There's no reason for this to be in netdevice.h, it's all
just used in dev.c. Also make it no longer inline and let
the compiler decide to do that by itself.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220325225023.f49b9056fe1c.I6b901a2df00000837a9bd251a8dd259bd23f5ded@changeidSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The bug is here:
	return rule;

The list iterator value 'rule' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.

To fix the bug, return 'rule' when found, otherwise return NULL.

Fixes: ae7a5aff ("net: dsa: bcm_sf2: Keep copy of inserted rules")
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220328032431.22538-1-xiam0nd.tong@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The Broadcom bnxt_ptp driver does not compile with GCC 11.2.2 when
CONFIG_WERROR is enabled. The following error is generated:

drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c: In function ‘bnxt_ptp_enable’:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:400:43: error: array
subscript 255 is above array bounds of ‘struct pps_pin[4]’
[-Werror=array-bounds]
  400 |  ptp->pps_info.pins[pin_id].event = BNXT_PPS_EVENT_EXTERNAL;
      |  ~~~~~~~~~~~~~~~~~~^~~~~~~~
In file included from drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:20:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h:75:24: note: while
referencing ‘pins’
   75 |         struct pps_pin pins[BNXT_MAX_TSIO_PINS];
      |                        ^~~~
cc1: all warnings being treated as errors

This is due to the function ptp_find_pin() returning a pin ID of -1 when
a valid pin is not found and this error never being checked.
Change the TSIO_PIN_VALID() function to also check that a pin ID is not
negative and use this macro in bnxt_ptp_enable() to check the result of
the calls to ptp_find_pin() to return an error early for invalid pins.
This fixes the compilation error.

Cc: <stable@vger.kernel.org>
Fixes: 9e518f25 ("bnxt_en: 1PPS functions to configure TSIO pins")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20220328062708.207079-1-damien.lemoal@opensource.wdc.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

selftest net tls test cases need TLS=m without this the test hangs.
Enabling config TLS solves this problem and runs to complete.
  - CONFIG_TLS=m
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Incorrect output device in nf_egress hook, from Phill Sutter.

2) Preserve liberal flag in TCP conntrack state, reported by Sven Auhagen.

3) Use GFP_KERNEL_ACCOUNT flag for nf_tables objects, from Vasily Averin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

nftables replaces iptables, but it lacks memcg accounting.

This patch account most of the memory allocation associated with nft
and should protect the host from misusing nft inside a memcg restricted
container.
Signed-off-by: Vasily Averin <vvs@openvz.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

When switching zones or network namespaces without doing a ct clear in
between, it is now leaking a reference to the old ct entry. That's
because tcf_ct_skb_nfct_cached() returns false and
tcf_ct_flow_table_lookup() may simply overwrite it.

The fix is to, as the ct entry is not reusable, free it already at
tcf_ct_skb_nfct_cached().
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 2f131de3 ("net/sched: act_ct: Fix flow table lookup after ct clear or switching zones")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recently added smc_sysctl_net_exit() forgot to free
the memory allocated from smc_sysctl_net_init()
for non initial network namespace.

Fixes: 462791bb ("net/smc: add sysctl interface for SMC")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Tony Lu <tonylu@linux.alibaba.com>
Cc: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These are negative tests, testing TLS code rejects certain
operations. They won't pass without TLS enabled, pure TCP
accepts those operations.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: d87d67fd ("selftests: tls: test splicing cmsgs")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang static analysis reports this representative issue
rvu_npc.c:898:15: warning: Assigned value is garbage
  or undefined
  req.match_id = action.match_id;
               ^ ~~~~~~~~~~~~~~~

The initial setting of action is conditional on
 if (is_mcam_entry_enabled(...))
The later check of action.op will sometimes be garbage.
So initialize action.

Reduce setting of
  *(u64 *)&action = 0x00;
to
  *(u64 *)&action = 0;

Fixes: 967db352 ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the possible failure of the allocation, devm_kzalloc() may return NULL
pointer.
Therefore, it should be better to check the 'db' in order to prevent
the dereference of NULL pointer.

Fixes: 10615907 ("net: sparx5: switchdev: adding frame DMA functionality")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the link layer is terminating, x25->neighbour will be set to NULL
in x25_disconnect(). As a result, it could cause null-ptr-deref bugs in
x25_sendmsg(),x25_recvmsg() and x25_connect(). One of the bugs is
shown below.

    (Thread 1)                 |  (Thread 2)
x25_link_terminated()          | x25_recvmsg()
 x25_kill_by_neigh()           |  ...
  x25_disconnect()             |  lock_sock(sk)
   ...                         |  ...
   x25->neighbour = NULL //(1) |
   ...                         |  x25->neighbour->extended //(2)

The code sets NULL to x25->neighbour in position (1) and dereferences
x25->neighbour in position (2), which could cause null-ptr-deref bug.

This patch adds lock_sock() in x25_kill_by_neigh() in order to synchronize
with x25_sendmsg(), x25_recvmsg() and x25_connect(). What`s more, the
sock held by lock_sock() is not NULL, because it is extracted from x25_list
and uses x25_list_lock to synchronize.

Fixes: 4becb7ee ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang static analysis reports this issue
qlcnic_dcb.c:382:10: warning: Assigned value is
  garbage or undefined
  mbx_out = *val;
          ^ ~~~~

val is set in the qlcnic_dcb_query_hw_capability() wrapper.
If there is no query_hw_capability op in dcp, success is
returned without setting the val.

For this and similar wrappers, return -EOPNOTSUPP.

Fixes: 14d385b9 ("qlcnic: dcb: Query adapter DCB capabilities.")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix build errors when PTP_1588_CLOCK=m and SPARX5_SWTICH=y.

arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ethtool.o: in function `sparx5_get_ts_info':
sparx5_ethtool.c:(.text+0x146): undefined reference to `ptp_clock_index'
arc-linux-ld: sparx5_ethtool.c:(.text+0x146): undefined reference to `ptp_clock_index'
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o: in function `sparx5_ptp_init':
sparx5_ptp.c:(.text+0xd56): undefined reference to `ptp_clock_register'
arc-linux-ld: sparx5_ptp.c:(.text+0xd56): undefined reference to `ptp_clock_register'
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o: in function `sparx5_ptp_deinit':
sparx5_ptp.c:(.text+0xf30): undefined reference to `ptp_clock_unregister'
arc-linux-ld: sparx5_ptp.c:(.text+0xf30): undefined reference to `ptp_clock_unregister'
arc-linux-ld: sparx5_ptp.c:(.text+0xf38): undefined reference to `ptp_clock_unregister'
arc-linux-ld: sparx5_ptp.c:(.text+0xf46): undefined reference to `ptp_clock_unregister'
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o:sparx5_ptp.c:(.text+0xf46): more undefined references to `ptp_clock_unregister' follow

Fixes: 3cfa11ba ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Steen Hegelund <steen.hegelund@microchip.com>
Cc: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, function hclge_mdio_read() will return 0 if during reset(the
cmd state will be set to disable).

If use general phy driver, the phy_state_machine() will update phy speed
every second in function genphy_read_status_fixed() when PHY is set to
autoneg off, no matter of link down or link up.

If phy driver happens to read BMCR register during reset, phy speed will
be updated to 10Mpbs as BMCR register value is 0. So it may call phy can
not link up if previous speed is not 10Mpbs.

To fix this problem, function hclge_mdio_read() should return -EBUSY if
the cmd state is disable. So does function hclge_mdio_write().

Fixes: 1c124938 ("net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When pci devices init failed and haven't reinit, priv->ring is
NULL and hns3_set/get_ringparam() will access priv->ring. it
causes call trace.

So, add NULL pointer check for hns3_set/get_ringparam() to
avoid this situation.

Fixes: 5668abda ("net: hns3: add support for set_ringparam")
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When pci device reset failed, it does uninit operation and priv->ring
is NULL, it causes accessing NULL pointer error.

Add netdev reset check for hns3_set_tunable() to fix it.

Fixes: 99f6b5fb ("net: hns3: use bounce buffer when rx page can not be reused")
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After disable sriov, VF still has some config and info need to be
cleaned, which configured by PF. This patch clean the HW config
and SW struct vport->vf_info.

Fixes: fa8d82e8 ("net: hns3: Add support of .sriov_configure in HNS3 driver")
Signed-off-by: Peng Li<lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add max order judgement for tx spare buffer to avoid triggering
call trace, print related fail information instead, when user
set tx spare buf size to a large value which causes order
exceeding 10.

Fixes: e445f08a ("net: hns3: add support to set/get tx copybreak buf size via ethtool for hns3 driver")
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When use ethtoool set tx copybreak buf size to a large value
which causes order exceeding 10 or memory is not enough,
it causes allocating tx copybreak buffer failed and print
"the active tx spare buf is 0, not enabled tx spare buffer",
however, use --get-tunable parameter query tx copybreak buf
size and it indicates setting value not 0.

So, it's necessary to change the print value from setting
value to 0.

Set kinfo.tx_spare_buf_size to 0 when set tx copybreak buf size failed.

Fixes: e445f08a ("net: hns3: add support to set/get tx copybreak buf size via ethtool for hns3 driver")
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The purpose of the last test case is to test VXLAN encapsulation and
decapsulation when the underlay lookup takes place in a non-default VRF.
This is achieved by enslaving the physical device of the tunnel to a
VRF.

The binding of the VXLAN UDP socket to the VRF happens when the VXLAN
device itself is opened, not when its physical device is opened. This
was also mentioned in the cited commit ("tests that moving the underlay
from a VRF to another works when down/up the VXLAN interface"), but the
test did something else.

Fix it by reopening the VXLAN device instead of its physical device.

Before:

 # ./test_vxlan_under_vrf.sh
 Checking HV connectivity                                           [ OK ]
 Check VM connectivity through VXLAN (underlay in the default VRF)  [ OK ]
 Check VM connectivity through VXLAN (underlay in a VRF)            [FAIL]

After:

 # ./test_vxlan_under_vrf.sh
 Checking HV connectivity                                           [ OK ]
 Check VM connectivity through VXLAN (underlay in the default VRF)  [ OK ]
 Check VM connectivity through VXLAN (underlay in a VRF)            [ OK ]

Fixes: 03f1c26b ("test/net: Add script for VXLAN underlay in a VRF")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220324200514.1638326-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A Broadcom AC201 PHY (same entry as 5241) would be flagged by the
Broadcom UniMAC MDIO controller as not completing the turn around
properly since the PHY expects 65 MDC clock cycles to complete a write
cycle, and the MDIO controller was only sending 64 MDC clock cycles as
determined by looking at a scope shot.

This would make the subsequent read fail with the UniMAC MDIO controller
command field having MDIO_READ_FAIL set and we would abort the
brcm_fet_config_init() function and thus not probe the PHY at all.

After issuing a software reset, wait for at least 1ms which is well
above the 1us reset delay advertised by the datasheet and issue a dummy
read to let the PHY turn around the line properly. This read
specifically ignores -EIO which would be returned by MDIO controllers
checking for the line being turned around.

If we have a genuine reaad failure, the next read of the interrupt
status register would pick it up anyway.

Fixes: d7a2ed92 ("broadcom: Add AC131 phy support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220324232438.1156812-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

My latest patch, attempting to fix the refcount leak in a minimal
way turned out to add a new bug.

Whenever the bind operation fails before we attempt to grab
a reference count on a device, we might release the device refcount
of a prior successful bind() operation.

syzbot was not happy about this [1].

Note to stable teams:

Make sure commit b37a4668 ("netdevice: add the case if dev is NULL")
is already present in your trees.

[1]
general protection fault, probably for non-canonical address 0xdffffc0000000070: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387]
CPU: 1 PID: 3590 Comm: syz-executor361 Tainted: G        W         5.17.0-syzkaller-04796-g169e7776 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:llc_ui_connect+0x400/0xcb0 net/llc/af_llc.c:500
Code: 80 3c 02 00 0f 85 fc 07 00 00 4c 8b a5 38 05 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 80 03 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a9 07 00 00 49 8b b4 24 80 03 00 00 4c 89 f2 48
RSP: 0018:ffffc900038cfcc0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff8880756eb600 RCX: 0000000000000000
RDX: 0000000000000070 RSI: ffffc900038cfe3e RDI: 0000000000000380
RBP: ffff888015ee5000 R08: 0000000000000001 R09: ffff888015ee5535
R10: ffffed1002bdcaa6 R11: 0000000000000000 R12: 0000000000000000
R13: ffffc900038cfe37 R14: ffffc900038cfe38 R15: ffff888015ee5012
FS:  0000555555acd300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000280 CR3: 0000000077db6000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __sys_connect_file+0x155/0x1a0 net/socket.c:1900
 __sys_connect+0x161/0x190 net/socket.c:1917
 __do_sys_connect net/socket.c:1927 [inline]
 __se_sys_connect net/socket.c:1924 [inline]
 __x64_sys_connect+0x6f/0xb0 net/socket.c:1924
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f016acb90b9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd417947f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f016acb90b9
RDX: 0000000000000010 RSI: 0000000020000140 RDI: 0000000000000003
RBP: 00007f016ac7d0a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f016ac7d130
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:llc_ui_connect+0x400/0xcb0 net/llc/af_llc.c:500

Fixes: 764f4eb6 ("llc: fix netdevice reference leaks in llc_ui_bind()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: 赵子轩 <beraphin@gmail.com>
Cc: Stoyan Manolov <smanolov@suse.de>
Link: https://lore.kernel.org/r/20220325035827.360418-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================

Link: https://lore.kernel.org/r/20220324125450.56417-1-huangguangbin2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, when PF set VF VLAN, it sends notify mailbox to VF
if VF alive. VF stop its traffic, and send request mailbox
to PF, then PF updates VF VLAN. It's a bit complex. If VF is
killed before sending request, PF will not set VF VLAN without
any log.

This patch refines the process, PF can set VF VLAN direclty,
and then notify the VF. If VF is resetting at that time, the
notify may be dropped, so VF should query it after reset finished.

Fixes: 92f11ea1 ("net: hns3: fix set port based VLAN issue for VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When adding port base VLAN, vf VLAN need to remove from HW and modify
the vlan state in vf VLAN list as false. If the periodicity task is
freeing the same node, it may cause "use after free" error.
This patch adds a vlan list lock to protect the vlan list.

Fixes: c6075b19 ("net: hns3: Record VF vlan tables")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, Port base vlan is initiated by PF and configured to its VFs,
by using command "ip link set <pf name> vf <vf id> vlan <vlan id>".
When a global reset was triggered, the hardware vlan table and the soft
recorded vlan information will be cleared by PF, and restored them until
VFs were ready. There is a short time window between the table had been
cleared and before table restored. If configured a new port base vlan tag
at this moment, driver will check the soft recorded vlan information,
and find there hasn't the old tag in it, which causing a warning print.

Due to the port base vlan is managed by PF, so the VFs's port base vlan
restoring should be handled by PF when PF was ready.

This patch fixes it.

Fixes: 039ba863 ("net: hns3: optimize the filter table entries handling when resetting")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If the MAC address A is configured to vport A and then vport B. The MAC
address of vport A in the hardware becomes invalid. If the address of
vport A is changed to MAC address B, the driver needs to delete the MAC
address A of vport A. Due to the MAC address A of vport A has become
invalid in the hardware entry, so "-ENOENT" is returned. In this case, the
"used_umv_size" value recorded in driver is not updated. As a result, the
MAC entry status of the software is inconsistent with that of the hardware.

Therefore, the driver updates the umv size even if the MAC entry cannot be
found. Ensure that the software and hardware status is consistent.

Fixes: ee4bcd3b ("net: hns3: refactor the MAC address configure")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Casper Andersson says:

====================
net: sparx5: Refactor based on feedback on

This is a follow up to a previous patch that was merged
before manufacturer could give feedback. This addresses
the feedback. See link below for previous patch series.
https://lore.kernel.org/netdev/20220322081823.wqbx7vud4q7qtjuq@wse-c0155/T/#t
====================

Link: https://lore.kernel.org/r/20220324113853.576803-1-casper.casan@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

- Remove mact_lookup and use new mact_find instead.
- Make pgid_read_mask function.
- Set PGID arbiter to start searching at PGID_BASE + 8.

This is according to feedback on previous patch.
https://lore.kernel.org/netdev/20220322081823.wqbx7vud4q7qtjuq@wse-c0155/T/#tSigned-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Removes PGID handling for GLAG since it is not used
yet. According to feedback on previous patch.
https://lore.kernel.org/netdev/20220322081823.wqbx7vud4q7qtjuq@wse-c0155/T/#tSigned-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Let user space properly determine that the enetc driver provides
software timestamps.

Fixes: 4caefbce ("enetc: add software timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220324161210.4122281-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Stefano Garzarella says:

====================
vsock/virtio: enable VQs early on probe and finish the setup before using them

The first patch fixes a virtio-spec violation. The other two patches
complete the driver configuration before using the VQs in the probe.

The patch order should simplify backporting in stable branches.

v2: https://lore.kernel.org/netdev/20220323084954.11769-1-sgarzare@redhat.com/
v1: https://lore.kernel.org/netdev/20220322103823.83411-1-sgarzare@redhat.com/
====================

Link: https://lore.kernel.org/r/20220323173625.91119-1-sgarzare@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

virtio spec requires drivers to set DRIVER_OK before using VQs.
This is set automatically after probe returns, but virtio-vsock
driver uses VQs in the probe function to fill rx and event VQs
with new buffers.

Let's fix this, calling virtio_device_ready() before using VQs
in the probe function.

Fixes: 0ea9e1d3 ("VSOCK: Introduce virtio_transport.ko")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Complete the driver configuration, reading the negotiated features,
before using the VQs in the virtio_vsock_probe().

Fixes: 53efbba1 ("virtio/vsock: enable SEQPACKET for transport")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When we fill VQs with empty buffers and kick the host, it may send
an interrupt. `vdev->priv` must be initialized before this since it
is used in the virtqueue callbacks.

Fixes: 0deab087 ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Adds the driver_info and IDs for the AX88179 based Allied Telesis AT-UMC
family of devices.
Signed-off-by: Greg Jesionowski <jesionowskigreg@gmail.com>
Link: https://lore.kernel.org/r/20220323220024.GA36800@test-HP-EliteDesk-800-G1-SFFSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The kernel test robot reported build warnings with a randconfig that
built realtek-{smi,mdio} without CONFIG_OF set. Since both interface
drivers are using OF and will not probe without, add the corresponding
dependency to Kconfig.

Link: https://lore.kernel.org/all/202203231233.Xx73Y40o-lkp@intel.com/
Link: https://lore.kernel.org/all/202203231439.ycl0jg50-lkp@intel.com/
Fixes: aac94001 ("net: dsa: realtek: add new mdio interface for drivers")
Fixes: 765c39a4 ("net: dsa: realtek: convert subdrivers into modules")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20220323124225.91763-1-alvin@pqrs.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When the Qualcomm ethqos driver is properly described in its associated
GDSC power-domain, the hardware will be powered down and loose its state
between qcom_ethqos_probe() and stmmac_init_dma_engine().

The result of this is that the functional clock from the RGMII IO macro
is no longer provides and the DMA software reset in dwmac4_dma_reset()
will time out, due to lacking clock signal.

Re-enable the functional clock, as part of the Qualcomm specific clock
enablement sequence to avoid this problem.

The final clock configuration will be adjusted by ethqos_fix_mac_speed()
once the link is being brought up.

Fixes: a7c30e62 ("net: stmmac: Add driver for Qualcomm ethqos")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-and-reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20220323033255.2282930-1-bjorn.andersson@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>