- 06 May, 2021 1 commit
-
-
Hui Wang authored
Without this change, the DAC ctl's name could be changed only when the machine has both Speaker and Headphone, but we met some machines which only has Lineout and Headhpone, and the Lineout and Headphone share the Audio Mixer0 and DAC0, the ctl's name is set to "Front". On most of machines, the "Front" is used for Speaker only or Lineout only, but on this machine it is shared by Lineout and Headphone, This introduces an issue in the pipewire and pulseaudio, suppose users want the Headphone to be on and the Speaker/Lineout to be off, they could turn off the "Front", this works on most of the machines, but on this machine, the "Front" couldn't be turned off otherwise the headphone will be off too. Here we do some change to let the ctl's name change to "Headphone+LO" on this machine, and pipewire and pulseaudio already could handle "Headphone+LO" and "Speaker+LO". (https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/747) BugLink: http://bugs.launchpad.net/bugs/804178Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210504073917.22406-1-hui.wang@canonical.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 04 May, 2021 3 commits
-
-
Takashi Iwai authored
HP OMEN dc0019-ur with codec SSID 103c:84da requires the pin config overrides and the existing mic/mute LED setup. This patch implements those in the fixup table. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212733 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210504121832.4558-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
HP Envy AiO 32-a12xxx has an external amp that is controlled via GPIO bit 0x04. However, unlike other devices, this amp seems to shut down itself after the certain period, hence the OS needs to up/down the bit dynamically only during the actual playback. This patch adds the control of the GPIO bit via the existing pcm_hook mechanism. Ideally it should be triggered at the actual stream start, but we have only the state change at prepare/cleanup, so use those for switching the GPIO bit on/off. This should be good enough for the purpose, and was actually confirmed to work fine. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212873 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210504091802.13200-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
It was reported that the headphone output on ASUS UX430UA (SSID 1043:1740) with ALC295 codec is silent while the speaker works. After the investigation, it turned out that the DAC assignment has to be fixed on this machine; unlike others, it expects DAC 0x02 to be assigned to the speaker pin 0x07 while DAC 0x03 to headphone pin 0x21. This patch provides a fixup for the fixed DAC/pin mapping for this device. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212933 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210504082057.6913-1-tiwai@suse.deSigned-off-by:
-
- 03 May, 2021 2 commits
-
-
Timo Gurr authored
The decibel volume range contains a negative maximum value resulting in pipewire complaining about the device and effectivly having no sound output. The wrong values also resulted in the headset sounding muted already at a mixer level of about ~25%. PipeWire BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/1049 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212897Signed-off-by:
Timo Gurr <timo.gurr@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503110822.10222-1-tiwai@suse.deSigned-off-by:
-
Sami Loone authored
In 9bbb94e5 ("ALSA: hda/realtek: fix static noise on ALC285 Lenovo laptops") an existing Lenovo quirk was made more generic by removing a 0x12 pin requirement from the entry. This made the second chance table Thinkpad jack entry unreachable as the pin configurations became identical. Revert the 0x12 pin requirement removal and move Thinkpad jack pin quirk back to the primary pin table as they can co-exist when more specific configurations come first. Add a more targeted pin quirk for Lenovo devices that have 0x12 as 0x40000000. Tested on Yoga 6 (AMD) laptop. [ Corrected the commit ID -- tiwai ] Fixes: 9bbb94e5 ("ALSA: hda/realtek: fix static noise on ALC285 Lenovo laptops") Signed-off-by:
Sami Loone <sami@loone.fi> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/YI0oefvTYn8URYDb@yogaSigned-off-by:
-
- 28 Apr, 2021 15 commits
-
-
Takashi Iwai authored
Just re-order the cx5066_fixups[] entries for HP devices for avoiding the oversight of the duplicated or unapplied item in future. No functional changes. Also Cc-to-stable for the further patch applications. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428112704.23967-14-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The quirk entry for Uniwill ECS M31EI is with the PCI SSID device 0, which means matching with all. That is, it's essentially equivalent with SND_PCI_QUIRK_VENDOR(0x1584), which also matches with the previous entry for Haier W18 applying the very same quirk. Let's unify them with the single vendor-quirk entry. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428112704.23967-13-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Just re-order the alc662_fixup_tbl[] entries for Acer and ASUS devices for avoiding the oversight of the duplicated or unapplied item in future. No functional changes. Also Cc-to-stable for the further patch applications. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428112704.23967-12-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Just re-order the alc269_fixup_tbl[] entries for FSC, Medion, Samsung and Lemote devices for avoiding the oversight of the duplicated or unapplied item in future. No functional changes. Also Cc-to-stable for the further patch applications. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428112704.23967-11-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Just re-order the alc269_fixup_tbl[] entries for Lenovo devices for avoiding the oversight of the duplicated or unapplied item in future. No functional changes. Also Cc-to-stable for the further patch applications. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428112704.23967-10-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Just re-order the alc269_fixup_tbl[] entries for Sony devices for avoiding the oversight of the duplicated or unapplied item in future. No functional changes. Also Cc-to-stable for the further patch applications. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428112704.23967-9-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Just re-order the alc269_fixup_tbl[] entries for ASUS devices for avoiding the oversight of the duplicated or unapplied item in future. No functional changes. Also Cc-to-stable for the further patch applications. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428112704.23967-8-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Just re-order the alc269_fixup_tbl[] entries for Dell devices for avoiding the oversight of the duplicated or unapplied item in future. No functional changes. Also Cc-to-stable for the further patch applications. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428112704.23967-7-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Just re-order the alc269_fixup_tbl[] entries for Acer devices for avoiding the oversight of the duplicated or unapplied item in future. No functional changes. Also Cc-to-stable for the further patch applications. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428112704.23967-6-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Just re-order the alc269_fixup_tbl[] entries for HP devices for avoiding the oversight of the duplicated or unapplied item in future. No functional changes. Formerly, some entries were grouped for the actual codec, but this doesn't seem reasonable to keep in that way. So now we simply keep the PCI SSID order for the whole. Also Cc-to-stable for the further patch applications. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428112704.23967-5-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Just re-order the alc882_fixup_tbl[] entries for Clevo devices for avoiding the oversight of the duplicated or unapplied item in future. No functional changes. Also, user lower hex letters in the entry. Also Cc-to-stable for the further patch applications. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428112704.23967-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Just re-order the alc882_fixup_tbl[] entries for Sony devices for avoiding the oversight of the duplicated or unapplied item in future. No functional changes. Also Cc-to-stable for the further patch applications. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428112704.23967-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Just re-order the alc882_fixup_tbl[] entries for Acer devices for avoiding the oversight of the duplicated or unapplied item in future. No functional changes. Also Cc-to-stable for the further patch applications. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428112704.23967-2-tiwai@suse.deSigned-off-by:
-
Jiapeng Chong authored
Variable len is set to zero but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Cleans up the following clang-analyzer warning: sound/usb/mixer.c:2713:3: warning: Value stored to 'len' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/1619519194-57806-1-git-send-email-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
Eckhart Mohr authored
This applies a SND_PCI_QUIRK(...) to the Clevo PCx0Dx barebones. This fix enables audio output over the headset jack and ensures that a microphone connected via the headset combo jack is correctly recognized when pluged in. [ Rearranged the list entries in a sorted order -- tiwai ] Signed-off-by:
Eckhart Mohr <e.mohr@tuxedocomputers.com> Co-developed-by:
Werner Sembach <wse@tuxedocomputers.com> Signed-off-by:
-
- 27 Apr, 2021 1 commit
-
-
Pierre-Louis Bossart authored
make W=1 warning: sound/virtio/virtio_ctl_msg.c:70: warning: expecting prototype for virtsnd_ctl_msg_request(). Prototype was for virtsnd_ctl_msg_response() instead Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210426213902.234711-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
- 26 Apr, 2021 7 commits
-
-
Stefan Binding authored
Cracking noises have been reported on the built-in speaker for certain Bullseye platforms, when volume is > 80%. This issue is caused by the specific combination of Codec and AMP in this platform, and cannot be fixed by the AMP, so indead must be fixed at codec level, by adding attenuation to the volume. Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500 Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by:
Vitaly Rodionov <vitalyr@opensource.cirrus.com> BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1924997Reported-and-tested-by:
You-Sheng Yang <vicamo.yang@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210426163749.196153-3-vitalyr@opensource.cirrus.comSigned-off-by:
-
Stefan Binding authored
After booting for first time on Bullseye, the DMIC is currently muted. Instead, the DMIC volume should be set to a valid initial value. Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500 Signed-off-by:
-
Lv Yunlong authored
In snd_sb_qsound_build, snd_ctl_add(..,p->qsound_switch...) and snd_ctl_add(..,p->qsound_space..) are called. But the second arguments of snd_ctl_add() could be freed via snd_ctl_add_replace() ->snd_ctl_free_one(). After the error code is returned, snd_sb_qsound_destroy(p) is called in __error branch. But in snd_sb_qsound_destroy(), the freed p->qsound_switch and p->qsound_space are still used by snd_ctl_remove(). My patch set p->qsound_switch and p->qsound_space to NULL if snd_ctl_add() failed to avoid the uaf bugs. But these codes need to further be improved with the code style. Signed-off-by:
Lv Yunlong <lyl2019@mail.ustc.edu.cn> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210426145541.8070-1-lyl2019@mail.ustc.edu.cnSigned-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-v5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.13 A lot of changes here for quite a quiet release in subsystem terms - there's been a lot of fixes and cleanups all over the subsystem both from generic work and from people working on specific drivers. - More cleanup and consolidation work in the core and the generic card drivers from Morimoto-san. - Lots of cppcheck fixes for Pierre-Louis Brossart. - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358 accessory detection, and Realtek RT1019, RT1316, RT711 and RT715.
-
Lv Yunlong authored
Our code analyzer reported a uaf. In snd_emu8000_create_mixer, the callee snd_ctl_add(..,emu->controls[i]) calls snd_ctl_add_replace(.., kcontrol,..). Inside snd_ctl_add_replace(), if error happens, kcontrol will be freed by snd_ctl_free_one(kcontrol). Then emu->controls[i] points to a freed memory, and the execution comes to __error branch of snd_emu8000_create_mixer. The freed emu->controls[i] is used in snd_ctl_remove(card, emu->controls[i]). My patch set emu->controls[i] to NULL if snd_ctl_add() failed to avoid the uaf. Signed-off-by:
-
Sami Loone authored
Remove a duplicate vendor+subvendor pin fixup entry as one is masking the other and making it unreachable. Consider the more specific newcomer as a second chance instead. The generic entry is made less strict to also match for laptops with slightly different 0x12 pin configuration. Tested on Lenovo Yoga 6 (AMD) where 0x12 is 0x40000000. Fixes: 607184cb ("ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button") Signed-off-by:
-
Takashi Iwai authored
The recent endpoint management change for implicit feedback mode added a clearance of ep->sync_sink (formerly ep->sync_slave) pointer at snd_usb_endpoint_stop() to assure no leftover for the feedback from the already stopped capture stream. This turned out to cause a regression, however, when full-duplex streams were running and only a capture was stopped. Because of the above clearance of ep->sync_sink pointer, no more feedback is done, hence the playback will stall. This patch fixes the ep->sync_sink clearance to be done only after all endpoints are released, for addressing the regression. Reported-and-tested-by:
Lucas Endres <jaffa225man@gmail.com> Fixes: bf6313a0 ("ALSA: usb-audio: Refactor endpoint management") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210426063349.18601-1-tiwai@suse.deSigned-off-by:
-
- 23 Apr, 2021 10 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
A KernelCI bisection identified 59c35c44 "ASoC: simple-card: add simple_parse_node()" as causing simple-card to fail to instantiate on kontron-sl28-var3-ads2 systems. Since the merge window is expected to open over the weekend drop that commit and subsequent ones which depend on it for now in case other systems are affected too. The boot log showed the error as: <4>[ 9.948821] sysfs: cannot create duplicate filename '/devices/platform/sound/(null)-wm8904-hifi' (backtrace) <3>[ 10.191982] kobject_add_internal failed for (null)-wm8904-hifi with -EEXIST, don't try to register things with the same name in the same directory. The dropped commits are: 73371bac "ASoC: audio-graph: tidyup graph_dai_link_of_dpcm()" 43439227 "ASoC: simple-card: add simple_link_init()" 59c35c44 "ASoC: simple-card: add simple_parse_node()" Reported-by:
Guillaume Tucker <guillaume.tucker@collabora.com> Reported-by:
"kernelci.org bot" <bot@kernelci.org> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Shuming Fan authored
This patch adds the return value when the volume settings were changed. The userspace application might monitor the kcontrols to check which control changed. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20210422103235.22048-1-shumingf@realtek.comSigned-off-by:
-
Shuming Fan authored
The DAPM event and mixer control could mute/unmute the capture directly. That will be confused that capture still works if the user settings is unmute before the capture. Therefore, this patch uses the variables to record the capture switch status of DAPM and mixer. Signed-off-by:
-
Jerome Brunet authored
Instead of using the clk embedded in the clk_hw (which is meant to go away), a clock provider which need to interact with its own clock should request clk reference through the clock provider API. Reviewed-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210421120512.413057-6-jbrunet@baylibre.comSigned-off-by:
-
Jerome Brunet authored
Clock providers should be registered using the clk_hw API. Signed-off-by:
-
Jerome Brunet authored
Clock drivers ops should not call the clk API but the clock provider (clk_hw) instead. Signed-off-by:
-
Jerome Brunet authored
Clock providers should use the clk_hw API Reviewed-by:
-
Jerome Brunet authored
Instead of using the clk embedded in the clk_hw (which is meant to go away), a clock provider which need to interact with its own clock should request clk reference through the clock provider API. Reviewed-by:
-
- 22 Apr, 2021 1 commit
-
-
Takashi Iwai authored
Through the examinations and experiments with lots of Roland and BOSS USB-audio devices, we found out that the recently introduced full-duplex operations with the implicit feedback mode work fine for quite a few devices, while the others need only the capture-side quirk to enforce the full-duplex mode. The recent commit d86f43b1 ("ALSA: usb-audio: Add support for many Roland devices' implicit feedback quirks") tried to add such quirk entries manually in the lists, but this turned out to be too many and error-prone, hence it was reverted again. This patch is another attempt to cover those missing Roland/BOSS devices but in a more generic way. It matches the devices with the vendor ID 0x0582, and checks whether they are with both ASYNC sync types or ASYNC is only for capture device. In the former case, it's the device with the implicit feedback mode, and applies accordingly. In both cases, the capture stream requires always the full-duplex mode, and we apply the known capture quirk for that, too. Basically the already existing BOSS device quirk entries become redundant after this generic matching, so those are removed. Although the capture_implicit_fb_quirks[] table became empty and superfluous, I keep it for now, so that people can put a special device easily at any time later again. Link: https://lore.kernel.org/r/CAOsVg8rA61B=005_VyUwpw3piVwA7Bo5fs1GYEB054efyzGjLw@mail.gmail.com Link: https://lore.kernel.org/r/20210414083255.9527-1-tiwai@suse.de BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212519Tested-by:
-
