- 19 Nov, 2014 8 commits
-
-
Steven Rostedt (Red Hat) authored
Checking the return code of every trace_seq_printf() operation and having to return early if it overflowed makes the code messy. Using the new trace_seq_has_overflowed() and trace_handle_return() functions allows us to clean up the code. In the future, trace_seq_printf() and friends will be turning into void functions and not returning a value. The trace_seq_has_overflowed() is to be used instead. This cleanup allows that change to take place. Cc: Jens Axboe <axboe@fb.com> Reviewed-by:
Petr Mladek <pmladek@suse.cz> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt (Red Hat) authored
Adding a trace_seq_has_overflowed() which returns true if the trace_seq had too much written into it allows us to simplify the code. Instead of checking the return value of every call to trace_seq_printf() and friends, they can all be called normally, and at the end we can return !trace_seq_has_overflowed() instead. Several functions also return TRACE_TYPE_PARTIAL_LINE when the trace_seq overflowed and TRACE_TYPE_HANDLED otherwise. Another helper function was created called trace_handle_return() which takes a trace_seq and returns these enums. Using this helper function also simplifies the code. This change also makes it possible to remove the return values of trace_seq_printf() and friends. They should instead just be void functions. Link: http://lkml.kernel.org/r/20141114011410.365183157@goodmis.orgReviewed-by:
-
Steven Rostedt (Red Hat) authored
In trace_seq_bitmask() it calls bitmap_scnprintf() not from the current position of the trace_seq buffer (s->buffer + s->len), but instead from the beginning of the buffer (s->buffer). Luckily, the only user of this "ipi_raise tracepoint" uses it as the first parameter, and as such, the start of the temp buffer in include/trace/ftrace.h (see __get_bitmask()). Reported-by:
-
Steven Rostedt (Red Hat) authored
Use the helper function trace_seq_buffer_ptr() to get the current location of the next buffer write of a trace_seq object, instead of open coding it. This facilitates the conversion of trace_seq to use seq_buf. Tested-by:
Jiri Kosina <jkosina@suse.cz> Acked-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
-
Steven Rostedt (Red Hat) authored
To allow for the restructiong of the trace_seq code, we need users of it to use the helper functions instead of accessing the internals of the trace_seq structure itself. Link: http://lkml.kernel.org/r/20141104160221.585025609@goodmis.orgTested-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Mark Rustad <mark.d.rustad@intel.com> Reviewed-by:
-
Steven Rostedt (Red Hat) authored
Stack traces that happen from function tracing check if the address on the stack is a __kernel_text_address(). That is, is the address kernel code. This calls core_kernel_text() which returns true if the address is part of the builtin kernel code. It also calls is_module_text_address() which returns true if the address belongs to module code. But what is missing is ftrace dynamically allocated trampolines. These trampolines are allocated for individual ftrace_ops that call the ftrace_ops callback functions directly. But if they do a stack trace, the code checking the stack wont detect them as they are neither core kernel code nor module address space. Adding another field to ftrace_ops that also stores the size of the trampoline assigned to it we can create a new function called is_ftrace_trampoline() that returns true if the address is a dynamically allocate ftrace trampoline. Note, it ignores trampolines that are not dynamically allocated as they will return true with the core_kernel_text() function. Link: http://lkml.kernel.org/r/20141119034829.497125839@goodmis.org Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
When CONFIG_FRAME_POINTERS are enabled, it is required that the ftrace_caller and ftrace_regs_caller trampolines set up frame pointers otherwise a stack trace from a function call wont print the functions that called the trampoline. This is due to a check in __save_stack_address(): #ifdef CONFIG_FRAME_POINTER if (!reliable) return; #endif The "reliable" variable is only set if the function address is equal to contents of the address before the address the frame pointer register points to. If the frame pointer is not set up for the ftrace caller then this will fail the reliable test. It will miss the function that called the trampoline. Worse yet, if fentry is used (gcc 4.6 and beyond), it will also miss the parent, as the fentry is called before the stack frame is set up. That means the bp frame pointer points to the stack of just before the parent function was called. Link: http://lkml.kernel.org/r/20141119034829.355440340@goodmis.org Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: stable@vger.kernel.org # 3.7+ Acked-by:
-
Steven Rostedt (Red Hat) authored
The function probe counting for traceon and traceoff suffered a race condition where if the probe was executing on two or more CPUs at the same time, it could decrement the counter by more than one when disabling (or enabling) the tracer only once. The way the traceon and traceoff probes are suppose to work is that they disable (or enable) tracing once per count. If a user were to echo 'schedule:traceoff:3' into set_ftrace_filter, then when the schedule function was called, it would disable tracing. But the count should only be decremented once (to 2). Then if the user enabled tracing again (via tracing_on file), the next call to schedule would disable tracing again and the count would be decremented to 1. But if multiple CPUS called schedule at the same time, it is possible that the count would be decremented more than once because of the simple "count--" used. By reading the count into a local variable and using memory barriers we can guarantee that the count would only be decremented once per disable (or enable). The stack trace probe had a similar race, but here the stack trace will decrement for each time it is called. But this had the read-modify- write race, where it could stack trace more than the number of times that was specified. This case we use a cmpxchg to stack trace only the number of times specified. The dump probes can still use the old "update_count()" function as they only run once, and that is controlled by the dump logic itself. Link: http://lkml.kernel.org/r/20141118134643.4b550ee4@gandalf.local.homeSigned-off-by:
-
- 14 Nov, 2014 9 commits
-
-
Byungchul Park authored
Usually, "msecs" notation means milli-seconds, and "usecs" notation means micro-seconds. Since the unit used in the code is micro-seconds, the notation should be replaced from msecs to usecs. Link: http://lkml.kernel.org/r/1415171926-9782-2-git-send-email-byungchul.park@lge.comSigned-off-by:
Byungchul Park <byungchul.park@lge.com> Signed-off-by:
-
Daniel Bristot de Oliveira authored
On the function_graph tracer, the print_graph_irq() function prints a trace line with the flag ==========> on an irq handler entry, and the flag <========== on an irq handler return. But when the latency-format is enable, it is not printing the latency-format flags, causing the following error in the trace output: 0) ==========> | 0) d... | smp_apic_timer_interrupt() { This patch fixes this issue by printing the latency-format flags when it is enable. Link: http://lkml.kernel.org/r/7c2e226dac20c940b6242178fab7f0e3c9b5ce58.1415233316.git.bristot@redhat.comReviewed-by:Luis Claudio R. Goncalves <lgoncalv@redhat.com> Signed-off-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by:
-
Rasmus Villemoes authored
Printing a single character to a seqfile might as well be done with seq_putc instead of seq_puts; this avoids a strlen() call and a memory access. It also shaves another few bytes off the generated code. Link: http://lkml.kernel.org/r/1415479332-25944-4-git-send-email-linux@rasmusvillemoes.dkSigned-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Rasmus Villemoes authored
Consecutive seq_puts calls with literal strings can be merged to a single call. This reduces the size of the generated code, and can also lead to slight .rodata reduction (because of fewer nul and padding bytes). It should also shave a off a few clock cycles. Link: http://lkml.kernel.org/r/1415479332-25944-3-git-send-email-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
Using seq_printf to print a simple string or a single character is a lot more expensive than it needs to be, since seq_puts and seq_putc exist. These patches do seq_printf(m, s) -> seq_puts(m, s) seq_printf(m, "%s", s) -> seq_puts(m, s) seq_printf(m, "%c", c) -> seq_putc(m, c) Subsequent patches will simplify further. Link: http://lkml.kernel.org/r/1415479332-25944-2-git-send-email-linux@rasmusvillemoes.dkSigned-off-by:
-
Daniel Thompson authored
Currently kdb's ftdump command will livelock by constantly printk'ing the empty string at KERN_EMERG level if it run when the ftrace system is not in use. This occurs because trace_empty() never returns false when the ring buffers are left at the start of a non-consuming read [launched by ring_buffer_read_start()]. This patch changes the loop exit condition to use the result of trace_find_next_entry_inc(). Effectively this switches the non-consuming kdb dumper to follow the approach of the non-consuming userspace interface [s_next()] rather than the consuming ftrace_dump(). Link: http://lkml.kernel.org/r/1415277716-19419-3-git-send-email-daniel.thompson@linaro.org Cc: Ingo Molnar <mingo@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Daniel Thompson authored
Currently kdb's ftdump command unconditionally crashes due to a null pointer de-reference whenever the command is run. This in turn causes the kernel to panic. The abridged stacktrace (gathered with ARCH=arm) is: --- cut here --- [<c09535ac>] (panic) from [<c02132dc>] (die+0x264/0x440) [<c02132dc>] (die) from [<c0952eb8>] (__do_kernel_fault.part.11+0x74/0x84) [<c0952eb8>] (__do_kernel_fault.part.11) from [<c021f954>] (do_page_fault+0x1d0/0x3c4) [<c021f954>] (do_page_fault) from [<c020846c>] (do_DataAbort+0x48/0xac) [<c020846c>] (do_DataAbort) from [<c0213c58>] (__dabt_svc+0x38/0x60) Exception stack(0xc0deba88 to 0xc0debad0) ba80: e8c29180 00000001 e9854304 e9854300 c0f567d8 c0df2580 baa0: 00000000 00000000 00000000 c0f117b8 c0e3a3c0 c0debb0c 00000000 c0debad0 bac0: 0000672e c02f4d60 60000193 ffffffff [<c0213c58>] (__dabt_svc) from [<c02f4d60>] (kdb_ftdump+0x1e4/0x3d8) [<c02f4d60>] (kdb_ftdump) from [<c02ce328>] (kdb_parse+0x2b8/0x698) [<c02ce328>] (kdb_parse) from [<c02ceef0>] (kdb_main_loop+0x52c/0x784) [<c02ceef0>] (kdb_main_loop) from [<c02d1b0c>] (kdb_stub+0x238/0x490) --- cut here --- The NULL deref occurs due to the initialized use of struct trace_iter's buffer_iter member. This is a regression, albeit a fairly elderly one. It was introduced by commit 6d158a81 ("tracing: Remove NR_CPUS array from trace_iterator"). This patch solves this by providing a collection of ring_buffer_iter(s) and using this to initialize buffer_iter. Note that static allocation is used solely because the trace_iter itself is also static allocated. Static allocation also means that we have to NULL-ify the pointer during cleanup to avoid use-after-free problems. Link: http://lkml.kernel.org/r/1415277716-19419-2-git-send-email-daniel.thompson@linaro.org Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
Luis Claudio R. Goncalves authored
According to the documentation, adding "traceoff_on_warning" to the boot command line should be enough to enable the feature. But right now it is necessary to specify "traceoff_on_warning=". Along with fixing that, also verify if the value passed, if any, is either "0" or "off". Link: http://lkml.kernel.org/r/20141112231400.GL12281@uudg.orgSigned-off-by:
-
Steven Rostedt (Red Hat) authored
With the new logic, if only a single user of ftrace function hooks is used, it will get its own trampoline assigned to it. The problem is that the control_ops is an indirect ops that perf ops uses. What that means is that when perf registers its ops with register_ftrace_function(), it has the CONTROL flag set and gets added to the control list instead of the global ftrace list. The control_ops gets added to that instead and the mcount trampoline calls the control_ops function. The control_ops function will iterate the control list and call the ops functions that are attached to it. But currently the trampoline is added to the perf ops and not the control ops, and when ftrace tries to find a trampoline hook for it, it fails to find one and gives the following splat: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 10133 at kernel/trace/ftrace.c:2033 ftrace_get_addr_new+0x6f/0xc0() Modules linked in: [...] CPU: 0 PID: 10133 Comm: perf Tainted: P 3.18.0-rc1-test+ #388 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 00000000000007f1 ffff8800c2643bc8 ffffffff814fca6e ffff88011ea0ed01 0000000000000000 ffff8800c2643c08 ffffffff81041ffd 0000000000000000 ffffffff810c388c ffffffff81a5a350 ffff880119b00000 ffffffff810001c8 Call Trace: [<ffffffff814fca6e>] dump_stack+0x46/0x58 [<ffffffff81041ffd>] warn_slowpath_common+0x81/0x9b [<ffffffff810c388c>] ? ftrace_get_addr_new+0x6f/0xc0 [<ffffffff810001c8>] ? 0xffffffff810001c8 [<ffffffff81042031>] warn_slowpath_null+0x1a/0x1c [<ffffffff810c388c>] ftrace_get_addr_new+0x6f/0xc0 [<ffffffff8102e938>] ftrace_replace_code+0xd6/0x334 [<ffffffff810c4116>] ftrace_modify_all_code+0x41/0xc5 [<ffffffff8102eba6>] arch_ftrace_update_code+0x10/0x19 [<ffffffff810c293c>] ftrace_run_update_code+0x21/0x42 [<ffffffff810c298f>] ftrace_startup_enable+0x32/0x34 [<ffffffff810c3049>] ftrace_startup+0x14e/0x15a [<ffffffff810c307c>] register_ftrace_function+0x27/0x40 [<ffffffff810dc118>] perf_ftrace_event_register+0x3e/0xee [<ffffffff810dbfbe>] perf_trace_init+0x29d/0x2a9 [<ffffffff810eb422>] perf_tp_event_init+0x27/0x3a [<ffffffff810f18bc>] perf_init_event+0x9e/0xed [<ffffffff810f1ba4>] perf_event_alloc+0x299/0x330 [<ffffffff810f236b>] SYSC_perf_event_open+0x3ee/0x816 [<ffffffff8115a066>] ? mntput+0x2d/0x2f [<ffffffff81142b00>] ? __fput+0xa7/0x1b2 [<ffffffff81091300>] ? do_gettimeofday+0x22/0x3a [<ffffffff810f279c>] SyS_perf_event_open+0x9/0xb [<ffffffff81502a92>] system_call_fastpath+0x12/0x17 ---[ end trace 81a53565150e4982 ]--- Bad trampoline accounting at: ffffffff810001c8 (run_init_process+0x0/0x2d) (10000001) Update the control_ops trampoline instead of the perf ops one. Reported-by: lkp@01.org Signed-off-by:
-
- 11 Nov, 2014 6 commits
-
-
Jiang Liu authored
Function trace_ctxwake_bin() misses ctx_switch_entry->next_cpu field, so user will get stale value for "next_cpu". Link: http://lkml.kernel.org/p/1377176379-27908-1-git-send-email-liuj97@gmail.comSigned-off-by:
Jiang Liu <jiang.liu@huawei.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
The only code that references tracing_sched_switch_trace() and tracing_sched_wakeup_trace() is the wakeup latency tracer. Those two functions use to belong to the sched_switch tracer which has long been removed. These functions were left behind because the wakeup latency tracer used them. But since the wakeup latency tracer is the only one to use them, they should be static functions inside that code. Signed-off-by: -
Oleg Nesterov authored
After the previous patch it is clear that "tracer_enabled" can never be true, we can remove the "if (tracer_enabled)" code in probe_sched_switch() and probe_sched_wakeup(). Plus we can obviously remove tracer_enabled, ctx_trace, and sched_stopped as well. Link: http://lkml.kernel.org/p/20140723193503.GA30217@redhat.comSigned-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
tracing_{start,stop}_sched_switch_record() have no callers since 87d80de2 "tracing: Remove obsolete sched_switch tracer". The last caller of tracing_sched_switch_assign_trace() was removed by 30dbb20e "tracing: Remove boot tracer". Link: http://lkml.kernel.org/p/20140723193501.GA30214@redhat.comSigned-off-by: -
Steven Rostedt (Red Hat) authored
With the introduction of the dynamic trampolines, it is useful that if things go wrong that ftrace_bug() produces more information about what the current state is. This can help debug issues that may arise. Ftrace has lots of checks to make sure that the state of the system it touchs is exactly what it expects it to be. When it detects an abnormality it calls ftrace_bug() and disables itself to prevent any further damage. It is crucial that ftrace_bug() produces sufficient information that can be used to debug the situation. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by:
-
Steven Rostedt (Red Hat) authored
When the static ftrace_ops (like function tracer) enables tracing, and it is the only callback that is referencing a function, a trampoline is dynamically allocated to the function that calls the callback directly instead of calling a loop function that iterates over all the registered ftrace ops (if more than one ops is registered). But when it comes to dynamically allocated ftrace_ops, where they may be freed, on a CONFIG_PREEMPT kernel there's no way to know when it is safe to free the trampoline. If a task was preempted while executing on the trampoline, there's currently no way to know when it will be off that trampoline. But this is not true when it comes to !CONFIG_PREEMPT. The current method of calling schedule_on_each_cpu() will force tasks off the trampoline, becaues they can not schedule while on it (kernel preemption is not configured). That means it is safe to free a dynamically allocated ftrace ops trampoline when CONFIG_PREEMPT is not configured. Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
-
- 31 Oct, 2014 2 commits
-
-
Steven Rostedt (Red Hat) authored
The file /sys/kernel/debug/tracing/eneabled_functions is used to debug ftrace function hooks. Add to the output what function is being called by the trampoline if the arch supports it. Add support for this feature in x86_64. Cc: H. Peter Anvin <hpa@linux.intel.com> Tested-by:
-
Steven Rostedt (Red Hat) authored
The current method of handling multiple function callbacks is to register a list function callback that calls all the other callbacks based on their hash tables and compare it to the function that the callback was called on. But this is very inefficient. For example, if you are tracing all functions in the kernel and then add a kprobe to a function such that the kprobe uses ftrace, the mcount trampoline will switch from calling the function trace callback to calling the list callback that will iterate over all registered ftrace_ops (in this case, the function tracer and the kprobes callback). That means for every function being traced it checks the hash of the ftrace_ops for function tracing and kprobes, even though the kprobes is only set at a single function. The kprobes ftrace_ops is checked for every function being traced! Instead of calling the list function for functions that are only being traced by a single callback, we can call a dynamically allocated trampoline that calls the callback directly. The function graph tracer already uses a direct call trampoline when it is being traced by itself but it is not dynamically allocated. It's trampoline is static in the kernel core. The infrastructure that called the function graph trampoline can also be used to call a dynamically allocated one. For now, only ftrace_ops that are not dynamically allocated can have a trampoline. That is, users such as function tracer or stack tracer. kprobes and perf allocate their ftrace_ops, and until there's a safe way to free the trampoline, it can not be used. The dynamically allocated ftrace_ops may, although, use the trampoline if the kernel is not compiled with CONFIG_PREEMPT. But that will come later. Tested-by:
-
- 24 Oct, 2014 2 commits
-
-
Steven Rostedt (Red Hat) authored
When modifying code, ftrace has several checks to make sure things are being done correctly. One of them is to make sure any code it modifies is exactly what it expects it to be before it modifies it. In order to do so with the new trampoline logic, it must be able to find out what trampoline a function is hooked to in order to see if the code that hooks to it is what's expected. The logic to find the trampoline from a record (accounting descriptor for a function that is hooked) needs to only look at the "old_hash" of an ops that is being modified. The old_hash is the list of function an ops is hooked to before its update. Since a record would only be pointing to an ops that is being modified if it was already hooked before. Currently, it can pick a modified ops based on its new functions it will be hooked to, and this picks the wrong trampoline and causes the check to fail, disabling ftrace. Signed-off-by: -
Steven Rostedt (Red Hat) authored
The code that checks for trampolines when modifying function hooks tests against a modified ops "old_hash". But the ops old_hash pointer is not being updated before the changes are made, making it possible to not find the right hash to the callback and possibly causing ftrace to break in accounting and disable itself. Have the ops set its old_hash before the modifying takes place. Signed-off-by:
-
- 20 Oct, 2014 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A batch of fixes that have come in during the merge window. Some of them are defconfig updates for things that have now landed, some errata additions and a few general scattered fixes. There's also a qcom DT update that adds support for SATA on AP148, and basic support for Sony Xperia Z1 and CM-QS600 platforms that seemed isolated enough that we could merge it even if it's late" * tag 'arm-soc-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: corrected bcm2835 search ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa ARM: dts: Explicitly set dr_mode on exynos Peach boards ARM: dts: qcom: add CM-QS600 board ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone ARM: dts: qcom: Add SATA support on IPQ8064/AP148 MAINTAINERS: Update Santosh Shilimkar's email id ARM: sunxi_defconfig: enable CONFIG_REGULATOR ARM: dts: Disable smc91x on n900 until bootloader dependency is removed ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3 ARM: exynos_defconfig: enable USB gadget support ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n ARM: SAMSUNG: Restore Samsung PM Debug functionality ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12 ARM: exynos_defconfig: Enable SBS battery support ARM: exynos_defconfig: Enable Control Groups support ARM: exynos_defconfig: Enable Atmel maXTouch support ARM: exynos_defconfig: Enable MAX77802
-
- 19 Oct, 2014 11 commits
-
-
git://git.infradead.org/users/eparis/auditLinus Torvalds authored
Pull audit updates from Eric Paris: "So this change across a whole bunch of arches really solves one basic problem. We want to audit when seccomp is killing a process. seccomp hooks in before the audit syscall entry code. audit_syscall_entry took as an argument the arch of the given syscall. Since the arch is part of what makes a syscall number meaningful it's an important part of the record, but it isn't available when seccomp shoots the syscall... For most arch's we have a better way to get the arch (syscall_get_arch) So the solution was two fold: Implement syscall_get_arch() everywhere there is audit which didn't have it. Use syscall_get_arch() in the seccomp audit code. Having syscall_get_arch() everywhere meant it was a useless flag on the stack and we could get rid of it for the typical syscall entry. The other changes inside the audit system aren't grand, fixed some records that had invalid spaces. Better locking around the task comm field. Removing some dead functions and structs. Make some things static. Really minor stuff" * git://git.infradead.org/users/eparis/audit: (31 commits) audit: rename audit_log_remove_rule to disambiguate for trees audit: cull redundancy in audit_rule_change audit: WARN if audit_rule_change called illegally audit: put rule existence check in canonical order next: openrisc: Fix build audit: get comm using lock to avoid race in string printing audit: remove open_arg() function that is never used audit: correct AUDIT_GET_FEATURE return message type audit: set nlmsg_len for multicast messages. audit: use union for audit_field values since they are mutually exclusive audit: invalid op= values for rules audit: use atomic_t to simplify audit_serial() kernel/audit.c: use ARRAY_SIZE instead of sizeof/sizeof[0] audit: reduce scope of audit_log_fcaps audit: reduce scope of audit_net_id audit: arm64: Remove the audit arch argument to audit_syscall_entry arm64: audit: Add audit hook in syscall_trace_enter/exit() audit: x86: drop arch from __audit_syscall_entry() interface sparc: implement is_32bit_task sparc: properly conditionalize use of TIF_32BIT ...
-
Olof Johansson authored
Merge tag 'qcom-dt-for-3.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into fixes Merge "qcom DT changes for v3.18-3" from Kumar Gala: Qualcomm ARM Based Device Tree Updates for v3.18-3 * Added Board support for CM-QS600 and Sony Xperia Z1 phone * Added SATA support on IPQ8064/AP148 * tag 'qcom-dt-for-3.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: ARM: dts: qcom: add CM-QS600 board ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone ARM: dts: qcom: Add SATA support on IPQ8064/AP148
-
Olof Johansson authored
Merge tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull more fixes from Kukjin Kim: 2nd Samsung fixes for v3.18 - Explicitly set dr_mode on exynos5800-peach-pi, exynos5420-peach-pit and exynos5420-arndale-octa boards, because the USB dwc3 controller will not work properly without dr_mode as host on above boards if the USB host and gadget are enabled in kernel configuration both. * tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa ARM: dts: Explicitly set dr_mode on exynos Peach boards Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Scott Branden authored
Corrected bcm2835 maintainer info by using N: to specify any files with bcm2835 in are directed to the proper maintainer. Also corrected minor mispelling of ARCHITECTURE in 2 comment locations. Signed-off-by:
Scott Branden <sbranden@broadcom.com> Signed-off-by:
Stephen Warren <swarren@wwwdotorg.org> Signed-off-by:
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull ntb (non-transparent bridge) updates from Jon Mason: "Add support for Haswell NTB split BARs, a debugfs entry for basic debugging info, and some code clean-ups" * tag 'ntb-3.18' of git://github.com/jonmason/ntb: ntb: Adding split BAR support for Haswell platforms ntb: use errata flag set via DID to implement workaround ntb: conslidate reading of PPD to move platform detection earlier ntb: move platform detection to separate function NTB: debugfs device entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "Highlights from the I2C subsystem for 3.18: - new drivers for Axxia AM55xx, and Hisilicon hix5hd2 SoC. - designware driver gained AMD support, exynos gained exynos7 support The rest is usual driver stuff. Hopefully no lowlights this time" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: Add Device IDs for Intel Sunrise Point PCH i2c: hix5hd2: add i2c controller driver i2c-imx: Disable the clock on probe failure i2c: designware: Add support for AMD I2C controller i2c: designware: Rework probe() to get clock a bit later i2c: designware: Default to fast mode in case of ACPI i2c: axxia: Add I2C driver for AXM55xx i2c: exynos: add support for HSI2C module on Exynos7 i2c: mxs: detect No Slave Ack on SELECT in PIO mode i2c: cros_ec: Remove EC_I2C_FLAG_10BIT i2c: cros-ec-tunnel: Add of match table i2c: rcar: remove sign-compare flaw i2c: ismt: Use minimum descriptor size i2c: imx: Add arbitration lost check i2c: rk3x: Remove unlikely() annotations i2c: rcar: check for no IRQ in rcar_i2c_irq() i2c: rcar: make rcar_i2c_prepare_msg() *void* i2c: rcar: simplify check for last message i2c: designware: add support of platform data to set I2C mode i2c: designware: add support of I2C standard mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Here are a collection of small fixes after 3.18 merge. The urgent one is the fix for kernel panics with linked PCM substream triggered by the recent nonatomic PCM ops support. Other two fixes (emu10k1 and bebob) are stable fixes, and one easy PCI ID addition for a new Intel HD-audio controller" * tag 'sound-fix-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda_intel: Add Device IDs for Intel Sunrise Point PCH ALSA: emu10k1: Fix deadlock in synth voice lookup ALSA: pcm: Fix referred substream in snd_pcm_action_group() unlock loop ALSA: bebob: Fix failure to detect source of clock for Terratec Phase 88
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull second round of input updates from Dmitry Torokhov: "Mostly simple bug fixes, although we do have one brand new driver for Microchip AR1021 i2c touchscreen. Also there is the change to stop trying to use i8042 active multiplexing by default (it is still possible to activate it via i8042.nomux=0 on boxes that implement it)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add Thrustmaster as Xbox 360 controller vendor Input: xpad - add USB ID for Thrustmaster Ferrari 458 Racing Wheel Input: max77693-haptic - fix state check in imax77693_haptic_disable() Input: xen-kbdfront - free grant table entry in xenkbd_disconnect_backend Input: alps - fix v4 button press recognition Input: i8042 - disable active multiplexing by default Input: i8042 - add noloop quirk for Asus X750LN Input: synaptics - gate forcepad support by DMI check Input: Add Microchip AR1021 i2c touchscreen Input: cros_ec_keyb - add of match table Input: serio - avoid negative serio device numbers Input: avoid negative input device numbers Input: automatically set EV_ABS bit in input_set_abs_params Input: adp5588-keys - cancel workqueue in failure path Input: opencores-kbd - switch to using managed resources Input: evdev - fix EVIOCG{type} ioctl
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull infiniband/RDMA updates from Roland Dreier: - large set of iSER initiator improvements - hardware driver fixes for cxgb4, mlx5 and ocrdma - small fixes to core midlayer * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (47 commits) RDMA/cxgb4: Fix ntuple calculation for ipv6 and remove duplicate line RDMA/cxgb4: Add missing neigh_release in find_route RDMA/cxgb4: Take IPv6 into account for best_mtu and set_emss RDMA/cxgb4: Make c4iw_wr_log_size_order static IB/core: Fix XRC race condition in ib_uverbs_open_qp IB/core: Clear AH attr variable to prevent garbage data RDMA/ocrdma: Save the bit environment, spare unncessary parenthesis RDMA/ocrdma: The kernel has a perfectly good BIT() macro - use it RDMA/ocrdma: Don't memset() buffers we just allocated with kzalloc() RDMA/ocrdma: Remove a unused-label warning RDMA/ocrdma: Convert kernel VA to PA for mmap in user RDMA/ocrdma: Get vlan tag from ib_qp_attrs RDMA/ocrdma: Add default GID at index 0 IB/mlx5, iser, isert: Add Signature API additions Target/iser: Centralize ib_sig_domain setting IB/iser: Centralize ib_sig_domain settings IB/mlx5: Use extended internal signature layout IB/iser: Set IP_CSUM as default guard type IB/iser: Remove redundant assignment IB/mlx5: Use enumerations for PI copy mask ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull more perf updates from Ingo Molnar: "A second (and last) round of late coming fixes and changes, almost all of them in perf tooling: User visible tooling changes: - Add period data column and make it default in 'perf script' (Jiri Olsa) - Add a visual cue for toggle zeroing of samples in 'perf top' (Taeung Song) - Improve callchains when using libunwind (Namhyung Kim) Tooling fixes and infrastructure changes: - Fix for double free in 'perf stat' when using some specific invalid command line combo (Yasser Shalabi) - Fix off-by-one bugs in map->end handling (Stephane Eranian) - Fix off-by-one bug in maps__find(), also related to map->end handling (Namhyung Kim) - Make struct symbol->end be the first addr after the symbol range, to make it match the convention used for struct map->end. (Arnaldo Carvalho de Melo) - Fix perf_evlist__add_pollfd() error handling in 'perf kvm stat live' (Jiri Olsa) - Fix python test build by moving callchain_param to an object linked into the python binding (Jiri Olsa) - Document sysfs events/ interfaces (Cody P Schafer) - Fix typos in perf/Documentation (Masanari Iida) - Add missing 'struct option' forward declaration (Arnaldo Carvalho de Melo) - Add option to copy events when queuing for sorting across cpu buffers and enable it for 'perf kvm stat live', to avoid having events left in the queue pointing to the ring buffer be rewritten in high volume sessions. (Alexander Yarygin, improving work done by David Ahern): - Do not include a struct hists per perf_evsel, untangling the histogram code from perf_evsel, to pave the way for exporting a minimalistic tools/lib/api/perf/ library usable by tools/perf and initially by the rasd daemon being developed by Borislav Petkov, Robert Richter and Jean Pihet. (Arnaldo Carvalho de Melo) - Make perf_evlist__open(evlist, NULL, NULL), i.e. without cpu and thread maps mean syswide monitoring, reducing the boilerplate for tools that only want system wide mode. (Arnaldo Carvalho de Melo) - Move exit stuff from perf_evsel__delete to perf_evsel__exit, delete should be just a front end for exit + free (Arnaldo Carvalho de Melo) - Add support to new style format of kernel PMU event. (Kan Liang) and other misc fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits) perf script: Add period as a default output column perf script: Add period data column perf evsel: No need to drag util/cgroup.h perf evlist: Add missing 'struct option' forward declaration perf evsel: Move exit stuff from __delete to __exit kprobes/x86: Remove stale ARCH_SUPPORTS_KPROBES_ON_FTRACE define perf kvm stat live: Enable events copying perf session: Add option to copy events when queueing perf Documentation: Fix typos in perf/Documentation perf trace: Use thread_{,_set}_priv helpers perf kvm: Use thread_{,_set}_priv helpers perf callchain: Create an address space per thread perf report: Set callchain_param.record_mode for future use perf evlist: Fix for double free in tools/perf stat perf test: Add test case for pmu event new style format perf tools: Add support to new style format of kernel PMU event perf tools: Parse the pmu event prefix and suffix Revert "perf tools: Default to cpu// for events v5" perf Documentation: Remove Ruplicated docs for powerpc cpu specific events perf Documentation: sysfs events/ interfaces ... -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "Here we have two bug fixes: 1) The current thread's fault_code is not setup properly upon entry to do_sparc64_fault() in some paths, leading to spurious SIGBUS. 2) Don't use a zero length array at the end of thread_info on sparc64, otherwise end_of_stack() isn't right" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Do not define thread fpregs save area as zero-length array. sparc64: Fix corrupted thread fault code.
-
