It was reported [0] that since the referenced commit a warning is
triggered in phylib that complains about paged operations being used
with a PHY driver that doesn't support this. The commit isn't wrong,
just for one chip version (RTL8105e) no dedicated PHY driver exists
yet. So add the missing PHY driver.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=202103

Fixes: 3a129e3f ("r8169: switch to phylib functions in more places")
Reported-by: jhdskag3 <jhdskag3@tutanota.com>
Tested-by: jhdskag3 <jhdskag3@tutanota.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It was reported [0] that network doesn't wake up on cable plug-in with
certain chip versions. Reason is that on these chip versions the PHY
doesn't detect cable plug-in when being in power-down mode. So prevent
the PHY from powering down if WoL is enabled.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=202103

Fixes: 95fb8bb3 ("net: phy: force phy suspend when calling phy_stop")
Reported-by: jhdskag3 <jhdskag3@tutanota.com>
Tested-by: jhdskag3 <jhdskag3@tutanota.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alan reported [0] that network is broken since the referenced commit
when using jumbo frames. This commit isn't wrong, it just revealed
another issue that has been existing before. According to the vendor
driver the RTL8168e-specific jumbo config doesn't apply for RTL8168evl.

[0] https://lkml.org/lkml/2019/11/30/119

Fixes: 4ebcb113 ("r8169: fix jumbo packet handling on resume from suspend")
Reported-by: Alan J. Wylie <alan@wylie.me.uk>
Tested-by: Alan J. Wylie <alan@wylie.me.uk>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Indent a Kconfig continuation line to improve readability.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sathya Perla <sathya.perla@broadcom.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

It is possible that tc stats get checked before the packet we check for
actually arrived into the interface and accounted for.
Fix it by checking for the expected result in a loop until
timeout is reached (by default 1 second).

Fixes: 07e5c751 ("selftests: forwarding: Introduce tc flower matching tests")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a classful qdisc's child qdisc has set the flag
TCQ_F_CPUSTATS (pfifo_fast for example), the child qdisc's
cpu_bstats should be passed to gnet_stats_copy_basic(),
but many classful qdisc didn't do that. As a result,
`tc -s class show dev DEV` always return 0 for bytes and
packets in this case.

Pass the child qdisc's cpu_bstats to gnet_stats_copy_basic()
to fix this issue.

The qstats also has this problem, but it has been fixed
in 5dd431b6 ("net: sched: introduce and use qstats read...")
and bstats still remains buggy.

Fixes: 22e0f8b9 ("net: sched: make bstats per cpu and estimator RCU safe")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The recently updated ALE APIs cpsw_ale_del_mcast() and
cpsw_ale_del_vlan_modify() have an issue and will not delete ALE entry even
if VLAN/mcast group has no more members. Hence fix it here and delete ALE
entry if !port_mask.

The issue affected only new cpsw switchdev driver.

Fixes: e85c1437 ("net: ethernet: ti: ale: modify vlan/mdb api for switchdev")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If IPV6 is not set and CONFIG_MLX5_ESWITCH is y,
building fails:

drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c:322:5: error: redefinition of mlx5e_tc_tun_create_header_ipv6
 int mlx5e_tc_tun_create_header_ipv6(struct mlx5e_priv *priv,
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c:7:0:
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h:67:1: note: previous definition of mlx5e_tc_tun_create_header_ipv6 was here
 mlx5e_tc_tun_create_header_ipv6(struct mlx5e_priv *priv,
 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Use #ifdef to guard this, also move mlx5e_route_lookup_ipv6
to cleanup unused warning.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e689e998 ("net/mlx5e: TC, Stub out ipv6 tun create header function")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some versions of iproute2 will output more than one line per entry, which
will cause the test to fail, like:

TEST: ipv6: list and flush cached exceptions                        [FAIL]
  can't list cached exceptions

That happens, for example, with iproute2 4.15.0. When using the -oneline
option, this will work just fine:

TEST: ipv6: list and flush cached exceptions                        [ OK ]

This also works just fine with a more recent version of iproute2, like
5.4.0.

For some reason, two lines are printed for the IPv4 test no matter what
version of iproute2 is used. Use the same -oneline parameter there instead
of counting the lines twice.

Fixes: b964641e ("selftests: pmtu: Make list_flush_ipv6_exception test more demanding")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tung Nguyen says:

====================
tipc: Fix some bugs at socket layer

This series fixes some bugs at socket layer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Scenario:
1. A client socket initiates a SYN message to a listening socket.
2. The send link is congested, the SYN message is put in the
send link and a wakeup message is put in wakeup queue.
3. The congestion situation is abated, the wakeup message is
pulled out of the wakeup queue. Function tipc_sk_push_backlog()
is called to send out delayed messages by Nagle. However,
the client socket is still in CONNECTING state. So, it sends
the SYN message in the socket write queue to the listening socket
again.
4. The listening socket receives the first SYN message and creates
first server socket. The client socket receives ACK- and establishes
a connection to the first server socket. The client socket closes
its connection with the first server socket.
5. The listening socket receives the second SYN message and creates
second server socket. The second server socket sends ACK- to the
client socket, but it has been closed. It results in connection
reset error when reading from the server socket in user space.

Solution: return from function tipc_sk_push_backlog() immediately
if there is pending SYN message in the socket write queue.

Fixes: c0bceb97 ("tipc: add smart nagle feature")
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In function __tipc_shutdown(), the timeout value passed to
tipc_wait_for_cond() is not jiffies.

This commit fixes it by converting that value from milliseconds
to jiffies.

Fixes: 365ad353 ("tipc: reduce risk of user starvation during link congestion")
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When tipc_sk_timeout() is executed but user space is grabbing
ownership, this function rearms itself and returns. However, the
socket reference counter is not reduced. This causes potential
unexpected behavior.

This commit fixes it by calling sock_put() before tipc_sk_timeout()
returns in the above-mentioned case.

Fixes: afe8792f ("tipc: refactor function tipc_sk_timeout()")
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When initiating a connection message to a server side, the connection
message is cloned and added to the socket write queue. However, if the
cloning is failed, only the socket write queue is purged. It causes
memory leak because the original connection message is not freed.

This commit fixes it by purging the list of connection message when
it cannot be cloned.

Fixes: 67879274 ("tipc: buffer overflow handling in listener socket")
Reported-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This driver forgets to kill tasklet in remove.
Add the call to fix it.

Fixes: 032dc41b ("net: macb: Handle HRESP error")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net: tls: fix scatter-gather list issues

This series kicked of by a syzbot report fixes three issues around
scatter gather handling in the TLS code. First patch fixes a use-
-after-free situation which may occur if record was freed on error.
This could have already happened in BPF paths, and patch 2 now makes
the same condition occur in non-BPF code.

Patch 2 fixes the problem spotted by syzbot. If encryption failed
we have to clean the end markings from scatter gather list. As
suggested by John the patch frees the record entirely and caller
may retry copying data from user space buffer again.

Third patch fixes a bug in the TLS 1.3 code spotted while working
on patch 2. TLS 1.3 may effectively overflow the SG list which
leads to the BUG() in sg_page() being triggered.

Patch 4 adds a test case which triggers this bug reliably.

Next two patches are small cleanups of dead code and code which
makes dangerous assumptions.

Last but not least two minor improvements to the sockmap tests.

Tested:
 - bpf/test_sockmap
 - net/tls
 - syzbot repro (which used error injection, hence no direct
   selftest is added to preserve it).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

perror(str) is basically equivalent to
print("%s: %s\n", str, strerror(errno)).
New line or colon at the end of str is
a mistake/breaks formatting.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

test_sockmap creates a temporary file to use for sendpage.
this may fail for various reasons. Handle the error rather
than segfault.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Partially sent record cleanup path increments an SG entry
directly instead of using sg_next(). This should not be a
problem today, as encrypted messages should be always
allocated as arrays. But given this is a cleanup path it's
easy to miss was this ever to change. Use sg_next(), and
simplify the code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Looks like when BPF support was added by commit d3b18ad3
("tls: add bpf support to sk_msg handling") and
commit d829e9c4 ("tls: convert to generic sk_msg interface")
it broke/removed the support for in-place crypto as added by
commit 4e6d4720 ("tls: Add support for inplace records
encryption").

The inplace_crypto member of struct tls_rec is dead, inited
to zero, and sometimes set to zero again. It used to be
set to 1 when record was allocated, but the skmsg code doesn't
seem to have been written with the idea of in-place crypto
in mind.

Since non trivial effort is required to bring the feature back
and we don't really have the HW to measure the benefit just
remove the left over support for now to avoid confusing readers.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a sendmsg test with very fragmented messages. This should
fill up sk_msg and test the boundary conditions.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS 1.3 started using the entry at the end of the SG array
for chaining-in the single byte content type entry. This mostly
works:

[ E E E E E E . . ]
  ^           ^
   start       end

                 E < content type
               /
[ E E E E E E C . ]
  ^           ^
   start       end

(Where E denotes a populated SG entry; C denotes a chaining entry.)

If the array is full, however, the end will point to the start:

[ E E E E E E E E ]
  ^
   start
   end

And we end up overwriting the start:

    E < content type
   /
[ C E E E E E E E ]
  ^
   start
   end

The sg array is supposed to be a circular buffer with start and
end markers pointing anywhere. In case where start > end
(i.e. the circular buffer has "wrapped") there is an extra entry
reserved at the end to chain the two halves together.

[ E E E E E E . . l ]

(Where l is the reserved entry for "looping" back to front.

As suggested by John, let's reserve another entry for chaining
SG entries after the main circular buffer. Note that this entry
has to be pointed to by the end entry so its position is not fixed.

Examples of full messages:

[ E E E E E E E E . l ]
  ^               ^
   start           end

   <---------------.
[ E E . E E E E E E l ]
      ^ ^
   end   start

Now the end will always point to an unused entry, so TLS 1.3
can always use it.

Fixes: 130b392c ("net: tls: Add tls 1.3 support")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When tls_do_encryption() fails the SG lists are left with the
SG_END and SG_CHAIN marks in place. One could hope that once
encryption fails we will never see the record again, but that
is in fact not true. Commit d3b18ad3 ("tls: add bpf support
to sk_msg handling") added special handling to ENOMEM and ENOSPC
errors which mean we may see the same record re-submitted.

As suggested by John free the record, the BPF code is already
doing just that.

Reported-by: syzbot+df0d4ec12332661dd1f9@syzkaller.appspotmail.com
Fixes: d3b18ad3 ("tls: add bpf support to sk_msg handling")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf_exec_tx_verdict() may free the record if tls_push_record()
fails, or if the entire record got consumed by BPF. Re-check
ctx->open_rec before touching the data.

Fixes: d3b18ad3 ("tls: add bpf support to sk_msg handling")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - improve dma-debug scalability (Eric Dumazet)

 - tiny dma-debug cleanup (Dan Carpenter)

 - check for vmap memory in dma_map_single (Kees Cook)

 - check for dma_addr_t overflows in dma-direct when using DMA offsets
   (Nicolas Saenz Julienne)

 - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
   Saenz Julienne)

 - fix arm-nommu dma-ranges handling (Vladimir Murzin)

 - use __initdata in CMA (Shyam Saini)

 - replace the bus dma mask with a limit (Nicolas Saenz Julienne)

 - merge the remapping helpers into the main dma-direct flow (me)

 - switch xtensa to the generic dma remap handling (me)

 - various cleanups around dma_capable (me)

 - remove unused dev arguments to various dma-noncoherent helpers (me)

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:

* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
  dma-mapping: treat dev->bus_dma_mask as a DMA limit
  dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
  dma-direct: don't check swiotlb=force in dma_direct_map_resource
  dma-debug: clean up put_hash_bucket()
  powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
  dma-direct: avoid a forward declaration for phys_to_dma
  dma-direct: unify the dma_capable definitions
  dma-mapping: drop the dev argument to arch_sync_dma_for_*
  x86/PCI: sta2x11: use default DMA address translation
  dma-direct: check for overflows on 32 bit DMA addresses
  dma-debug: increase HASH_SIZE
  dma-debug: reorder struct dma_debug_entry fields
  xtensa: use the generic uncached segment support
  dma-mapping: merge the generic remapping helpers into dma-direct
  dma-direct: provide mmap and get_sgtable method overrides
  dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
  dma-direct: remove __dma_direct_free_pages
  usb: core: Remove redundant vmap checks
  kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
  dma-debug: add a schedule point in debug_dma_dump_mappings()
  ...

Pull generic ioremap support from Christoph Hellwig:
 "This adds the remaining bits for an entirely generic ioremap and
  iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant
  mess of weird ioremap variants we had with no users outside the arch
  code.

  For now just the three newest ports use the code, but there is more
  than a handful others that can be converted without too much work.

  Summary:

   - clean up various obsolete ioremap and iounmap variants

   - add a new generic ioremap implementation and switch csky, nds32 and
     riscv over to it"

* tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits)
  nds32: use generic ioremap
  csky: use generic ioremap
  csky: remove ioremap_cache
  riscv: use the generic ioremap code
  lib: provide a simple generic ioremap implementation
  sh: remove __iounmap
  nios2: remove __iounmap
  hexagon: remove __iounmap
  m68k: rename __iounmap and mark it static
  arch: rely on asm-generic/io.h for default ioremap_* definitions
  asm-generic: don't provide ioremap for CONFIG_MMU
  asm-generic: ioremap_uc should behave the same with and without MMU
  xtensa: clean up ioremap
  x86: Clean up ioremap()
  parisc: remove __ioremap
  nios2: remove __ioremap
  alpha: remove the unused __ioremap wrapper
  hexagon: clean up ioremap
  ia64: rename ioremap_nocache to ioremap_uc
  unicore32: remove ioremap_cached
  ...

Pull more io_uring updates from Jens Axboe:
 "As mentioned in the first pull request, there was a later batch as
  well. This contains fixes to the stuff that already went in, cleanups,
  and a few later additions. In particular, this contains:

   - Cleanups/fixes/unification of the submission and completion path
     (Pavel,me)

   - Linked timeouts improvements (Pavel,me)

   - Error path fixes (me)

   - Fix lookup window where cancellations wouldn't work (me)

   - Improve DRAIN support (Pavel)

   - Fix backlog flushing -EBUSY on submit (me)

   - Add support for connect(2) (me)

   - Fix for non-iter based fixed IO (Pavel)

   - creds inheritance for async workers (me)

   - Disable cmsg/ancillary data for sendmsg/recvmsg (me)

   - Shrink io_kiocb to 3 cachelines (me)

   - NUMA fix for io-wq (Jann)"

* tag 'for-5.5/io_uring-post-20191128' of git://git.kernel.dk/linux-block: (42 commits)
  io_uring: make poll->wait dynamically allocated
  io-wq: shrink io_wq_work a bit
  io-wq: fix handling of NUMA node IDs
  io_uring: use kzalloc instead of kcalloc for single-element allocations
  io_uring: cleanup io_import_fixed()
  io_uring: inline struct sqe_submit
  io_uring: store timeout's sqe->off in proper place
  net: disallow ancillary data for __sys_{send,recv}msg_file()
  net: separate out the msghdr copy from ___sys_{send,recv}msg()
  io_uring: remove superfluous check for sqe->off in io_accept()
  io_uring: async workers should inherit the user creds
  io-wq: have io_wq_create() take a 'data' argument
  io_uring: fix dead-hung for non-iter fixed rw
  io_uring: add support for IORING_OP_CONNECT
  net: add __sys_connect_file() helper
  io_uring: only return -EBUSY for submit on non-flushed backlog
  io_uring: only !null ptr to io_issue_sqe()
  io_uring: simplify io_req_link_next()
  io_uring: pass only !null to io_req_find_next()
  io_uring: remove io_free_req_find_next()
  ...

Pull drm updates from Dave Airlie:
 "Lots of stuff in here, though it hasn't been too insane this merge
  apart from dealing with the security fun.

  uapi:
   - export different colorspace properties on DP vs HDMI
   - new fourcc for ARM 16x16 block format
   - syncobj: allow querying last submitted timeline value
   - DRM_FORMAT_BIG_ENDIAN defined as unsigned

  core:
   - allow using gem vma manager in ttm
   - connector/encoder/bridge doc fixes
   - allow more than 3 encoders for a connector
   - displayport mst suspend/resume reprobing support
   - vram lazy unmapping, uniform vram mm and gem vram
   - edid cleanups + AVI informframe bar info
   - displayport helpers - dpcd parser added

  dp_cec:
   - Allow a connector to be associated with a cec device

  ttm:
   - pipelining with no_gpu_wait fix
   - always keep BOs on the LRU

  sched:
   - allow free_job routine to sleep

  i915:
   - Block userptr from mappable GTT
   - i915 perf uapi versioning
   - OA stream dynamic reconfiguration
   - make context persistence optional
   - introduce DRM_I915_UNSTABLE Kconfig
   - add fake lmem testing under unstable
   - BT.2020 support for DP MSA
   - struct mutex elimination
   - Tigerlake display/PLL/power management improvements
   - Jasper Lake PCH support
   - refactor PMU for multiple GPUs
   - Icelake firmware update
   - Split out vga + switcheroo code

  amdgpu:
   - implement dma-buf import/export without helpers
   - vega20 RAS enablement
   - DC i2c over aux fixes
   - renoir GPU reset
   - DC HDCP support
   - BACO support for CI/VI asics
   - MSI-X support
   - Arcturus EEPROM support
   - Arcturus VCN encode support
   - VCN dynamic powergating on RV/RV2

  amdkfd:
   - add navi12/14/renoir support to kfd

  radeon:
   - SI dpm fix ported from amdgpu
   - fix bad DMA on ppc platforms

  gma500:
   - memory leak fixes

  qxl:
   - convert to new gem mmap

  exynos:
   - build warning fix

  komeda:
   - add aclk sysfs attribute

  v3d:
   - userspace cleanup uapi change

  i810:
   - fix for underflow in dispatch ioctls

  ast:
   - refactor show_cursor

  mgag200:
   - refactor show_cursor

  arcgpu:
   - encoder finding improvements

  mediatek:
   - mipi_tx, dsi and partial crtc support for MT8183 SoC
   - rotation support

  meson:
   - add suspend/resume support

  omap:
   - misc refactors

  tegra:
   - DisplayPort support for Tegra 210, 186 and 194.
   - IOMMU-backed DMA API fixes

  panfrost:
   - fix lockdep issue
   - simplify devfreq integration

  rcar-du:
   - R8A774B1 SoC support
   - fixes for H2 ES2.0

  sun4i:
   - vcc-dsi regulator support

  virtio-gpu:
   - vmexit vs spinlock fix
   - move to gem shmem helpers
   - handle large command buffers with cma"

* tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm: (1855 commits)
  drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10
  drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub
  drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF.
  drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VF
  drm/amdgpu/gfx10: re-init clear state buffer after gpu reset
  merge fix for "ftrace: Rework event_create_dir()"
  drm/amdgpu: Update Arcturus golden registers
  drm/amdgpu/gfx10: fix out-of-bound mqd_backup array access
  drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt
  Revert "drm/amd/display: enable S/G for RAVEN chip"
  drm/amdgpu: disable gfxoff on original raven
  drm/amdgpu: remove experimental flag for Navi14
  drm/amdgpu: disable gfxoff when using register read interface
  drm/amdgpu/powerplay: properly set PP_GFXOFF_MASK (v2)
  drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2
  drm/radeon: fix bad DMA from INTERRUPT_CNTL2
  drm/amd/display: Fix debugfs on MST connectors
  drm/amdgpu/nv: add asic func for fetching vbios from rom directly
  drm/amdgpu: put flush_delayed_work at first
  drm/amdgpu/vcn2.5: fix the enc loop with hw fini
  ...

Pull networking fixes from David Miller:
 "This is mostly to fix the iwlwifi regression:

  1) Flush GRO state properly in iwlwifi driver, from Alexander Lobakin.

  2) Validate TIPC link name with properly length macro, from John
     Rutherford.

  3) Fix completion init and device query timeouts in ibmvnic, from
     Thomas Falcon.

  4) Fix SKB size calculation for netlink messages in psample, from
     Nikolay Aleksandrov.

  5) Similar kind of fix for OVS flow dumps, from Paolo Abeni.

  6) Handle queue allocation failure unwind properly in gve driver, we
     could try to release pages we didn't allocate. From Jeroen de
     Borst.

  7) Serialize TX queue SKB list accesses properly in mscc ocelot
     driver. From Yangbo Lu"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
  net: usb: aqc111: Use the correct style for SPDX License Identifier
  net: phy: Use the correct style for SPDX License Identifier
  net: wireless: intel: iwlwifi: fix GRO_NORMAL packet stalling
  net: mscc: ocelot: use skb queue instead of skbs list
  net: mscc: ocelot: avoid incorrect consuming in skbs list
  gve: Fix the queue page list allocated pages count
  net: inet_is_local_reserved_port() port arg should be unsigned short
  openvswitch: fix flow command message size
  net: phy: dp83869: Fix return paths to return proper values
  net: psample: fix skb_over_panic
  net: usbnet: Fix -Wcast-function-type
  net: hso: Fix -Wcast-function-type
  net: port < inet_prot_sock(net) --> inet_port_requires_bind_service(net, port)
  ibmvnic: Serialize device queries
  ibmvnic: Bound waits for device queries
  ibmvnic: Terminate waiting device threads after loss of service
  ibmvnic: Fix completion structure initialization
  net-sctp: replace some sock_net(sk) with just 'net'
  net: Fix a documentation bug wrt. ip_unprivileged_port_start
  tipc: fix link name length check

Pull tracing updates from Steven Rostedt:
 "New tracing features:

   - New PERMANENT flag to ftrace_ops when attaching a callback to a
     function.

     As /proc/sys/kernel/ftrace_enabled when set to zero will disable
     all attached callbacks in ftrace, this has a detrimental impact on
     live kernel tracing, as it disables all that it patched. If a
     ftrace_ops is registered to ftrace with the PERMANENT flag set, it
     will prevent ftrace_enabled from being disabled, and if
     ftrace_enabled is already disabled, it will prevent a ftrace_ops
     with PREMANENT flag set from being registered.

   - New register_ftrace_direct().

     As eBPF would like to register its own trampolines to be called by
     the ftrace nop locations directly, without going through the ftrace
     trampoline, this function has been added. This allows for eBPF
     trampolines to live along side of ftrace, perf, kprobe and live
     patching. It also utilizes the ftrace enabled_functions file that
     keeps track of functions that have been modified in the kernel, to
     allow for security auditing.

   - Allow for kernel internal use of ftrace instances.

     Subsystems in the kernel can now create and destroy their own
     tracing instances which allows them to have their own tracing
     buffer, and be able to record events without worrying about other
     users from writing over their data.

   - New seq_buf_hex_dump() that lets users use the hex_dump() in their
     seq_buf usage.

   - Notifications now added to tracing_max_latency to allow user space
     to know when a new max latency is hit by one of the latency
     tracers.

   - Wider spread use of generic compare operations for use of bsearch
     and friends.

   - More synthetic event fields may be defined (32 up from 16)

   - Use of xarray for architectures with sparse system calls, for the
     system call trace events.

  This along with small clean ups and fixes"

* tag 'trace-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (51 commits)
  tracing: Enable syscall optimization for MIPS
  tracing: Use xarray for syscall trace events
  tracing: Sample module to demonstrate kernel access to Ftrace instances.
  tracing: Adding new functions for kernel access to Ftrace instances
  tracing: Fix Kconfig indentation
  ring-buffer: Fix typos in function ring_buffer_producer
  ftrace: Use BIT() macro
  ftrace: Return ENOTSUPP when DYNAMIC_FTRACE_WITH_DIRECT_CALLS is not configured
  ftrace: Rename ftrace_graph_stub to ftrace_stub_graph
  ftrace: Add a helper function to modify_ftrace_direct() to allow arch optimization
  ftrace: Add helper find_direct_entry() to consolidate code
  ftrace: Add another check for match in register_ftrace_direct()
  ftrace: Fix accounting bug with direct->count in register_ftrace_direct()
  ftrace/selftests: Fix spelling mistake "wakeing" -> "waking"
  tracing: Increase SYNTH_FIELDS_MAX for synthetic_events
  ftrace/samples: Add a sample module that implements modify_ftrace_direct()
  ftrace: Add modify_ftrace_direct()
  tracing: Add missing "inline" in stub function of latency_fsnotify()
  tracing: Remove stray tab in TRACE_EVAL_MAP_FILE's help text
  tracing: Use seq_buf_hex_dump() to dump buffers
  ...

Pull Microblaze updates from Michal Simek:

 - extend DTB space

 - defconfig update

 - clean up rescheduling logic

 - enable SPARSE_IRQ

* tag 'microblaze-v5.5-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Increase max dtb size to 64K from 32K
  microblaze: Enable SPARSE_IRQ
  microblaze: defconfig: Enable devtmps and tmpfs
  microblaze: entry: Remove unneeded need_resched() loop

Pull RISC-V updates from Paul Walmsley:
 "New features:
   - SECCOMP support
   - nommu support
   - SBI-less system support
   - M-Mode support
   - TLB flush optimizations

  Other improvements:
   - Pass the complete RISC-V ISA string supported by the CPU cores to
     userspace, rather than redacting parts of it in the kernel
   - Add platform DMA IP block data to the HiFive Unleashed board DT
     file
   - Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image
     compression formats, in line with other architectures

  Cleanups:
   - Remove unnecessary PTE_PARENT_SIZE macro
   - Standardize include guard naming across arch/riscv"

* tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits)
  riscv: provide a flat image loader
  riscv: add nommu support
  riscv: clear the instruction cache and all registers when booting
  riscv: read the hart ID from mhartid on boot
  riscv: provide native clint access for M-mode
  riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00
  riscv: add support for MMIO access to the timer registers
  riscv: implement remote sfence.i using IPIs
  riscv: cleanup the default power off implementation
  riscv: poison SBI calls for M-mode
  riscv: don't allow selecting SBI based drivers for M-mode
  RISC-V: Add multiple compression image format.
  riscv: clean up the macro format in each header file
  riscv: Use PMD_SIZE to replace PTE_PARENT_SIZE
  riscv: abstract out CSR names for supervisor vs machine mode
  riscv: separate MMIO functions into their own header file
  riscv: enter WFI in default_power_off() if SBI does not shutdown
  RISC-V: Issue a tlb page flush if possible
  RISC-V: Issue a local tlbflush if possible.
  RISC-V: Do not invoke SBI call if cpumask is empty
  ...

This patch corrects the SPDX License Identifier style in
header files related to drivers for USB Network devices.
This patch gives an explicit block comment to the
SPDX License Identifier.

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch corrects the SPDX License Identifier style in
header files related to PHY Layer for Ethernet drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used). This patch also gives an explicit
block comment to the SPDX License Identifier.

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull powerpc Spectre-RSB fixes from Michael Ellerman:
 "We failed to activate the mitigation for Spectre-RSB (Return Stack
  Buffer, aka. ret2spec) on context switch, on CPUs prior to Power9
  DD2.3.

  That allows a process to poison the RSB (called Link Stack on Power
  CPUs) and possibly misdirect speculative execution of another process.
  If the victim process can be induced to execute a leak gadget then it
  may be possible to extract information from the victim via a side
  channel.

  The fix is to correctly activate the link stack flush mitigation on
  all CPUs that have any mitigation of Spectre v2 in userspace enabled.

  There's a second commit which adds a link stack flush in the KVM guest
  exit path. A leak via that path has not been demonstrated, but we
  believe it's at least theoretically possible.

  This is the fix for CVE-2019-18660"

* tag 'powerpc-spectre-rsb' of /home/torvalds/Downloads/powerpc-CVE-2019-18660.bundle:
  KVM: PPC: Book3S HV: Flush link stack on guest exit to host kernel
  powerpc/book3s64: Fix link stack flush on context switch

Commit 6570bc79 ("net: core: use listified Rx for GRO_NORMAL in
napi_gro_receive()") has applied batched GRO_NORMAL packets processing
to all napi_gro_receive() users, including mac80211-based drivers.

However, this change has led to a regression in iwlwifi driver [1][2] as
it is required for NAPI users to call napi_complete_done() or
napi_complete() and the end of every polling iteration, whilst iwlwifi
doesn't use NAPI scheduling at all and just calls napi_gro_flush().
In that particular case, packets which have not been already flushed
from napi->rx_list stall in it until at least next Rx cycle.

Fix this by adding a manual flushing of the list to iwlwifi driver right
before napi_gro_flush() call to mimic napi_complete() logics.

I prefer to open-code gro_normal_list() rather than exporting it for 2
reasons:
* to prevent from using it and napi_gro_flush() in any new drivers,
  as it is the *really* bad way to use NAPI that should be avoided;
* to keep gro_normal_list() static and don't lose any CC optimizations.

I also don't add the "Fixes:" tag as the mentioned commit was only a
trigger that only exposed an improper usage of NAPI in this particular
driver.

[1] https://lore.kernel.org/netdev/PSXP216MB04388962C411CD0B17A86F47804A0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM
[2] https://bugzilla.kernel.org/show_bug.cgi?id=205647Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Tested-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.5-rc1

  There's a few minor cleanups and fixes in here, but the majority of
  the patches in here fall into two buckets:

   - debugfs api cleanups and fixes

   - driver core device link support for boot dependancy issues

  The debugfs api cleanups are working to slowly refactor the debugfs
  apis so that it is even harder to use incorrectly. That work has been
  happening for the past few kernel releases and will continue over
  time, it's a long-term project/goal

  The driver core device link support missed 5.4 by just a bit, so it's
  been sitting and baking for many months now. It's from Saravana Kannan
  to help resolve the problems that DT-based systems have at boot time
  with dependancy graphs and kernel modules. Turns out that no one has
  actually tried to build a generic arm64 kernel with loads of modules
  and have it "just work" for a variety of platforms (like a distro
  kernel). The big problem turned out to be a lack of dependency
  information between different areas of DT entries, and the work here
  resolves that problem and now allows devices to boot properly, and
  quicker than a monolith kernel.

  All of these patches have been in linux-next for a long time with no
  reported issues"

* tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits)
  tracing: Remove unnecessary DEBUG_FS dependency
  of: property: Add device link support for interrupt-parent, dmas and -gpio(s)
  debugfs: Fix !DEBUG_FS debugfs_create_automount
  of: property: Add device link support for "iommu-map"
  of: property: Fix the semantics of of_is_ancestor_of()
  i2c: of: Populate fwnode in of_i2c_get_board_info()
  drivers: base: Fix Kconfig indentation
  firmware_loader: Fix labels with comma for builtin firmware
  driver core: Allow device link operations inside sync_state()
  driver core: platform: Declare ret variable only once
  cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h>
  crypto: hisilicon: no need to check return value of debugfs_create functions
  driver core: platform: use the correct callback type for bus_find_device
  firmware_class: make firmware caching configurable
  driver core: Clarify documentation for fwnode_operations.add_links()
  mailbox: tegra: Fix superfluous IRQ error message
  net: caif: Fix debugfs on 64-bit platforms
  mac80211: Use debugfs_create_xul() helper
  media: c8sectpfe: no need to check return value of debugfs_create functions
  of: property: Add device link support for iommus, mboxes and io-channels
  ...

Pull staging / iio updates from Greg KH:
 "Here is the big staging and iio set of patches for the 5.5-rc1
  release.

  It's the usual huge collection of cleanup patches all over the
  drivers/staging/ area, along with a new staging driver, and a bunch of
  new IIO drivers as well.

  Full details are in the shortlog, but all of these have been in
  linux-next for a long time with no reported issues"

* tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (548 commits)
  staging: vchiq: Have vchiq_dump_* functions return an error code
  staging: vchiq: Refactor indentation in vchiq_dump_* functions
  staging: fwserial: Fix Kconfig indentation (seven spaces)
  staging: vchiq_dump: Replace min with min_t
  staging: vchiq: Fix block comment format in vchiq_dump()
  staging: octeon: indent with tabs instead of spaces
  staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error
  staging: most: core: remove sysfs attr remove_link
  staging: vc04: Fix Kconfig indentation
  staging: pi433: Fix Kconfig indentation
  staging: nvec: Fix Kconfig indentation
  staging: most: Fix Kconfig indentation
  staging: fwserial: Fix Kconfig indentation
  staging: fbtft: Fix Kconfig indentation
  fbtft: Drop OF dependency
  fbtft: Make use of device property API
  fbtft: Drop useless #ifdef CONFIG_OF and dead code
  fbtft: Describe function parameters in kernel-doc
  fbtft: Make sure string is NULL terminated
  staging: rtl8723bs: remove set but not used variable 'change', 'pos'
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc and other driver patches for 5.5-rc1

  Loads of different things in here, this feels like the catch-all of
  driver subsystems these days. Full details are in the shortlog, but
  nothing major overall, just lots of driver updates and additions.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (198 commits)
  char: Fix Kconfig indentation, continued
  habanalabs: add more protection of device during reset
  habanalabs: flush EQ workers in hard reset
  habanalabs: make the reset code more consistent
  habanalabs: expose reset counters via existing INFO IOCTL
  habanalabs: make code more concise
  habanalabs: use defines for F/W files
  habanalabs: remove prints on successful device initialization
  habanalabs: remove unnecessary checks
  habanalabs: invalidate MMU cache only once
  habanalabs: skip VA block list update in reset flow
  habanalabs: optimize MMU unmap
  habanalabs: prevent read/write from/to the device during hard reset
  habanalabs: split MMU properties to PCI/DRAM
  habanalabs: re-factor MMU masks and documentation
  habanalabs: type specific MMU cache invalidation
  habanalabs: re-factor memory module code
  habanalabs: export uapi defines to user-space
  habanalabs: don't print error when queues are full
  habanalabs: increase max jobs number to 512
  ...

Yangbo Lu says:

====================
net: mscc: ocelot: fix potential issues accessing skbs list

Fix two prtential issues accessing skbs list.
- Break the matching loop when find the matching skb to avoid
  consuming more skbs incorrectly. The timestamp ID is only
  from 0 to 3 while the FIFO supports 128 timestamps at most.
- Convert to use skb queue instead of the list of skbs to provide
  protect with lock.

Changes for v2:
	- Split into two patches.
	- Converted to use skb queue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>