- 27 Jul, 2021 2 commits
-
-
Linus Walleij authored
The Intel IXP425 Vulcan board has an Exar XR16L2551 8250-compatible. It works like an 8250 but it is always good to specify exactly which component we are using. This allows us to specify: compatible = "exar,xr16l2551", "ns8250"; Put in some sibling Exar serial compatibles while we're at it. Cc: Marc Zyngier <maz@kernel.org> Cc: devicetree@vger.kernel.org Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210716225319.1282704-1-linus.walleij@linaro.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maciej W. Rozycki authored
Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in the enhanced (650) mode, which we select in `autoconfig_has_efr' with the ECB bit set in the EFR register, they support the receive interrupt trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112, 120. This applies to the original OX16C950 discrete UART[1] as well as 950 cores embedded into more complex devices. For these devices we set the default to 112, which sets an excessively high level of 112 or 7/8 of the FIFO capacity, unlike with other port types where we choose at most 1/2 of their respective FIFO capacities. Additionally we don't make the trigger level configurable. Consequently frequent input overruns happen with high bit rates where hardware flow control cannot be used (e.g. terminal applications) even with otherwise highly-performant systems. Lower the default receive interrupt trigger level to 32 then, and make it configurable. Document the trigger levels along with other port types, including the set of 16, 32, 64, 112 for the transmit interrupt as well[2]. References: [1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger Levels", p. 22 [2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22 Signed-off-by:Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.ukSigned-off-by:
-
- 21 Jul, 2021 27 commits
-
-
Juergen Gross authored
Xen frontends shouldn't BUG() in case of illegal data received from their backends. So replace the BUG_ON()s when reading illegal data from the ring page with negative return values. Reviewed-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210707091045.460-1-jgross@suse.comSigned-off-by:
-
Jiri Slaby authored
'state' variable is only set but never read in amiserial's shutdown. Drop it. It was like this since the driver was added to the tree as far as I can tell. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210714091314.8292-11-jslaby@suse.czSigned-off-by:
-
Jiri Slaby authored
amiserial deals only with a single serial, so drop the rs_table array and NR_PORTS and define a single non-array serial_state for simplicity instead. Signed-off-by:
-
Jiri Slaby authored
The #include directives are in different places in amiserial: 1) there is no reason for that, and 2) it makes hard to judge what is included and what is not. Therefore, move all the includes to a single place and sort them. Signed-off-by:
-
Jiri Slaby authored
"custom" macro is a too generic name. Expand it -- that is use amiga_custom on all the locations. Signed-off-by:
-
Jiri Slaby authored
Having a macro (serial_isroot) for capable(CAP_SYS_ADMIN) does not save us from anything. It rather obfuscates the code. Hence expand serial_isroot to be explicit like every other driver is. Signed-off-by:
-
Jiri Slaby authored
Zeroing each member of struct serial_state in probe is fragile and overly complicated. Do one memset for them all. Signed-off-by:
-
Jiri Slaby authored
tty->port is already set when rs_open is called given we linked it by tty_port_link_device(). If it wasn't, the tty layer would WARN loudly. So it's pointless to set it in rs_open. Instead, use the value in tty->port to find out the serial_state (info). It's a fallout of commit b19e2ca7 (TTY: use tty_port_link_device) which added tty_port_link_device here, but omitted to remove the tty->port assignment from rs_open. Signed-off-by:
-
Jiri Slaby authored
It's always 1, so define a macro for it instead. Note that the check in set_serial_info is doubled, hence remove the latter. Signed-off-by:
-
Jiri Slaby authored
The comment about interrupt routines is stale at least since commit 41c28ff1 (kill _INLINE_) from 2006. So remove the obsolete parts and leave only "here they start...". Signed-off-by:
-
Jiri Slaby authored
Remove a print of serial_name and serial_version from the probe function, i.e. show_serial_version() from amiga_serial_probe(). The value of such a print is minimal. Aside from that, the version is artificial (copied from the serial core in 2.3.45pre2 and never increased). So inline the version into seq_printf's format string in rs_proc_show() and remove both strings completely. Signed-off-by:
-
Jiri Slaby authored
The ugly DBG_CNT macro is unused, so remove. Signed-off-by:
-
Andy Shevchenko authored
For the sake of reducing layering violation add ->unregister_gpio() callback and use it in the ->exit() one. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210713095821.7834-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Colin Ian King authored
There is a spelling mistake in the Kconfig text. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210719102421.14813-1-colin.king@canonical.comSigned-off-by:
-
Nobuhiro Iwamatsu authored
Convert serial for Cadence UART bindings documentation to YAML. Reviewed-by:
Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20210715092252.225740-1-iwamatsu@nigauri.orgSigned-off-by:
-
Shubhrajyoti Datta authored
In the commit 07e5d4ff ("Revert serial-uartlite: Add runtime support") the runtime pm support was reverted to aid reverting of the other patches. This patch adds the runtime PM support back. The runtime pm calls are used to gate and enable the clocks. Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20210713064835.27978-3-shubhrajyoti.datta@xilinx.comSigned-off-by:
-
Shubhrajyoti Datta authored
In case the uart registration fails the clocks are left enabled. Disable the clock in case of errors. Signed-off-by:
-
Igor Matheus Andrade Torrente authored
This issue happens when a userspace program does an ioctl FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct containing only the fields xres, yres, and bits_per_pixel with values. If this struct is the same as the previous ioctl, the vc_resize() detects it and doesn't call the resize_screen(), leaving the fb_var_screeninfo incomplete. And this leads to the updatescrollmode() calculates a wrong value to fbcon_display->vrows, which makes the real_y() return a wrong value of y, and that value, eventually, causes the imageblit to access an out-of-bound address value. To solve this issue I made the resize_screen() be called even if the screen does not need any resizing, so it will "fix and fill" the fb_var_screeninfo independently. Cc: stable <stable@vger.kernel.org> # after 5.15-rc2 is out, give it time to bake Reported-and-tested-by: syzbot+858dc7a2f7ef07c2c219@syzkaller.appspotmail.com Signed-off-by:
Igor Matheus Andrade Torrente <igormtorrente@gmail.com> Link: https://lore.kernel.org/r/20210628134509.15895-1-igormtorrente@gmail.comSigned-off-by:
-
Tamseel Shams authored
When DMA is used for TX and RX by serial driver, it should pass the DMA device pointer to DMA API instead of UART device pointer. DMA device should be used for DMA API because only the DMA device is aware of how the device connects to the memory. There might be an extra level of address translation due to a SMMU attached to the DMA device. When serial device is used for DMA API, the DMA API will have no clue of the SMMU attached to the DMA device. This patch is necessary to fix the SMMU page faults which is observed when a DMA(with SMMU enabled) is attached to UART for transfer. Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
Tamseel Shams <m.shams@samsung.com> Signed-off-by:
Ajay Kumar <ajaykumar.rs@samsung.com> Link: https://lore.kernel.org/r/20210629045902.48912-1-m.shams@samsung.comSigned-off-by:
-
Bing Fan authored
In order to make pl011 work better, multiple interrupts are required, such as TXIM, RXIM, RTIM, error interrupt(FE/PE/BE/OE); at the same time, pl011 to GIC does not merge the interrupt lines(each serial-interrupt corresponding to different GIC hardware interrupt), so need to enable and request multiple gic interrupt numbers in the driver. Signed-off-by:
Bing Fan <tombinfan@tencent.com> Link: https://lore.kernel.org/r/1625103512-30182-1-git-send-email-hptsfb@gmail.comSigned-off-by:
-
Lino Sanfilippo authored
Add basic support for RS485: Provide a callback to configure RS485 settings. Handle the RS485 specific part in the functions pl011_rs485_tx_start() and pl011_rs485_tx_stop() which extend the generic start/stop callbacks. Beside via IOCTL from userspace RS485 can be enabled by means of the device tree property "rs485-enabled-at-boot-time". Signed-off-by:
Lino Sanfilippo <LinoSanfilippo@gmx.de> Link: https://lore.kernel.org/r/20210630225644.3744-1-LinoSanfilippo@gmx.deSigned-off-by:
-
Zheyu Ma authored
uart_handle_dcd_change() requires a port lock to be held and will emit a warning when lockdep is enabled. Held corresponding lock to fix the following warnings. [ 132.528648] WARNING: CPU: 5 PID: 11600 at drivers/tty/serial/serial_core.c:3046 uart_handle_dcd_change+0xf4/0x120 [ 132.530482] Modules linked in: [ 132.531050] CPU: 5 PID: 11600 Comm: jsm Not tainted 5.14.0-rc1-00003-g7fef2edf-dirty #31 [ 132.535268] RIP: 0010:uart_handle_dcd_change+0xf4/0x120 [ 132.557100] Call Trace: [ 132.557562] ? __free_pages+0x83/0xb0 [ 132.558213] neo_parse_modem+0x156/0x220 [ 132.558897] neo_param+0x399/0x840 [ 132.559495] jsm_tty_open+0x12f/0x2d0 [ 132.560131] uart_startup.part.18+0x153/0x340 [ 132.560888] ? lock_is_held_type+0xe9/0x140 [ 132.561660] uart_port_activate+0x7f/0xe0 [ 132.562351] ? uart_startup.part.18+0x340/0x340 [ 132.563003] tty_port_open+0x8d/0xf0 [ 132.563523] ? uart_set_options+0x1e0/0x1e0 [ 132.564125] uart_open+0x24/0x40 [ 132.564604] tty_open+0x15c/0x630 Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/1626242003-3809-1-git-send-email-zheyuma97@gmail.comSigned-off-by:
-
Maciej W. Rozycki authored
Report extra baud rates supported above the base rate for ports with the UPF_MAGIC_MULTIPLIER property, so that people have a way to find out that they can be used with their system, e.g.: Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled printk: console [ttyS0] disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 printk: console [ttyS0] enabled printk: bootconsole [uart8250] disabled serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A Otherwise there is no clear way to figure this out, as the feature is only reported as an obscure TTY flag in bit 16: $ cat /sys/class/tty/ttyS[0-2]/flags 0x10010040 0x10010040 0x90000040 $ Signed-off-by:
-
Johan Hovold authored
Allow more drivers to be compile tested more easily, for example, when doing subsystem-wide changes. Verified on X86_64 as well as arm, powerpc and m68k with minimal configs in order to catch missing implicit build dependencies. Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210715083011.18887-1-johan@kernel.orgSigned-off-by:
-
Colin Ian King authored
Pointer membase is currently being in initialized with zero rather than NULL. Fix this. Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jianmin Lv authored
ACPI-based Loongson boards need configurable rather than fixed clock frequency for serial ports. Signed-off-by:
Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by:
Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/r/20210715061637.134436-1-chenhuacai@loongson.cnSigned-off-by:
-
Colin Ian King authored
Don't populate the const array k3_soc_devices on the stack but instead it static. Makes the object code smaller by 44 bytes: Before: text data bss dec hex filename 31628 5609 128 37365 91f5 drivers/tty/serial/8250/8250_omap.o After: text data bss dec hex filename 31520 5673 128 37321 91c9 drivers/tty/serial/8250/8250_omap.o Reduction of 44 bytes (gcc version 10.3.0) Signed-off-by:
-
- 18 Jul, 2021 11 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs are offlined. - Fix 'perf test' problems related to the recently added hybrid (BIG/little) code. - Split ARM's coresight (hw tracing) decode by aux records to avoid fatal decoding errors. - Fix add event failure in 'perf probe' when running 32-bit perf in a 64-bit kernel. - Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set. - Fix memory and refcount leaks detected by ASAn when running 'perf test', should be clean of warnings now. - Remove broken definition of __LITTLE_ENDIAN from tools' linux/kconfig.h, which was breaking the build in some systems. - Cast PTHREAD_STACK_MIN to int as it may turn into 'long sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some systems. - Fix libperf build error with LIBPFM4=1. - Sync UAPI files changed by the memfd_secret new syscall. * tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits) perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel perf data: Close all files in close_dir() perf probe-file: Delete namelist in del_events() on the error path perf test bpf: Free obj_buf perf trace: Free strings in trace__parse_events_option() perf trace: Free syscall tp fields in evsel->priv perf trace: Free syscall->arg_fmt perf trace: Free malloc'd trace fields on exit perf lzma: Close lzma stream on exit perf script: Fix memory 'threads' and 'cpus' leaks on exit perf script: Release zstd data perf session: Cleanup trace_event perf inject: Close inject.output on exit perf report: Free generated help strings for sort option perf env: Fix memory leak of cpu_pmu_caps perf test maps__merge_in: Fix memory leak of maps perf dso: Fix memory leak in dso__new_map() perf test event_update: Fix memory leak of unit perf test event_update: Fix memory leak of evlist ...
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "A few fixes for issues in the new online shrink code, additional corrections for my recent bug-hunt w.r.t. extent size hints on realtime, and improved input checking of the GROWFSRT ioctl. IOW, the usual 'I somehow got bored during the merge window and resumed auditing the farther reaches of xfs': - Fix shrink eligibility checking when sparse inode clusters enabled - Reset '..' directory entries when unlinking directories to prevent verifier errors if fs is shrinked later - Don't report unusable extent size hints to FSGETXATTR - Don't warn when extent size hints are unusable because the sysadmin configured them that way - Fix insufficient parameter validation in GROWFSRT ioctl - Fix integer overflow when adding rt volumes to filesystem" * tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: detect misaligned rtinherit directory extent size hints xfs: fix an integer overflow error in xfs_growfs_rt xfs: improve FSGROWFSRT precondition checking xfs: don't expose misaligned extszinherit hints to userspace xfs: correct the narrative around misaligned rtinherit/extszinherit dirs xfs: reset child dir '..' entry when unlinking child xfs: check for sparse inode clusters that cross new EOAG when shrinking -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull iomap fixes from Darrick Wong: "A handful of bugfixes for the iomap code. There's nothing especially exciting here, just fixes for UBSAN (not KASAN as I erroneously wrote in the tag message) warnings about undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some reshuffling of per-page block state info to fix some problems with gfs2. - Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE - Fix assertion errors when using inlinedata files on gfs2" * tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor iomap: Don't create iomap_page objects for inline files iomap: Permit pages without an iop to enter writeback iomap: remove the length variable in iomap_seek_hole iomap: remove the length variable in iomap_seek_data
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Restore the original behavior of scripts/setlocalversion when LOCALVERSION is set to empty. - Show Kconfig prompts even for 'make -s' - Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y for older GNU Make versions * tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation: Fix intiramfs script name Kbuild: lto: fix module versionings mismatch in GNU make 3.X kbuild: do not suppress Kconfig prompts for silent build scripts/setlocalversion: fix a bug when LOCALVERSION is empty
-
Robert Richter authored
Documentation was not changed when renaming the script in commit 80e715a0 ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh"). Fixing this. Basically does: $ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh) Fixes: 80e715a0 ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh") Signed-off-by:
Robert Richter <rrichter@amd.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Lecopzer Chen authored
When building modules(CONFIG_...=m), I found some of module versions are incorrect and set to 0. This can be found in build log for first clean build which shows WARNING: EXPORT symbol "XXXX" [drivers/XXX/XXX.ko] version generation failed, symbol will not be versioned. But in second build(incremental build), the WARNING disappeared and the module version becomes valid CRC and make someone who want to change modules without updating kernel image can't insert their modules. The problematic code is + $(foreach n, $(filter-out FORCE,$^), \ + $(if $(wildcard $(n).symversions), \ + ; cat $(n).symversions >> $@.symversions)) For example: rm -f fs/notify/built-in.a.symversions ; rm -f fs/notify/built-in.a; \ llvm-ar cDPrST fs/notify/built-in.a fs/notify/fsnotify.o \ fs/notify/notification.o fs/notify/group.o ... `foreach n` shows nothing to `cat` into $(n).symversions because `if $(wildcard $(n).symversions)` return nothing, but actually they do exist during this line was executed. -rw-r--r-- 1 root root 168580 Jun 13 19:10 fs/notify/fsnotify.o -rw-r--r-- 1 root root 111 Jun 13 19:10 fs/notify/fsnotify.o.symversions The reason is the $(n).symversions are generated at runtime, but Makefile wildcard function expends and checks the file exist or not during parsing the Makefile. Thus fix this by use `test` shell command to check the file existence in runtime. Rebase from both: 1. [https://lore.kernel.org/lkml/20210616080252.32046-1-lecopzer.chen@mediatek.com/] 2. [https://lore.kernel.org/lkml/20210702032943.7865-1-lecopzer.chen@mediatek.com/] Fixes: 38e89184 ("kbuild: lto: fix module versioning") Co-developed-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Lecopzer Chen <lecopzer.chen@mediatek.com> Signed-off-by:
-
Masahiro Yamada authored
When a new CONFIG option is available, Kbuild shows a prompt to get the user input. $ make [ snip ] Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW) This is the only interactive place in the build process. Commit 174a1dcc ("kbuild: sink stdout from cmd for silent build") suppressed Kconfig prompts as well because syncconfig is invoked by the 'cmd' macro. You cannot notice the fact that Kconfig is waiting for the user input. Use 'kecho' to show the equivalent short log without suppressing stdout from sub-make. Fixes: 174a1dcc ("kbuild: sink stdout from cmd for silent build") Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Mikulas Patocka authored
The commit 042da426 ("scripts/setlocalversion: simplify the short version part") reduces indentation. Unfortunately, it also changes behavior in a subtle way - if the user has empty "LOCALVERSION" variable, the plus sign is appended to the kernel version. It wasn't appended before. This patch reverts to the old behavior - we append the plus sign only if the LOCALVERSION variable is not set. Fixes: 042da426 ("scripts/setlocalversion: simplify the short version part") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Yang Jihong authored
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events. As a result, the command fails. Before: #perf sched record sleep 1 event syntax error: 'sched:sched_stat_wait' \___ unknown tracepoint Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events Solution: Check whether schedstat tracepoints are exposed. If no, these events are not recorded. After: # perf sched record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ] # perf sched report run measurement overhead: 4736 nsecs sleep measurement overhead: 9059979 nsecs the run test took 999854 nsecs the sleep test took 8945271 nsecs nr_run_events: 716 nr_sleep_events: 785 nr_wakeup_events: 0 ... ------------------------------------------------------------ Fixes: 2a09b5de ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set") Signed-off-by:Yang Jihong <yangjihong1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Yafang Shao <laoar.shao@gmail.com> Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Yang Jihong authored
The "address" member of "struct probe_trace_point" uses long data type. If kernel is 64-bit and perf program is 32-bit, size of "address" variable is 32 bits. As a result, upper 32 bits of address read from kernel are truncated, an error occurs during address comparison in kprobe_warn_out_range(). Before: # perf probe -a schedule schedule is out of .text, skip it. Error: Failed to add events. Solution: Change data type of "address" variable to u64 and change corresponding address printing and value assignment. After: # perf.new.new probe -a schedule Added new event: probe:schedule (on schedule) You can now use it in all perf tools, such as: perf record -e probe:schedule -aR sleep 1 # perf probe -l probe:schedule (on schedule@kernel/sched/core.c) # perf record -e probe:schedule -aR sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ] # perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 1K of event 'probe:schedule' # Event count (approx.): 1366 # # Overhead Command Shared Object Symbol # ........ ............... ................. ............ # 6.22% migration/0 [kernel.kallsyms] [k] schedule 6.22% migration/1 [kernel.kallsyms] [k] schedule 6.22% migration/2 [kernel.kallsyms] [k] schedule 6.22% migration/3 [kernel.kallsyms] [k] schedule 6.15% migration/10 [kernel.kallsyms] [k] schedule 6.15% migration/11 [kernel.kallsyms] [k] schedule 6.15% migration/12 [kernel.kallsyms] [k] schedule 6.15% migration/13 [kernel.kallsyms] [k] schedule 6.15% migration/14 [kernel.kallsyms] [k] schedule 6.15% migration/15 [kernel.kallsyms] [k] schedule 6.15% migration/4 [kernel.kallsyms] [k] schedule 6.15% migration/5 [kernel.kallsyms] [k] schedule 6.15% migration/6 [kernel.kallsyms] [k] schedule 6.15% migration/7 [kernel.kallsyms] [k] schedule 6.15% migration/8 [kernel.kallsyms] [k] schedule 6.15% migration/9 [kernel.kallsyms] [k] schedule 0.22% rcu_sched [kernel.kallsyms] [k] schedule ... # # (Cannot load tips.txt file, please install perf!) # Signed-off-by:Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jianlin Lv <jianlin.lv@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.comSigned-off-by:
-
