- 20 May, 2017 38 commits
-
-
Ondrej Kozina authored
commit c82feeec upstream. The message "key wipe" used to wipe real key stored in crypto layer by rewriting it with zeroes. Since commit 28856a9e ("crypto: xts - consolidate sanity check for keys") this no longer works in FIPS mode for XTS. While running in FIPS mode the crypto key part has to differ from the tweak key. Fixes: 28856a9e ("crypto: xts - consolidate sanity check for keys") Signed-off-by:
Ondrej Kozina <okozina@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gary R Hook authored
commit 6263b51e upstream. The CCP has the ability to perform several operations simultaneously, but only one interrupt. When implemented as a PCI device and using MSI-X/MSI interrupts, use a tasklet model to service interrupts. By disabling and enabling interrupts from the CCP, coupled with the queuing that tasklets provide, we can ensure that all events (occurring on the device) are recognized and serviced. This change fixes a problem wherein 2 or more busy queues can cause notification bits to change state while a (CCP) interrupt is being serviced, but after the queue state has been evaluated. This results in the event being 'lost' and the queue hanging, waiting to be serviced. Since the status bits are never fully de-asserted, the CCP never generates another interrupt (all bits zero -> one or more bits one), and no further CCP operations will be executed. Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Gary R Hook authored
commit 7b537b24 upstream. The CCP has the ability to perform several operations simultaneously, but only one interrupt. When implemented as a PCI device and using MSI-X/MSI interrupts, use a tasklet model to service interrupts. By disabling and enabling interrupts from the CCP, coupled with the queuing that tasklets provide, we can ensure that all events (occurring on the device) are recognized and serviced. This change fixes a problem wherein 2 or more busy queues can cause notification bits to change state while a (CCP) interrupt is being serviced, but after the queue state has been evaluated. This results in the event being 'lost' and the queue hanging, waiting to be serviced. Since the status bits are never fully de-asserted, the CCP never generates another interrupt (all bits zero -> one or more bits one), and no further CCP operations will be executed. Signed-off-by:
-
Gary R Hook authored
commit 116591fe upstream. Ensure that we disable interrupts first when shutting down the driver. Signed-off-by:
Gary R Hook <ghook@amd.com> Signed-off-by:
-
Gary R Hook authored
commit 56467cb1 upstream. Each CCP queue can product interrupts for 4 conditions: operation complete, queue empty, error, and queue stopped. This driver only works with completion and error events. Signed-off-by:
-
Stephan Mueller authored
commit 2a2a251f upstream. Some cipher implementations will crash if you try to use them without calling setkey first. This patch adds a check so that the accept(2) call will fail with -ENOKEY if setkey hasn't been done on the socket yet. Fixes: 400c40cf ("crypto: algif - add AEAD support") Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 42d5c176 upstream. Driver is capable of handling only one request at a time and it stores it in its state container struct s5p_aes_dev. This stored request must be protected between concurrent invocations (e.g. completing current request and scheduling new one). Combination of lock and "busy" field is used for that purpose. When "busy" field is true, the driver will not accept new request thus it will not overwrite currently handled data. However commit 28b62b14 ("crypto: s5p-sss - Fix spinlock recursion on LRW(AES)") moved some of the write to "busy" field out of a lock protected critical section. This might lead to potential race between completing current request and scheduling a new one. Effectively the request completion might try to operate on new crypto request. Fixes: 28b62b14 ("crypto: s5p-sss - Fix spinlock recursion on LRW(AES)") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Mike Snitzer authored
commit 2859323e upstream. When registering an integrity profile: if the template's interval_exp is not 0 use it, otherwise use the ilog2() of logical block size of the provided gendisk. This fixes a long-standing DM linear target bug where it cannot pass integrity data to the underlying device if its logical block size conflicts with the underlying device's logical block size. Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Marc Zyngier authored
commit c667186f upstream. Our 32bit CP14/15 handling inherited some of the ARMv7 code for handling the trapped system registers, completely missing the fact that the fields for Rt and Rt2 are now 5 bit wide, and not 4... Let's fix it, and provide an accessor for the most common Rt case. Reviewed-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Andrew Jones authored
commit 6c7a5dce upstream. Fix potential races in kvm_psci_vcpu_on() by taking the kvm->lock mutex. In general, it's a bad idea to allow more than one PSCI_CPU_ON to process the same target VCPU at the same time. One such problem that may arise is that one PSCI_CPU_ON could be resetting the target vcpu, which fills the entire sys_regs array with a temporary value including the MPIDR register, while another looks up the VCPU based on the MPIDR value, resulting in no target VCPU found. Resolves both races found with the kvm-unit-tests/arm/psci unit test. Reviewed-by:
Levente Kurusa <lkurusa@redhat.com> Suggested-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 4e335d9e upstream. This reverts commit bbd64115. I've been sitting on this revert for too long and it unfortunately missed 4.11. It's also the reason why I haven't merged ring-based dirty tracking for 4.12. Using kvm_vcpu_memslots in kvm_gfn_to_hva_cache_init and kvm_vcpu_write_guest_offset_cached means that the MSR value can now be used to access SMRAM, simply by making it point to an SMRAM physical address. This is problematic because it lets the guest OS overwrite memory that it shouldn't be able to touch. Fixes: bbd64115Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
David Hildenbrand authored
commit 28bf2888 upstream. If we already entered/are about to enter SMM, don't allow switching to INIT/SIPI_RECEIVED, otherwise the next call to kvm_apic_accept_events() will report a warning. Same applies if we are already in MP state INIT_RECEIVED and SMM is requested to be turned on. Refuse to set the VCPU events in this case. Fixes: cd7764fe ("KVM: x86: latch INITs while in system management mode") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Vince Weaver authored
commit 33b88e70 upstream. It appears as though the Broadwell-EP DRAM units share the special units quirk with Haswell-EP/KNL. Without this patch, you get really high results (a single DRAM using 20W of power). The powercap driver in drivers/powercap/intel_rapl.c already has this change. Signed-off-by:
Vince Weaver <vincent.weaver@maine.edu> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Richard Weinberger authored
commit 9abc74a2 upstream. This is broken since ever but sadly nobody noticed. Recent versions of GDB set DR_CONTROL unconditionally and UML dies due to a heap corruption. It turns out that the PTRACE_POKEUSER was copy&pasted from i386 and assumes that addresses are 4 bytes long. Fix that by using 8 as address size in the calculation. Reported-by:
jie cao <cj3054@gmail.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Ben Hutchings authored
commit 8376efd3 upstream. Commit 11e63f6d added cache flushing for unaligned writes from an iovec, covering the first and last cache line of a >= 8 byte write and the first cache line of a < 8 byte write. But an unaligned write of 2-7 bytes can still cover two cache lines, so make sure we flush both in that case. Fixes: 11e63f6d ("x86, pmem: fix broken __copy_user_nocache ...") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Andy Lutomirski authored
commit 65973dd3 upstream. i386 glibc is buggy and calls the sigaction syscall incorrectly. This is asymptomatic for normal programs, but it blows up on programs that do evil things with segmentation. The ldt_gdt self-test is an example of such an evil program. This doesn't appear to be a regression -- I think I just got lucky with the uninitialized memory that glibc threw at the kernel when I wrote the test. This hackish fix manually issues sigaction(2) syscalls to undo the damage. Without the fix, ldt_gdt_32 segfaults; with the fix, it passes for me. See: https://sourceware.org/bugzilla/show_bug.cgi?id=21269Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/aaab0f9f93c9af25396f01232608c163a760a668.1490218061.git.luto@kernel.orgSigned-off-by:
-
Ashish Kalra authored
commit d594aa02 upstream. The minimum size for a new stack (512 bytes) setup for arch/x86/boot components when the bootloader does not setup/provide a stack for the early boot components is not "enough". The setup code executing as part of early kernel startup code, uses the stack beyond 512 bytes and accidentally overwrites and corrupts part of the BSS section. This is exposed mostly in the early video setup code, where it was corrupting BSS variables like force_x, force_y, which in-turn affected kernel parameters such as screen_info (screen_info.orig_video_cols) and later caused an exception/panic in console_init(). Most recent boot loaders setup the stack for early boot components, so this stack overwriting into BSS section issue has not been exposed. Signed-off-by:
Ashish Kalra <ashish@bluestacks.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170419152015.10011-1-ashishkalra@Ashishs-MacBook-Pro.localSigned-off-by:
-
Guenter Roeck authored
commit f5cccf49 upstream. While running a bind/unbind stress test with the dwc3 usb driver on rk3399, the following crash was observed. Unable to handle kernel NULL pointer dereference at virtual address 00000218 pgd = ffffffc00165f000 [00000218] *pgd=000000000174f003, *pud=000000000174f003, *pmd=0000000001750003, *pte=00e8000001751713 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat rfcomm xt_mark fuse bridge stp llc zram btusb btrtl btbcm btintel bluetooth ip6table_filter mwifiex_pcie mwifiex cfg80211 cdc_ether usbnet r8152 mii joydev snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun CPU: 1 PID: 29814 Comm: kworker/1:1 Not tainted 4.4.52 #507 Hardware name: Google Kevin (DT) Workqueue: pm pm_runtime_work task: ffffffc0ac540000 ti: ffffffc0af4d4000 task.ti: ffffffc0af4d4000 PC is at autosuspend_check+0x74/0x174 LR is at autosuspend_check+0x70/0x174 ... Call trace: [<ffffffc00080dcc0>] autosuspend_check+0x74/0x174 [<ffffffc000810500>] usb_runtime_idle+0x20/0x40 [<ffffffc000785ae0>] __rpm_callback+0x48/0x7c [<ffffffc000786af0>] rpm_idle+0x1e8/0x498 [<ffffffc000787cdc>] pm_runtime_work+0x88/0xcc [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 Source: (gdb) l *0xffffffc00080dcc0 0xffffffc00080dcc0 is in autosuspend_check (drivers/usb/core/driver.c:1778). 1773 /* We don't need to check interfaces that are 1774 * disabled for runtime PM. Either they are unbound 1775 * or else their drivers don't support autosuspend 1776 * and so they are permanently active. 1777 */ 1778 if (intf->dev.power.disable_depth) 1779 continue; 1780 if (atomic_read(&intf->dev.power.usage_count) > 0) 1781 return -EBUSY; 1782 w |= intf->needs_remote_wakeup; Code analysis shows that intf is set to NULL in usb_disable_device() prior to setting actconfig to NULL. At the same time, usb_runtime_idle() does not lock the usb device, and neither does any of the functions in the traceback. This means that there is no protection against a race condition where usb_disable_device() is removing dev->actconfig->interface[] pointers while those are being accessed from autosuspend_check(). To solve the problem, synchronize and validate device state between autosuspend_check() and usb_disconnect(). Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
commit 245b2eec upstream. While stress testing a usb controller using a bind/unbind looop, the following error loop was observed. usb 7-1.2: new low-speed USB device number 3 using xhci-hcd usb 7-1.2: hub failed to enable device, error -108 usb 7-1-port2: cannot disable (err = -22) usb 7-1-port2: couldn't allocate usb_device usb 7-1-port2: cannot disable (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) ** 57 printk messages dropped ** hub 7-1:1.0: activate --> -22 ** 82 printk messages dropped ** hub 7-1:1.0: hub_ext_port_status failed (err = -22) This continues forever. After adding tracebacks into the code, the call sequence leading to this is found to be as follows. [<ffffffc0007fc8e0>] hub_activate+0x368/0x7b8 [<ffffffc0007fceb4>] hub_resume+0x2c/0x3c [<ffffffc00080b3b8>] usb_resume_interface.isra.6+0x128/0x158 [<ffffffc00080b5d0>] usb_suspend_both+0x1e8/0x288 [<ffffffc00080c9c4>] usb_runtime_suspend+0x3c/0x98 [<ffffffc0007820a0>] __rpm_callback+0x48/0x7c [<ffffffc00078217c>] rpm_callback+0xa8/0xd4 [<ffffffc000786234>] rpm_suspend+0x84/0x758 [<ffffffc000786ca4>] rpm_idle+0x2c8/0x498 [<ffffffc000786ed4>] __pm_runtime_idle+0x60/0xac [<ffffffc00080eba8>] usb_autopm_put_interface+0x6c/0x7c [<ffffffc000803798>] hub_event+0x10ac/0x12ac [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 kick_hub_wq() is called from hub_activate() even after failures to communicate with the hub. This results in an endless sequence of hub event -> hub activate -> wq trigger -> hub event -> ... Provide two solutions for the problem. - Only trigger the hub event queue if communication with the hub is successful. - After a suspend failure, only resume already suspended interfaces if the communication with the device is still possible. Each of the changes fixes the observed problem. Use both to improve robustness. Acked-by:
-
Alexey Brodkin authored
commit 3d615964 upstream. DWC3 driver uses of_usb_get_phy_mode() which is implemented in drivers/usb/phy/of.c and in bare minimal configuration it might not be pulled in kernel binary. In case of ARC or ARM this could be easily reproduced with "allnodefconfig" +CONFIG_USB=m +CONFIG_USB_DWC3=m. On building all ends-up with: ---------------------->8------------------ Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Building modules, stage 2. MODPOST 5 modules ERROR: "of_usb_get_phy_mode" [drivers/usb/dwc3/dwc3.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 ---------------------->8------------------ Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Felipe Balbi <balbi@kernel.org> Cc: Felix Fietkau <nbd@nbd.name> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: linux-snps-arc@lists.infradead.org Signed-off-by:
-
Romain Izard authored
commit 6e253d0f upstream. With commit bc49d1d1 ("usb: gadget: don't couple configfs to legacy gadgets"),it is possible to build a modular kernel with both built-in configfs support and modular legacy gadget drivers. But when building a kernel without modules, it is also necessary to be able to build with configfs but without any legacy gadget driver. This was a possible configuration when the USB_CONFIGFS was a part of the choice options, but not anymore. Mark the choice for legacy gadget drivers as optional restores this. Fixes: bc49d1d1 ("usb: gadget: don't couple configfs to legacy gadgets") Signed-off-by:
Romain Izard <romain.izard.pro@gmail.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 2c930e3d upstream. Add missing continue in switch. Addresses-Coverity-ID: 1248733 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by:
-
Ian Abbott authored
commit 8ec04a49 upstream. The timer expiry routine `jr3_pci_poll_dev()` checks for expiry by checking whether the absolute value of `jiffies` (stored in local variable `now`) is greater than the expected expiry time in jiffy units. This will fail when `jiffies` wraps around. Also, it seems to make sense to handle the expiry one jiffy earlier than the current test. Use `time_after_eq()` to check for expiry. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
commit 45292be0 upstream. For some reason, the driver does not consider allocation of the subdevice private data to be a fatal error when attaching the COMEDI device. It tests the subdevice private data pointer for validity at certain points, but omits some crucial tests. In particular, `jr3_pci_auto_attach()` calls `jr3_pci_alloc_spriv()` to allocate and initialize the subdevice private data, but the same function subsequently dereferences the pointer to access the `next_time_min` and `next_time_max` members without checking it first. The other missing test is in the timer expiry routine `jr3_pci_poll_dev()`, but it will crash before it gets that far. Fix the bug by returning `-ENOMEM` from `jr3_pci_auto_attach()` as soon as one of the calls to `jr3_pci_alloc_spriv()` returns `NULL`. The COMEDI core will subsequently call `jr3_pci_detach()` to clean up. Signed-off-by:
-
Sean Young authored
commit cf9ed9aa upstream. Some fields are left blank. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Aditya Shankar authored
commit 0e490657 upstream. The vif->idx value is always 0 for two interfaces. wl->vif_num = 0; loop { ... vif->idx = wl->vif_num; ... wl->vif_num = i; .... i++; ... } At present, vif->idx is assigned the value of wl->vif_num at the beginning of this block and device is initialized based on this index value. In the next iteration, wl->vif_num is still 0 as it is only updated later but gets assigned to vif->idx in the beginning. This causes problems later when we try to reference a particular interface and also while configuring the firmware. This patch moves the assignment to vif->idx from the beginning of the block to after wl->vif_num is updated with latest value of i. Fixes: commit 735bb39c ("staging: wilc1000: simplify vif[i]->ndev accesses") Signed-off-by:
Aditya Shankar <aditya.shankar@microchip.com> Signed-off-by:
-
Johan Hovold authored
commit b58f45c8 upstream. Make sure to deregister the USB driver before releasing the tty driver to avoid use-after-free in the USB disconnect callback where the tty devices are deregistered. Fixes: 61e12104 ("staging: gdm7240: adding LTE USB driver") Cc: Won Kang <wkang77@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Malcolm Priestley authored
commit 12ecd24e upstream. Since 4.9 mandated USB buffers be heap allocated this causes the driver to fail. Since there is a wide range of buffer sizes use kmemdup to create allocated buffer. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
commit 05c0cf88 upstream. Since 4.9 mandated USB buffers to be heap allocated. This causes the driver to fail. Create buffer for USB transfers. Signed-off-by:
-
Bjørn Mork authored
commit 19445816 upstream. This reverts commit 833415a3 ("cdc-wdm: fix "out-of-sync" due to missing notifications") There have been several reports of wdm_read returning unexpected EIO errors with QMI devices using the qmi_wwan driver. The reporters confirm that reverting prevents these errors. I have been unable to reproduce the bug myself, and have no explanation to offer either. But reverting is the safe choice here, given that the commit was an attempt to work around a firmware problem. Living with a firmware problem is still better than adding driver bugs. Reported-by:
Kasper Holtze <kasper@holtze.dk> Reported-by:
Aleksander Morgado <aleksander@aleksander.es> Reported-by:
Daniele Palmas <dnlplm@gmail.com> Fixes: 833415a3 ("cdc-wdm: fix "out-of-sync" due to missing notifications") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Ajay Kaher authored
USB: Proper handling of Race Condition when two USB class drivers try to call init_usb_class simultaneously commit 2f86a96b upstream. There is race condition when two USB class drivers try to call init_usb_class at the same time and leads to crash. code path: probe->usb_register_dev->init_usb_class To solve this, mutex locking has been added in init_usb_class() and destroy_usb_class(). As pointed by Alan, removed "if (usb_class)" test from destroy_usb_class() because usb_class can never be NULL there. Signed-off-by:
Ajay Kaher <ajay.kaher@samsung.com> Acked-by:
-
Marek Vasut authored
commit 31c5d192 upstream. This development kit has an FT4232 on it with a custom USB VID/PID. The FT4232 provides four UARTs, but only two are used. The UART 0 is used by the FlashPro5 programmer and UART 2 is connected to the SmartFusion2 CortexM3 SoC UART port. Note that the USB VID is registered to Actel according to Linux USB VID database, but that was acquired by Microsemi. Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Peter Chen authored
commit 6fc091fb upstream. Print correct command ring address using 'val_64'. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Roger Quadros authored
commit 69307ccb upstream. As per [1] issue #4, "The periodic EP scheduler always tries to schedule the EPs that have large intervals (interval equal to or greater than 128 microframes) into different microframes. So it maintains an internal counter and increments for each large interval EP added. When the counter is greater than 128, the scheduler rejects the new EP. So when the hub re-enumerated 128 times, it triggers this condition." This results in Bandwidth error when devices with periodic endpoints (ISO/INT) having bInterval > 7 are plugged and unplugged several times on a TUSB73x0 XHCI host. Workaround this issue by limiting the bInterval to 7 (i.e. interval to 6) for High-speed or faster periodic endpoints. [1] - http://www.ti.com/lit/er/sllz076/sllz076.pdfSigned-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Nicholas Bellinger authored
commit 197b806a upstream. While testing modification of per se_node_acl queue_depth forcing session reinstatement via lio_target_nacl_cmdsn_depth_store() -> core_tpg_set_initiator_node_queue_depth(), a hung task bug triggered when changing cmdsn_depth invoked session reinstatement while an iscsi login was already waiting for session reinstatement to complete. This can happen when an outstanding se_cmd descriptor is taking a long time to complete, and session reinstatement from iscsi login or cmdsn_depth change occurs concurrently. To address this bug, explicitly set session_fall_back_to_erl0 = 1 when forcing session reinstatement, so session reinstatement is not attempted if an active session is already being shutdown. This patch has been tested with two scenarios. The first when iscsi login is blocked waiting for iscsi session reinstatement to complete followed by queue_depth change via configfs, and second when queue_depth change via configfs us blocked followed by a iscsi login driven session reinstatement. Note this patch depends on commit d36ad77f to handle multiple sessions per se_node_acl when changing cmdsn_depth, and for pre v4.5 kernels will need to be included for stable as well. Reported-by:
Gary Guo <ghg@datera.io> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Bart Van Assche authored
commit 59ac9c07 upstream. This patch fixes zero-length READ and WRITE handling in target/FILEIO, which was broken a long time back by: Since: commit d81cb447 Author: Paolo Bonzini <pbonzini@redhat.com> Date: Mon Sep 17 16:36:11 2012 -0700 target: go through normal processing for all zero-length commands which moved zero-length READ and WRITE completion out of target-core, to doing submission into backend driver code. To address this, go ahead and invoke target_complete_cmd() for any non negative return value in fd_do_rw(). Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by:
-
Nicholas Bellinger authored
commit a71a5dc7 upstream. Following the bugfix for handling non SAM_STAT_GOOD COMPARE_AND_WRITE status during COMMIT phase in commit 9b2792c3, the same bug exists for the READ phase as well. This would manifest first as a lost SCSI response, and eventual hung task during fabric driver logout or re-login, as existing shutdown logic waited for the COMPARE_AND_WRITE se_cmd->cmd_kref to reach zero. To address this bug, compare_and_write_callback() has been changed to set post_ret = 1 and return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE as necessary to signal failure status. Reported-by:
Bill Borsari <wgb@datera.io> Cc: Bill Borsari <wgb@datera.io> Tested-by:
-
Juergen Gross authored
commit 69861e0a upstream. When booted as pv-guest the p2m list presented by the Xen is already mapped to virtual addresses. In dom0 case the hypervisor might make use of 2M- or 1G-pages for this mapping. Unfortunately while being properly aligned in virtual and machine address space, those pages might not be aligned properly in guest physical address space. So when trying to obtain the guest physical address of such a page pud_pfn() and pmd_pfn() must be avoided as those will mask away guest physical address bits not being zero in this special case. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
- 14 May, 2017 2 commits
-
-
Greg Kroah-Hartman authored
-
Ilya Dryomov authored
commit 19b7ccf8 upstream. Commit 25520d55 ("block: Inline blk_integrity in struct gendisk") introduced blk_integrity_revalidate(), which seems to assume ownership of the stable pages flag and unilaterally clears it if no blk_integrity profile is registered: if (bi->profile) disk->queue->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES; else disk->queue->backing_dev_info->capabilities &= ~BDI_CAP_STABLE_WRITES; It's called from revalidate_disk() and rescan_partitions(), making it impossible to enable stable pages for drivers that support partitions and don't use blk_integrity: while the call in revalidate_disk() can be trivially worked around (see zram, which doesn't support partitions and hence gets away with zram_revalidate_disk()), rescan_partitions() can be triggered from userspace at any time. This breaks rbd, where the ceph messenger is responsible for generating/verifying CRCs. Since blk_integrity_{un,}register() "must" be used for (un)registering the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES setting there. This way drivers that call blk_integrity_register() and use integrity infrastructure won't interfere with drivers that don't but still want stable pages. Fixes: 25520d55 ("block: Inline blk_integrity in struct gendisk") Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Tested-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
