family, rename current keystone.dts to keystone.dtsi and include it in the evm specific dts file. K2 SoC has separate ref clock inputs for various clocks. So add separate ref clock nodes for ARM, DDR3A, DDR3B and PA PLL input clocks in k2hk-evm.dts. While at it, rename refclkmain to refclksys based on device User Guide naming convention Signed-off-by:
-
- 12 Dec, 2013 8 commits
-
-
Jason Cooper authored
Prevent future unnecessary merge conflicts Signed-off-by:Jason Cooper <jason@lakedaemon.net>
-
Jason Cooper authored
Prevent future unnecessary merge conflicts Signed-off-by: -
Jason Cooper authored
Prevent future (unnecessary) merge conflicts Signed-off-by: -
Jason Cooper authored
This has caused merge conflicts in the past. Signed-off-by: -
Ezequiel Garcia authored
Marvell's Armada 370 Reference Design has a NAND flash, so enable it in the devicetree and add the partitions as prepared in the factory images. In order to skip the driver's custom device detection and use only ONFI detection, the "marvell,keep-config" parameter is used. This is needed because we have no support for setting the timings parameters yet. Signed-off-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by:
-
Soren Brinkmann authored
Add a 'cpus' node to describe the CPU cores of Zynq. Signed-off-by:
Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by:
Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by:
Michal Simek <michal.simek@xilinx.com>
-
Soren Brinkmann authored
The bindings for the TTC changed in commit 'arm: zynq: Use standard timer binding' (e932900a). That change removed possible subnodes from this driver rendering the 'clock-ranges' property invalid for this node. Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Steffen Trumtrar authored
The zynq includes a Cadence GEM IP core. This is compatible with the macb driver. Add it to the zynq-7000 DT. Signed-off-by:
Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Josh Cartwright <josh.cartwright@ni.com> [soren: rebased to current Linus tree, added zc706 + zed support, moved phy-mode property to board level dtses] Signed-off-by:
-
