From: Manfred Spraul <manfred@colorfullife.com>

My discussion with Ulrich had one result:

- mq_setattr can accept implementation defined flags.  Right now we have
  none, but we might add some later (e.g.  switch to CLOCK_MONOTONIC for
  mq_timed{send,receive} or something similar).  When we add flags, we
  might need the fields for additional information.  And they don't hurt.
  Therefore add four __reserved fields to mq_attr.

- fail mq_setattr if we get unknown flags - otherwise glibc can't detect
  if it's running on a future kernel that supports new features.

- use memset to initialize the mq_attr structure - theoretically we could
  leak kernel memory.

- Only set O_NONBLOCK in mq_attr, explicitely clear O_RDWR & friends.
  openposix uses getattr, attr |=O_NONBLOCK, setattr - a sane approach. 
  Without clearing O_RDWR, this fails.

I've retested all openposix conformance tests with the new patch - the two
new FAILED tests check undefined behavior.  Note that I won't have net
access until Sunday - if the message queue patch breaks something important
either ask Krzysztof or drop it.

Ulrich had another good idea for SIGEV_THREAD, but I must think about it.
It would mean less complexitiy in glibc, but more code in the kernel.  I'm
not yet convinced that it's overall better.

From: Manfred Spraul <manfred@colorfullife.com>

Make the posix message queue mountable by the user.  This replaces ipcs and
ipcrm for posix message queue: The admin can check which queues exist with ls
and remove stale queues with rm.

I'd like a final confirmation from Ulrich that our SIGEV_THREAD approach is
the right thing(tm): He's aware of the design and didn't object, but I think
he hasn't seen the final API yet.

From: Manfred Spraul <manfred@colorfullife.com>

Linux specific extension: make the message queue identifiers pollable.  It's
simple and could be useful.

From: Manfred Spraul <manfred@colorfullife.com>

Actual implementation of the posix message queues, written by Krzysztof
Benedyczak and Michal Wronski.  The complete implementation is dependant on
CONFIG_POSIX_MQUEUE.

It passed the openposix test suite with two exceptions: one mq_unlink test
was bad and tested undefined behavior.  And Linux succeeds
mq_close(open(,,,)).  The spec mandates EBADF, but we have decided to ignore
that: we would have to add a new syscall just for the right error code.

The patch intentionally doesn't use all helpers from fs/libfs for kernel-only
filesystems: step 5 allows user space mounts of the file system.



Signal changes:

The patch redefines SI_MESGQ using __SI_CODE: The generic Linux ABI uses
a negative value (i.e.  from user) for SI_MESGQ, but the kernel internal
value must be posive to pass check_kill_value.  Additionally, the patch
adds support into copy_siginfo_to_user to copy the "new" signal type to
user space.



Changes in signal code caused by POSIX message queues patch:

General & rationale:

  mqueues generated signals (only upon notification) must have si_code
  == SI_MESGQ.  In fact such a signal is send from one process which
  caused notification (== sent message to empty message queue) to
  another which requested it.  Both processes can be of course unrelated
  in terms of uids/euids.  So SI_MESGQ signals must be classified as
  SI_FROMKERNEL to pass check_kill_permissions (not need to say that
  this signals ARE from kernel).

  Signals generated by message queues notification need the same
  fields in siginfo struct's union _sifields as POSIX.1b signals and we
  can reuse its union entry.

  SI_MESGQ was previously defined to -3 in kernel and also in glibc. 
  So in userspace SI_MESGQ must be still visible as -3.

Solution:

  SI_MESGQ is defined in the same style as SI_TIMER using __SI_CODE macro.

  Details:

    Fortunately copy_siginfo_to_user copies si_code as short.  So we
    can use remaining part of int value freely.  __SI_CODE does the
    work.  SI_MESGQ is in kernel:

 		6<<16 | (-3 & 0xffff) what is > 0

    but to userspace is copied

 		(short) SI_MESGQ == -3

Actual changes:

  Changes in include/asm-generic/siginfo.h

  __SI_MESGQ added in signal.h to represent inside-kernel prefix of
  SI_MESGQ.  SI_MESGQ is redefined from -3 to __SI_CODE(__SI_MESGQ, -3)

  Except mips architecture those changes should be arch independent
  (asm-generic/siginfo.h is included in arch versions).  On mips
  SI_MESGQ is redefined to -4 in order to be compatible with IRIX.  But
  the same schema can be used.

  Change in copy_siginfo_to_user: We only add one line to order the
  same copy semantics as for _SI_RT.

  This change isn't very portable - some arch have its own
  copy_siginfo_to_user.  All those should have similar change (but
  possibly not one-line as _SI_RT case was sometimes ignored because i
  wasn't used yet, e.g.  see ia64 signal.c).

Update:
mq: only fail with invalid timespec if mq_timed{send,receive} needs to block
From: Jakub Jelinek <jakub@redhat.com>

POSIX requires EINVAL to be set if:
"The process or thread would have blocked, and the abs_timeout parameter
specified a nanoseconds field value less than zero or greater than or equal
to 1000 million."
but 2.6.5-mm3 returns -EINVAL even if the process or thread would not block
(if the queue is not empty for timedreceive or not full for timedsend).

From: Manfred Spraul <manfred@colorfullife.com>

Add -ENOSYS stubs for the posix message queue syscalls.  The API is a direct
mapping of the api from the unix spec, with two exceptions:

- mq_close() doesn't exist.  Message queue file descriptors can be closed
  with close().

- mq_notify(SIGEV_THREAD) cannot be implemented in the kernel.  The kernel
  returns a pollable file descriptor .  User space must poll (or read) this
  descriptor and call the notifier function if the file descriptor is
  signaled.

From: Manfred Spraul <manfred@colorfullife.com>

cleanup of sysv ipc as a preparation for posix message queues:

- replace !CONFIG_SYSVIPC wrappers for copy_semundo and exit_sem with
  static inline wrappers.  Now the whole ipc/util.c file is only used if
  CONFIG_SYSVIPC is set, use makefile magic instead of #ifdef.

- remove the prototypes for copy_semundo and exit_sem from kernel/fork.c

- they belong into a header file.

- create a new msgutil.c with the helper functions for message queues.

- cleanup the helper functions: run Lindent, add __user tags.

From: Neil Brown <neilb@cse.unsw.edu.au>

Addresses http://bugme.osdl.org/show_bug.cgi?id=2355

It seems that a merge_bvec_fn needs to be aware of partitioning...  who
would have thought it :-(

The following patch should fix the merge_bvec_fn for both linear and raid0.
We teach linear and raid0 about partitions in the merge_bvec_fn.

->merge_bvec_fn needs to make decisions based on the physical geometry of the
device.  For raid0, it needs to decide if adding the bvec to the bio will
make the bio span two drives.

To do this, it needs to know where the request is (what the sector number is)
in the whole device.

However when called from bio_add_page, bi_sector is the sector number
relative to the current partition, as generic_make_request hasn't been called
yet.

So raid_mergeable_bvec needs to map bio->bi_sector (which is partition
relative) to a bi_sector which is device relative, so it can perform proper
calculations about when chunk boundaries are.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

rpcsec_gss supports three security levels:

1.  authentication only: sign the header of each rpc request and response.

2. integrity: sign the header and body of each rpc request and response.

3.  privacy: sign the header and encrypt the body of each rpc request and
   response.

The first 2 are already supported on the client; this adds integrity support
on the server.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

Without this compiling auth_gss as module fails.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: Fred.  We don't do all the utf8 checking we could in the kernel, but we
do some simple checks.  Implement slightly stricter, and probably more
efficient, checking.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: NeilBrown <neilb@cse.unsw.edu.au>

From: NeilBrown <neilb@cse.unsw.edu.au>

From: Fred Isaman

From: NeilBrown <neilb@cse.unsw.edu.au>

From: NeilBrown <neilb@cse.unsw.edu.au>

It's better than oopsing.

From: Olaf Hering <olh@suse.de>

initramfs can not be used in current 2.6 kernels, the files will never be
executed because prepare_namespace doesn't care about them.  The only way to
workaround that limitation is a root=0:0 cmdline option to force rootfs as
root filesystem.  This will break further booting because rootfs is not the
final root filesystem.

This patch checks for the presence of /init which comes from the cpio archive
(and thats the only way to store files into the rootfs).  This binary/script
has to do all the work of prepare_namespace().

Teach inode.c about list_move().

From: Jan Kara <jack@ucw.cz>

Change locking rules in quota code to fix lock ordering especially wrt
journal lock.  Also some unnecessary spinlocking is removed.  The locking
changes are mainly: dqptr_sem, dqio_sem are acquired only when transaction is
already started, dqonoff_sem before a transaction is started.  This change
requires some callbacks to ext3 (also implemented in this patch) to start
transaction before the locks are acquired.

From: Matt Porter <mporter@kernel.crashing.org>

This fixes a memory leak when freeing pgds on PPC44x.

From: Anton Blanchard <anton@samba.org>

UP compile fixes

From: Anton Blanchard <anton@samba.org>

Quieten NVRAM driver

From: Joel Schopp <jschopp@austin.ibm.com>

I was looking at rtas serialization for reasons I won't go into here.
While wandering through the code I found that two functions were not
properly serialized.  phys_call_rtas and phys_call_rtas_display_status are
the functions.  After looking further they are redundant and not
used anywhere at all.

From: Anton Blanchard <anton@samba.org>

DMA API updates, in particular adding the new cache flush interfaces.

From: Anton Blanchard <anton@samba.org>

Add smt_snooze_delay cpu sysfs attribute

From: Anton Blanchard <anton@samba.org>

Oops cleanup:

- Move prototypes into system.h
- Move the debugger hooks into die, all the calls sites were calling them.
- Handle bad values passed to prregs

From: Anton Blanchard <anton@samba.org>

From: Stephen Rothwell <sfr@canb.auug.org.au>

James Bottomley is right, this was a mistake.  This patch replaces
vio_dma_mapping_error with dma_mapping_error everywhere.

[PATCH] ppc64: change the iSeries virtual device drivers to use the vio infrastructure for DMA mapping

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch changes the iSeries virtual device drivers to use the
vio infrastructure for DMA mapping instead of the PCI infrastructure.
This is a step along the way to integrating them correctly into the
driver model.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch consolidates some of the iommu DMA mapping routines.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This is just a cleanup to use enum dma_data_direction for all APIs
except the pci_dma_ ones (since they are defined generically).

Also make most of the functions in arch/ppc64/kernel/pci_iommu.c
static.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch uses enum dma_data_direction for the vio DMA api routines.
This allows us to remove some include of linux/pci.h.

Also missed some pci_dma_mapping_error uses.

From: Anton Blanchard <anton@samba.org>

Register secondary threads in NUMA init code

From: Anton Blanchard <anton@samba.org>

Add HW PMC support to oprofile

From: Anton Blanchard <anton@samba.org>

Add PMCs to sysfs.

From: Anton Blanchard <anton@samba.org>

Add some POWER5 specific optimisations:
- icache is coherent, no need to explicitly flush
- tlbie lock no longer required

From: Anton Blanchard <anton@samba.org>

Move sysfs specific stuff into sysfs.c

From: Anton Blanchard <anton@samba.org>

Update CPU features. Remove DABR feature, all cpus have it. Add MMCRA,
PMC8, SMT, COHERENT_ICACHE, LOCKLESS_TLBIE features

From: David Engebretsen <engebret@us.ibm.com>

Put SMT threads into global interrupt queue

From: Anton Blanchard <anton@samba.org>

Create xics get_irq_server and use it in enable/disable code.

From: Paul Mackerras <paulus@samba.org>

Create and use irq_offset_up/down, get_irq_desc, for_each_irq