async crypto handler will report the socket error no need
to report it again. We can, however, let the data we already
copied be reported to user space but we need to make sure
the error will be reported next time around.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

process_rx_list() only fails if it can't copy data to user
space. There is no point recording the error onto sk->sk_err
or giving up on the data which was read partially. Treat
the return value like a normal socket partial read.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If crypto didn't always invoke our callback for async
we'd not be clearing skb->sk and would crash in the
skb core when freeing it. This if must be dead code.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Async crypto never worked with TLS 1.3 and was explicitly disabled in
commit 8497ded2 ("net/tls: Disable async decrytion for tls1.3").
There's no need for us to handle TLS 1.3 padding in the async cb.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move counting TlsDecryptErrors to tls_do_decryption()
where differences between sync and async crypto are
reconciled.

No functional changes, this code just always gave
me a pause.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code is identical, we can save a few LoC.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

rx_list is protected by the socket lock, no need to take
the built-in spin lock on accesses.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform_get_irq() return negative value on failure, so null check of
return value is incorrect. Fix it by comparing whether it is less than
zero.

Fixes: 9055a2f5 ("ixp4xx_eth: make ptp support a platform driver")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220412085126.2532924-1-lv.ruyi@zte.com.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20220412082847.2532584-1-chi.minghao@zte.com.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

XRFM is no longer needed for configuring FOU tunnels
(CONFIG_NET_FOU_IP_TUNNELS), remove from Kconfig.

Also remove the xrfm.h dependency in fou.c. It was
added in '23461551 ("fou: Support for foo-over-udp RX path")'
for depencies of udp_del_offload and udp_offloads, which were removed in
'd92283e3 ("fou: change to use UDP socket GRO")'.

Built and installed kernel and setup GUE/FOU tunnels.
Signed-off-by: Coco Li <lixiaoyan@google.com>
Link: https://lore.kernel.org/r/20220411213717.3688789-1-lixiaoyan@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
mlxsw: Extend device registers for line cards support

This patch set prepares mlxsw for line cards support by extending device
registers with a slot index, which allows accessing components found on
a line card at a given slot. Currently, only slot index 0 (main board)
is used.

No user visible changes that I am aware of.
====================

Link: https://lore.kernel.org/r/20220411144657.2655752-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add new field 'max_modules_per_slot' to provide maximum number of
modules that can be connected per slot. This field will always be zero,
if 'slot_index' in query request is set to non-zero value, otherwise
value in this field will provide maximum modules number, which can be
equipped on device inserted at any slot.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pass the slot index down to PMAOS pack helper alongside with the module.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extend MGPIR (Management General Peripheral Information Register) with
new fields specifying the slot number and number of the slots available
on system. The purpose of these fields is:
- to support access to MPGIR register on modular system for getting the
  number of cages, equipped on the line card, inserted at specified
  slot. In case slot number is set zero, MGPIR will provide the
  information for the main board. For Top of the Rack (non-modular)
  system it will provide the same as before.
- to provide the number of slots supported by system. This data is
  relevant only in case slot number is set zero.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extend PMMP (Port Module Memory Map Properties Register) with new
field specifying the slot number. The purpose of this field is to
enable overriding the cable/module memory map advertisement.

For non-modular systems the 'module' number uniquely identifies the
transceiver location. For modular systems the transceivers are
identified by two indexes:
- 'slot_index', specifying the slot number, where line card is located;
- 'module', specifying cage transceiver within the line card.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extend MCION (Management Cable IO and Notifications Register) with new
field specifying the slot number. The purpose of this field is to
support access to MCION register for query cage transceiver on modular
system.

For non-modular systems the 'module' number uniquely identifies the
transceiver location. For modular systems the transceivers are
identified by two indexes:
- 'slot_index', specifying the slot number, where line card is located;
- 'module', specifying cage transceiver within the line card.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extend MCIA (Management Cable Info Access Register) with new field
specifying the slot number. The purpose of this field is to support
access to MCIA register for reading cage cable information on modular
system. For non-modular systems the 'module' number uniquely identifies
the transceiver location. For modular systems the transceivers are
identified by two indexes:
- 'slot_index', specifying the slot number, where line card is located;
- 'module', specifying cage transceiver within the line card.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extend MTBR (Management Temperature Bulk Register) with new field
specifying the slot number. The purpose of this field is to support
access to MTBR register for reading temperature sensors on modular
system. For non-modular systems the 'sensor_index' uniquely identifies
the cage sensors. For modular systems the sensors are identified by two
indexes:
- 'slot_index', specifying the slot number, where line card is located;
- 'sensor_index', specifying cage sensor within the line card.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extend MTMP (Management Temperature Register) with new field specifying
the slot index. The purpose of this field is to support access to MTMP
register for reading temperature sensors on modular systems.
For non-modular systems the 'sensor_index' uniquely identifies the cage
sensors, while 'slot_index' is always 0. For modular systems the
sensors are identified by:
- 'slot_index', specifying the slot index, where line card is located;
- 'sensor_index', specifying cage sensor within the line card.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing recycle stats to page_pool_put_page_bulk routine.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/3712178b51c007cfaed910ea80e68f00c916b1fa.1649685634.git.lorenzo@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The internal recvmsg() functions have two parameters 'flags' and 'noblock'
that were merged inside skb_recv_datagram(). As a follow up patch to commit
f4b41f06 ("net: remove noblock parameter from skb_recv_datagram()")
this patch removes the separate 'noblock' parameter for recvmsg().

Analogue to the referenced patch for skb_recv_datagram() the 'flags' and
'noblock' parameters are unnecessarily split up with e.g.

err = sk->sk_prot->recvmsg(sk, msg, size, flags & MSG_DONTWAIT,
                           flags & ~MSG_DONTWAIT, &addr_len);

or in

err = INDIRECT_CALL_2(sk->sk_prot->recvmsg, tcp_recvmsg, udp_recvmsg,
                      sk, msg, size, flags & MSG_DONTWAIT,
                      flags & ~MSG_DONTWAIT, &addr_len);

instead of simply using only flags all the time and check for MSG_DONTWAIT
where needed (to preserve for the formerly separated no(n)block condition).
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20220411124955.154876-1-socketcan@hartkopp.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add the following Telit FN980 composition:

0x1057: tty, adb, rmnet, tty, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220411135943.4067264-1-dnlplm@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Martin Habets says:

====================
sfc: Remove some global definitions

These are some small cleanups to remove definitions that need not
be defined in .h files.
====================

Link: https://lore.kernel.org/r/164967635861.17602.16525009567130361754.stgit@palantir17.mph.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The strings are only used in efx_common.c so the definitions
can be static in there.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

It is defined both in efx.h and tx_common.h.
Remove the definition in efx.h.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This means we can remove them from efx_channel.h and avoid
naming conflicts later.
efx_channel_dummy_op_void() cannot be static as it is
used in ef100_nic.c.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Russell King says:

====================
net: dsa: mt7530: updates for phylink changes

This revised series is a partial conversion of the mt7530 DSA driver to
the modern phylink infrastructure. This driver has some exceptional
cases which prevent - at the moment - its full conversion (particularly
with the Autoneg bit) to using phylink_generic_validate().

Patch 1 fixes the incorrect test highlighted in the first RFC series.

Patch 2 fixes the incorrect assumption that RGMII is unable to support
1000BASE-X.

Patch 3 populates the supported_interfaces for each port

Patch 4 removes the interface checks that become unnecessary as a result
of patch 3.

Patch 5 removes use of phylink_helper_basex_speed() which is no longer
required by phylink.

Patch 6 becomes possible after patch 5, only indicating the ethtool
modes that can be supported with a particular interface mode - this
involves removing some modes and adding others as per phylink
documentation.

Patch 7 switches the driver to use phylink_get_linkmodes(), which moves
the driver as close as we can to phylink_generic_validate() due to the
Autoneg bit issue mentioned above.

Patch 8 converts the driver to the phylink pcs support, removing a bunch
of driver private indirected methods. We include TRGMII as a PCS even
though strictly TRGMII does not have a PCS. This is convenient to allow
the change in patch 9 to be made.

Patch 9 moves the special autoneg handling to the PCS validate method,
which means we can convert the MAC side to the generic validator.

Patch 10 marks the driver as non-legacy.

The series was posted on 23 February, and a ping sent on 3 March, but
no feedback has been received. The previous posting also received no
feedback on the actual patches either.

v2:
- fix build issue in patch 5
- add Marek's tested-by

 drivers/net/dsa/mt7530.c | 330 +++++++++++++++++++++--------------------------
 drivers/net/dsa/mt7530.h |  26 ++--
 2 files changed, 159 insertions(+), 197 deletions(-)
====================

Link: https://lore.kernel.org/r/YlP4vGKVrlIJUUHK@shell.armlinux.org.ukSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The mt7530 driver does not make use of the speed, duplex, pause or
advertisement in its phylink_mac_config() implementation, so it can be
marked as a non-legacy driver.
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Move the autoneg bit handling to the PCS validation, which allows us to
get rid of mt753x_phylink_validate() and rely on the default
phylink_generic_validate() implementation for the MAC side.
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Partially convert the mt7530 driver to use phylink's PCS support. This
is a partial implementation as we don't move anything into the
pcs_config method yet - this driver supports SGMII or 1000BASE-X
without in-band.
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Switch mt7530 to use phylink_get_linkmodes() to generate the ethtool
linkmodes that can be supported. We are unable to use the generic
helper for this as pause modes are dependent on the interface as
the Autoneg bit depends on the interface mode.
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Now that mt7530 is not using the basex helper, it becomes unnecessary to
indicate support for both 1000baseX and 2500baseX when one of the 803.3z
PHY interface modes is being selected. Ensure that the driver indicates
only those linkmodes that can actually be supported by the PHY interface
mode.
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Now that we have a better method to select SFP interface modes, we
no longer need to use phylink_helper_basex_speed() in a driver's
validation function.
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode, nor handle
PHY_INTERFACE_MODE_NA in the validation function. Remove these to
simplify the implementation.
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Populate the supported interfaces and MAC capabilities for mt7530,
mt7531 and mt7621 DSA switches. Filling this in will enable phylink
to pre-check the PHY interface mode against the the supported
interfaces bitmap prior to calling the validate function, and will
eventually allow us to convert to using the generic validation.
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When using an external PHY connected using RGMII to mt7531 port 5, the
PHY can be used to used support 1000BASE-X connections. Moreover, if
1000BASE-T is supported, then we should allow 1000BASE-X as well, since
which are supported is a property of the PHY.

Therefore, it makes no sense to exclude this from the linkmodes when
1000BASE-T is supported.

Fixes: c288575f ("net: dsa: mt7530: Add the support of MT7531 switch")
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Joachim Wiberg says:

====================
net: bridge: add support for host l2 mdb entries

Fix to an obvious omissions for layer-2 host mdb entries, this v2 adds
the missing selftest and some minor style fixes.

Note: this patch revealed some worrying problems in how the bridge
      forwards unknown BUM traffic and also how unknown multicast is
      forwarded when a IP multicast router is known, which a another
      (RFC) patch series intend to address.  That series will build
      on this selftest, hence the name of the test.

v2:
  - Add braces to other if/else clauses (Jakub)
  - Add selftest to verify add/del of mac/ipv4/ipv6 mdb entries (Jakub)
====================

Link: https://lore.kernel.org/r/20220411084054.298807-1-troglobit@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Boiler plate for testing static mdb entries.  This first test verifies
adding and removing host mdb entries for all supported types: IPv4,
IPv6, and MAC multicast.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch expands on the earlier work on layer-2 mdb entries by adding
support for host entries.  Due to the fact that host joined entries do
not have any flag field, we infer the permanent flag when reporting the
entries to userspace, which otherwise would be listed as 'temp'.

Before patch:

    ~# bridge mdb add dev br0 port br0 grp 01:00:00:c0:ff:ee permanent
    Error: bridge: Flags are not allowed for host groups.
    ~# bridge mdb add dev br0 port br0 grp 01:00:00:c0:ff:ee
    Error: bridge: Only permanent L2 entries allowed.

After patch:

    ~# bridge mdb add dev br0 port br0 grp 01:00:00:c0:ff:ee permanent
    ~# bridge mdb show
    dev br0 port br0 grp 01:00:00:c0:ff:ee permanent vid 1
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

There are some spelling mistakes in the comment. Fix it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220411032546.2517628-1-lv.ruyi@zte.com.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>