Skip to content

L
linux
Switch branch/tag
  1. 12 Dec, 2014 4 commits
    • sukadev@linux.vnet.ibm.com's avatar
      powerpc/perf/hv-24x7: Use per-cpu page buffer · f34b6c72
      sukadev@linux.vnet.ibm.com authored 
      The 24x7 counters are continuously running and not updated on an
interrupt. So we record the event counts when stopping the event or
deleting it.

But to "read" a single counter in 24x7, we allocate a page and pass it
into the hypervisor (The HV returns the page full of counters from which
we extract the specific counter for this event).

We allocate a page using GFP_USER and when deleting the event, we end up
with the following warning because we are blocking in interrupt context.

  [  698.641709] BUG: scheduling while atomic: swapper/0/0/0x10010000

We could use GFP_ATOMIC but that could result in failures. Pre-allocate
a buffer so we don't have to allocate in interrupt context. Further as
Michael Ellerman suggested, use Per-CPU buffer so we only need to
allocate once per CPU.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      f34b6c72
    • Ian Munsie's avatar
      cxl: Unmap MMIO regions when detaching a context · b123429e
      Ian Munsie authored 
      If we need to force detach a context (e.g. due to EEH or simply force
unbinding the driver) we should prevent the userspace contexts from
being able to access the Problem State Area MMIO region further, which
they may have mapped with mmap().

This patch unmaps any mapped MMIO regions when detaching a userspace
context.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      b123429e
    • Ian Munsie's avatar
      cxl: Add timeout to process element commands · a98e6e9f
      Ian Munsie authored 
      In the event that something goes wrong in the hardware and it is unable
to complete a process element comment we would end up polling forever,
effectively making the associated process unkillable.

This patch adds a timeout to the process element command code path, so
that we will give up if the hardware does not respond in a reasonable
time.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      a98e6e9f
    • Ian Munsie's avatar
      cxl: Change contexts_lock to a mutex to fix sleep while atomic bug · ee41d11d
      Ian Munsie authored 
      We had a known sleep while atomic bug if a CXL device was forcefully
unbound while it was in use. This could occur as a result of EEH, or
manually induced with something like this while the device was in use:

echo 0000:01:00.0 > /sys/bus/pci/drivers/cxl-pci/unbind

The issue was that in this code path we iterated over each context and
forcefully detached it with the contexts_lock spin lock held, however
the detach also needed to take the spu_mutex, and call schedule.

This patch changes the contexts_lock to a mutex so that we are not in
atomic context while doing the detach, thereby avoiding the sleep while
atomic.

Also delete the related TODO comment, which suggested an alternate
solution which turned out to not be workable.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      ee41d11d
  3. 09 Dec, 2014 1 commit
    • Anton Blanchard's avatar
      powerpc: Secondary CPUs must set cpu_callin_map after setting active and online · 7c5c92ed
      Anton Blanchard authored 
      I have a busy ppc64le KVM box where guests sometimes hit the infamous
"kernel BUG at kernel/smpboot.c:134!" issue during boot:

  BUG_ON(td->cpu != smp_processor_id());

Basically a per CPU hotplug thread scheduled on the wrong CPU. The oops
output confirms it:

  CPU: 0
  Comm: watchdog/130

The problem is that we aren't ensuring the CPU active and online bits are set
before allowing the master to continue on. The master unparks the secondary
CPUs kthreads and the scheduler looks for a CPU to run on. It calls
select_task_rq and realises the suggested CPU is not in the cpus_allowed
mask. It then ends up in select_fallback_rq, and since the active and
online bits aren't set we choose some other CPU to run on.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      7c5c92ed
  5. 08 Dec, 2014 1 commit
    • Paul Mackerras's avatar
      powerpc/powernv: Return to cpu offline loop when finished in KVM guest · 56548fc0
      Paul Mackerras authored 
      When a secondary hardware thread has finished running a KVM guest, we
currently put that thread into nap mode using a nap instruction in
the KVM code.  This changes the code so that instead of doing a nap
instruction directly, we instead cause the call to power7_nap() that
put the thread into nap mode to return.  The reason for doing this is
to avoid having the KVM code having to know what low-power mode to
put the thread into.

In the case of a secondary thread used to run a KVM guest, the thread
will be offline from the point of view of the host kernel, and the
relevant power7_nap() call is the one in pnv_smp_cpu_disable().
In this case we don't want to clear pending IPIs in the offline loop
in that function, since that might cause us to miss the wakeup for
the next time the thread needs to run a guest.  To tell whether or
not to clear the interrupt, we use the SRR1 value returned from
power7_nap(), and check if it indicates an external interrupt.  We
arrange that the return from power7_nap() when we have finished running
a guest returns 0, so pending interrupts don't get flushed in that
case.

Note that it is important a secondary thread that has finished
executing in the guest, or that didn't have a guest to run, should
not return to power7_nap's caller while the kvm_hstate.hwthread_req
flag in the PACA is non-zero, because the return from power7_nap
will reenable the MMU, and the MMU might still be in guest context.
In this situation we spin at low priority in real mode waiting for
hwthread_req to become zero.
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      56548fc0
  7. 05 Dec, 2014 2 commits
    • Mahesh Salgaonkar's avatar
      powerpc/book3s: Fix partial invalidation of TLBs in MCE code. · 682e77c8
      Mahesh Salgaonkar authored 
      The existing MCE code calls flush_tlb hook with IS=0 (single page) resulting
in partial invalidation of TLBs which is not right. This patch fixes
that by passing IS=0xc00 to invalidate whole TLB for successful recovery
from TLB and ERAT errors.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      682e77c8
    • Aneesh Kumar K.V's avatar
      powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault · aefa5688
      Aneesh Kumar K.V authored 
      upatepp can get called for a nohpte fault when we find from the linux
page table that the translation was hashed before. In that case
we are sure that there is no existing translation, hence we could
avoid doing tlbie.

We could possibly race with a parallel fault filling the TLB. But
that should be ok because updatepp is only ever relaxing permissions.
We also look at linux pte permission bits when filling hash pte
permission bits. We also hold the linux pte busy bits while
inserting/updating a hashpte entry, hence a paralle update of
linux pte is not possible. On the other hand mprotect involves
ptep_modify_prot_start which cause a hpte invalidate and not updatepp.

Performance number:
We use randbox_access_bench written by Anton.

Kernel with THP disabled and smaller hash page table size.

    86.60%  random_access_b  [kernel.kallsyms]                [k] .native_hpte_updatepp
     2.10%  random_access_b  random_access_bench              [.] doit
     1.99%  random_access_b  [kernel.kallsyms]                [k] .do_raw_spin_lock
     1.85%  random_access_b  [kernel.kallsyms]                [k] .native_hpte_insert
     1.26%  random_access_b  [kernel.kallsyms]                [k] .native_flush_hash_range
     1.18%  random_access_b  [kernel.kallsyms]                [k] .__delay
     0.69%  random_access_b  [kernel.kallsyms]                [k] .native_hpte_remove
     0.37%  random_access_b  [kernel.kallsyms]                [k] .clear_user_page
     0.34%  random_access_b  [kernel.kallsyms]                [k] .__hash_page_64K
     0.32%  random_access_b  [kernel.kallsyms]                [k] fast_exception_return
     0.30%  random_access_b  [kernel.kallsyms]                [k] .hash_page_mm

With Fix:

    27.54%  random_access_b  random_access_bench              [.] doit
    22.90%  random_access_b  [kernel.kallsyms]                [k] .native_hpte_insert
     5.76%  random_access_b  [kernel.kallsyms]                [k] .native_hpte_remove
     5.20%  random_access_b  [kernel.kallsyms]                [k] fast_exception_return
     5.12%  random_access_b  [kernel.kallsyms]                [k] .__hash_page_64K
     4.80%  random_access_b  [kernel.kallsyms]                [k] .hash_page_mm
     3.31%  random_access_b  [kernel.kallsyms]                [k] data_access_common
     1.84%  random_access_b  [kernel.kallsyms]                [k] .trace_hardirqs_on_caller
Signed-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      aefa5688
  9. 02 Dec, 2014 14 commits
  11. 19 Nov, 2014 2 commits
    • Michael Ellerman's avatar
      powerpc: Remove more traces of bootmem · e39f223f
      Michael Ellerman authored 
      Although we are now selecting NO_BOOTMEM, we still have some traces of
bootmem lying around. That is because even with NO_BOOTMEM there is
still a shim that converts bootmem calls into memblock calls, but
ultimately we want to remove all traces of bootmem.

Most of the patch is conversions from alloc_bootmem() to
memblock_virt_alloc(). In general a call such as:

  p = (struct foo *)alloc_bootmem(x);

Becomes:

  p = memblock_virt_alloc(x, 0);

We don't need the cast because memblock_virt_alloc() returns a void *.
The alignment value of zero tells memblock to use the default alignment,
which is SMP_CACHE_BYTES, the same value alloc_bootmem() uses.

We remove a number of NULL checks on the result of
memblock_virt_alloc(). That is because memblock_virt_alloc() will panic
if it can't allocate, in exactly the same way as alloc_bootmem(), so the
NULL checks are and always have been redundant.

The memory returned by memblock_virt_alloc() is already zeroed, so we
remove several memsets of the result of memblock_virt_alloc().

Finally we convert a few uses of __alloc_bootmem(x, y, MAX_DMA_ADDRESS)
to just plain memblock_virt_alloc(). We don't use memblock_alloc_base()
because MAX_DMA_ADDRESS is ~0ul on powerpc, so limiting the allocation
to that is pointless, 16XB ought to be enough for anyone.
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      e39f223f
    • Li Zhong's avatar
      powerpc/pseries: Initialise nvram_pstore_info's buf_lock · a49ab6ee
      Li Zhong authored 
      nvram_pstore_info's buf_lock is not initialized before registering,
which is clearly incorrect.

It causes some strange behavior when trying to obtain the lock during
kdump process.

On a UP configuration, the console stopped for a couple of seconds, then
"lockup suspected" warning printed out, but then it continued to run.

So try lock fails, and lockup reported, but then arch_spin_lock()
passes.
Signed-off-by: default avatarLi Zhong <zhong@linux.vnet.ibm.com>
[mpe: Edited changelog]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      a49ab6ee
  13. 18 Nov, 2014 4 commits
    • Michael Ellerman's avatar
      Merge remote-tracking branch 'scottwood/next' into next · 35891d40
      Michael Ellerman authored 
      Scott says:

"Highlights include a bunch of 8xx optimizations, device tree bindings
for Freescale BMan, QMan, and FMan datapath components, misc device tree
updates, and inbound rio window support."
      35891d40
    • Michael Neuling's avatar
      cxl: Name interrupts in /proc/interrupt · 80fa93fc
      Michael Neuling authored 
      Currently all interrupts generated by cxl are named "cxl".  This is not very
informative as we can't distinguish between cards, AFUs, error interrupts, user
contexts and user interrupts numbers.  Being able to distinguish them is useful
for setting affinity.

This patch gives each of these names in /proc/interrupts.

A two card CAPI system, with afu0.0 having 2 active contexts each with 4 user
IRQs each, will now look like this:

    % grep cxl /proc/interrupts
    444:          0  OPAL ICS 141312 Level     cxl-card1-err
    445:          0  OPAL ICS 141313 Level     cxl-afu1.0-err
    446:          0  OPAL ICS 141314 Level     cxl-afu1.0
    462:          0  OPAL ICS 2052 Level     cxl-afu0.0-pe0-1
    463:      75517  OPAL ICS 2053 Level     cxl-afu0.0-pe0-2
    468:          0  OPAL ICS 2054 Level     cxl-afu0.0-pe0-3
    469:          0  OPAL ICS 2055 Level     cxl-afu0.0-pe0-4
    470:          0  OPAL ICS 2056 Level     cxl-afu0.0-pe1-1
    471:      75506  OPAL ICS 2057 Level     cxl-afu0.0-pe1-2
    472:          0  OPAL ICS 2058 Level     cxl-afu0.0-pe1-3
    473:          0  OPAL ICS 2059 Level     cxl-afu0.0-pe1-4
    502:       1066  OPAL ICS 2050 Level     cxl-afu0.0
    514:          0  OPAL ICS 2048 Level     cxl-card0-err
    515:          0  OPAL ICS 2049 Level     cxl-afu0.0-err
Signed-off-by: default avatarMichael Neuling <mikey@neuling.org>
Signed-off-by: default avatarIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      80fa93fc
    • Ian Munsie's avatar
      cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning · bc78b05b
      Ian Munsie authored 
      If an AFU has a hardware bug that causes it to acknowledge a context
terminate or remove while that context has outstanding transactions, it
is possible for the kernel to receive an interrupt for that context
after we have removed it from the context list.

The kernel will not be able to demultiplex the interrupt (or worse - if
we have already reallocated the process handle we could mis-attribute it
to the new context), and printed a big scary warning.

It did not acknowledge the interrupt, which would effectively halt
further translation fault processing on the PSL.

This patch makes the warning clearer about the likely cause of the issue
(i.e. hardware bug) to make it obvious to future AFU designers of what
needs to be fixed. It also prints out the process handle which can then
be matched up with hardware and software traces for debugging.

It also acknowledges the interrupt to the PSL with either an address
error or acknowledge, so that the PSL can continue with other
translations.
Signed-off-by: default avatarIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      bc78b05b
    • Prabhakar Kushwaha's avatar
      powerpc/config: Enable memory driver · 76f3e292
      Prabhakar Kushwaha authored 
      As Freescale IFC controller has been moved to driver to driver/memory.

So enable memory driver in powerpc config
Signed-off-by: default avatarPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
      76f3e292
  15. 17 Nov, 2014 2 commits
    • Neelesh Gupta's avatar
      rtc/tpo: Driver to support rtc and wakeup on PowerNV platform · 16b1d26e
      Neelesh Gupta authored 
      The patch implements the OPAL rtc driver that binds with the rtc
driver subsystem. The driver uses the platform device infrastructure
to probe the rtc device and register it to rtc class framework. The
'wakeup' is supported depending upon the property 'has-tpo' present
in the OF node. It provides a way to load the generic rtc driver in
in the absence of an OPAL driver.

The patch also moves the existing OPAL rtc get/set time interfaces to the
new driver and exposes the necessary OPAL calls using EXPORT_SYMBOL_GPL.

Test results:
-------------
Host:
[root@tul169p1 ~]# ls -l /sys/class/rtc/
total 0
lrwxrwxrwx 1 root root 0 Oct 14 03:07 rtc0 -> ../../devices/opal-rtc/rtc/rtc0
[root@tul169p1 ~]# cat /sys/devices/opal-rtc/rtc/rtc0/time
08:10:07
[root@tul169p1 ~]# echo `date '+%s' -d '+ 2 minutes'` > /sys/class/rtc/rtc0/wakealarm
[root@tul169p1 ~]# cat /sys/class/rtc/rtc0/wakealarm
1413274345
[root@tul169p1 ~]#

FSP:
$ smgr mfgState
standby
$ rtim timeofday

System time is valid: 2014/10/14 08:12:04.225115

$ smgr mfgState
ipling
$

CC: devicetree@vger.kernel.org
CC: tglx@linutronix.de
CC: rtc-linux@googlegroups.com
CC: a.zummo@towertech.it
Signed-off-by: default avatarNeelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      16b1d26e
    • Vineeth Vijayan's avatar
      powerpc: Use generic PIE randomization · 59994fb0
      Vineeth Vijayan authored 
      Back in 2009 we merged 501cb16d "Randomise PIEs", which added support for
randomizing PIE (Position Independent Executable) binaries.

That commit added randomize_et_dyn(), which correctly randomized the addresses,
but failed to honor PF_RANDOMIZE. That means it was not possible to disable PIE
randomization via the personality flag, or /proc/sys/kernel/randomize_va_space.

Since then there has been generic support for PIE randomization added to
binfmt_elf.c, selectable via ARCH_BINFMT_ELF_RANDOMIZE_PIE.

Enabling that allows us to drop randomize_et_dyn(), which means we start
honoring PF_RANDOMIZE correctly.

It also causes a fairly major change to how we layout PIE binaries.

Currently we will place the binary at 512MB-520MB for 32 bit binaries, or
512MB-1.5GB for 64 bit binaries, eg:

    $ cat /proc/$$/maps
    4e550000-4e580000 r-xp 00000000 08:02 129813       /bin/dash
    4e580000-4e590000 rw-p 00020000 08:02 129813       /bin/dash
    10014110000-10014140000 rw-p 00000000 00:00 0      [heap]
    3fffaa3f0000-3fffaa5a0000 r-xp 00000000 08:02 921  /lib/powerpc64le-linux-gnu/libc-2.19.so
    3fffaa5a0000-3fffaa5b0000 rw-p 001a0000 08:02 921  /lib/powerpc64le-linux-gnu/libc-2.19.so
    3fffaa5c0000-3fffaa5d0000 rw-p 00000000 00:00 0
    3fffaa5d0000-3fffaa5f0000 r-xp 00000000 00:00 0    [vdso]
    3fffaa5f0000-3fffaa620000 r-xp 00000000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so
    3fffaa620000-3fffaa630000 rw-p 00020000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so
    3ffffc340000-3ffffc370000 rw-p 00000000 00:00 0    [stack]

With this commit applied we don't do any special randomisation for the binary,
and instead rely on mmap randomisation. This means the binary ends up at high
addresses, eg:

    $ cat /proc/$$/maps
    3fff99820000-3fff999d0000 r-xp 00000000 08:02 921    /lib/powerpc64le-linux-gnu/libc-2.19.so
    3fff999d0000-3fff999e0000 rw-p 001a0000 08:02 921    /lib/powerpc64le-linux-gnu/libc-2.19.so
    3fff999f0000-3fff99a00000 rw-p 00000000 00:00 0
    3fff99a00000-3fff99a20000 r-xp 00000000 00:00 0      [vdso]
    3fff99a20000-3fff99a50000 r-xp 00000000 08:02 1246   /lib/powerpc64le-linux-gnu/ld-2.19.so
    3fff99a50000-3fff99a60000 rw-p 00020000 08:02 1246   /lib/powerpc64le-linux-gnu/ld-2.19.so
    3fff99a60000-3fff99a90000 r-xp 00000000 08:02 129813 /bin/dash
    3fff99a90000-3fff99aa0000 rw-p 00020000 08:02 129813 /bin/dash
    3fffc3de0000-3fffc3e10000 rw-p 00000000 00:00 0      [stack]
    3fffc55e0000-3fffc5610000 rw-p 00000000 00:00 0      [heap]

Although this should be OK, it's possible it might break badly written
binaries that make assumptions about the address space layout.
Signed-off-by: default avatarVineeth Vijayan <vvijayan@mvista.com>
[mpe: Rewrite changelog]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      59994fb0
  17. 14 Nov, 2014 10 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7