- 03 Jun, 2016 4 commits
-
-
Larry Finger authored
[ Upstream commit baa17022 ] The previous patch added an option to rtl8723be to manually select the antenna for those cases when only a single antenna is present, and the on-board EEPROM is incorrectly programmed. This patch implements the necessary changes in the Bluetooth coexistence driver. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [V4.0+] Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Larry Finger authored
[ Upstream commit c18d8f50 ] A number of new laptops have been delivered with only a single antenna. In principle, this is OK; however, a problem arises when the on-board EEPROM is programmed to use the other antenna connection. The option of opening the computer and moving the connector is not always possible as it will void the warranty in some cases. In addition, this solution breaks the Windows driver when the box dual boots Linux and Windows. A fix involving a new module parameter has been developed. This commit adds the new parameter and implements the changes needed for the driver. Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 7079604d ] This driver has a number of errors in the module initialization. These include the following: Parameter msi_support is stored in two places - one is removed. Paramters sw_crypto and disable_watchdog were never stored in the final locations, nor were they initialized properly. Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 96f859d5 ] Because struct xfs_agfl is 36 bytes long and has a 64-bit integer inside it, gcc will quietly round the structure size up to the nearest 64 bits -- in this case, 40 bytes. This results in the XFS_AGFL_SIZE macro returning incorrect results for v5 filesystems on 64-bit machines (118 items instead of 119). As a result, a 32-bit xfs_repair will see garbage in AGFL item 119 and complain. Therefore, tell gcc not to pad the structure so that the AGFL size calculation is correct. cc: <stable@vger.kernel.org> # 3.10 - 4.4 Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
- 01 Jun, 2016 5 commits
-
-
Dave Chinner authored
[ Upstream commit ad747e3b ] Commit 96f859d5 ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") allowed the freelist to use the empty slot at the end of the freelist on 64 bit systems that was not being used due to sizeof() rounding up the structure size. This has caused versions of xfs_repair prior to 4.5.0 (which also has the fix) to report this as a corruption once the filesystem has been grown. Older kernels can also have problems (seen from a whacky container/vm management environment) mounting filesystems grown on a system with a newer kernel than the vm/container it is deployed on. To avoid this problem, change the initial free list indexes not to wrap across the end of the AGFL, hence avoiding the initialisation of agf_fllast to the last index in the AGFL. cc: <stable@vger.kernel.org> # 4.4-4.5 Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
-
Eric Sandeen authored
[ Upstream commit d0a58e83 ] Today, a kernel which refuses to mount a filesystem read-write due to unknown ro-compat features can still transition to read-write via the remount path. The old kernel is most likely none the wiser, because it's unaware of the new feature, and isn't using it. However, writing to the filesystem may well corrupt metadata related to that new feature, and moving to a newer kernel which understand the feature will have problems. Right now the only ro-compat feature we have is the free inode btree, which showed up in v3.16. It would be good to push this back to all the active stable kernels, I think, so that if anyone is using newer mkfs (which enables the finobt feature) with older kernel releases, they'll be protected. Cc: <stable@vger.kernel.org> # 3.10.x- Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Bill O'Donnell <billodo@redhat.com> Reviewed-by:
-
Joseph Salisbury authored
[ Upstream commit 7b9bc799 ] BugLink: http://bugs.launchpad.net/bugs/972604 Commit 09c9bae2 ("ath5k: add led pin configuration for compaq c700 laptop") added a pin configuration for the Compaq c700 laptop. However, the polarity of the led pin is reversed. It should be red for wifi off and blue for wifi on, but it is the opposite. This bug was reported in the following bug report: http://pad.lv/972604 Fixes: 09c9bae2 ("ath5k: add led pin configuration for compaq c700 laptop") Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Cc: stable@vger.kernel.org Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Javier Martinez Canillas authored
[ Upstream commit 5e3ca2b3 ] Commit 6261b06d ("regulator: Defer lookup of supply to regulator_get") moved the regulator supplies lookup logic from the regulators registration to the regulators get time. Unfortunately, that changed the behavior of the regulator core since now a parent supply with a child regulator marked as always-on, won't be enabled unless a client driver attempts to get the child regulator during boot. This patch tries to resolve the parent supply for the already registered regulators each time that a new regulator is registered. So the regulators that have child regulators marked as always on will be enabled regardless if a driver gets the child regulator or not. That was the behavior before the mentioned commit, since parent supplies were looked up at regulator registration time instead of during child get. Since regulator_resolve_supply() checks for rdev->supply, most of the times it will be a no-op. Errors aren't checked to keep the possible out of order dependencies which was the motivation for the mentioned commit. Also, the supply being available will be enforced on regulator get anyways in case the resolve fails on regulators registration. Fixes: 6261b06d ("regulator: Defer lookup of supply to regulator_get") Suggested-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Mark Brown authored
[ Upstream commit 609ca5f3 ] The regulator_list has exactly the same contents as the list that the driver core maintains of regulator_class members so is redundant. As a first step in converting over to use the class device list convert our iteration in late_initcall() to use the class device iterator. Signed-off-by:
-
- 30 May, 2016 3 commits
-
-
Anilkumar Kolli authored
[ Upstream commit 9ddc486a ] It is observed that, we are disabling the packet log if we write same value to the pktlog_filter for the second time. Always enable pktlogs on non zero filter. Fixes: 90174455 ("ath10k: add support to configure pktlog filter") Cc: stable@vger.kernel.org Signed-off-by:
Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by:
-
Rajkumar Manoharan authored
[ Upstream commit 8a75fc54 ] commit 166de3f1 ("ath10k: remove supported chain mask") had revealed an issue on monitor mode. Configuring NSS upon monitor interface creation is causing target assert in all qca9888x and qca6174 firmware. Firmware assert issue can be reproduced by below sequence even after reverting commit 166de3f1 ("ath10k: remove supported chain mask"). ip link set wlan0 down iw wlan0 set type monitor iw phy0 set antenna 7 ip link set wlan0 up This issue is originally reported on qca9888 with 10.1 firmware. Fixes: 5572a95b ("ath10k: apply chainmask settings to vdev on creation") Cc: stable@vger.kernel.org Reported-by:
Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by:
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit ab92b232 ] Currently, the PT driver always sets the PMI bit one region (page) before the STOP region so that we can wake up the consumer before we run out of room in the buffer and have to disable the event. However, we also need an interrupt in the last output region, so that we actually get to disable the event (if no more room from new data is available at that point), otherwise hardware just quietly refuses to start, but the event is scheduled in and we end up losing trace data till the event gets removed. For a cpu-wide event it is even worse since there may not be any re-scheduling at all and no chance for the ring buffer code to notice that its buffer is filled up and the event needs to be disabled (so that the consumer can re-enable it when it finishes reading the data out). In other words, all the trace data will be lost after the buffer gets filled up. This patch makes PT also generate a PMI when the last output region is full. Reported-by:
Markus Metzger <markus.t.metzger@intel.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/1462886313-13660-2-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
- 21 May, 2016 1 commit
-
-
Sasha Levin authored
Signed-off-by:
-
- 17 May, 2016 27 commits
-
-
Linus Torvalds authored
[ Upstream commit 31b0b385 ] The slab name ends up being visible in the directory structure under /sys, and even if you don't have access rights to the file you can see the filenames. Just use a 64-bit counter instead of the pointer to the 'net' structure to generate a unique name. This code will go away in 4.7 when the conntrack code moves to a single kmemcache, but this is the backportable simple solution to avoiding leaking kernel pointers to user space. Fixes: 5b3501fa ("netfilter: nf_conntrack: per netns nf_conntrack_cachep") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Junxiao Bi authored
[ Upstream commit c25a1e06 ] Commit 702e5bc6 ("ocfs2: use generic posix ACL infrastructure") refactored code to use posix_acl_create. The problem with this function is that it is not mindful of the cluster wide inode lock making it unsuitable for use with ocfs2 inode creation with ACLs. For example, when used in ocfs2_mknod, this function can cause deadlock as follows. The parent dir inode lock is taken when calling posix_acl_create -> get_acl -> ocfs2_iop_get_acl which takes the inode lock again. This can cause deadlock if there is a blocked remote lock request waiting for the lock to be downconverted. And same deadlock happened in ocfs2_reflink. This fix is to revert back using ocfs2_init_acl. Fixes: 702e5bc6 ("ocfs2: use generic posix ACL infrastructure") Signed-off-by:
Tariq Saeed <tariq.x.saeed@oracle.com> Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Junxiao Bi authored
[ Upstream commit 5ee0fbd5 ] Commit 743b5f14 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()") introduced this issue. ocfs2_setattr called by chmod command holds cluster wide inode lock when calling posix_acl_chmod. This latter function in turn calls ocfs2_iop_get_acl and ocfs2_iop_set_acl. These two are also called directly from vfs layer for getfacl/setfacl commands and therefore acquire the cluster wide inode lock. If a remote conversion request comes after the first inode lock in ocfs2_setattr, OCFS2_LOCK_BLOCKED will be set. And this will cause the second call to inode lock from the ocfs2_iop_get_acl() to block indefinetly. The deleted version of ocfs2_acl_chmod() calls __posix_acl_chmod() which does not call back into the filesystem. Therefore, we restore ocfs2_acl_chmod(), modify it slightly for locking as needed, and use that instead. Fixes: 743b5f14 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()") Signed-off-by:
-
Junxiao Bi authored
[ Upstream commit 854ee2e9 ] Commit 8f1eb487 ("ocfs2: fix umask ignored issue") introduced an issue, SGID of sub dir was not inherited from its parents dir. It is because SGID is set into "inode->i_mode" in ocfs2_get_init_inode(), but is overwritten by "mode" which don't have SGID set later. Fixes: 8f1eb487 ("ocfs2: fix umask ignored issue") Signed-off-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit ff0bd441 ] Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Wanpeng Li authored
[ Upstream commit f7c17d26 ] ------------[ cut here ]------------ WARNING: CPU: 0 PID: 16 at kernel/workqueue.c:4559 rebind_workers+0x1c0/0x1d0 Modules linked in: CPU: 0 PID: 16 Comm: cpuhp/0 Not tainted 4.6.0-rc4+ #31 Hardware name: IBM IBM System x3550 M4 Server -[7914IUW]-/00Y8603, BIOS -[D7E128FUS-1.40]- 07/23/2013 0000000000000000 ffff881037babb58 ffffffff8139d885 0000000000000010 0000000000000000 0000000000000000 0000000000000000 ffff881037babba8 ffffffff8108505d ffff881037ba0000 000011cf3e7d6e60 0000000000000046 Call Trace: dump_stack+0x89/0xd4 __warn+0xfd/0x120 warn_slowpath_null+0x1d/0x20 rebind_workers+0x1c0/0x1d0 workqueue_cpu_up_callback+0xf5/0x1d0 notifier_call_chain+0x64/0x90 ? trace_hardirqs_on_caller+0xf2/0x220 ? notify_prepare+0x80/0x80 __raw_notifier_call_chain+0xe/0x10 __cpu_notify+0x35/0x50 notify_down_prepare+0x5e/0x80 ? notify_prepare+0x80/0x80 cpuhp_invoke_callback+0x73/0x330 ? __schedule+0x33e/0x8a0 cpuhp_down_callbacks+0x51/0xc0 cpuhp_thread_fun+0xc1/0xf0 smpboot_thread_fn+0x159/0x2a0 ? smpboot_create_threads+0x80/0x80 kthread+0xef/0x110 ? wait_for_completion+0xf0/0x120 ? schedule_tail+0x35/0xf0 ret_from_fork+0x22/0x50 ? __init_kthread_worker+0x70/0x70 ---[ end trace eb12ae47d2382d8f ]--- notify_down_prepare: attempt to take down CPU 0 failed This bug can be reproduced by below config w/ nohz_full= all cpus: CONFIG_BOOTPARAM_HOTPLUG_CPU0=y CONFIG_DEBUG_HOTPLUG_CPU0=y CONFIG_NO_HZ_FULL=y As Thomas pointed out: | If a down prepare callback fails, then DOWN_FAILED is invoked for all | callbacks which have successfully executed DOWN_PREPARE. | | But, workqueue has actually two notifiers. One which handles | UP/DOWN_FAILED/ONLINE and one which handles DOWN_PREPARE. | | Now look at the priorities of those callbacks: | | CPU_PRI_WORKQUEUE_UP = 5 | CPU_PRI_WORKQUEUE_DOWN = -5 | | So the call order on DOWN_PREPARE is: | | CB 1 | CB ... | CB workqueue_up() -> Ignores DOWN_PREPARE | CB ... | CB X ---> Fails | | So we call up to CB X with DOWN_FAILED | | CB 1 | CB ... | CB workqueue_up() -> Handles DOWN_FAILED | CB ... | CB X-1 | | So the problem is that the workqueue stuff handles DOWN_FAILED in the up | callback, while it should do it in the down callback. Which is not a good idea | either because it wants to be called early on rollback... | | Brilliant stuff, isn't it? The hotplug rework will solve this problem because | the callbacks become symetric, but for the existing mess, we need some | workaround in the workqueue code. The boot CPU handles housekeeping duty(unbound timers, workqueues, timekeeping, ...) on behalf of full dynticks CPUs. It must remain online when nohz full is enabled. There is a priority set to every notifier_blocks: workqueue_cpu_up > tick_nohz_cpu_down > workqueue_cpu_down So tick_nohz_cpu_down callback failed when down prepare cpu 0, and notifier_blocks behind tick_nohz_cpu_down will not be called any more, which leads to workers are actually not unbound. Then hotplug state machine will fallback to undo and online cpu 0 again. Workers will be rebound unconditionally even if they are not unbound and trigger the warning in this progress. This patch fix it by catching !DISASSOCIATED to avoid rebind bound workers. Cc: Tejun Heo <tj@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: stable@vger.kernel.org Suggested-by:
Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Steven Rostedt authored
[ Upstream commit 106b816c ] At the end of process_filter(), collapse_tree() was changed to update the parg parameter, but the reassignment after the call wasn't removed. What happens is that the "current_op" gets modified and freed and parg is assigned to the new allocated argument. But after the call to collapse_tree(), parg is assigned again to the just freed "current_op", and this causes the tool to crash. The current_op variable must also be assigned to NULL in case of error, otherwise it will cause it to be free()ed twice. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org # 3.14+ Fixes: 42d6194d ("tools lib traceevent: Refactor process_filter()") Link: http://lkml.kernel.org/r/20160511150936.678c18a1@gandalf.local.homeSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Alexander Shishkin authored
[ Upstream commit 9f448cd3 ] When the PMU driver reports a truncated AUX record, it effectively means that there is no more usable room in the event's AUX buffer (even though there may still be some room, so that perf_aux_output_begin() doesn't take action). At this point the consumer still has to be woken up and the event has to be disabled, otherwise the event will just keep spinning between perf_aux_output_begin() and perf_aux_output_end() until its context gets unscheduled. Again, for cpu-wide events this means never, so once in this condition, they will be forever losing data. Fix this by disabling the event and waking up the consumer in case of a truncated AUX record. Reported-by:
-
Takashi Iwai authored
[ Upstream commit 84add303 ] Phoenix Audio has yet another device with another id (even a different vendor id, 0556:0014) that requires the same quirk for the sample rate. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110221 Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Yura Pakhuchiy authored
[ Upstream commit 3231e205 ] Subwoofer does not work out of the box on ASUS N751/N551 laptops. This patch fixes it. Patch tested on N751 laptop. N551 part is not tested, but according to [1] and [2] this laptop requires similar changes, so I included them in the patch. 1. https://github.com/honsiorovskyi/asus-n551-hda-fix 2. https://bugs.launchpad.net/ubuntu/+source/alsa-tools/+bug/1405691 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117781Signed-off-by:
Yura Pakhuchiy <pakhuchiy@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Bobi Mihalca authored
[ Upstream commit 9d4dc584 ] For reducing the noise from the headphone output on ASUS N750JV, call the existing fixup, alc_fixup_auto_mute_via_amp(), additionally. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181Signed-off-by:
Bobi Mihalca <bobbymihalca@touchtech.ro> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Bobi Mihalca authored
[ Upstream commit 70cf2cbd ] ASUS N750JV needs the same fixup as N550 for enabling its subwoofer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit addacd80 ] The HD-audio reconfig function got broken in the recent kernels, typically resulting in a failure like: snd_hda_intel 0000:00:1b.0: control 3:0:0:Playback Channel Map:0 is already present This is because of the code restructuring to move the PCM and control instantiation into the codec drive probe, by the commit [bcd96557: ALSA: hda - Build PCMs and controls at codec driver probe]. Although the commit above removed the calls of snd_hda_codec_build_pcms() and *_build_controls() at the controller driver probe, the similar calls in the reconfig were still left forgotten. This caused the conflicting and duplicated PCMs and controls. The fix is trivial: just remove these superfluous calls from reconfig_codec(). Fixes: bcd96557 ('ALSA: hda - Build PCMs and controls at codec driver probe') Reported-by:
Jochen Henneberg <jh@henneberg-systemdesign.com> Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by:
-
Daniel Vetter authored
[ Upstream commit 2700818a ] LPT is pch, so might run into the fdi bandwidth constraint (especially since it has only 2 lanes). But right now we just force pipe_bpp back to 24, resulting in a nice loop (which we bail out with a loud WARN_ON). Fix this. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=93477Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Tested-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462264381-7573-1-git-send-email-daniel.vetter@ffwll.ch (cherry picked from commit f58a1acc) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 6ae645d5 ] NULL pointer derefence happens when booting with DTB because the platform data for haptic device is not set in supplied data from parent MFD device. The MFD device creates only platform data (from Device Tree) for itself, not for haptic child. Unable to handle kernel NULL pointer dereference at virtual address 0000009c pgd = c0004000 [0000009c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM (max8997_haptic_probe) from [<c03f9cec>] (platform_drv_probe+0x4c/0xb0) (platform_drv_probe) from [<c03f8440>] (driver_probe_device+0x214/0x2c0) (driver_probe_device) from [<c03f8598>] (__driver_attach+0xac/0xb0) (__driver_attach) from [<c03f67ac>] (bus_for_each_dev+0x68/0x9c) (bus_for_each_dev) from [<c03f7a38>] (bus_add_driver+0x1a0/0x218) (bus_add_driver) from [<c03f8db0>] (driver_register+0x78/0xf8) (driver_register) from [<c0101774>] (do_one_initcall+0x90/0x1d8) (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc) (kernel_init_freeable) from [<c06bb5b4>] (kernel_init+0x8/0x114) (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c) Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Cc: <stable@vger.kernel.org> Fixes: 104594b0 ("Input: add driver support for MAX8997-haptic") [k.kozlowski: Write commit message, add CC-stable] Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Kaho Ng authored
[ Upstream commit 2da2dc9e ] For reducing the noise from the headset output on ASUS UX501VW, call the existing fixup, alc_fixup_headset_mode_alc668(), additionally. Thread: https://bbs.archlinux.org/viewtopic.php?id=209554Signed-off-by:
Kaho Ng <ngkaho1234@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Bobi Mihalca authored
[ Upstream commit 83a9efb5 ] Apply the new fixup that is used for ASUS N750JV to another similar model, N500JV, too, for reducing the headphone noise. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181Signed-off-by:
-
Al Viro authored
[ Upstream commit 99d82582 ] Payloads of NM entries are not supposed to contain NUL. When we run into such, only the part prior to the first NUL goes into the concatenation (i.e. the directory entry name being encoded by a bunch of NM entries). We do stop when the amount collected so far + the claimed amount in the current NM entry exceed 254. So far, so good, but what we return as the total length is the sum of *claimed* sizes, not the actual amount collected. And that can grow pretty large - not unlimited, since you'd need to put CE entries in between to be able to get more than the maximum that could be contained in one isofs directory entry / continuation chunk and we are stop once we'd encountered 32 CEs, but you can get about 8Kb easily. And that's what will be passed to readdir callback as the name length. 8Kb __copy_to_user() from a buffer allocated by __get_free_page() Cc: stable@vger.kernel.org # 0.98pl6+ (yes, really) Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Dmitry V. Levin authored
[ Upstream commit f0b22d1b ] Do not load one entry beyond the end of the syscall table when the syscall number of a traced process equals to __NR_Linux_syscalls. Similar bug with regular processes was fixed by commit 3bb457af ("[PARISC] Fix bug when syscall nr is __NR_Linux_syscalls"). This bug was found by strace test suite. Cc: stable@vger.kernel.org Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Chen Yu authored
[ Upstream commit 886123fb ] Currently we read the tsc radio: ratio = (MSR_PLATFORM_INFO >> 8) & 0x1f; Thus we get bit 8-12 of MSR_PLATFORM_INFO, however according to the SDM (35.5), the ratio bits are bit 8-15. Ignoring the upper bits can result in an incorrect tsc ratio, which causes the TSC calibration and the Local APIC timer frequency to be incorrect. Fix this problem by masking 0xff instead. [ tglx: Massaged changelog ] Fixes: 7da7c156 "x86, tsc: Add static (MSR) TSC calibration on Intel Atom SoCs" Signed-off-by:
Chen Yu <yu.c.chen@intel.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: stable@vger.kernel.org Cc: Bin Gao <bin.gao@intel.com> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1462505619-5516-1-git-send-email-yu.c.chen@intel.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Hugh Dickins authored
[ Upstream commit 14af4a5e ] /proc/sys/vm/stat_refresh warns nr_isolated_anon and nr_isolated_file go increasingly negative under compaction: which would add delay when should be none, or no delay when should delay. The bug in compaction was due to a recent mmotm patch, but much older instance of the bug was also noticed in isolate_migratepages_range() which is used for CMA and gigantic hugepage allocations. The bug is caused by putback_movable_pages() in an error path decrementing the isolated counters without them being previously incremented by acct_isolated(). Fix isolate_migratepages_range() by removing the error-path putback, thus reaching acct_isolated() with migratepages still isolated, and leaving putback to caller like most other places do. Fixes: edc2ca61 ("mm, compaction: move pageblock checks up from isolate_migratepages_range()") [vbabka@suse.cz: expanded the changelog] Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Arindam Nath authored
[ Upstream commit 1a738347 ] There is an issue observed when we hotplug a second DP 4K monitor to the system. Sometimes, the link training fails for the second monitor after HPD interrupt generation. The issue happens when some queued or deferred transactions are already present on the AUX channel when we initiate a new transcation to (say) get DPCD or during link training. We set AUX_IGNORE_HPD_DISCON bit in the AUX_CONTROL register so that we can ignore any such deferred transactions when a new AUX transaction is initiated. Signed-off-by:
Arindam Nath <arindam.nath@amd.com> Reviewed-by:
-
Eric W. Biederman authored
[ Upstream commit 5ec0811d ] When the first propgated copy was a slave the following oops would result: > BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 > IP: [<ffffffff811fba4e>] propagate_one+0xbe/0x1c0 > PGD bacd4067 PUD bac66067 PMD 0 > Oops: 0000 [#1] SMP > Modules linked in: > CPU: 1 PID: 824 Comm: mount Not tainted 4.6.0-rc5userns+ #1523 > Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 > task: ffff8800bb0a8000 ti: ffff8800bac3c000 task.ti: ffff8800bac3c000 > RIP: 0010:[<ffffffff811fba4e>] [<ffffffff811fba4e>] propagate_one+0xbe/0x1c0 > RSP: 0018:ffff8800bac3fd38 EFLAGS: 00010283 > RAX: 0000000000000000 RBX: ffff8800bb77ec00 RCX: 0000000000000010 > RDX: 0000000000000000 RSI: ffff8800bb58c000 RDI: ffff8800bb58c480 > RBP: ffff8800bac3fd48 R08: 0000000000000001 R09: 0000000000000000 > R10: 0000000000001ca1 R11: 0000000000001c9d R12: 0000000000000000 > R13: ffff8800ba713800 R14: ffff8800bac3fda0 R15: ffff8800bb77ec00 > FS: 00007f3c0cd9b7e0(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 0000000000000010 CR3: 00000000bb79d000 CR4: 00000000000006e0 > Stack: > ffff8800bb77ec00 0000000000000000 ffff8800bac3fd88 ffffffff811fbf85 > ffff8800bac3fd98 ffff8800bb77f080 ffff8800ba713800 ffff8800bb262b40 > 0000000000000000 0000000000000000 ffff8800bac3fdd8 ffffffff811f1da0 > Call Trace: > [<ffffffff811fbf85>] propagate_mnt+0x105/0x140 > [<ffffffff811f1da0>] attach_recursive_mnt+0x120/0x1e0 > [<ffffffff811f1ec3>] graft_tree+0x63/0x70 > [<ffffffff811f1f6b>] do_add_mount+0x9b/0x100 > [<ffffffff811f2c1a>] do_mount+0x2aa/0xdf0 > [<ffffffff8117efbe>] ? strndup_user+0x4e/0x70 > [<ffffffff811f3a45>] SyS_mount+0x75/0xc0 > [<ffffffff8100242b>] do_syscall_64+0x4b/0xa0 > [<ffffffff81988f3c>] entry_SYSCALL64_slow_path+0x25/0x25 > Code: 00 00 75 ec 48 89 0d 02 22 22 01 8b 89 10 01 00 00 48 89 05 fd 21 22 01 39 8e 10 01 00 00 0f 84 e0 00 00 00 48 8b 80 d8 00 00 00 <48> 8b 50 10 48 89 05 df 21 22 01 48 89 15 d0 21 22 01 8b 53 30 > RIP [<ffffffff811fba4e>] propagate_one+0xbe/0x1c0 > RSP <ffff8800bac3fd38> > CR2: 0000000000000010 > ---[ end trace 2725ecd95164f217 ]--- This oops happens with the namespace_sem held and can be triggered by non-root users. An all around not pleasant experience. To avoid this scenario when finding the appropriate source mount to copy stop the walk up the mnt_master chain when the first source mount is encountered. Further rewrite the walk up the last_source mnt_master chain so that it is clear what is going on. The reason why the first source mount is special is that it it's mnt_parent is not a mount in the dest_mnt propagation tree, and as such termination conditions based up on the dest_mnt mount propgation tree do not make sense. To avoid other kinds of confusion last_dest is not changed when computing last_source. last_dest is only used once in propagate_one and that is above the point of the code being modified, so changing the global variable is meaningless and confusing. Cc: stable@vger.kernel.org fixes: f2ebb3a9 ("smarter propagate_mnt()") Reported-by:
Tycho Andersen <tycho.andersen@canonical.com> Reviewed-by:
Seth Forshee <seth.forshee@canonical.com> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Maxim Patlasov authored
[ Upstream commit 7ae8fd03 ] propagate_one(m) calculates "type" argument for copy_tree() like this: > if (m->mnt_group_id == last_dest->mnt_group_id) { > type = CL_MAKE_SHARED; > } else { > type = CL_SLAVE; > if (IS_MNT_SHARED(m)) > type |= CL_MAKE_SHARED; > } The "type" argument then governs clone_mnt() behavior with respect to flags and mnt_master of new mount. When we iterate through a slave group, it is possible that both current "m" and "last_dest" are not shared (although, both are slaves, i.e. have non-NULL mnt_master-s). Then the comparison above erroneously makes new mount shared and sets its mnt_master to last_source->mnt_master. The patch fixes the problem by handling zero mnt_group_id-s as though they are unequal. The similar problem exists in the implementation of "else" clause above when we have to ascend upward in the master/slave tree by calling: > last_source = last_source->mnt_master; > last_dest = last_source->mnt_parent; proper number of times. The last step is governed by "n->mnt_group_id != last_dest->mnt_group_id" condition that may lie if both are zero. The patch fixes this case in the same way as the former one. [AV: don't open-code an obvious helper...] Signed-off-by:
Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by:
-
Wang YanQing authored
[ Upstream commit c10fcb14 ] The code for checking whether a BAR address range is valid will break out of the loop when a start address of 0x0 is encountered. This behaviour is wrong since by breaking out of the loop we may miss the BAR that describes the EFI frame buffer in a later iteration. Because of this bug I can't use video=efifb: boot parameter to get efifb on my new ThinkPad E550 for my old linux system hard disk with 3.10 kernel. In 3.10, efifb is the only choice due to DRM/I915 not supporting the GPU. This patch also add a trivial optimization to break out after we find the frame buffer address range without testing later BARs. Signed-off-by:
Wang YanQing <udknight@gmail.com> [ Rewrote changelog. ] Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Reviewed-by:
Peter Jones <pjones@redhat.com> Cc: <stable@vger.kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1462454061-21561-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
-
Herbert Xu authored
[ Upstream commit 13f4bb78 ] The crypto hash walk code is broken when supplied with an offset greater than or equal to PAGE_SIZE. This patch fixes it by adjusting walk->pg and walk->offset when this happens. Cc: <stable@vger.kernel.org> Reported-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Prarit Bhargava authored
[ Upstream commit 93d68841 ] ACPICA commit 7a3bd2d962f221809f25ddb826c9e551b916eb25 Set the mutex owner thread ID. Original patch from: Prarit Bhargava <prarit@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=115121 Link: https://github.com/acpica/acpica/commit/7a3bd2d9Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Tested-by: Andy Lutomirski <luto@kernel.org> # On a Dell XPS 13 9350 Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
