Fixes coccicheck warning:

drivers/gpu/drm/radeon/evergreen.c:4948:2-15: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes coccicheck warning:

drivers/gpu/drm/radeon/r600.c:3056:2-15: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes coccicheck warning:

drivers/gpu/drm/radeon/si.c:6475:2-15: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/radeon/si.c:6542:2-15: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes coccicheck warning:

drivers/gpu/drm/radeon/r100.c:1826:3-31: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/radeon/r100.c:1828:3-31: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/radeon/r100.c:2390:2-22: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/radeon/r100.c:2395:2-22: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add defined peak sclk for navi12 peak profile mode.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fetch the sclk from the pptable if there is no specified sclk for
the board.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Return value should be set when going to error handle tag
for error case, this can avoid potential invalid array
access by upper caller.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

FB location is already programmed by HV driver
for arcutus so remove this part
Signed-off-by: Frank.Min <Frank.Min@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. enable xgmi ta initialization for sriov
2. enable xgmi initialization for sriov
Signed-off-by: Frank.Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

IP discovery TMR(occupied the top VRAM with size DISCOVERY_TMR_SIZE)
has been reserved, and the p2c buffer is in the range of this TMR, so
the p2c buffer reservation is unnecessary.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The method of getting fb_loc changed from parsing VBIOS to
taking certain offset from top of VRAM
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes coccicheck warning:

drivers/gpu/drm/amd/amdgpu/navi10_ih.c:113:5-8: Unneeded variable: "ret". Return "0" on line 182
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ma Feng <mafeng.ma@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes coccicheck warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1036:5-8: Unneeded variable: "ret". Return "0" on line 1079
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ma Feng <mafeng.ma@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add mmSDMA2-7_EDC_COUNTER to support Arcturus
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add mmCOMPUTE_STATIC_THREAD_MGMT_SE4-7 to support Arcturus
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Replace ARRAY_SIZE with size variables to support
different ASICs.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Arcturus has 8 SEs. Add mmCOMPUTE_STATIC_THREAD_MGMT_SE4-7
for EDC GPR _workarounds,
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Devices newer then VEGA10/12 shall have these programming sequences performed by PSP BL
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

max range of the agp aperture is 48 bits, so
enlarge agp_start address into 48bit with all bits set
Signed-off-by: Frank.Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

currently using TMR loading VCN fw MMSCH would fail
to init after FLR, just disable ib test for temporarily
daily testing, continuing debug with mm team.
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This workaround does not affect other asics because amdgpu only need expose
one gfx sched to user for now.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The DF routines to arm xGMI performance will attempt to re-arm both on
performance monitoring start and read on initial failure to arm.
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

During DF C-State, Perfmon counters outside of range 1D700-1D7FF will
encounter SLVERR affecting xGMI performance monitoring.  PerfmonCtr[7:4]
is being added to avoid SLVERR during read since it falls within this
range.  PerfmonCtl[7:4] is being added in order to arm PerfmonCtr[7:4].
Since PerfmonCtl[7:4] exists outside of range 1D700-1D7FF, DF routines
will be enabled to opportunistically re-arm PerfmonCtl[7:4] on retry
after SLVERR.
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Simplify padding calculations.

v2: Comment update and spacing.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Thunk driver would like to know the num_cp_queues data, however this data relied
on different asic specific. So it's better to get it from kfd driver.

v2: don't update name size.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Thunk driver would like to know the num_sdma_queues_per_engine data, however
this data relied on different asic specific. So it's better to get it from kfd
driver.

v2: don't update the name size.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Under sriov, the disable operation is no allowed.
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v1: compared to bare-metal: sriov support psp loading VCN firmware; only one
encoding ring would be used in each instance.
v2: keep unchange for bare-metal VCN2.5 hw_init, just add a flag with sriov
and also remove multiple lines.
v3: squash in warning fix
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v1: skip gating in serveral called functions by power gating and clock gating
v2: from suggestion, skip setting gate in both set function, which is where
it being called.
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Previously there is no VCN1 type ID in psp gfx interface. Also add VCN ip
block type unless the reinit after FLR for sriov would fail.
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use MMSCH V1 to finish Memory Controller
programming as well as start MMSCH to do
VCN2.5 initialization.
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use MMSCH to do the initialization since MMSCH
manages VCN2.5 instances and its world switch.
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Code refactor and no functional change.

Fixes: 4cf781c2 ("drm/amdgpu: Added RAS UMC error query support for Arcturus")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For udelay.  This is needed for some platforms.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazluaskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To protect access to the metrics table.

v2: unlock on error

Bug: https://gitlab.freedesktop.org/drm/amd/issues/900Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To protect access to the metrics table.

v2: unlock on error

Bug: https://gitlab.freedesktop.org/drm/amd/issues/900Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To protect access to the metrics table.

v2: unlock on error

Bug: https://gitlab.freedesktop.org/drm/amd/issues/900Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To protect access to the metrics table.

v2: unlock on error

Bug: https://gitlab.freedesktop.org/drm/amd/issues/900Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This table is used for lots of things, add it's own lock.

Bug: https://gitlab.freedesktop.org/drm/amd/issues/900Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

this set adds support for removal of gpu drm dead code.

patch3 is similar with patch 1:
`num` is a data of u8 type and ATOM_MAX_HW_I2C_READ == 255,

so there is a impossible condition '(num > 255) => (0-255 > 255)'.
Signed-off-by: Pan Zhang <zhangpan26@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>