- 05 Dec, 2007 26 commits
-
-
Bryan Wu authored
Signed-off-by:
Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Bryan Wu authored
Signed-off-by:
-
Sonic Zhang authored
Set correct baud for spi mmc and enable SPI only after DMA is started. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Bryan Wu authored
Move cs_chg_udelay handling (specific to this driver) to cs_deactive(), fixing a bug when some SPI LCD driver needs delay after cs_deactive. Fix bug reported by Cameron Barfield <cbarfield@cyberdata.net> https://blackfin.uclinux.org/gf/project/uclinux-dist/forum/?action=ForumBrowse&forum_id=39&_forum_action=ForumMessageBrowse&thread_id=23630&feedback=Message%20replied. Cc: Cameron Barfield <cbarfield@cyberdata.net> Signed-off-by:
-
Bryan Wu authored
Fix bug in u16_cs_chg_reader to read data_len-2 bytes data firstly, then read out the last 2 bytes data Signed-off-by:
-
Bryan Wu authored
Move global SPI regs_base and dma_ch to struct driver_data. Test on BF54x SPI Flash with 2 spi_master devices enabled. Signed-off-by:
-
Sonic Zhang authored
Move spin/waits to more correct locations in bfin SPI driver. Signed-off-by:
-
Sonic Zhang authored
Fix SPI driver to work with SPI flash ST M25P16 on bf548 Currently the SPI driver enables the SPI controller and sets the SPI baud register for each SPI transfer. But they should never be changed within a SPI message session, in which several SPI transfers are pumped. This patch moves SPI setting to the begining of a message session, and never disables SPI controller until an error occurs. Signed-off-by:
-
Sonic Zhang authored
Move pin muxing to setup and cleanup methods. Signed-off-by:
-
Sonic Zhang authored
Use portmux mechanism to support SPI busses 1 and 2, instead of just the original bus 0. Signed-off-by:
-
Bryan Wu authored
Update spi driver to support multi-ports by using platform resources; tested on STAMP537+SPI_MMC, other boards need more testing. Plus other minor updates. Signed-off-by:
-
Mike Frysinger authored
Prevent people from setting bits in ctl_reg that the SPI framework already handles, hopefully we can one day drop ctl_reg completely Signed-off-by:
Mike Frysinger <michael.frysinger@analog.com> Signed-off-by:
-
Bryan Wu authored
Respect per-transfer cs_change field (protocol tweaking support) by adding and using cs_active/cs_deactive functions. Signed-off-by:
-
Bryan Wu authored
Cleanup and error handling - add error handling in SPI bus driver with selecting clients - use proper defines to access Blackfin MMRs - remove useless SSYNCs - cleaner use of portmux calls Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Michael Hennerich authored
Use new Blackfin portmux interface, add error handling. Signed-off-by:
-
Bryan Wu authored
Initial BF54x SPI support - support BF54x SPI0 - clean up some code (whitespace etc) - will support multiports in the future - start using portmux calls Signed-off-by:
-
Marc Pignat authored
Given the patch which simplifies the spi_sync calling convention, this one updates the callers of that routine which tried using it according to the previous specification. (Most didn't.) Signed-off-by:
Marc Pignat <marc.pignat@hevs.ch> Signed-off-by:
-
Marc Pignat authored
Simplify spi_sync calling convention, eliminating the need to check both the return value AND the message->status. In consequence, this corrects misbehaviours of spi_read and spi_write (which only checked the former) and their callers. Signed-off-by:
-
David Brownell authored
Add comment to at25 driver that it's for EEPROM chips, not FLASH chips ... the AT25 series has both types of chip, and sometimes they're even pin-compatible. The command sets are different, as is the treatment of erasure. (FLASH needs explicit erasure, but with EEPROM it's implicit.) Note that all vendors seem to have this same confusion in their *25* series SPI memory parts. Signed-off-by:
-
David Brownell authored
Make spi_write_then_read() use a mutex not a binary semaphore. Signed-off-by:
-
Tetsuo Handa authored
mm/slub.c exports ksize(), but mm/slob.c and mm/slab.c don't. It's used by binfmt_flat, which can be built as a module. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Christoph Lameter <clameter@sgi.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Denis Cheng authored
this call should use the array index j, not i. But with this approach, just one int i is enough, int j is not needed. Signed-off-by:
Denis Cheng <crquan@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Evgeniy Dushistov authored
This patch fixes regression, introduced since 2.6.16. NextStep variant of UFS as OpenStep uses directory block size equals to 1024. Without this change, ufs_check_page fails in many cases. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Evgeniy Dushistov <dushistov@mail.ru> Cc: Dave Bailey <dsbailey@pacbell.net> Signed-off-by:
-
Jiri Kosina authored
We must make sure that the RTC_DEV_BUSY flag has proper lock semantics, i.e. that the RTC_DEV_BUSY stores clearing the flag don't get reordered before the preceeding stores and loads and vice versa. Spotted by Nick Piggin. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: David Brownell <david-b@pacbell.net> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Eric W. Biederman authored
Currently we are complicating the code in copy_process, the clone ABI, and if we fix the bugs sys_setsid itself, with an unnecessary open coded version of sys_setsid. So just simplify everything and don't special case the session and pgrp of the initial process in a pid namespace. Having this special case actually presents to user space the classic linux startup conditions with session == pgrp == 0 for /sbin/init. We already handle sending signals to processes in a child pid namespace. We need to handle sending signals to processes in a parent pid namespace for cases like SIGCHILD and SIGIO. This makes nothing extra visible inside a pid namespace. So this extra special case appears to have no redeeming merits. Further removing this special case increases the flexibility of how we can use pid namespaces, by not requiring the initial process in a pid namespace to be a daemon. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by:
-
Jeff Moyer authored
On 2.6.24, top started showing 100% iowait on one CPU when a UML instance was running (but completely idle). The UML code sits in io_getevents waiting for an event to be submitted and completed. Fix this by checking ctx->reqs_active before scheduling to determine whether or not we are waiting for I/O. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Jeff Dike <jdike@addtoit.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
- 04 Dec, 2007 14 commits
-
-
Linus Torvalds authored
* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: PHY: Add the phy_device_release device method. gianfar: fix compile warning pasemi_mac: Fix reuse of free'd skb SMC911X: Fix using of dereferenced skb after netif_rx sky2: recovery deadlock fix Fix memory corruption in fec_mpc52xx Don't claim to do IPv6 checksum offload cxgb - revert file mode changes.
-
Anton Vorontsov authored
Lately I've got this nice badness on mdio bus removal: Device 'e0103120:06' does not have a release() function, it is broken and must be fixed. ------------[ cut here ]------------ Badness at drivers/base/core.c:107 NIP: c015c1a8 LR: c015c1a8 CTR: c0157488 REGS: c34bdcf0 TRAP: 0700 Not tainted (2.6.23-rc5-g9ebadfbb-dirty) MSR: 00029032 <EE,ME,IR,DR> CR: 24088422 XER: 00000000 ... [c34bdda0] [c015c1a8] device_release+0x78/0x80 (unreliable) [c34bddb0] [c01354cc] kobject_cleanup+0x80/0xbc [c34bddd0] [c01365f0] kref_put+0x54/0x6c [c34bdde0] [c013543c] kobject_put+0x24/0x34 [c34bddf0] [c015c384] put_device+0x1c/0x2c [c34bde00] [c0180e84] mdiobus_unregister+0x2c/0x58 ... Though actually there is nothing broken, it just device subsystem core expects another "pattern" of resource managment. This patch implement phy device's release function, thus we're getting rid of this badness. Also small hidden bug fixed, hope none other introduced. ;-) Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by:
Andy Fleming <afleming@freescale.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Grant Likely authored
Eliminate an uninitialized variable warning. The code is correct, but a pointer to the automatic variable 'addr' is passed to dma_alloc_coherent. Since addr has never been initialized, and the compiler doesn't know what dma_alloc_coherent will do with it, it complains. Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Olof Johansson authored
Turns out we're freeing the skb when we detect CRC error, but we're not clearing out info->skb. We could either clear it and have the stack reallocate it, or just leave it and the rx ring refill code will reuse the one that was allocated. Reusing a freed skb obviously caused some nasty crashes of various kind, as reported by Brent Baude and David Woodhouse. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Wang Chen authored
Signed-off-by:
Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by:
-
Stephen Hemminger authored
Prevent deadlock in sky2 recovery logic. sky2_down calls napi_synchronize which gets stuck if napi was already disabled. Fix by rearranging slightly and not calling napi_disable until after both ports are stopped. The napi_disable probably is being overly paranoid, but it is safe now. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Jon Smirl authored
The mpc5200 fec driver is corrupting memory. This patch fixes two bugs where the wrong skb was being referenced. Signed-off-by:
Jon Smirl <jonsmirl@gmail.com> Acked-by:
Domen Puncer <domen.puncer@telargo.com> Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
David Woodhouse authored
Signed-off-by:
-
Divy Le Ray authored
revert inavertant file mode changes Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
* Don't program UDMA timings when programming PIO or MWDMA modes. This has also a nice side-effect of fixing regression added by commit 681c80b5 ("libata: correct handling of SRST reset sequences") (->set_piomode method for PIO0 is called before ->cable_detect method which checks UDMA timings to get the cable type). * Bump driver version. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Tested-by:
"Thomas Lindroth" <thomas.lindroth@gmail.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by:
-
peerchen authored
Add the device IDs of legacy mode of MCP79 AHCI controller to ahci.c Signed-off-by:
Peer Chen <peerchen@gmail.com> Signed-off-by:
-
Mark Lord authored
The Highpoint RocketRAID boards using Marvell 7042 chips overwrite the 9th sector of attached drives at boot time, when those drives are configured as "Legacy" (the default) in the HighPoint BIOS. This kills GRUB, and probably other stuff. But it all happens *before* Linux is even loaded. So, for now we'll log a WARNING when such boards are detected, and advise users to configure BIOS "JBOD" volumes instead, which don't appear to suffer from this problem. Signed-off-by:
Mark Lord <mlord@pobox.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Robert Hancock authored
We need to run any DMA command with result taskfile requested in ADMA mode when the port is in ADMA mode, otherwise it may try to use the legacy DMA engine in ADMA mode which is not allowed. Enforce this with BUG_ON() since data corruption could potentially result if this happened. Also, fail any attempt to try and issue NCQ commands with result taskfile requested, since the hardware doesn't allow this. Signed-off-by:
Robert Hancock <hancockr@shaw.ca> Signed-off-by:
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Make sure the restore psw masks are initialized. [S390] Fix compile error on 31bit without preemption [S390] dcssblk: prevent early access without own make_request function [S390] cio: add missing reprobe loop end statement [S390] cio: Issue SenseID per path.
-
