- 28 Feb, 2024 1 commit
-
-
Matthew Auld authored
There is a corner case here where start/end is after/before the block range we are currently checking. If so we need to be sure that splitting the block will eventually give use the block size we need. To do that we should adjust the block range to account for the start/end, and only continue with the split if the size/alignment will fit the requested size. Not doing so can result in leaving split blocks unmerged when it eventually fails. Fixes: afea229f ("drm: improve drm_buddy_alloc function") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> # v5.18+ Reviewed-by:
Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240219121851.25774-4-matthew.auld@intel.comSigned-off-by:
Christian König <christian.koenig@amd.com>
-
- 26 Feb, 2024 4 commits
-
-
Jiri Slaby (SUSE) authored
Commit a5a92303 (fbdev: fbcon: Properly revert changes when vc_resize() failed) started restoring old font data upon failure (of vc_resize()). But it performs so only for user fonts. It means that the "system"/internal fonts are not restored at all. So in result, the very first call to fbcon_do_set_font() performs no restore at all upon failing vc_resize(). This can be reproduced by Syzkaller to crash the system on the next invocation of font_get(). It's rather hard to hit the allocation failure in vc_resize() on the first font_set(), but not impossible. Esp. if fault injection is used to aid the execution/failure. It was demonstrated by Sirius: BUG: unable to handle page fault for address: fffffffffffffff8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD cb7b067 P4D cb7b067 PUD cb7d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8007 Comm: poc Not tainted 6.7.0-g9d1694dc #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:fbcon_get_font+0x229/0x800 drivers/video/fbdev/core/fbcon.c:2286 Call Trace: <TASK> con_font_get drivers/tty/vt/vt.c:4558 [inline] con_font_op+0x1fc/0xf20 drivers/tty/vt/vt.c:4673 vt_k_ioctl drivers/tty/vt/vt_ioctl.c:474 [inline] vt_ioctl+0x632/0x2ec0 drivers/tty/vt/vt_ioctl.c:752 tty_ioctl+0x6f8/0x1570 drivers/tty/tty_io.c:2803 vfs_ioctl fs/ioctl.c:51 [inline] ... So restore the font data in any case, not only for user fonts. Note the later 'if' is now protected by 'old_userfont' and not 'old_data' as the latter is always set now. (And it is supposed to be non-NULL. Otherwise we would see the bug above again.) Signed-off-by:
Jiri Slaby (SUSE) <jirislaby@kernel.org> Fixes: a5a92303 ("fbdev: fbcon: Properly revert changes when vc_resize() failed") Reported-and-tested-by:
Ubisectech Sirius <bugreport@ubisectech.com> Cc: Ubisectech Sirius <bugreport@ubisectech.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240208114411.14604-1-jirislaby@kernel.org
-
Christian König authored
At least the device test requires that no other driver using TTM is loaded. So make those unit tests depend on UML || COMPILE_TEST to prevent people from trying them on bare metal. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/all/20240219230116.77b8ad68@yea/
-
Maxime Ripard authored
Sima needs a more recent release to apply a patch. Signed-off-by:Maxime Ripard <mripard@kernel.org>
-
Thierry Reding authored
Tegra DRM doesn't support display on Tegra234 and later, so make sure not to remove any existing framebuffers in that case. v2: - add comments explaining how this situation can come about - clear DRIVER_MODESET and DRIVER_ATOMIC feature bits Fixes: 6848c291 ("drm/aperture: Convert drivers to aperture interfaces") Signed-off-by:Thierry Reding <treding@nvidia.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240223150333.1401582-1-thierry.reding@gmail.com
-
- 23 Feb, 2024 7 commits
-
-
Rob Clark authored
We need to bail out before adding/removing devices if we are going to -EPROBE_DEFER. Otherwise boot can get stuck in a probe deferral loop due to a long-standing issue in driver core (see commit fbc35b45 ("Add documentation on meaning of -EPROBE_DEFER")). Deregistering the altmode child device can potentially also trigger bugs in the DRM bridge implementation, which does not expect bridges to go away. [DB: slightly fixed commit message by adding the word 'commit'] Suggested-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20231213210644.8702-1-robdclark@gmail.com [ johan: rebase on 6.8-rc4, amend commit message and mention DRM ] Fixes: 58ef4ece ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver") Cc: <stable@vger.kernel.org> # 6.3 Cc: Bjorn Andersson <andersson@kernel.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Reviewed-by:
Bjorn Andersson <andersson@kernel.org> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Johan Hovold authored
A recent DRM series purporting to simplify support for "transparent bridges" and handling of probe deferrals ironically exposed a use-after-free issue on pmic_glink_altmode probe deferral. This has manifested itself as the display subsystem occasionally failing to initialise and NULL-pointer dereferences during boot of machines like the Lenovo ThinkPad X13s. Specifically, the dp-hpd bridge is currently registered before all resources have been acquired which means that it can also be deregistered on probe deferrals. In the meantime there is a race window where the new aux bridge driver (or PHY driver previously) may have looked up the dp-hpd bridge and stored a (non-reference-counted) pointer to the bridge which is about to be deallocated. When the display controller is later initialised, this triggers a use-after-free when attaching the bridges: dp -> aux -> dp-hpd (freed) which may, for example, result in the freed bridge failing to attach: [drm:drm_bridge_attach [drm]] *ERROR* failed to attach bridge /soc@0/phy@88eb000 to encoder TMDS-31: -16 or a NULL-pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... Call trace: drm_bridge_attach+0x70/0x1a8 [drm] drm_aux_bridge_attach+0x24/0x38 [aux_bridge] drm_bridge_attach+0x80/0x1a8 [drm] dp_bridge_init+0xa8/0x15c [msm] msm_dp_modeset_init+0x28/0xc4 [msm] The DRM bridge implementation is clearly fragile and implicitly built on the assumption that bridges may never go away. In this case, the fix is to move the bridge registration in the pmic_glink_altmode driver to after all resources have been looked up. Incidentally, with the new dp-hpd bridge implementation, which registers child devices, this is also a requirement due to a long-standing issue in driver core that can otherwise lead to a probe deferral loop (see commit fbc35b45 ("Add documentation on meaning of -EPROBE_DEFER")). [DB: slightly fixed commit message by adding the word 'commit'] Fixes: 080b4e24 ("soc: qcom: pmic_glink: Introduce altmode support") Fixes: 2bcca96a ("soc: qcom: pmic-glink: switch to DRM_AUX_HPD_BRIDGE") Cc: <stable@vger.kernel.org> # 6.3 Cc: Bjorn Andersson <andersson@kernel.org> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
-
Johan Hovold authored
Combining allocation and registration is an anti-pattern that should be avoided. Add two new functions for allocating and registering an dp-hpd bridge with a proper 'devm' prefix so that it is clear that these are device managed interfaces. devm_drm_dp_hpd_bridge_alloc() devm_drm_dp_hpd_bridge_add() The new interface will be used to fix a use-after-free bug in the Qualcomm PMIC GLINK driver and may prevent similar issues from being introduced elsewhere. The existing drm_dp_hpd_bridge_register() is reimplemented using the above and left in place for now. Signed-off-by:
-
Johan Hovold authored
The two device node references taken during allocation need to be dropped when the auxiliary device is freed. Fixes: 6914968a ("drm/bridge: properly refcount DT nodes in aux bridge drivers") Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Dave Airlie authored
This reports the currently used vram allocations. userspace using this has been proposed for nvk, but it's a rather trivial uapi addition. Reviewed-by:
Faith Ekstrand <faith.ekstrand@collabora.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
This returns the BAR resources size so userspace can make decisions based on rebar support. userspace using this has been proposed for nvk, but it's a rather trivial uapi addition. Reviewed-by:
-
Dave Airlie authored
Turing and Ampere will continue to use the old paths by default, but we should allow distros to decide what the policy is. Signed-off-by:
-
- 22 Feb, 2024 15 commits
-
-
https://gitlab.freedesktop.org/drm/xe/kernelDave Airlie authored
UAPI Changes: - Remove support for persistent exec_queues - Drop a reduntant sysfs newline printout Cross-subsystem Changes: Core Changes: Driver Changes: - A three-patch fix for a VM_BIND rebind optimization path - Fix a modpost warning on an xe KUNIT module Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.8-2024-02-22' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.8-2024-02-22: amdgpu: - Suspend/resume fixes - Backlight error fix - DCN 3.5 fixes - Misc fixes Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2024-02-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fixup for TV mode Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
A list handling fix and 64bit division on 32bit platform fix for the drm/buddy allocator, a cast warning and an initialization fix for nouveau, a bridge handling fix for meson, an initialisation fix for ivpu, a SPARC build fix for fbdev, a double-free fix for ttm, and two fence handling fixes for syncobj. Signed-off-by:
-
Mikko Perttunen authored
On Tegra186, secure world applications may need to access host1x during suspend/resume, and rely on the kernel to keep Host1x out of reset during the suspend cycle. As such, as a quirk, skip asserting Host1x's reset on Tegra186. We don't need to keep the clocks enabled, as BPMP ensures the clock stays on while Host1x is being used. On newer SoC's, the reset line is inaccessible, so there is no need for the quirk. Fixes: b7c00cdf ("gpu: host1x: Enable system suspend callbacks") Signed-off-by:
Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
-
Ma Jun authored
Don't set power state flag when system enter runtime suspend, or it may cause runtime resume failure issue. Fixes: 3a9626c8 ("drm/amd: Stop evicting resources on APUs in suspend") Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
Melissa Wen authored
Use i2c adapter when there isn't aux_mode in dc_link to fix a null-pointer derefence that happens when running igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector detected as below: [ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0 [ +0.000010] #PF: supervisor read access in kernel mode [ +0.000005] #PF: error_code(0x0000) - not-present page [ +0.000004] PGD 0 P4D 0 [ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152 [ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021 [ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100 [ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16 [ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246 [ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080 [ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0 [ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980 [ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080 [ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f [ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0 [ +0.000003] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000006] <TASK> [ +0.000006] ? __die+0x23/0x70 [ +0.000011] ? page_fault_oops+0x17d/0x4c0 [ +0.000008] ? preempt_count_add+0x6e/0xa0 [ +0.000008] ? srso_alias_return_thunk+0x5/0x7f [ +0.000011] ? exc_page_fault+0x7f/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? i2c_transfer+0xd/0x100 [ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm] [ +0.000067] ? srso_alias_return_thunk+0x5/0x7f [ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm] [ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000042] edid_block_read+0x3b/0xd0 [drm] [ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm] [ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm] [ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu] [ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper] [ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper] [ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu] [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper] [ +0.000000] status_store+0xb2/0x1f0 [drm] [ +0.000000] kernfs_fop_write_iter+0x136/0x1d0 [ +0.000000] vfs_write+0x24d/0x440 [ +0.000000] ksys_write+0x6f/0xf0 [ +0.000000] do_syscall_64+0x60/0xc0 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ +0.000000] RIP: 0033:0x7f9ad46b4b00 [ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 [ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00 [ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009 [ +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000 [ +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417 [ +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001 [ +0.000000] </TASK> [ +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco [ +0.000000] snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4 [ +0.000000] usb_common crct10dif_common video wmi [ +0.000000] CR2: 00000000000004c0 [ +0.000000] ---[ end trace 0000000000000000 ]--- Fixes: 0e859faf ("drm/amd/display: Remove unwanted drm edid references") Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
Armin Wolf authored
After destroying dmub_srv, the memory associated with it is not freed, causing a memory leak: unreferenced object 0xffff896302b45800 (size 1024): comm "(udev-worker)", pid 222, jiffies 4294894636 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 6265fd77): [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340 [<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu] [<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu] [<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu] [<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu] [<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu] [<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90 [<ffffffff996918a3>] pci_device_probe+0xc3/0x230 [<ffffffff99805872>] really_probe+0xe2/0x480 [<ffffffff99805c98>] __driver_probe_device+0x78/0x160 [<ffffffff99805daf>] driver_probe_device+0x1f/0x90 [<ffffffff9980601e>] __driver_attach+0xce/0x1c0 [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0 [<ffffffff99804822>] bus_add_driver+0x112/0x210 [<ffffffff99807245>] driver_register+0x55/0x100 [<ffffffff990012d1>] do_one_initcall+0x41/0x300 Fix this by freeing dmub_srv after destroying it. Fixes: 743b9786 ("drm/amd/display: Hook up the DMUB service in DM") Signed-off-by:Armin Wolf <W_Armin@gmx.de> Signed-off-by:
-
Swapnil Patel authored
[Why] Currently there is an error while translating input clock sates into output clock states. The highest fclk setting from output sates is being dropped because of this error. [How] For dcn35 and dcn351, make output_states equal to input states. Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Swapnil Patel <swapnil.patel@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes potential null pointer dereference warnings in the dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up() functions. In both functions, the 'dc_dmub_srv' variable was being dereferenced before it was checked for null. This could lead to a null pointer dereference if 'dc_dmub_srv' is null. The fix is to check if 'dc_dmub_srv' is null before dereferencing it. Thus moving the null checks for 'dc_dmub_srv' to the beginning of the functions to ensure that 'dc_dmub_srv' is not null when it is dereferenced. Found by smatch & thus fixing the below: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128) drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164) Fixes: 028bac58 ("drm/amd/display: decouple dmcub execution to reduce lock granularity") Fixes: 65138eb7 ("drm/amd/display: Add DCN35 DMUB") Cc: JinZe.Xu <jinze.xu@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Josip Pavic <josip.pavic@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
-
Lewis Huang authored
[Why] The old asic only have 1 pwrseq hw. We don't need to map the diginst to pwrseq inst in old asic. [How] 1. Only mapping dig to pwrseq for new asic. 2. Move mapping function into dcn specific panel control component Cc: Stable <stable@vger.kernel.org> # v6.6+ Cc: Mario Limonciello <mario.limonciello@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3122Reviewed-by:
Anthony Koo <anthony.koo@amd.com> Acked-by:
Lewis Huang <lewis.huang@amd.com> Signed-off-by:
-
Wayne Lin authored
[Why] Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work" when boot up with a mst tbt4 dock connected. After analyzing, there are few parts needed to be adjusted: 1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox hpd_irq handler get registered which causes the error message. 2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not aligned with legacy interface sequence [How] Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler registration into register_hpd_handlers() to align other interfaces and get hpd_rx_offload_wq[].aconnector initialized earlier than that. Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that while calling dc_link_detect(). USB4 connection status will be proactively detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device() Cc: Stable <stable@vger.kernel.org> Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
-
Erik Kurzinger authored
During syncobj_eventfd_entry_func, dma_fence_chain_find_seqno may set the fence to NULL if the given seqno is signaled and a later seqno has already been submitted. In that case, the eventfd should be signaled immediately which currently does not happen. This is a similar issue to the one addressed by commit b19926d4 ("drm/syncobj: Deal with signalled fences in drm_syncobj_find_fence."). As a fix, if the return value of dma_fence_chain_find_seqno indicates success but it sets the fence to NULL, we will assign a stub fence to ensure the following code still signals the eventfd. v1 -> v2: assign a stub fence instead of signaling the eventfd Signed-off-by:
Erik Kurzinger <ekurzinger@nvidia.com> Fixes: c7a47229 ("drm/syncobj: add IOCTL to register an eventfd") Signed-off-by:
Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20240221184527.37667-1-ekurzinger@nvidia.com
-
Erik Kurzinger authored
When waiting for a syncobj timeline point whose fence has not yet been submitted with the WAIT_FOR_SUBMIT flag, a callback is registered using drm_syncobj_fence_add_wait and the thread is put to sleep until the timeout expires. If the fence is submitted before then, drm_syncobj_add_point will wake up the sleeping thread immediately which will proceed to wait for the fence to be signaled. However, if the WAIT_AVAILABLE flag is used instead, drm_syncobj_fence_add_wait won't get called, meaning the waiting thread will always sleep for the full timeout duration, even if the fence gets submitted earlier. If it turns out that the fence *has* been submitted by the time it eventually wakes up, it will still indicate to userspace that the wait completed successfully (it won't return -ETIME), but it will have taken much longer than it should have. To fix this, we must call drm_syncobj_fence_add_wait if *either* the WAIT_FOR_SUBMIT flag or the WAIT_AVAILABLE flag is set. The only difference being that with WAIT_FOR_SUBMIT we will also wait for the fence to be signaled after it has been submitted while with WAIT_AVAILABLE we will return immediately. IGT test patch: https://lists.freedesktop.org/archives/igt-dev/2024-January/067537.html v1 -> v2: adjust lockdep_assert_none_held_once condition (cherry picked from commit 8c44ea81) Fixes: 01d6c357 ("drm/syncobj: add support for timeline point wait v8") Signed-off-by:
-
Thomas Hellström authored
If caching mode change fails due to, for example, OOM we free the allocated pages in a two-step process. First the pages for which the caching change has already succeeded. Secondly the pages for which a caching change did not succeed. However the second step was incorrectly freeing the pages already freed in the first step. Fix. Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Fixes: 379989e7 ("drm/ttm/pool: Fix ttm_pool_alloc error path") Cc: Christian König <christian.koenig@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.4+ Reviewed-by:
-
- 21 Feb, 2024 8 commits
-
-
Javier Martinez Canillas authored
Commit 55bffc81 ("fbdev: Split frame buffer support in FB and FB_CORE symbols") added a new FB_CORE Kconfig symbol, that can be enabled to only have fbcon/VT and DRM fbdev emulation, but without support for any legacy fbdev driver. Unfortunately, it missed to change the CONFIG_FB in arch/sparc makefiles, which leads to the following linking error in some sparc64 configurations: sparc64-linux-ld: drivers/video/fbdev/core/fbcon.o: in function `fbcon_fb_registered': >> fbcon.c:(.text+0x4f60): undefined reference to `fb_is_primary_device' Fixes: 55bffc81 ("fbdev: Split frame buffer support in FB and FB_CORE symbols") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202401290306.IV8rhJ02-lkp@intel.com/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> # v6.6+ Signed-off-by:
-
Ashutosh Dixit authored
$ make W=1 -j100 M=drivers/gpu/drm/xe MODPOST drivers/gpu/drm/xe/Module.symvers WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/xe/tests/xe_mocs_test.o Fix is identical to '1d425066 ("drm/xe: Fix modpost warning on kunit modules")'. Fixes: a6a4ea6d ("drm/xe: Add mocs kunit") Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit bb619d71) Link: https://patchwork.freedesktop.org/patch/msgid/20240213033548.76219-1-ashutosh.dixit@intel.comSigned-off-by:
-
Ashutosh Dixit authored
Newline in name is redunant and produces an unnecessary empty line during 'cat name'. Newline is added during sysfs_emit. See '27a1a1e2 ("drm/xe: stringify the argument to avoid potential vulnerability")'. v2: Add Fixes tag (Riana) Fixes: 7b076d14 ("drm/xe/mtl: Add support to get C6 residency/status of MTL") Reviewed-by:
Riana Tauro <riana.tauro@intel.com> Signed-off-by:
-
Matthew Brost authored
Compact 64k PTEs are only intended to be used within a single VMA which covers the entire 2MB range of the compact 64k PTEs. Add XE_VMA_PTE_COMPACT VMA flag to indicate compact 64k PTEs are used and update xe_vma_max_pte_size to return at least 2MB if set. v2: Include missing changes Fixes: 8f33b4f0 ("drm/xe: Avoid doing rebinds") Fixes: c47794bd ("drm/xe: Set max pte size when skipping rebinds") Reported-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/758Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
-
Matthew Brost authored
Add XE_VMA_PTE_64K VMA flag to ensure skipping rebinds does not cross 64k page boundaries. Fixes: 8f33b4f0 ("drm/xe: Avoid doing rebinds") Fixes: c47794bd ("drm/xe: Set max pte size when skipping rebinds") Signed-off-by:
-
Matthew Brost authored
xe_vma_set_pte_size had a return value and did not set the 4k VMA flag. Both of these were incorrect. Fix these. Fixes: c47794bd ("drm/xe: Set max pte size when skipping rebinds") Signed-off-by:
-
Thomas Hellström authored
Persistent exec_queues delays explicit destruction of exec_queues until they are done executing, but destruction on process exit is still immediate. It turns out no UMD is relying on this functionality, so remove it. If there turns out to be a use-case in the future, let's re-add. Persistent exec_queues were never used for LR VMs v2: - Don't add an "UNUSED" define for the missing property (Lucas, Rodrigo) v3: - Remove the remaining struct xe_exec_queue::persistent state (Niranjana, Lucas) Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Francois Dugast <francois.dugast@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Acked-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240209113444.8396-1-thomas.hellstrom@linux.intel.com (cherry picked from commit f1a9abc0) Signed-off-by:
-
Maxime Ripard authored
Commit 1fd4a5a3 ("drm/connector: Rename legacy TV property") failed to update all the users of the struct drm_tv_connector_state mode field, which resulted in a build failure in i915. However, a subsequent commit in the same series reintroduced a mode field in that structure, with a different semantic but the same type, with the assumption that all previous users were updated. Since that didn't happen, the i915 driver now compiles, but mixes accesses to the legacy_mode field and the newer mode field, but with the previous semantics. This obviously doesn't work very well, so we need to update the accesses that weren't in the legacy renaming commit. Fixes: 1fd4a5a3 ("drm/connector: Rename legacy TV property") Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 20 Feb, 2024 1 commit
-
-
Andrzej Kacprowski authored
There is no point in requesting 1 tile on VPU40xx as the FW will probably need more tiles to run workloads, so it will have to reconfigure PLL anyway. Don't enable any tiles and allow the FW to perform initial tile configuration. This improves NPU boot stability as the tiles are always enabled only by the FW from the same initial state. Fixes: 79cdc56c ("accel/ivpu: Add initial support for VPU 4") Cc: stable@vger.kernel.org Signed-off-by:
Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Signed-off-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240220131624.1447813-1-jacek.lawrynowicz@linux.intel.com
-
- 19 Feb, 2024 2 commits
-
-
Matthew Auld authored
Doesn't seem to compile on 32b, presumably due to u64 mod/division. Simplest is to just switch over to u32 here. Also make print modifiers consistent with that. Fixes: a64056bb ("drm/tests/drm_buddy: add alloc_contiguous test") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Martin Blumenstingl authored
Stop calling drm_bridge_remove() for bridges allocated/managed by other drivers in the remove paths of meson_encoder_{cvbs,dsi,hdmi}. drm_bridge_remove() unregisters the bridge so it cannot be used anymore. Doing so for bridges we don't own can lead to the video pipeline not being able to come up after -EPROBE_DEFER of the VPU because we're unregistering a bridge that's managed by another driver. The other driver doesn't know that we have unregistered it's bridge and on subsequent .probe() we're not able to find those bridges anymore (since nobody re-creates them). This fixes probe errors on Meson8b boards with the CVBS outputs enabled. Fixes: 09847723 ("drm/meson: remove drm bridges at aggregate driver unbind time") Fixes: 42dcf15f ("drm/meson: add DSI encoder") Cc: <stable@vger.kernel.org> Reported-by:Steve Morvai <stevemorvai@hotmail.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
-
- 18 Feb, 2024 2 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Reformat nested if-conditionals in Makefiles with 4 spaces - Fix CONFIG_DEBUG_INFO_BTF builds for big endian - Fix modpost for module srcversion - Fix an escape sequence warning in gen_compile_commands.py - Fix kallsyms to ignore ARMv4 thunk symbols * tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kallsyms: ignore ARMv4 thunks along with others modpost: trim leading spaces when processing source files list gen_compile_commands: fix invalid escape sequence warning kbuild: Fix changing ELF file type for output of gen_btf for big endian docs: kconfig: Fix grammar and formatting kbuild: use 4-space indentation when followed by conditionals
-
