Pull more kvm updates from Paolo Bonzini:
 "The main batch of ARM + RISC-V changes, and a few fixes and cleanups
  for x86 (PMU virtualization and selftests).

  ARM:

   - Fixes for single-stepping in the presence of an async exception as
     well as the preservation of PSTATE.SS

   - Better handling of AArch32 ID registers on AArch64-only systems

   - Fixes for the dirty-ring API, allowing it to work on architectures
     with relaxed memory ordering

   - Advertise the new kvmarm mailing list

   - Various minor cleanups and spelling fixes

  RISC-V:

   - Improved instruction encoding infrastructure for instructions not
     yet supported by binutils

   - Svinval support for both KVM Host and KVM Guest

   - Zihintpause support for KVM Guest

   - Zicbom support for KVM Guest

   - Record number of signal exits as a VCPU stat

   - Use generic guest entry infrastructure

  x86:

   - Misc PMU fixes and cleanups.

   - selftests: fixes for Hyper-V hypercall

   - selftests: fix nx_huge_pages_test on TDP-disabled hosts

   - selftests: cleanups for fix_hypercall_test"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (57 commits)
  riscv: select HAVE_POSIX_CPU_TIMERS_TASK_WORK
  RISC-V: KVM: Use generic guest entry infrastructure
  RISC-V: KVM: Record number of signal exits as a vCPU stat
  RISC-V: KVM: add __init annotation to riscv_kvm_init()
  RISC-V: KVM: Expose Zicbom to the guest
  RISC-V: KVM: Provide UAPI for Zicbom block size
  RISC-V: KVM: Make ISA ext mappings explicit
  RISC-V: KVM: Allow Guest use Zihintpause extension
  RISC-V: KVM: Allow Guest use Svinval extension
  RISC-V: KVM: Use Svinval for local TLB maintenance when available
  RISC-V: Probe Svinval extension form ISA string
  RISC-V: KVM: Change the SBI specification version to v1.0
  riscv: KVM: Apply insn-def to hlv encodings
  riscv: KVM: Apply insn-def to hfence encodings
  riscv: Introduce support for defining instructions
  riscv: Add X register names to gpr-nums
  KVM: arm64: Advertise new kvmarm mailing list
  kvm: vmx: keep constant definition format consistent
  kvm: mmu: fix typos in struct kvm_arch
  KVM: selftests: Fix nx_huge_pages_test on TDP-disabled hosts
  ...

Merge tag 'perf-tools-for-v6.1-1-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools updates from Arnaldo Carvalho de Melo:

 - Add support for AMD on 'perf mem' and 'perf c2c', the kernel
   enablement patches went via tip.

   Example:

      $ sudo perf mem record -- -c 10000
      ^C[ perf record: Woken up 227 times to write data ]
      [ perf record: Captured and wrote 58.760 MB perf.data (836978 samples) ]

      $ sudo perf mem report -F mem,sample,snoop
      Samples: 836K of event 'ibs_op//', Event count (approx.): 8418762
      Memory access                  Samples  Snoop
      N/A                             700620  N/A
      L1 hit                          126675  N/A
      L2 hit                             424  N/A
      L3 hit                             664  HitM
      L3 hit                              10  N/A
      Local RAM hit                        2  N/A
      Remote RAM (1 hop) hit            8558  N/A
      Remote Cache (1 hop) hit             3  N/A
      Remote Cache (1 hop) hit             2  HitM
      Remote Cache (2 hops) hit           10  HitM
      Remote Cache (2 hops) hit            6  N/A
      Uncached hit                         4  N/A
      $

 - "perf lock" improvements:

     - Add -E/--entries option to limit the number of entries to
       display, say to ask for just the top 5 contended locks.

     - Add -q/--quiet option to suppress header and debug messages.

     - Add a 'perf test' kernel lock contention entry to test 'perf
       lock'.

 - "perf lock contention" improvements:

     - Ask BPF's bpf_get_stackid() to skip some callchain entries.

       The ones closer to the tooling are bpf related and not that
       interesting, the ones calling the locking function are the ones
       we're interested in, example of a full, unskipped callstack:

     - Allow changing the callstack depth and number of entries to skip.

           1     10.74 us     10.74 us     10.74 us     spinlock   __bpf_trace_contention_begin+0xb
                          0xffffffffc03b5c47  bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
                          0xffffffffc03b5c47  bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
                          0xffffffffbb8b8e75  bpf_trace_run2+0x35
                          0xffffffffbb7eab9b  __bpf_trace_contention_begin+0xb
                          0xffffffffbb7ebe75  queued_spin_lock_slowpath+0x1f5
                          0xffffffffbc1c26ff  _raw_spin_lock+0x1f
                          0xffffffffbb841015  tick_do_update_jiffies64+0x25
                          0xffffffffbb8409ee  tick_irq_enter+0x9e

     - Show full callstack in verbose mode (-v option), sometimes this
       is desirable instead of showing just one callstack entry.

 - Allow multiple time ranges in 'perf record --delay' to help in
   reducing the amount of data collected from hardware tracing (Intel
   PT, etc) when there is a rough idea of periods of time where events
   of interest take time.

 - Add Intel PT to record only decoder debug messages when error
   happens.

 - Improve layout of Intel PT man page.

 - Add new branch types: alignment, data and inst faults and arch
   specific ones, such as fiq, debug_halt, debug_exit, debug_inst and
   debug_data on arm64.

   Kernel enablement went thru the tip tree.

 - Fix 'perf probe' error log check in 'perf test' when no debuginfo is
   available.

 - Fix 'perf stat' aggregation mode logic, it should be looking at the
   CPU not at the core number.

 - Fix flags parsing in 'perf trace' filters.

 - Introduce compact encoding of CPU range encoding on perf.data, to
   avoid having a bitmap with all the CPUs.

 - Improvements to the 'perf stat' metrics, including adding
   "core_wide", and computing "smt" from the CPU topology.

 - Add support to the new PERF_FORMAT_LOST perf_event_attr.read_format,
   that allows tooling to ask for the precise number of lost samples for
   a given event.

 - Add 'addr' sort key to see just the address of sampled instructions:

      $ perf record -o- true | perf report -i- -s addr
      [ perf record: Woken up 1 times to write data ]
      [ perf record: Captured and wrote 0.000 MB - ]
      # Samples: 12  of event 'cycles:u'
      # Event count (approx.): 252512
      #
      # Overhead  Address
      # ........  ..................
          42.96%  0x7f96f08443d7
          29.55%  0x7f96f0859b50
          14.76%  0x7f96f0852e02
           8.30%  0x7f96f0855028
           4.43%  0xffffffff8de01087

      perf annotate: Toggle full address <-> offset display

 - Add 'f' hotkey to the 'perf annotate' TUI interface when in
   'disassembler output' mode ('o' hotkey) to toggle showing full
   virtual address or just the offset.

 - Cache DSO build-ids when synthesizing PERF_RECORD_MMAP records for
   pre-existing threads, at the start of a 'perf record' session,
   speeding up that record startup phase.

 - Add a command line option to specify build ids in 'perf inject'.

 - Update JSON event files for the Intel alderlake, broadwell,
   broadwellde, broadwellx, cascadelakex, haswell, haswellx, icelake,
   icelakex, ivybridge, ivytown, jaketown, sandybridge, sapphirerapids,
   skylake, skylakex, and tigerlake processors.

 - Update vendor JSON event files for the ARM Neoverse V1 and E1
   platforms.

 - Add a 'perf test' entry for 'perf mem' where a struct has false
   sharing and this gets detected in the 'perf mem' output, tested with
   Intel, AMD and ARM64 systems.

 - Add a 'perf test' entry to test the resolution of java symbols, where
   an output like this is expected:

       8.18%  jshell    jitted-50116-29.so    [.] Interpreter
       0.75%  Thread-1  jitted-83602-1670.so  [.] jdk.internal.jimage.BasicImageReader.getString(int)

 - Add tests for the ARM64 CoreSight hardware tracing feature, with
   specially crafted pureloop, memcpy, thread loop and unroll tread that
   then gets traced and the output compared with expected output.

   Documentation explaining it is also included.

 - Add per thread Intel PT 'perf test' entry to check that
   PERF_RECORD_TEXT_POKE events are recorded per CPU, resulting in a
   mixture of per thread and per CPU events and mmaps, verify that this
   gets all recorded correctly.

 - Introduce pthread mutex wrappers to allow for building with clang's
   -Wthread-safety, i.e. using the "guarded_by" "pt_guarded_by"
   "lockable", "exclusive_lock_function", "exclusive_trylock_function",
   "exclusive_locks_required", and "no_thread_safety_analysis" compiler
   function attributes.

 - Fix empty version number when building outside of a git repo.

 - Improve feature detection display when multiple versions of a feature
   are present, such as for binutils libbfd, that has a mix of possible
   ways to detect according to the Linux distribution.

   Previously in some cases we had:

      Auto-detecting system features
      <SNIP>
      ...                                  libbfd: [ on  ]
      ...                          libbfd-liberty: [ on  ]
      ...                        libbfd-liberty-z: [ on  ]
      <SNIP>

   Now for this case we show just the main feature:

      Auto-detecting system features
      <SNIP>
      ...                                  libbfd: [ on  ]
      <SNIP>

 - Remove some unused structs, variables, macros, function prototypes
   and includes from various places.

* tag 'perf-tools-for-v6.1-1-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (169 commits)
  perf script: Add missing fields in usage hint
  perf mem: Print "LFB/MAB" for PERF_MEM_LVLNUM_LFB
  perf mem/c2c: Avoid printing empty lines for unsupported events
  perf mem/c2c: Add load store event mappings for AMD
  perf mem/c2c: Set PERF_SAMPLE_WEIGHT for LOAD_STORE events
  perf mem: Add support for printing PERF_MEM_LVLNUM_{CXL|IO}
  perf amd ibs: Sync arch/x86/include/asm/amd-ibs.h header with the kernel
  tools headers UAPI: Sync include/uapi/linux/perf_event.h header with the kernel
  perf stat: Fix cpu check to use id.cpu.cpu in aggr_printout()
  perf test coresight: Add relevant documentation about ARM64 CoreSight testing
  perf test: Add git ignore for tmp and output files of ARM CoreSight tests
  perf test coresight: Add unroll thread test shell script
  perf test coresight: Add unroll thread test tool
  perf test coresight: Add thread loop test shell scripts
  perf test coresight: Add thread loop test tool
  perf test coresight: Add memcpy thread test shell script
  perf test coresight: Add memcpy thread test tool
  perf test: Add git ignore for perf data generated by the ARM CoreSight tests
  perf test: Add arm64 asm pureloop test shell script
  perf test: Add asm pureloop test tool
  ...

Pull pci updates from Bjorn Helgaas:
 "Resource management:

   - Distribute spare resources to unconfigured hotplug bridges at
     boot-time (not just when hot-adding such a bridge), which makes
     hot-adding devices to docks work better.

   - Revert to a BAR assignment inherited from firmware only when the
     address is actually reachable via any upstream bridges, which fixes
     some cases where firmware doesn't configure all devices.

   - Add a sysfs interface to resize BARs so this can be done before
     assigning devices to a VM through VFIO.

  Power management:

   - Disable Precision Time Management for all devices on suspend to
     enable lower-power PM state. We previously did this just for Root
     Ports, which isn't enough because downstream devices can still
     generate PTM messages, which cause errors if it's disabled in the
     Root Port.

   - Save and restore the ASPM L1 PM Substates configuration for
     suspend/ resume. Previously this configuration was lost, so L1.x
     states likely stopped working after resume.

   - Check whether the L1 PM Substates Capability exists. If it didn't
     exist, we previously read junk and tried to configure L1 Substates
     based on that.

   - Fix the LTR_L1.2_THRESHOLD computation, which previously set a
     threshold for entering L1.2 that was too low in some cases.

   - Reduce the delay after transitions to or from D3cold by using
     usleep_range() rather than msleep(), which often slept for ~19ms
     instead of the 10ms normally required. The spec says 10ms is
     enough, but it's possible we could trip over devices that need a
     little more.

  Error handling:

   - Work around a BIOS bug that caused Intel Root Ports to advertise a
     Root Port Programmed I/O (RP PIO) log size of zero, which caused
     annoying warnings and prevented the kernel from dumping log
     registers for DPC errors.

  Qualcomm PCIe controller driver:

   - Add support for SC8280XP and SA8540P host controllers and SM8450
     endpoint controller.

   - Disable Master AXI clock on endpoint controllers to save power when
     link is idle or in L1.x.

   - Expose link state transition counts via debugfs to help debug
     issues with low-power states.

   - Add auto-loading module support.

  Synopsys DesignWare PCIe controller driver:

   - Remove a dependency on ZONE_DMA32 by allocating the MSI target page
     differently. There's more work to do related to eDMA controllers,
     so it's not completely settled"

* tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (71 commits)
  PCI: qcom-ep: Check platform_get_resource_byname() return value
  PCI: qcom-ep: Add support for SM8450 SoC
  dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC
  dt-bindings: PCI: qcom-ep: Define clocks per platform
  PCI: qcom-ep: Make PERST separation optional
  dt-bindings: PCI: qcom-ep: Make PERST separation optional
  PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic
  PCI: Expose PCIe Resizable BAR support via sysfs
  PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation
  PCI/ASPM: Ignore L1 PM Substates if device lacks capability
  PCI/ASPM: Factor out L1 PM Substates configuration
  PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS
  PCI: qcom-ep: Expose link transition counts via debugfs
  PCI: qcom-ep: Disable IRQs during driver remove
  PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
  PCI/ASPM: Refactor L1 PM Substates Control Register programming
  PCI: qcom-ep: Make use of the cached dev pointer
  PCI: qcom-ep: Rely on the clocks supplied by devicetree
  PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure
  phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
  ...

Pull more i2c updates from Wolfram Sang:

 - correct a variable type in the new pci1xxxx driver

 - add a new SoC to the qcom-cci driver

 - fix an issue with the designware driver which now got enough testing

 - the aspeed driver now handles busy target backends better

* tag 'i2c-for-6.1-rc1-batch2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: aspeed: Assert NAK when slave is busy
  i2c: designware: Fix handling of real but unexpected device interrupts
  i2c: qcom-cci: Add MSM8226 compatible
  dt-bindings: i2c: qcom,i2c-cci: Document clocks for MSM8974
  dt-bindings: i2c: qcom,i2c-cci: Document MSM8226 compatible
  i2c: microchip: pci1xxxx: Fix comparison of -EPERM against an unsigned variable

Pull pin control updates from Linus Walleij:
 "There is nothing exciting going on, no core changes, just a few
  drivers and cleanups.

  New drivers:

   - Cypress CY8C95x0 chip pin control support, along with an immediate
     cleanup

   - Mediatek MT8188 SoC pin control support

   - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin
     control support

   - Qualcomm PM7250, PM8450

   - Rockchip RV1126 SoC pin control support

  Improvements:

   - Fix some missing pins in the Armada 37xx driver

   - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP()
     macro

   - Fix some GPIO irq_chips to be immutable

   - Massive Qualcomm device tree binding cleanup, with more to come"

* tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits)
  MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement
  pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100"
  pinctrl: Create subdirectory for StarFive drivers
  dt-bindings: pinctrl: st,stm32: Document interrupt-controller property
  dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property
  dt-bindings: pinctrl: st,stm32: Document gpio-line-names
  pinctrl: st: stop abusing of_get_named_gpio()
  pinctrl: wpcm450: Correct the fwnode_irq_get() return value check
  pinctrl: bcm: Remove unused struct bcm6328_pingroup
  pinctrl: qcom: restrict drivers per ARM/ARM64
  pinctrl: bcm: ns: Remove redundant dev_err call
  gpio: rockchip: request GPIO mux to pinctrl when setting direction
  pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback
  pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops
  pinctrl: cy8c95x0: Drop atomicity on operations on push_pull
  pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux()
  pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper
  pinctrl: stm32: Switch to use dev_err_probe() helper
  dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings
  pinctrl: qcom: spmi-gpio: Add compatible for PM7250B
  ...

Pull input updates from Dmitry Torokhov:

 - a new driver for IBM Operational Panel

 - a new driver for PinePhone keyboards

 - RT5120 PMIC power key support

 - various enhancements and support for new models in xpad (Xbox) driver

 - a new compatible ID for Elan touchscreen driver

 - rework of adp5588-keys driver to support configuring via device
   properties (OF, ACPI, etc) instead of platform data, and proper
   support of optional gpiochip functionality (and removal of
   gpio-adp5588 driver)

 - improvements to firmware update handling in Synaptics RMI4 driver

 - support for double key matrix in mt6779-keypad

 - support for polled mode in adc-joystick driver

 - other assorted driver fixes, cleanups and improvements

* tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (90 commits)
  Input: i8042 - fix refount leak on sparc
  Input: i8042 - add LoongArch support in i8042-acpipnpio.h
  Input: i8042 - rename i8042-x86ia64io.h to i8042-acpipnpio.h
  Input: pinephone-keyboard - support the proxied I2C bus
  Input: pinephone-keyboard - add PinePhone keyboard driver
  dt-bindings: input: Add the PinePhone keyboard binding
  dt-bindings: input: Convert hid-over-i2c to DT schema
  input: drop empty comment blocks
  Input: xpad - add X-Box Adaptive Profile button
  Input: add ABS_PROFILE to uapi and documentation
  Input: xpad - add X-Box Adaptive XBox button
  Input: xpad - add X-Box Adaptive support
  Input: ims-pcu - fix spelling mistake "BOOLTLOADER" -> "BOOTLOADER"
  Input: ibm-panel - add missing MODULE_DEVICE_TABLE
  Input: icn8505 - utilize acpi_get_subsystem_id()
  Input: xpad - decipher xpadone packages with GIP defines
  Input: xpad - refactor using BIT() macro
  Input: synaptics-rmi4 - convert to use sysfs_emit() APIs
  Input: twl4030-pwrbutton - add missing of.h include
  Input: applespi - replace zero-length array with DECLARE_FLEX_ARRAY() helper
  ...

Pull fbdev updates from Helge Deller:
 "Here's a fix for the smscufx USB graphics card to prevent a kernel
  crash if it's plugged in/out too fast.

  The other patches are mostly small cleanups, fixes in failure paths
  and code removal:

   - fix an use-after-free in smscufx USB graphics driver

   - add missing pci_disable_device() in tridentfb failure paths

   - correctly handle irq detection failure in mb862xx driver

   - fix resume code in omapfb/dss

   - drop unused code in controlfb, tridentfb, arkfb, imxfb and udlfb

   - convert uvesafb to use scnprintf() instead of snprintf()

   - convert gbefb to use dev_groups

   - add MODULE_DEVICE_TABLE() entry to vga16fb"

* tag 'fbdev-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: mb862xx: Fix check of return value from irq_of_parse_and_map()
  fbdev: vga16fb: Add missing MODULE_DEVICE_TABLE() entry
  fbdev: tridentfb: Fix missing pci_disable_device() in probe and remove
  fbdev: smscufx: Fix use-after-free in ufx_ops_open()
  fbdev: gbefb: Convert to use dev_groups
  fbdev: imxfb: Remove redundant dev_err() call
  fbdev: omapfb/dss: Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()
  fbdev: uvesafb: Convert snprintf to scnprintf
  fbdev: arkfb: Remove the unused function dac_read_reg()
  fbdev: tridentfb: Remove the unused function shadowmode_off()
  fbdev: controlfb: Remove the unused function VAR_MATCH()
  fbdev: udlfb: Remove redundant initialization to variable identical

Pull dmi updates from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi: Fortify entry point length checks

Pull IPMI updates from Corey Minyard:
 "Fix a bunch of little problems in IPMI

  This is mostly just doc, config, and little tweaks. Nothing big, which
  is why there was nothing for 6.0. There is one crash fix, but it's not
  something that I think anyone is using yet"

* tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi:
  ipmi: Remove unused struct watcher_entry
  ipmi: kcs: aspeed: Update port address comments
  ipmi: Add __init/__exit annotations to module init/exit funcs
  ipmi:ipmb: Don't call ipmi_unregister_smi() on a register failure
  ipmi:ipmb: Fix a vague comment and a typo
  dt-binding: ipmi: add fallback to npcm845 compatible
  ipmi: Fix comment typo
  char: ipmi: modify NPCM KCS configuration
  dt-bindings: ipmi: Add npcm845 compatible

Commit 987f20a9 ("a.out: Remove the a.out implementation") removes
CONFIG_OSF4_COMPAT and its functionality. Hence, sys_osf_{readv,writev}
are now just aliases of sys_{readv,writev}.

Remove these needless aliases.

[ Identical patch also posted by Jason A. Donenfeld ]

Link: https://lore.kernel.org/lkml/CAHk-=wjwvBc3VQMNtUVUrMBVoMPSPu26OuatZ_+1gZ2m-PmmRA@mail.gmail.com/
Link: https://lore.kernel.org/all/20221004135301.1420873-1-Jason@zx2c4.com/Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The merge of the kbuild tree dropped the renaming of the FSL_BOOKE
kconfig option.

Fixes: 8afc66e8 ("Merge tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xfs updates from Dave Chinner:
 "There are relatively few updates this cycle; half the cycle was eaten
  by a grue, the other half was eaten by a tricky data corruption issue
  that I still haven't entirely solved.

  Hence there's no major changes in this cycle and it's largely just
  minor cleanups and small bug fixes:

   - fixes for filesystem shutdown procedure during a DAX memory failure
     notification

   - bug fixes

   - logic cleanups

   - log message cleanups

   - updates to use vfs{g,u}id_t helpers where appropriate"

* tag 'xfs-6.1-for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: on memory failure, only shut down fs after scanning all mappings
  xfs: rearrange the logic and remove the broken comment for xfs_dir2_isxx
  xfs: trim the mapp array accordingly in xfs_da_grow_inode_int
  xfs: do not need to check return value of xlog_kvmalloc()
  xfs: port to vfs{g,u}id_t and associated helpers
  xfs: remove xfs_setattr_time() declaration
  xfs: Remove the unneeded result variable
  xfs: missing space in xfs trace log
  xfs: simplify if-else condition in xfs_reflink_trim_around_shared
  xfs: simplify if-else condition in xfs_validate_new_dalign
  xfs: replace unnecessary seq_printf with seq_puts
  xfs: clean up "%Ld/%Lu" which doesn't meet C standard
  xfs: remove redundant else for clean code
  xfs: remove the redundant word in comment

Pull f2fs updates from Jaegeuk Kim:
 "This round looks fairly small comparing to the previous updates and
  includes mostly minor bug fixes. Nevertheless, as we've still
  interested in improving the stability, Chao added some debugging
  methods to diagnoze subtle runtime inconsistency problem.

  Enhancements:
   - store all the corruption or failure reasons in superblock
   - detect meta inode, summary info, and block address inconsistency
   - increase the limit for reserve_root for low-end devices
   - add the number of compressed IO in iostat

  Bug fixes:
   - DIO write fix for zoned devices
   - do out-of-place writes for cold files
   - fix some stat updates (FS_CP_DATA_IO, dirty page count)
   - fix race condition on setting FI_NO_EXTENT flag
   - fix data races when freezing super
   - fix wrong continue condition check in GC
   - do not allow ATGC for LFS mode

  In addition, there're some code enhancement and clean-ups as usual"

* tag 'f2fs-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (32 commits)
  f2fs: change to use atomic_t type form sbi.atomic_files
  f2fs: account swapfile inodes
  f2fs: allow direct read for zoned device
  f2fs: support recording errors into superblock
  f2fs: support recording stop_checkpoint reason into super_block
  f2fs: remove the unnecessary check in f2fs_xattr_fiemap
  f2fs: introduce cp_status sysfs entry
  f2fs: fix to detect corrupted meta ino
  f2fs: fix to account FS_CP_DATA_IO correctly
  f2fs: code clean and fix a type error
  f2fs: add "c_len" into trace_f2fs_update_extent_tree_range for compressed file
  f2fs: fix to do sanity check on summary info
  f2fs: port to vfs{g,u}id_t and associated helpers
  f2fs: fix to do sanity check on destination blkaddr during recovery
  f2fs: let FI_OPU_WRITE override FADVISE_COLD_BIT
  f2fs: fix race condition on setting FI_NO_EXTENT flag
  f2fs: remove redundant check in f2fs_sanity_check_cluster
  f2fs: add static init_idisk_time function to reduce the code
  f2fs: fix typo
  f2fs: fix wrong dirty page count when race between mmap and fallocate.
  ...

Pull 9p updates from Dominique Martinet:
 "Smaller buffers for small messages and fixes.

  The highlight of this is Christian's patch to allocate smaller buffers
  for most metadata requests: 9p with a big msize would try to allocate
  large buffers when just 4 or 8k would be more than enough; this brings
  in nice performance improvements.

  There's also a few fixes for problems reported by syzkaller (thanks to
  Schspa Shi, Tetsuo Handa for tests and feedback/patches) as well as
  some minor cleanup"

* tag '9p-for-6.1' of https://github.com/martinetd/linux:
  net/9p: clarify trans_fd parse_opt failure handling
  net/9p: add __init/__exit annotations to module init/exit funcs
  net/9p: use a dedicated spinlock for trans_fd
  9p/trans_fd: always use O_NONBLOCK read/write
  net/9p: allocate appropriate reduced message buffers
  net/9p: add 'pooled_rbuffers' flag to struct p9_trans_module
  net/9p: add p9_msg_buf_size()
  9p: add P9_ERRMAX for 9p2000 and 9p2000.u
  net/9p: split message size argument into 't_size' and 'r_size' pair
  9p: trans_fd/p9_conn_cancel: drop client lock earlier

Pull gfs2 debugfs updates from Andreas Gruenbacher:

 - Improve the way how the state of glocks is reported in debugfs for
   glocks which are not held by processes, but rather by other resouces
   like cached inodes or flocks.

* tag 'gfs2-nopid-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Mark the remaining process-independent glock holders as GL_NOPID
  gfs2: Mark flock glock holders as GL_NOPID
  gfs2: Add GL_NOPID flag for process-independent glock holders
  gfs2: Add flocks to glockfd debugfs file
  gfs2: Add glockfd debugfs file

Pull gfs2 updates from Andreas Gruenbacher:

 - Make sure to initialize the filesystem work queues before registering
   the filesystem; this prevents them from being used uninitialized.

 - On filesystem withdraw: prevent a a double iput() and immediately
   reject pending locking requests that can no longer succeed.

 - Use TRY lock in gfs2_inode_lookup() to prevent a rare glock hang
   during evict.

 - During filesystem mount, explicitly make sure that the sb_bsize and
   sb_bsize_shift super block fields are consistent with each other.
   This prevents messy error messages during fuzz testing.

 - Switch from strlcpy to strscpy.

* tag 'gfs2-v6.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Register fs after creating workqueues
  gfs2: Check sb_bsize_shift after reading superblock
  gfs2: Switch from strlcpy to strscpy
  gfs2: Clear flags when withdraw prevents xmote
  gfs2: Dequeue waiters when withdrawn
  gfs2: Prevent double iput for journal on error
  gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED inodes

Pull cifs updates from Steve French:

 - data corruption fix when cache disabled

 - four RDMA (smbdirect) improvements, including enabling support for
   SoftiWARP

 - four signing improvements

 - three directory lease improvements

 - four cleanup fixes

 - minor security fix

 - two debugging improvements

* tag '6.1-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
  smb3: fix oops in calculating shash_setkey
  cifs: secmech: use shash_desc directly, remove sdesc
  smb3: rename encryption/decryption TFMs
  cifs: replace kfree() with kfree_sensitive() for sensitive data
  cifs: remove initialization value
  cifs: Replace a couple of one-element arrays with flexible-array members
  smb3: do not log confusing message when server returns no network interfaces
  smb3: define missing create contexts
  cifs: store a pointer to a fid in the cfid structure instead of the struct
  cifs: improve handlecaching
  cifs: Make tcon contain a wrapper structure cached_fids instead of cached_fid
  smb3: add dynamic trace points for tree disconnect
  Fix formatting of client smbdirect RDMA logging
  Handle variable number of SGEs in client smbdirect send.
  Reduce client smbdirect max receive segment size
  Decrease the number of SMB3 smbdirect client SGEs
  cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message
  cifs: destage dirty pages before re-reading them for cache=none
  cifs: return correct error in ->calc_signature()
  MAINTAINERS: Add Tom Talpey as cifs.ko reviewer
  ...

Pull more nfsd updates from Chuck Lever:

 - filecache code clean-ups

* tag 'nfsd-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: rework hashtable handling in nfsd_do_file_acquire
  nfsd: fix nfsd_file_unhash_and_dispose

Pull vfs tmpfile updates from Al Viro:
 "Miklos' ->tmpfile() signature change; pass an unopened struct file to
  it, let it open the damn thing. Allows to add tmpfile support to FUSE"

* tag 'pull-tmpfile' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fuse: implement ->tmpfile()
  vfs: open inside ->tmpfile()
  vfs: move open right after ->tmpfile()
  vfs: make vfs_tmpfile() static
  ovl: use vfs_tmpfile_open() helper
  cachefiles: use vfs_tmpfile_open() helper
  cachefiles: only pass inode to *mark_inode_inuse() helpers
  cachefiles: tmpfile error handling cleanup
  hugetlbfs: cleanup mknod and tmpfile
  vfs: add vfs_tmpfile_open() helper

Pull MM updates from Andrew Morton:

 - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
   linux-next for a couple of months without, to my knowledge, any
   negative reports (or any positive ones, come to that).

 - Also the Maple Tree from Liam Howlett. An overlapping range-based
   tree for vmas. It it apparently slightly more efficient in its own
   right, but is mainly targeted at enabling work to reduce mmap_lock
   contention.

   Liam has identified a number of other tree users in the kernel which
   could be beneficially onverted to mapletrees.

   Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
   at [1]. This has yet to be addressed due to Liam's unfortunately
   timed vacation. He is now back and we'll get this fixed up.

 - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
   clang-generated instrumentation to detect used-unintialized bugs down
   to the single bit level.

   KMSAN keeps finding bugs. New ones, as well as the legacy ones.

 - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
   memory into THPs.

 - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
   support file/shmem-backed pages.

 - userfaultfd updates from Axel Rasmussen

 - zsmalloc cleanups from Alexey Romanov

 - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
   memory-failure

 - Huang Ying adds enhancements to NUMA balancing memory tiering mode's
   page promotion, with a new way of detecting hot pages.

 - memcg updates from Shakeel Butt: charging optimizations and reduced
   memory consumption.

 - memcg cleanups from Kairui Song.

 - memcg fixes and cleanups from Johannes Weiner.

 - Vishal Moola provides more folio conversions

 - Zhang Yi removed ll_rw_block() :(

 - migration enhancements from Peter Xu

 - migration error-path bugfixes from Huang Ying

 - Aneesh Kumar added ability for a device driver to alter the memory
   tiering promotion paths. For optimizations by PMEM drivers, DRM
   drivers, etc.

 - vma merging improvements from Jakub Matěn.

 - NUMA hinting cleanups from David Hildenbrand.

 - xu xin added aditional userspace visibility into KSM merging
   activity.

 - THP & KSM code consolidation from Qi Zheng.

 - more folio work from Matthew Wilcox.

 - KASAN updates from Andrey Konovalov.

 - DAMON cleanups from Kaixu Xia.

 - DAMON work from SeongJae Park: fixes, cleanups.

 - hugetlb sysfs cleanups from Muchun Song.

 - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.

Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]

* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
  hugetlb: allocate vma lock for all sharable vmas
  hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
  hugetlb: fix vma lock handling during split vma and range unmapping
  mglru: mm/vmscan.c: fix imprecise comments
  mm/mglru: don't sync disk for each aging cycle
  mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
  mm: memcontrol: use do_memsw_account() in a few more places
  mm: memcontrol: deprecate swapaccounting=0 mode
  mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
  mm/secretmem: remove reduntant return value
  mm/hugetlb: add available_huge_pages() func
  mm: remove unused inline functions from include/linux/mm_inline.h
  selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
  selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
  selftests/vm: add thp collapse shmem testing
  selftests/vm: add thp collapse file and tmpfs testing
  selftests/vm: modularize thp collapse memory operations
  selftests/vm: dedup THP helpers
  mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
  mm/madvise: add file and shmem support to MADV_COLLAPSE
  ...

Pull x86 mm updates from Dave Hansen:
 "There are some small things here, plus one big one.

  The big one detected and refused to create W+X kernel mappings. This
  caused a bit of trouble and it is entirely disabled on 32-bit due to
  known unfixable EFI issues. It also oopsed on some systemd eBPF use,
  which kept some users from booting.

  The eBPF issue is fixed, but those troubles were caught relatively
  recently which made me nervous that there are more lurking. The final
  commit in here retains the warnings, but doesn't actually refuse to
  create W+X mappings.

  Summary:

   - Detect insecure W+X mappings and warn about them, including a few
     bug fixes and relaxing the enforcement

   - Do a long-overdue defconfig update and enabling W+X boot-time
     detection

   - Cleanup _PAGE_PSE handling (follow-up on an earlier bug)

   - Rename a change_page_attr function"

* tag 'x86_mm_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Ease W^X enforcement back to just a warning
  x86/mm: Disable W^X detection and enforcement on 32-bit
  x86/mm: Add prot_sethuge() helper to abstract out _PAGE_PSE handling
  x86/mm/32: Fix W^X detection when page tables do not support NX
  x86/defconfig: Enable CONFIG_DEBUG_WX=y
  x86/defconfig: Refresh the defconfigs
  x86/mm: Refuse W^X violations
  x86/mm: Rename set_memory_present() to set_memory_p()

Pull xtensa updates from Max Filippov:

 - add support for FDPIC and static PIE executable formats for noMMU

* tag 'xtensa-20221010' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add FDPIC and static PIE support for noMMU
  xtensa: clean up ELF_PLAT_INIT macro

Pull m68knommu updates from Greg Ungerer:
 "Just a couple of changes. Fixes to compilation of the old/legacy
  Freescale 68328 targets in some kernel configurations, and some
  default configuration updates.

  Summary:

   - fix build problems for legacy 68328 targets

   - clean out configs of removed options"

* tag 'm68knommu-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: update config files
  m68knommu: fix non-mmu classic 68000 legacy timer tick selection
  m68knommu: fix non-specific 68328 choice interrupt build failure

Pull virtio updates from Michael Tsirkin:

 - 9k mtu perf improvements

 - vdpa feature provisioning

 - virtio blk SECURE ERASE support

 - fixes and cleanups all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_pci: don't try to use intxif pin is zero
  vDPA: conditionally read MTU and MAC in dev cfg space
  vDPA: fix spars cast warning in vdpa_dev_net_mq_config_fill
  vDPA: check virtio device features to detect MQ
  vDPA: check VIRTIO_NET_F_RSS for max_virtqueue_paris's presence
  vDPA: only report driver features if FEATURES_OK is set
  vDPA: allow userspace to query features of a vDPA device
  virtio_blk: add SECURE ERASE command support
  vp_vdpa: support feature provisioning
  vdpa_sim_net: support feature provisioning
  vdpa: device feature provisioning
  virtio-net: use mtu size as buffer length for big packets
  virtio-net: introduce and use helper function for guest gso support checks
  virtio: drop vp_legacy_set_queue_size
  virtio_ring: make vring_alloc_queue_packed prettier
  virtio_ring: split: Operators use unified style
  vhost: add __init/__exit annotations to module init/exit funcs

Merge tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:

 - Remove unnecessary delay while probing for VMBus (Stanislav
   Kinsburskiy)

 - Optimize vmbus_on_event (Saurabh Sengar)

 - Fix a race in Hyper-V DRM driver (Saurabh Sengar)

 - Miscellaneous clean-up patches from various people

* tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Replace kmap() with kmap_local_page()
  drm/hyperv: Add ratelimit on error message
  hyperv: simplify and rename generate_guest_id
  Drivers: hv: vmbus: Split memcpy of flex-array
  scsi: storvsc: remove an extraneous "to" in a comment
  Drivers: hv: vmbus: Don't wait for the ACPI device upon initialization
  Drivers: hv: vmbus: Use PCI_VENDOR_ID_MICROSOFT for better discoverability
  Drivers: hv: vmbus: Fix kernel-doc
  drm/hyperv: Don't overwrite dirt_needed value set by host
  Drivers: hv: vmbus: Optimize vmbus_on_event

Pull more thermal control updates from Rafael Wysocki:
 "These fix assorted issues in the thermal core and ARM thermal drivers.

  Specifics:

   - Use platform data to get the sensor ID instead of parsing the
     device in imx_sc thermal driver and remove the dedicated OF
     function from the core code (Daniel Lezcano).

   - Fix Kconfig dependency for the QCom tsens thermal driver (Jonathan
     Cameron).

   - Add missing const annotation to the RCar ops thermal driver (Lad
     Prabhakar).

   - Drop duplicate parameter check from
     thermal_zone_device_register_with_trips() (Lad Prabhakar).

   - Fix NULL pointer dereference in trip_point_temp_store() by making
     it check if the ->set_trip_temp() operation is present (Lad
     Prabhakar).

   - Fix the MSM8939 fourth sensor hardware ID in the QCom tsens thermal
     driver (Vincent Knecht)"

* tag 'thermal-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id
  thermal/core: Add a check before calling set_trip_temp()
  thermal/core: Drop valid pointer check for type
  thermal/drivers/rcar_thermal: Constify static thermal_zone_device_ops
  thermal/drivers/qcom: Drop false build dependency of all QCOM drivers on QCOM_TSENS
  thermal/of: Remove the thermal_zone_of_get_sensor_id() function
  thermal/drivers/imx_sc: Rely on the platform data to get the resource id

Pull more power management updates from Rafael Wysocki:
 "These update the turbostat utility, extend the macros used for
  defining device power management callbacks and add a diagnostic
  message to the generic power domains code.

  Specifics:

   - Add an error message to be printed when a power domain marked as
     "always on" is not actually on during initialization (Johan
     Hovold).

   - Extend macros used for defining power management callbacks to allow
     conditional exporting of noirq and late/early suspend/resume PM
     callbacks (Paul Cercueil).

   - Update the turbostat utility:
      - Add support for two new platforms (Zhang Rui).
      - Adjust energy unit for Sapphire Rapids (Zhang Rui).
      - Do not dump TRL if turbo is not supported (Artem Bityutskiy)"

* tag 'pm-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tools/power turbostat: version 2022.10.04
  tools/power turbostat: Use standard Energy Unit for SPR Dram RAPL domain
  tools/power turbostat: Do not dump TRL if turbo is not supported
  tools/power turbostat: Add support for MeteorLake platforms
  tools/power turbostat: Add support for RPL-S
  PM: Improve EXPORT_*_DEV_PM_OPS macros
  PM: domains: log failures to register always-on domains

Pull more ACPI updates from Rafael Wysocki:
 "These fix two issues, in APEI and in the int3472 driver, clean up the
  ACPI thermal driver, add ACPI support for non-GPE system wakeup events
  and make the system reboot code use the S5 (system off) state by
  default.

  Specifics:

   - Fix ACPI device object reference counting in (recently updated)
     skl_int3472_fill_clk_pdata() (Andy Shevchenko).

   - Fix a memory leak in APEI by avoiding to add a task_work to kernel
     threads running when an asynchronous error is detected (Shuai Xue).

   - Add ACPI support for handling system wakeups via GPIO wake capable
     IRQs in addition to GPEs (Raul E Rangel).

   - Make the system reboot code put ACPI-enabled systems into the S5
     (system off) state which is necessary for some platforms to work as
     expected (Kai-Heng Feng).

   - Make the white space usage in the ACPI thermal driver more
     consistent and drop redundant code from it (Rafael Wysocki)"

* tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: thermal: Drop some redundant code
  ACPI: thermal: Drop redundant parens from expressions
  ACPI: thermal: Use white space more consistently
  platform/x86: int3472: Don't leak reference on error
  ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
  PM: ACPI: reboot: Reinstate S5 for reboot
  kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
  ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
  i2c: acpi: Use ACPI wake capability bit to set wake_irq
  ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
  gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get

Pull dma-mapping updates from Christoph Hellwig:

 - fix a regression in the ARM dma-direct conversion (Christoph Hellwig)

 - use memcpy_{from,to}_page (Fabio M. De Francesco)

 - cleanup the swiotlb MAINTAINERS entry (Lukas Bulwahn)

 - make SG table pool allocation less fragile (Masahiro Yamada)

 - don't panic on swiotlb initialization failure (Robin Murphy)

* tag 'dma-mapping-6.1-2022-10-10' of git://git.infradead.org/users/hch/dma-mapping:
  ARM/dma-mapping: remove the dma_coherent member of struct dev_archdata
  ARM/dma-mappіng: don't override ->dma_coherent when set from a bus notifier
  lib/sg_pool: change module_init(sg_pool_init) to subsys_initcall
  MAINTAINERS: merge SWIOTLB SUBSYSTEM into DMA MAPPING HELPERS
  swiotlb: don't panic!
  swiotlb: replace kmap_atomic() with memcpy_{from,to}_page()

Pull iommu updates from Joerg Roedel:

 - remove the bus_set_iommu() interface which became unnecesary because
   of IOMMU per-device probing

 - make the dma-iommu.h header private

 - Intel VT-d changes from Lu Baolu:
	  - Decouple PASID and PRI from SVA
	  - Add ESRTPS & ESIRTPS capability check
	  - Cleanups

 - Apple DART support for the M1 Pro/MAX SOCs

 - support for AMD IOMMUv2 page-tables for the DMA-API layer.

   The v2 page-tables are compatible with the x86 CPU page-tables. Using
   them for DMA-API prepares support for hardware-assisted IOMMU
   virtualization

 - support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver

 - some smaller fixes and cleanups

* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
  iommu/vt-d: Avoid unnecessary global DMA cache invalidation
  iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
  iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
  iommu/vt-d: Remove pasid_set_eafe()
  iommu/vt-d: Decouple PASID & PRI enabling from SVA
  iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
  dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
  iommu: dart: Support t6000 variant
  iommu/io-pgtable-dart: Add DART PTE support for t6000
  iommu/io-pgtable: Add DART subpage protection support
  iommu/io-pgtable: Move Apple DART support to its own file
  iommu/mediatek: Add support for MT6795 Helio X10 M4Us
  iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
  dt-bindings: mediatek: Add bindings for MT6795 M4U
  iommu/iova: Fix module config properly
  iommu/amd: Fix sparse warning
  iommu/amd: Remove outdated comment
  iommu/amd: Free domain ID after domain_flush_pages
  iommu/amd: Free domain id in error path
  iommu/virtio: Fix compile error with viommu_capable()
  ...

Pull devicetree updates from Rob Herring:
 "DT core:

   - Fix node refcounting in of_find_last_cache_level()

   - Constify device_node in of_device_compatible_match()

   - Fix 'dma-ranges' handling in bus controller nodes

   - Fix handling of initrd start > end

   - Improve error reporting in of_irq_init()

   - Taint kernel on DT unittest running

   - Use strscpy instead of strlcpy

   - Add a build target, dt_compatible_check, to check for compatible
     strings used in kernel sources against compatible strings in DT
     schemas.

   - Handle DT_SCHEMA_FILES changes when rebuilding

  DT bindings:

   - LED bindings for MT6370 PMIC

   - Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
     mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
     and arm,versatile-sysreg to DT schema format

   - Add nvmem cells to u-boot,env schema

   - Add more LED_COLOR_ID definitions

   - Require 'opp-table' uses to be a node

   - Various schema fixes to match QEMU 'virt' DT usage

   - Tree wide dropping of redundant 'Device Tree Binding' in schema
     titles

   - More (unevaluated|additional)Properties fixes in schema child nodes

   - Drop various redundant minItems equal to maxItems"

* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
  of: base: Shift refcount decrement in of_find_last_cache_level()
  dt-bindings: leds: Add MediaTek MT6370 flashlight
  dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
  dt-bindings: mailbox: Convert mtk-gce to DT schema
  of: base: make of_device_compatible_match() accept const device node
  of: Fix "dma-ranges" handling for bus controllers
  of: fdt: Remove unused struct fdt_scan_status
  dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
  dt-bindings: timer: Add power-domains for TI timer-dm on K3
  dt: Add a check for undocumented compatible strings in kernel
  kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
  dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
  dt-bindings: i2c: migrate mt7621 text bindings to YAML
  dt-bindings: power: gpcv2: correct patternProperties
  dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
  dt-bindings: timer: arm,arch_timer: Allow dual compatible string
  dt-bindings: arm: cpus: Add kryo240 compatible
  dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
  dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
  dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
  ...

Pull tpm updates from Jarkko Sakkinen:
 "Just a few bug fixes this time"

* tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle
  security/keys: Remove inconsistent __user annotation
  char: move from strlcpy with unused retval to strscpy

Pull crypto updates from Herbert Xu:
 "API:
   - Feed untrusted RNGs into /dev/random
   - Allow HWRNG sleeping to be more interruptible
   - Create lib/utils module
   - Setting private keys no longer required for akcipher
   - Remove tcrypt mode=1000
   - Reorganised Kconfig entries

  Algorithms:
   - Load x86/sha512 based on CPU features
   - Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher

  Drivers:
   - Add HACE crypto driver aspeed"

* tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
  crypto: aspeed - Remove redundant dev_err call
  crypto: scatterwalk - Remove unused inline function scatterwalk_aligned()
  crypto: aead - Remove unused inline functions from aead
  crypto: bcm - Simplify obtain the name for cipher
  crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf()
  hwrng: core - start hwrng kthread also for untrusted sources
  crypto: zip - remove the unneeded result variable
  crypto: qat - add limit to linked list parsing
  crypto: octeontx2 - Remove the unneeded result variable
  crypto: ccp - Remove the unneeded result variable
  crypto: aspeed - Fix check for platform_get_irq() errors
  crypto: virtio - fix memory-leak
  crypto: cavium - prevent integer overflow loading firmware
  crypto: marvell/octeontx - prevent integer overflows
  crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled
  crypto: hisilicon/qm - fix the qos value initialization
  crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs
  crypto: tcrypt - add async speed test for aria cipher
  crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
  crypto: aria - prepare generic module for optimized implementations
  ...

Pull bitmap updates from Yury Norov:

 - Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld)

 - cleanup nr_cpu_ids vs nr_cpumask_bits mess (me)

   This series cleans that mess and adds new config FORCE_NR_CPUS that
   allows to optimize cpumask subsystem if the number of CPUs is known
   at compile-time.

 - optimize find_bit() functions (me)

   Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT()
   macros.

 - add find_nth_bit() (me)

   Adds find_nth_bit(), which is ~70 times faster than bitcounting with
   for_each() loop:

	for_each_set_bit(bit, mask, size)
		if (n-- == 0)
			return bit;

   Also adds bitmap_weight_and() to let people replace this pattern:

	tmp = bitmap_alloc(nbits);
	bitmap_and(tmp, map1, map2, nbits);
	weight = bitmap_weight(tmp, nbits);
	bitmap_free(tmp);

   with a single bitmap_weight_and() call.

 - repair cpumask_check() (me)

   After switching cpumask to use nr_cpu_ids, cpumask_check() started
   generating many false-positive warnings. This series fixes it.

 - Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin
   Schneider)

   Extends the API with one more function and applies it in sched/core.

* tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits)
  sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()
  lib/test_cpumask: Add for_each_cpu_and(not) tests
  cpumask: Introduce for_each_cpu_andnot()
  lib/find_bit: Introduce find_next_andnot_bit()
  cpumask: fix checking valid cpu range
  lib/bitmap: add tests for for_each() loops
  lib/find: optimize for_each() macros
  lib/bitmap: introduce for_each_set_bit_wrap() macro
  lib/find_bit: add find_next{,_and}_bit_wrap
  cpumask: switch for_each_cpu{,_not} to use for_each_bit()
  net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}
  cpumask: add cpumask_nth_{,and,andnot}
  lib/bitmap: remove bitmap_ord_to_pos
  lib/bitmap: add tests for find_nth_bit()
  lib: add find_nth{,_and,_andnot}_bit()
  lib/bitmap: add bitmap_weight_and()
  lib/bitmap: don't call __bitmap_weight() in kernel code
  tools: sync find_bit() implementation
  lib/find_bit: optimize find_next_bit() functions
  lib/find_bit: create find_first_zero_bit_le()
  ...

Pull tracing updates from Steven Rostedt:
 "Major changes:

   - Changed location of tracing repo from personal git repo to:
     git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace.git

   - Added Masami Hiramatsu as co-maintainer

   - Updated MAINTAINERS file to separate out FTRACE as it is more than
     just TRACING.

  Minor changes:

   - Added Mark Rutland as FTRACE reviewer

   - Updated user_events to make it on its way to remove the BROKEN tag.
     The changes should now be acceptable but will run it through a
     cycle and hopefully we can remove the BROKEN tag next release.

   - Added filtering to eprobes

   - Added a delta time to the benchmark trace event

   - Have the histogram and filter callbacks called via a switch
     statement instead of indirect functions. This speeds it up to avoid
     retpolines.

   - Add a way to wake up ring buffer waiters waiting for the ring
     buffer to fill up to its watermark.

   - New ioctl() on the trace_pipe_raw file to wake up ring buffer
     waiters.

   - Wake up waiters when the ring buffer is disabled. A reader may
     block when the ring buffer is disabled, but if it was blocked when
     the ring buffer is disabled it should then wake up.

  Fixes:

   - Allow splice to read partially read ring buffer pages. This fixes
     splice never moving forward.

   - Fix inverted compare that made the "shortest" ring buffer wait
     queue actually the longest.

   - Fix a race in the ring buffer between resetting a page when a
     writer goes to another page, and the reader.

   - Fix ftrace accounting bug when function hooks are added at boot up
     before the weak functions are set to "disabled".

   - Fix bug that freed a user allocated snapshot buffer when enabling a
     tracer.

   - Fix possible recursive locks in osnoise tracer

   - Fix recursive locking direct functions

   - Other minor clean ups and fixes"

* tag 'trace-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (44 commits)
  ftrace: Create separate entry in MAINTAINERS for function hooks
  tracing: Update MAINTAINERS to reflect new tracing git repo
  tracing: Do not free snapshot if tracer is on cmdline
  ftrace: Still disable enabled records marked as disabled
  tracing/user_events: Move pages/locks into groups to prepare for namespaces
  tracing: Add Masami Hiramatsu as co-maintainer
  tracing: Remove unused variable 'dups'
  MAINTAINERS: add myself as a tracing reviewer
  ring-buffer: Fix race between reset page and reading page
  tracing/user_events: Update ABI documentation to align to bits vs bytes
  tracing/user_events: Use bits vs bytes for enabled status page data
  tracing/user_events: Use refcount instead of atomic for ref tracking
  tracing/user_events: Ensure user provided strings are safely formatted
  tracing/user_events: Use WRITE instead of READ for io vector import
  tracing/user_events: Use NULL for strstr checks
  tracing: Fix spelling mistake "preapre" -> "prepare"
  tracing: Wake up waiters when tracing is disabled
  tracing: Add ioctl() to force ring buffer waiters to wake up
  tracing: Wake up ring buffer waiters on closing of the file
  ring-buffer: Add ring_buffer_wake_waiters()
  ...

Pull sysctl updates from Luis Chamberlain:
 "Just some boring cleanups on the sysctl front for this release"

* tag 'sysctl-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  kernel/sysctl-test: use SYSCTL_{ZERO/ONE_HUNDRED} instead of i_{zero/one_hundred}
  kernel/sysctl.c: move sysctl_vals and sysctl_long_vals to sysctl.c
  sysctl: remove max_extfrag_threshold
  kernel/sysctl.c: remove unnecessary (void*) conversions
  proc: remove initialization assignment

This ensures that no module record/or entry is added to the
unloaded_tainted_modules list if it does not carry a taint.
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Fixes: 99bd9956 ("module: Introduce module unload taint tracking")
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull module updates from Luis Chamberlain:

 - minor enhancement for sysfs compression string (David Disseldorp)

 - debugfs interface to view unloaded tainted modules (Aaron Tomlin)

* tag 'modules-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module/decompress: generate sysfs string at compile time
  module: Add debugfs interface to view unloaded tainted modules

Pull Kbuild updates from Masahiro Yamada:

 - Remove potentially incomplete targets when Kbuid is interrupted by
   SIGINT etc in case GNU Make may miss to do that when stderr is piped
   to another program.

 - Rewrite the single target build so it works more correctly.

 - Fix rpm-pkg builds with V=1.

 - List top-level subdirectories in ./Kbuild.

 - Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
   kallsyms.

 - Avoid two different modules in lib/zstd/ having shared code, which
   potentially causes building the common code as build-in and modular
   back-and-forth.

 - Unify two modpost invocations to optimize the build process.

 - Remove head-y syntax in favor of linker scripts for placing
   particular sections in the head of vmlinux.

 - Bump the minimal GNU Make version to 3.82.

 - Clean up misc Makefiles and scripts.

* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
  docs: bump minimal GNU Make version to 3.82
  ia64: simplify esi object addition in Makefile
  Revert "kbuild: Check if linker supports the -X option"
  kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
  kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
  zstd: Fixing mixed module-builtin objects
  kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
  kallsyms: take the input file instead of reading stdin
  kallsyms: drop duplicated ignore patterns from kallsyms.c
  kbuild: reuse mksysmap output for kallsyms
  mksysmap: update comment about __crc_*
  kbuild: remove head-y syntax
  kbuild: use obj-y instead extra-y for objects placed at the head
  kbuild: hide error checker logs for V=1 builds
  kbuild: re-run modpost when it is updated
  kbuild: unify two modpost invocations
  kbuild: move vmlinux.o rule to the top Makefile
  kbuild: move .vmlinux.objs rule to Makefile.modpost
  kbuild: list sub-directories in ./Kbuild
  Makefile.compiler: replace cc-ifversion with compiler-specific macros
  ...

Merge tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching updates from Petr Mladek:

 - Fix race between fork and livepatch transition revert

 - Add sysfs entry that shows "patched" state for each object (module)
   that can be livepatched by the given livepatch

 - Some clean up

* tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  selftests/livepatch: add sysfs test
  livepatch: add sysfs entry "patched" for each klp_object
  selftests/livepatch: normalize sysctl error message
  livepatch: Add a missing newline character in klp_module_coming()
  livepatch: fix race between fork and KLP transition