The Synaptics touchpads are now either using i2c-hid or rmi-smbus.
Warn the users if they are missing the rmi-smbus modules and have no
chance of reporting correct data.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Or the user might have the touchpad unbound from PS/2 but never picked
up by rmi-smbus.ko
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

synaptics_query_hardware() was being passed a 'struct synaptics_device_info'
in uninitialized stack memory, then not always initializing all fields.
This caused garbage to show up in certain fields, making the touchpad
unusable.

Fix by zeroing the device info, so all fields default to 0.

Fixes: 6c53694f ("Input: synaptics - split device info into a separate structure")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When we put the touchscreen controller in low-power mode the irq
pin may trigger (float) and if we then try to read a data packet we
get the following error in dmesg:

[  478.801017] silead_ts i2c-MSSL1680:00: Data read error -121

This commit disables the irq during suspend/resume fixing this error.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Use wait_for_completion_timeout() instead of
wait_for_completion_interruptible_timeout() to avoid stray signals ruining
firmware update. Our timeout is only 300 msec so we are fine simply letting
it expire in case device misbehaves.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Some old touchpad FWs need to have interrupt cleared before issuing reset
command after updating firmware. We clear interrupt by attempting to read
full report from the controller, and discarding any data read.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When using the 'object' sysfs attribute, T100 is not displayed in
the output.
Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The datasheet and application note does not mention an allowed range for
the M09_REGISTER_THRESHOLD parameter. One of our customers needs to set
lower values than 20 and they seem to work just fine on EDT EP0xx0M09 with
T5x06 touch.

So, lacking a known lower limit, we increase the range for thresholds,
and set the lower limit to 0. The documentation is updated accordingly.
Signed-off-by: Schoefegger Stefan <stefan.schoefegger@ginzinger.com>
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

gcc-7 warns about 'const SIMPLE_DEV_PM_OPS', as that macro already contains
a 'const' keyword:

drivers/input/keyboard/cros_ec_keyb.c:663:14: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
 static const SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume);

This removes the extra one.

Fixes: 6af6dc2d ("input: Add ChromeOS EC keyboard driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

PlayStation 1/2 joypads can be connected directly to the SPI interface.
Signed-off-by: Tomohiro Yoshidomi <sylph23k@gmail.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add USB IDs for two more Xbox 360 controllers.

I found them in the pull requests for the xboxdrv userspace driver, which
seems abandoned.

Thanks to psychogony and mkaito for reporting the IDs there!
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Reviewed-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The userspace xboxdrv driver [0] contains some USB IDs unknown to the
kernel driver. I have created a simple script [1] to extract the missing
devices and add them to xpad.

A quick google search confirmed that all the new devices called
Fightstick/pad are Arcade-type devices [2] where the
MAP_TRIGGERS_TO_BUTTONS option should apply.

There are some similar devices in the existing device table where this
flag is not set, but I did refrain from changing those.

[0] https://github.com/xboxdrv/xboxdrv/blob/stable/src/xpad_device.cpp
[1] http://codepad.org/CHV98BNH
[2] https://www.google.com/search?q=SFxT+Fightstick+Pro&tbm=ischSigned-off-by: Benjamin Valentin <benpicco@googlemail.com>
Reviewed-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Some entries in the table of supported devices are out of order.
To not create a mess when adding new ones using a script, sort them first.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Reviewed-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Prepare input updates for 4.12 merge window.

The MSB for the first byte of touch data transmission is always 1. Make
it a little more obvious we're testing this bit by using BIT(7).
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Cleanup driver slightly by using input_set_capability() instead
of manually setting the required bits.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The interrupt should be requested for the platform device
and not for the input device.

Fixes: 7f9ce649 ("Input: twl4030-pwrbutton - simplify driver using devm_*")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The device could as well be in command mode, in which this driver cannot
handle the device. When opening the device, let's make sure the device
will be in the mode we expect it to be for this driver.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add description of uinput module with a few examples.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Clevo P650RS and other similar devices require i8042 to be reset in order
to detect Synaptics touchpad.
Reported-by: Paweł Bylica <chfast@gmail.com>
Tested-by: Ed Bordin <edbordin@gmail.com>
Cc: stable@vger.kernel.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add a simple binding document describing the supported devices and the
I2C bus address.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

s/rollove/rollover/
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add a parameter for setting the resolution of xen-kbdfront in order to
be able to cope with a (virtual) frame buffer of arbitrary resolution.

While at it remove the pointless second reading of parameters from
Xenstore in the device connection phase: all parameters are available
during device probing already and that is where they should be read.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Temporary got a Lifebook E547 into my hands and noticed the touchpad
only works after running:

	echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled

Add it to the list of machines that need this workaround.

Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When switching rotary controlelr from plain IRQ number to IRQ resource, I
messed up the syntax.

Fixes: d422be5f ("Input: eeti_ts - expect platform code to set ... ")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Do not recommend people write to Dominic, rather everyone should be using
linux-input mailing list.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Unfortunately, Sphinx (or LaTeX) can't handle literal blocks inside
footnotes. So, just use normal text for the two literal code-blocks that
documents the output of /sys/kernel/debug/usb/devices for xpad devices.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The /proc/bus/usb/devices got moved to sysfs. It is now sitting at:

        /sys/kernel/debug/usb/devices
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Stop saying that API is experimental and that only USB is supported,
acknowledge that evdev is the preferred interface, and remove paragraph
encouraging people sending snail mail to Vojtech :) along with his email.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Split input documentation into several groups: kernel- and user-facing, and
notes about individual device drivers. Move device drivers docs into a
separate subdirectory.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Everyone should be using multitouch protocol B (slotted) now.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Consolidate use instructions and userspace API notes into the same chapter;
remove completely obsolete references, move into a separate subdirectory.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This is just a part of kernel documentation, it does not require explicit
license notice.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The heading level should be the same as for other devices.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver has been converted to use generic device properties, so
stop referring to platform data.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Move the documentation for Amiga CD32 together with other parallel port
joysticks.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The polled firmware update proved unreliable when testing on S7817. Use
attention to signal commands are complete.
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The data in F12_2D_Ctrl8 corresponds to the inactive border width used by
the RMI device. It is not in pixel units and should not be treated as a
clip value.
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When IRQ handling was moved to rmi_driver in 3aeed5b5 the naming of the
interrupt changed from "rmi4_i2c" to "2-0020" (or similar). This patch
restores the previous behaviour and makes the interrupt easier to identify
in /proc/interrupts.
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

ar1021_i2c also supports the ar1020 device I'm using. This is tested.
They also share the same datasheet:

   http://ww1.microchip.com/downloads/en/DeviceDoc/40001393C.pdf

So let users see that they have a compatible in front of them by adding
AR1020 to the driver's description.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>