- 25 Aug, 2017 40 commits
-
-
Joe Carnuccio authored
Calling sp->free() ensures the context-correct free routine is called. Signed-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Joe Carnuccio authored
Signed-off-by:
-
Quinn Tran authored
SFP can come in 2 formats: short range/SR and long range/LR. For LR, user the can increase the number of Buffer to Buffer credits between end points via Cavium's command line tool. By default, FW uses a lower BB Credit value optimized for SR. This patch will read the SFP for each link up event and during chip reset sequence. If the SFP type and setting are mismatch, then the chip is reset 1 time to use the appropriate setting. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
Quinn Tran authored
The Get Port Speed switch command needs the fabric port name of the remote device. Current code uses the registered WWPN. Fixes: 726b8548 ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by:
-
Quinn Tran authored
Update ha->wq max_active from 1 to default. MQ interrupts are queued up via this work queue. This allows interrupts to be process in parrallel, instead of serialized by the work queue. Signed-off-by:
-
Quinn Tran authored
Remove extra register read for each interrupt for performance improvement. Signed-off-by:
-
Quinn Tran authored
For NPIV ports, call configure_hba() so that NPIV ports can proceed to loop initialization. Signed-off-by:
Quinn Tran <quinn.tran@qlogic.com> Signed-off-by:
-
Sawan Chandak authored
If FA-WWPN feature disabled on the switch side and enabled for the adapter, then driver would update the port name with switch port name. This patch fixes issue by checking correct BIT flag to validate. Fixes: 41dc529a ("qla2xxx: Improve RSCN handling in driver") Cc: <stable@vger.kernel.org> Signed-off-by:
Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by:
-
Duane Grigsby authored
[ 1013.772926] BUG: unable to handle kernel paging request at 0000000300000020 [ 1013.772950] IP: qla24xx_els_ct_entry.isra.17+0x78/0x2a0 [qla2xxx] [ 1013.772951] PGD 0 [ 1013.772952] P4D 0 [ 1013.772952] [ 1013.772953] Oops: 0000 [#1] SMP [ 1013.772955] Modules linked in: qla2xxx(+) scsi_transport_fc nvme_fc nvme_fabrics nvme_core netconsole configfs af_packet iscsi_ibft iscsi_boot_sysfs xfs intel_rapl sb_edac libcrc32c x86_pkg_temp_thermal intel_powerclamp coretemp mgag200 kvm_intel ttm kvm drm_kms_helper ipmi_ssif irqbypass tg3 drm fb_sys_fops crct10dif_pclmul syscopyarea crc32_pclmul ghash_clmulni_intel ptp pcbc sysfillrect pps_core aesni_intel joydev aes_x86_64 sysimgblt crypto_simd iTCO_wdt libphy iTCO_vendor_support i2c_algo_bit glue_helper ipmi_si lpc_ich hpwdt ioatdma cryptd ipmi_devintf pcspkr mfd_core pcc_cpufreq ipmi_msghandler hpilo thermal dca button shpchp btrfs xor raid6_pq hid_generic usbhid sr_mod cdrom sd_mod ata_generic crc32c_intel serio_raw ata_piix ahci libahci uhci_hcd ehci_pci ehci_hcd libata usbcore hpsa scsi_transport_sas [ 1013.772994] sg scsi_mod autofs4 [ 1013.772998] CPU: 0 PID: 374 Comm: systemd-journal Not tainted 4.13.0-rc1-2-default #2 [ 1013.772999] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 07/15/2012 [ 1013.773000] task: ffff88082c188380 task.stack: ffffc90004d7c000 [ 1013.773011] RIP: 0010:qla24xx_els_ct_entry.isra.17+0x78/0x2a0 [qla2xxx] [ 1013.773012] RSP: 0000:ffff88042f603d90 EFLAGS: 00010082 [ 1013.773013] RAX: ffff88039f723ac8 RBX: ffff88039f723ac8 RCX: ffff8803a2e18010 [ 1013.773014] RDX: ffff88039f723ac0 RSI: ffff88042f603dc4 RDI: ffff88041b6787c0 [ 1013.773015] RBP: ffff88042f603e00 R08: 0000000000000002 R09: 000000000000000d [ 1013.773016] R10: 0000000000000002 R11: 0000000000000000 R12: ffff8803a2e80080 [ 1013.773016] R13: ffff88041b6787c0 R14: 0000000300000000 R15: 0000000000000102 [ 1013.773018] FS: 00007fa2e0a73880(0000) GS:ffff88042f600000(0000) knlGS:0000000000000000 [ 1013.773019] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1013.773020] CR2: 0000000300000020 CR3: 000000042cd7e000 CR4: 00000000000406f0 [ 1013.773021] Call Trace: [ 1013.773022] <IRQ> [ 1013.773026] ? consume_skb+0x34/0xa0 [ 1013.773040] qla24xx_process_response_queue+0x319/0x700 [qla2xxx] [ 1013.773050] qla24xx_msix_rsp_q+0x7b/0xd0 [qla2xxx] [ 1013.773054] __handle_irq_event_percpu+0x3c/0x1b0 [ 1013.773056] handle_irq_event_percpu+0x23/0x60 [ 1013.773057] handle_irq_event+0x42/0x70 [ 1013.773059] handle_edge_irq+0x8f/0x190 [ 1013.773062] handle_irq+0x1d/0x30 [ 1013.773065] do_IRQ+0x48/0xd0 [ 1013.773067] common_interrupt+0x93/0x93 [ 1013.773068] RIP: 0033:0xed622c6e42 [ 1013.773069] RSP: 002b:00007ffee8b5c820 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff17 [ 1013.773071] RAX: 000000ed6316a3f0 RBX: 000000ed6316a840 RCX: 00000000000c4e33 [ 1013.773071] RDX: 000000ed6316a878 RSI: 000000ed6316a840 RDI: 000000ed631682d0 [ 1013.773072] RBP: 0000000000000001 R08: 0000000000000001 R09: 000000ed63179b70 [ 1013.773073] R10: 000000000005f6f8 R11: 0000000000000202 R12: 0000000000000001 [ 1013.773074] R13: 00007ffee8b5c85c R14: 000000ed6316a840 R15: 00007ffee8b5c850 [ 1013.773074] </IRQ> [ 1013.773076] Code: a9 8a 9a e0 48 8d 75 c4 48 89 da 4c 89 e1 4c 89 ef e8 54 6e fb ff 48 85 c0 48 89 c3 0f 84 0e 02 00 00 44 0f b7 48 36 4c 8b 70 58 <4d> 8b 7e 20 41 8d 41 fd 66 83 f8 0c 77 6c 0f b7 c0 ff 24 c5 88 [ 1013.773102] RIP: qla24xx_els_ct_entry.isra.17+0x78/0x2a0 [qla2xxx] RSP: ffff88042f603d90 [ 1013.773102] CR2: 0000000300000020 [ 1013.773129] ---[ end trace 532363559924f426 ]--- [ 1013.773131] Kernel panic - not syncing: Fatal exception in interrupt [ 1013.777719] Kernel Offset: disabled [ 1013.827528] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by:
Duane Grigsby <Duane.Grigsby@cavium.com> Signed-off-by:
-
Sawan Chandak authored
Driver will perform following - Set PFLG_DRIVER_REMOVING flag and do not disable PCIe error reporting during adapter shutdown. - If PCIe device count is already zero, return correct error type from PCI error interface. - When device is offline, return correct error type from PCIe error path. - If there is board disable thread active during shutdown and PCIe device count is zero then cancel scheduling board disable thread during shutdown and return. Signed-off-by:
-
Darren Trap authored
Signed-off-by:
Darren Trap <darren.trap@cavium.com> Signed-off-by:
-
Duane Grigsby authored
The driver held spinlocks during callbacks for NVME errors which resulted in a deadlock because recovery LS cmds needed the same lock. Signed-off-by:
-
himanshu.madhani@cavium.com authored
Fixes: 4b60c827 ("scsi: qla2xxx: Add fw_started flags to qpair") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michael Hernandez authored
Following error will be logged in to message file while trying to configure target with multiqueue. "Cmd 0x1f aborted with timeout since ISP Abort is pending" "qla25xx_init_queues Rsp que: 1 init failed." Fixes: 82de802a ("scsi: qla2xxx: Preparation for Target MQ.") Cc: <stable@vger.kernel.org> Signed-off-by:
Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by:
-
Joe Carnuccio authored
Fix incorrect second argument for wait_event_timeout() Fixes: c4a9b538 ("qla2xxx: Allow vref count to timeout on vport delete.") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Shivasharan S authored
Signed-off-by:
Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Shivasharan S authored
Signed-off-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
-
Shivasharan S authored
Signed-off-by:
-
Shivasharan S authored
Signed-off-by:
-
Shivasharan S authored
scsi: megaraid_sas: Return pended IOCTLs with cmd_status MFI_STAT_WRONG_STATE in case adapter is dead After a kill adapter, since the cmd_status is not set, the IOCTLs will be hung in driver resulting in application hang. Set cmd_status MFI_STAT_WRONG_STATE when completing pended IOCTLs. Signed-off-by:
-
Shivasharan S authored
Driver's local RAID map is accessed frequently. We will first try to get memory from __get_free_pages. If this fails, fall back to using vmalloc. For crash dump buffers always prefer vmalloc. Signed-off-by:
-
Shivasharan S authored
In TM code, smid_task is valid only in case of task aborts. Signed-off-by:
-
Shivasharan S authored
Signed-off-by:
-
Shivasharan S authored
Signed-off-by:
-
Shivasharan S authored
Signed-off-by:
-
Shivasharan S authored
scsi: megaraid_sas: Call megasas_complete_cmd_dpc_fusion every 1 second while there are pending commands megasas_wait_for_outstanding_fusion checks for pending commands every 1 second. But megasas_complete_cmd_dpc_fusion is only called every 5 seconds. If the commands are already completed by firmware, there is an additional delay of 5 seconds before driver will process completion for these commands. Signed-off-by:
-
Shivasharan S authored
Similar to task abort case, use synchronize_irq API in target reset case. Also, remove redundant call to megasas_complete_cmd_dpc_fusion after calling megasas_sync_irqs in task abort case. Signed-off-by:
-
Shivasharan S authored
Setting resetwaittime to 0 during a FW fault will result in driver not calling the OCR. Signed-off-by:
-
Shivasharan S authored
scsi: megaraid_sas: mismatch of allocated MFI frame size and length exposed in MFI MPT pass through command Driver allocated 256 byte MFI frames bytes but while sending MFI frame (embedded inside chain frame of MPT frame) to firmware, driver sets the length as 4k. This results in DMA read error messages during boot. Signed-off-by:
-
Gustavo A. R. Silva authored
Remove variable assignments. The value stored in local variable _rc_ is overwritten at line 2448:rc = lpfc_sli4_bsg_set_link_diag_state(phba, 0); before it can be used. Addresses-Coverity-ID: 1226935 Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Todd Poynor authored
Take f_mutex around mmap() processing to protect against races with the SG_SET_RESERVED_SIZE ioctl. Ensure the reserve buffer length remains consistent during the mapping operation, and set the "mmap called" flag to prevent further changes to the reserved buffer size as an atomic operation with the mapping. [mkp: fixed whitespace] Signed-off-by:
Todd Poynor <toddpoynor@google.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Todd Poynor authored
Commit 1bc0eb04 ("scsi: sg: protect accesses to 'reserved' page array") adds needed concurrency protection for the "reserve" buffer. Some checks that are initially made outside the lock are replicated once the lock is taken to ensure the checks and resulting decisions are made using consistent state. The check that a request with flag SG_FLAG_MMAP_IO set fits in the reserve buffer also needs to be performed again under the lock to ensure the reserve buffer length compared against matches the value in effect when the request is linked to the reserve buffer. An -ENOMEM should be returned in this case, instead of switching over to an indirect buffer as for non-MMAP_IO requests. Signed-off-by:
-
Dan Carpenter authored
The parentheses are in the wrong place so we specify the length as "sizeof(this_device->device_id) < 0" which is zero. Fixes: 988b87edd231 ("scsi: hpsa: Ignore errors for unsupported LV_DEVICE_ID VPD page") Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Arvind Yadav authored
pnp_device_id are not supposed to change at runtime. All functions working with pnp_device_id provided by <linux/pnp.h> work with const pnp_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
weiping zhang authored
If scsi_host_template->host_reset is NULL and the user requests an adapter reset through echo adapter > /sys/class/scsi_host/hostx/host_reset -EINVAL will be returned even though the "adapter" argument is perfectly valid. Change this so that we only return -EINVAL if the provided string is invalid. If the host does not implement a ->host_reset function we'll return -EOPNOTSUPP. [mkp: tweaked patch description] Signed-off-by:
weiping zhang <zhangweiping@didichuxing.com> Signed-off-by:
-
Hannes Reinecke authored
struct scsi_changer needs refcounting as the device might be removed while the fd is still open. [mkp: whitespace] Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Gustavo A. R. Silva authored
Refactor code in order to avoid identical code for different branches. This issue was detected with the help of Coccinelle. Signed-off-by:
-
Arvind Yadav authored
pnp_device_id are not supposed to change at runtime. All functions working with pnp_device_id provided by <linux/pnp.h> work with const pnp_device_id. So mark the non-const structs as const. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
-
Chad Dupuis authored
Because we were passing 'qedf_debug' instead of 'debug' to the MODULE_PARM_DESC() macro, modinfo listed the parameter name as 'qedf_debug' instead of it's proper name 'debug'. Correct the parameter name. Signed-off-by:
-
