- 10 Oct, 2007 40 commits
-
-
Hans Verkuil authored
When there are no more free buffers, then buffers are stolen from the predma queue. Buffers should be stolen from the head of that queue (which is where the most recently added buffers are) and all buffers belonging to a frame should be stolen. Otherwise 'half-frames' would remain in the queue, which leads to ugly playback and complete sync failure for YUV buffers. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
The CX2341X_ENC_INITIALIZE_INPUT firmware call requires careful handling, otherwise the computer can freeze or the top-third of the screen can start flickering. This patch ensures that CX2341X_ENC_INITIALIZE_INPUT is called at the right time and in the right way. In addition the stop capture handling was improved so that the last pending DMA transfer is also processed. Otherwise this would be the first data that arrived when a new capture was started which is not what you want. Signed-off-by:
-
Kazuhiko Kawakami authored
Signed-off-by:
Kazuhiko Kawakami <kazz-0@mail.goo.ne.jp> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Darren Salt authored
Working with Nova-T Stick (70001) with remote control model A415. Untested with other dib0700m/dib0700p devices. Signed-off-by:
Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Darren Salt authored
Typo fix in Nova-TD description Signed-off-by:
-
Michael Mauch authored
Repair modinfo parameter descriptions for force_pid_filter_usage and disable_rc_polling. Signed-off-by:
Michael Mauch <michael.mauch@gmx.de> Signed-off-by:
-
Alan Nisota authored
There are now 4 different versions of the GENPIX USB adapter. The newest 'Skywalker' models are fully self-contained, and need no additional hardware to be used. A very reliable DVB-S card even without using any of the alternate modulatations (which this kernel module does not currently support) The following patch adds support for all 4 versions of the genpix adapter (www.genpix-electronics.com). Signed-off-by: Alan Nisota alannisota@gmail.com Signed-off-by:
-
Trent Piepho authored
FM radio transmission use a preemphasis/deemphasis scheme to reduce high-frequency noise. The cx88 audio decoder is supposedly set to no deemphasis by the current driver. However, the "no deemphasis" setting doesn't work. On my chip, cx23883, it produces the same result as the 75 us time constant. Maybe the default settings on the cx23881 are for 50 us? Since the deemphasis time constant varies by country, allow setting it via a module parameter. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Trent Piepho authored
The first part of dvb_net_close() is just a cut&paste from dvb_generic_release(), so maybe it would be better to just call dvb_generic_release() instead? Signed-off-by:
Markus Rechberger <mrechberger@gmail.com> Acked-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Adrian Bunk authored
The Coverity checker spotted that we'd have already oops'ed if "dev" was NULL. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Trent Piepho authored
Get rid of the "CORE" prefix from cx88 printks. It was only used a few times, and it makes it look like they're coming from the kernel core or something. Fix the message, "TV tuner 60 at 0x1fe, Radio tuner -1 at 0x1fe", by adding a "cx88[0]" prefix to be consistent, and to keep people who grep their dmesg output for cx88 from missing it. Get rid of the addresses, which are always wrong. The addresses are always set to -1, but because it's an unsigned 8-bit value, the left shift converts it to the nonsense address 0x1fe. In the cx8802 driver, some cut and pasted code prefixed lines with "CORE cx88[0]:", which has been changed to "cx88[0]/2:" like the other printks from the cx8802 driver. Also fix some ugly printks in the cx8802 driver that used __FUNCTION__ for KERN_INFO and KERN_ERR messages. The changed printks in cx88-mpeg.c also needed lots of whitespace and 80-column fixes. A bunch of misc changes in cx88-dvb.c and cx88-video.c to add message levels or a consistent "cx88[?]/2" or "cx88[?]/0" prefix. Signed-off-by:
-
Trent Piepho authored
A lot of code in cx88-cards.c was only used by cx88-core.c when the core state is first allocated and initialized. Moving that task to cx88-cards makes the driver simpler and the files more self contained. - Module parameters tuner, radio, card, and latency move to cx88-cards.c - cx88_boards is made static - cx88_subids is made static and const - cx88_bcount is eliminated - cx88_idcount is eliminated - cx88_card_list() is made static - cx88_card_setup_pre_i2c() is made static - cx88_card_setup() is made static - cx88_pci_quirks() is moved from cx88-core to cx88-cards The function argument "char *name" is made const too - get_ressources() is moved from cx88-core to cx88-cards, and renamed to cx88_get_resources() - The code to allocate and initialize the core state struct and the chip is moved out of cx88-core.c:cx88_get_core() and into a new function in cx88-cards.c, cx88_core_create(). This makes both functions simpler. Signed-off-by:
-
Trent Piepho authored
The cx88 driver state stored the ID of the board type in core->board. Every time the driver need to get some information about the board configuration, it uses the board number as an index into board configuration array. This patch changes it so that the board number is in core->boardnr, and core->board is a copy of the board configuration information. This allows access to board information without the extra indirection. e.g. cx88_boards[core->board].mpeg becomes core->board.mpeg. This has a number of advantages: - The code is simpler to write. - It compiles to be smaller and faster, without needing the extra array lookup to get at the board information. - The cx88_boards array no longer needs to be exported to all cx88 modules. - The boards array can be made const - It should be possible to avoid keeping the (large) cx88_boards array around after the module is loaded. - If module parameters or eeprom info override some board configuration setting, it's not necessary to modify the boards array, which would affect all boards of the same type. Signed-off-by:
-
Trent Piepho authored
An error message for PCI resource allocation failure used the board type before it was set. Just get rid of the error message, as get_ressources() [sic] already prints one. Format that error message better, and add the pci function and subsystem information to better associate the error with what caused it. Signed-off-by:
-
Trent Piepho authored
The vmux setting is only two bits, but was taking up a whole 32 in the input description struct. By changing it to a two-bit bitfield, it can fit in what was padding space before and drop the input size by 4 bytes, from 28 to 24. This drops the board description struct, which has 9 inputs, from 280 to 244 bytes. Total driver size decreases by 2108 bytes. Signed-off-by:
-
Kay Sievers authored
The currently used "struct class_device" will be removed from the kernel. Here is a trivial patch that converts DVB to use struct device. Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
videobuf_read_stream is more efficient than videobuf_read_one Signed-off-by: -
Kumar Gala authored
Change io_st_le32() to use inline functions rather than direct inline assembly code. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Adrian Bunk authored
"extern inline" will have different semantics with gcc 4.3. Signed-off-by:
-
Michael Krufky authored
tuner-simple is the only sub-driver that uses last_div, so we can free up two bytes of memory for all other tuners, by moving this into tuner-simple's private data area. Signed-off-by:
-
Rolf Eike Beer authored
Some lines later filp->private_data is initialized to dev again. Since there are some checks that might fail in the mean time keep the later version. Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Hans Verkuil authored
Correctly attribute the origin of the driver to Kazuhiko Kawakami. It took some time to get the S-O-B line from the original tvaudio patch author, but here it is. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
When changing channels the audio has to be muted. This is done by calling CX2341X_ENC_MUTE_AUDIO and by muted the audio input. The latter is not necessary and is now removed. Signed-off-by:
-
Hans Verkuil authored
Audio muting for the tuner input was implemented by stopping the audio microcontroller and restarting it on unmute. However, it appears that this method can actually crash the audio firmware. It's rare and seems to happen with NTSC only. It has been reimplemented by setting to volume to 0. In addition, the reporting of the mute state has been improved as well: it used to be impossible to detect whether the audio was muted by the user or if it was muted due to the microcontroller trying to detect the audio standard. This is now clearly stated. Signed-off-by:
-
Hans Verkuil authored
- Split Club3D card from Yuan PG600-2, GotView PCI DVD Lite (different composite input) - Add AVerTV MCE 116 Plus (M116) card - Allow Xceive cards to be used without Xceive support Signed-off-by:
-
Hans Verkuil authored
Add support to optionally reset the IR and/or the video digitizer. Signed-off-by:
-
Hans Verkuil authored
Resetting without reloading the firmware is not enough. Sometimes the firmware is 'stuck' and needs to be reloaded. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Oleg Nesterov authored
Restore unlock of cinergyt2->wq_sem, was deleted by accident. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Steven Walter authored
With the addition of these ioctls, I'm able to watch TV with a 32-bit version of tvtime on x86_64. Signed-off-by: -
Simon Arlott authored
Since videobuf_waiton is called with intr=1, it can return -EINTR and therefore err may be non-zero. This happens when the system goes into the standby state. Without the BUG() occurring, there's no problem with standby mode while DVB is being used. Signed-off-by: -
Oliver Endriss authored
Interrupt processing fixed: First handle interrupt, then acknowledge it. Otherwise the same interrupt might occur twice. Cleaned-up i2c interrupt handler and i2c error messages. Signed-off-by:
-
Oliver Endriss authored
The calculation of frequency limits ignored tuner-specific frequency limits. Range checks and GET_INFO ioctl updated accordingly. Signed-off-by:
-
Hartmut Birr authored
The min frequencies of the DVB-C frontends are wrong. In Europe, the center frequency of the lowest channel is 50.5MHz and not 51MHz. All known cards with the stv0297/tda0002x/ves1820 frontend are able to tune to this frequency. I've changed the range to the lowest channel - 1/2 bandwidth and the highest channel + 1/2 bandwidth. For the design of the dvb driver, the frequency ranges must be part of the tuner and not of the frontend itself. The same frontend may be used for different tuners. The attached patch does only fix the ranges and not the design. Signed-off-by:
Hartmut Birr <e9hack@googlemail.com> Signed-off-by:
-
Mariusz Kozlowski authored
Looks like memset() is zeroing wrong nr of bytes. Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
-
Mariusz Kozlowski authored
Looks like memset() is zeroing wrong nr of bytes. Signed-off-by:
-
Mariusz Kozlowski authored
Looks like memset() is zeroing wrong nr of bytes. Signed-off-by:
-
