- 05 Mar, 2019 40 commits
-
-
Sergei Shtylyov authored
commit 5c27ff5d upstream. I have encountered an interrupt storm during the eMMC chip probing (and the chip finally didn't get detected). It turned out that U-Boot left the DMAC interrupts enabled while the Linux driver didn't use those. The SDHI driver's interrupt handler somehow assumes that, even if an SDIO interrupt didn't happen, it should return IRQ_HANDLED. I think that if none of the enabled interrupts happened and got handled, we should return IRQ_NONE -- that way the kernel IRQ code recoginizes a spurious interrupt and masks it off pretty quickly... Fixes: 7729c7a2 ("mmc: tmio: Provide separate interrupt handlers") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by:
Simon Horman <horms+renesas@verge.net.au> Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonathan Neuschäfer authored
commit c9bd505d upstream. When using the mmc_spi driver with a card-detect pin, I noticed that the card was not detected immediately after probe, but only after it was unplugged and plugged back in (and the CD IRQ fired). The call tree looks something like this: mmc_spi_probe mmc_add_host mmc_start_host _mmc_detect_change mmc_schedule_delayed_work(&host->detect, 0) mmc_rescan host->bus_ops->detect(host) mmc_detect _mmc_detect_card_removed host->ops->get_cd(host) mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set) mmc_gpiod_request_cd ctx->cd_gpio = desc To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ is registered. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Seth Forshee authored
commit 186b8f15 upstream. Several callers to epapr_hypercall() pass an uninitialized stack allocated array for the input arguments, presumably because they have no input arguments. However this can produce errors like this one arch/powerpc/include/asm/epapr_hcalls.h:470:42: error: 'in' may be used uninitialized in this function [-Werror=maybe-uninitialized] unsigned long register r3 asm("r3") = in[0]; ~~^~~ Fix callers to this function to always zero-initialize the input arguments array to prevent this. Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: "A. Wilcox" <awilfox@adelielinux.org> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit 619ad846 ] kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being delivered to the host (L1) when it's running nested. The problem seems to be: svm_complete_interrupts() raises 'nmi_injected' flag but later we decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI injection upon entry so it got delivered to L1 instead of L2. It seems that VMX code solves the same issue in prepare_vmcs12(), this was introduced with code refactoring in commit 5f3d5799 ("KVM: nVMX: Rework event injection and recovery"). Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Suravee Suthikulpanit authored
[ Upstream commit bb218fbc ] In case of incomplete IPI with invalid interrupt type, the current SVM driver does not properly emulate the IPI, and fails to boot FreeBSD guests with multiple vcpus when enabling AVIC. Fix this by update APIC ICR high/low registers, which also emulate sending the IPI. Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
-
Chaitanya Tata authored
[ Upstream commit 93183bdb ] Recently, DMG frequency bands have been extended till 71GHz, so extend the range check till 20GHz (45-71GHZ), else some channels will be marked as disabled. Signed-off-by:
Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Mathieu Malaterre authored
[ Upstream commit 7c53eb5d ] During refactor in commit 9e478066 ("mac80211: fix MU-MIMO follow-MAC mode") a new struct 'action' was declared with packed attribute as: struct { struct ieee80211_hdr_3addr hdr; u8 category; u8 action_code; } __packed action; But since struct 'ieee80211_hdr_3addr' is declared with an aligned keyword as: struct ieee80211_hdr { __le16 frame_control; __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; __le16 seq_ctrl; u8 addr4[ETH_ALEN]; } __packed __aligned(2); Solve the ambiguity of placing aligned structure in a packed one by adding the aligned(2) attribute to struct 'action'. This removes the following warning (W=1): net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned] Cc: Johannes Berg <johannes.berg@intel.com> Suggested-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
Balaji Pothunoori authored
[ Upstream commit 7ed52853 ] Following call trace is observed while adding TDLS peer entry in driver during TDLS setup. Call Trace: [<c1301476>] dump_stack+0x47/0x61 [<c10537d2>] __warn+0xe2/0x100 [<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211] [<c1053895>] warn_slowpath_null+0x25/0x30 [<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211] [<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211] [<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211] [<c1876fe3>] nl80211_new_station+0x273/0x420 [<c170f6d9>] genl_rcv_msg+0x219/0x3c0 [<c170f4c0>] ? genl_rcv+0x30/0x30 [<c170ee7e>] netlink_rcv_skb+0x8e/0xb0 [<c170f4ac>] genl_rcv+0x1c/0x30 [<c170e8aa>] netlink_unicast+0x13a/0x1d0 [<c170ec18>] netlink_sendmsg+0x2d8/0x390 [<c16c5acd>] sock_sendmsg+0x2d/0x40 [<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0 Fixing this by allowing TDLS setup request only when we have completed association. Signed-off-by:
Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit e95d22c6 ] The IBM virtual ethernet driver's polling function continues to process frames after rescheduling NAPI, resulting in a warning if it exhausted its budget. Do not restart polling after calling napi_reschedule. Instead let frames be processed in the following instance. Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Maciej Żenczykowski authored
[ Upstream commit 3b707c30 ] __bpf_redirect() and act_mirred checks this boolean to determine whether to prefix an ethernet header. Signed-off-by:
Maciej Żenczykowski <maze@google.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Zhang Run authored
[ Upstream commit 6eea3527 ] The ax88772_bind() should return error code immediately when the PHY was not reset properly through ax88772a_hw_reset(). Otherwise, The asix_get_phyid() will block when get the PHY Identifier from the PHYSID1 MII registers through asix_mdio_read() due to the PHY isn't ready. Furthermore, it will produce a lot of error message cause system crash.As follows: asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffffb9 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 ... Signed-off-by:
Zhang Run <zhang.run@zte.com.cn> Reviewed-by:
Yang Wei <yang.wei9@zte.com.cn> Tested-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by:
-
Haiyang Zhang authored
[ Upstream commit b4a10c75 ] Hyper-V hosts require us to disable RSS before changing RSS key, otherwise the changing request will fail. This patch fixes the coding error. Fixes: ff4a4419 ("netvsc: allow get/set of RSS indirection table") Reported-by:
Wei Hu <weh@microsoft.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> [sl: fix up subject line] Signed-off-by:
-
Atsushi Nemoto authored
[ Upstream commit 17b42a20 ] The connect_local_phy should return NULL (not negative errno) on error, since its caller expects it. Signed-off-by:
Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Acked-by:
Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by:
-
Varun Prakash authored
[ Upstream commit fe35a40e ] Assign fc_vport to ln->fc_vport before calling csio_fcoe_alloc_vnp() to avoid a NULL pointer dereference in csio_vport_set_state(). ln->fc_vport is dereferenced in csio_vport_set_state(). Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Tejun Heo authored
[ Upstream commit 7fc5854f ] sync_inodes_sb() can race against cgwb (cgroup writeback) membership switches and fail to writeback some inodes. For example, if an inode switches to another wb while sync_inodes_sb() is in progress, the new wb might not be visible to bdi_split_work_to_wbs() at all or the inode might jump from a wb which hasn't issued writebacks yet to one which already has. This patch adds backing_dev_info->wb_switch_rwsem to synchronize cgwb switch path against sync_inodes_sb() so that sync_inodes_sb() is guaranteed to see all the target wbs and inodes can't jump wbs to escape syncing. v2: Fixed misplaced rwsem init. Spotted by Jiufei. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Jiufei Xue <xuejiufei@gmail.com> Link: http://lkml.kernel.org/r/dc694ae2-f07f-61e1-7097-7c8411cee12d@gmail.comAcked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Ernesto A. Fernández authored
[ Upstream commit 8b9433eb ] On a DIO_SKIP_HOLES filesystem, the ->get_block() method is currently not allowed to create blocks for an empty inode. This confusion comes from trying to bit shift a negative number, so check the size of the inode first. The problem is most visible for hfsplus, because the fallback to buffered I/O doesn't happen and the write fails with EIO. This is in part the fault of the module, because it gives a wrong return value on ->get_block(); that will be fixed in a separate patch. Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Reviewed-by:
Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by:
-
Liam Mark authored
[ Upstream commit 31eb79db ] Often userspace doesn't know when the kernel will be calling dma_buf_detach on the buffer. If userpace starts its CPU access at the same time as the sg list is being freed it could end up accessing the sg list after it has been freed. Thread A Thread B - DMA_BUF_IOCTL_SYNC IOCT - ion_dma_buf_begin_cpu_access - list_for_each_entry - ion_dma_buf_detatch - free_duped_table - dma_sync_sg_for_cpu Fix this by getting the ion_buffer lock before freeing the sg table memory. Fixes: 2a55e7b5 ("staging: android: ion: Call dma_map_sg for syncing and mapping") Signed-off-by:
Liam Mark <lmark@codeaurora.org> Acked-by:
Laura Abbott <labbott@redhat.com> Acked-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
-
Tomonori Sakita authored
[ Upstream commit 815d835b ] Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4. Signed-off-by:
Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by:
-
Kenneth Feng authored
[ Upstream commit 6d87dc97 ] gfxclk for OD setting is limited to 1980M for non-acg ASICs of Vega10 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Xie Yongji authored
[ Upstream commit e158488b ] Because wake_q_add() can imply an immediate wakeup (cmpxchg failure case), we must not rely on the wakeup being delayed. However, commit: e3851390 ("locking/rwsem: Rework zeroing reader waiter->task") relies on exactly that behaviour in that the wakeup must not happen until after we clear waiter->task. [ peterz: Added changelog. ] Signed-off-by:
Xie Yongji <xieyongji@baidu.com> Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: e3851390 ("locking/rwsem: Rework zeroing reader waiter->task") Link: https://lkml.kernel.org/r/1543495830-2644-1-git-send-email-xieyongji@baidu.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit b061c38b ] We must not rely on wake_q_add() to delay the wakeup; in particular commit: 1d0dcb3a ("futex: Implement lockless wakeups") moved wake_q_add() before smp_store_release(&q->lock_ptr, NULL), which could result in futex_wait() waking before observing ->lock_ptr == NULL and going back to sleep again. Signed-off-by:
-
Prateek Sood authored
[ Upstream commit 6dc080ee ] For some peculiar reason rcuwait_wake_up() has the right barrier in the comment, but not in the code. This mistake has been observed to cause a deadlock in the following situation: P1 P2 percpu_up_read() percpu_down_write() rcu_sync_is_idle() // false rcu_sync_enter() ... __percpu_up_read() [S] ,- __this_cpu_dec(*sem->read_count) | smp_rmb(); [L] | task = rcu_dereference(w->task) // NULL | | [S] w->task = current | smp_mb(); | [L] readers_active_check() // fail `-> <store happens here> Where the smp_rmb() (obviously) fails to constrain the store. [ peterz: Added changelog. ] Signed-off-by:
Prateek Sood <prsood@codeaurora.org> Signed-off-by:
Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 8f95c90c ("sched/wait, RCU: Introduce rcuwait machinery") Link: https://lkml.kernel.org/r/1543590656-7157-1-git-send-email-prsood@codeaurora.orgSigned-off-by:
-
Bob Copeland authored
[ Upstream commit a0dc0203 ] In ieee80211_rx_h_mesh_fwding, we increment the 'dropped_frames_ttl' counter when we decrement the ttl to zero. For unicast frames destined for other hosts, we stop processing the frame at that point. For multicast frames, we do not rebroadcast it in this case, but we do pass the frame up the stack to process it on this STA. That doesn't match the usual definition of "dropped," so don't count those as such. With this change, something like `ping6 -i0.2 ff02::1%mesh0` from a peer in a ttl=1 network no longer increments the counter rapidly. Signed-off-by:
Bob Copeland <bobcopeland@fb.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 97715058 ] When CONFIG_NO_AUTO_INLINE was present in linux-next (which added '-fno-inline-functions' to KBUILD_CFLAGS), an allyesconfig build with Clang failed at the modpost stage: ERROR: "is_broadcast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! ERROR: "is_zero_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! ERROR: "is_multicast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! These functions were marked as extern inline, meaning that if inlining doesn't happen, the function will be undefined, as it is above. This happens to work with GCC because the '-fno-inline-functions' option respects the __inline attribute so all instances of these functions are inlined as expected and the definition doesn't actually matter. However, with Clang and '-fno-inline-functions', a function has to be marked with the __always_inline attribute to be considered for inlining, which none of these functions are. Clang tries to find the symbol definition elsewhere as it was told and fails, which trickles down to modpost. To make sure that this code compiles regardless of compiler and make the intention of the code clearer, use 'static' to ensure these functions are always defined, regardless of inlining. Additionally, silence a checkpatch warning by switching from '__inline' to 'inline'. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Aaron Hill authored
[ Upstream commit 129699bb ] Changes since V1: * Use dev_info instead of printk * Use dev_warn instead of BUG_ON Previously, sysfs_create_group was called before all initialization had fully run - specifically, before pci_set_drvdata was called. Since the sysctl group is visible to userspace as soon as sysfs_create_group returns, a small window of time existed during which a process could read from an uninitialized/partially-initialized device. This commit moves the creation of the sysctl group to after all initialized is completed. This ensures that it's impossible for userspace to read from a sysctl file before initialization has fully completed. To catch any future regressions, I've added a check to ensure that proc_thermal_emum_mode is never PROC_THERMAL_NONE when a process tries to read from a sysctl file. Previously, the aforementioned race condition could result in the 'else' branch running while PROC_THERMAL_NONE was set, leading to a null pointer deference. Signed-off-by:
Aaron Hill <aa1ronham@gmail.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Eugeniy Paltsev authored
[ Upstream commit 4e868f84 ] | CC mm/nobootmem.o |In file included from ./include/asm-generic/bug.h:18:0, | from ./arch/arc/include/asm/bug.h:32, | from ./include/linux/bug.h:5, | from ./include/linux/mmdebug.h:5, | from ./include/linux/gfp.h:5, | from ./include/linux/slab.h:15, | from mm/nobootmem.c:14: |mm/nobootmem.c: In function '__free_pages_memory': |./include/linux/kernel.h:845:29: warning: comparison of distinct pointer types lacks a cast | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) | ^ |./include/linux/kernel.h:859:4: note: in expansion of macro '__typecheck' | (__typecheck(x, y) && __no_side_effects(x, y)) | ^~~~~~~~~~~ |./include/linux/kernel.h:869:24: note: in expansion of macro '__safe_cmp' | __builtin_choose_expr(__safe_cmp(x, y), \ | ^~~~~~~~~~ |./include/linux/kernel.h:878:19: note: in expansion of macro '__careful_cmp' | #define min(x, y) __careful_cmp(x, y, <) | ^~~~~~~~~~~~~ |mm/nobootmem.c:104:11: note: in expansion of macro 'min' | order = min(MAX_ORDER - 1UL, __ffs(start)); Change __ffs return value from 'int' to 'unsigned long' as it is done in other implementations (like asm-generic, x86, etc...) to avoid build-time warnings in places where type is strictly checked. As __ffs may return values in [0-31] interval changing return type to unsigned is valid. Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 508cacd7 ] With gcc 7.3.0: gpio-mockup-chardev.c: In function ‘get_debugfs’: gpio-mockup-chardev.c:62:3: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result [-Wunused-result] asprintf(path, "%s/gpio", mnt_fs_get_target(fs)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Handle asprintf() failures to fix this. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Fathi Boudra authored
[ Upstream commit 5bbc73a8 ] seccomp_bpf fails to build due to undefined reference errors: aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -O2 -pipe -g -feliminate-unused-debug-types -Wl,-no-as-needed -Wall -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lpthread seccomp_bpf.c -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf /tmp/ccrlR3MW.o: In function `tsync_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post' /tmp/ccrlR3MW.o: In function `TSYNC_setup': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1863: undefined reference to `sem_init' /tmp/ccrlR3MW.o: In function `TSYNC_teardown': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1904: undefined reference to `sem_destroy' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1897: undefined reference to `pthread_kill' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1898: undefined reference to `pthread_cancel' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1899: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_siblings_fail_prctl': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1978: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1990: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1992: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_ancestor': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2016: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2032: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2034: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_sibling_want_nnp': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2046: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2058: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2060: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_no_filter': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2073: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2098: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2100: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_one_divergence': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2125: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2143: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2145: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_not_under_filter': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2169: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2202: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2227: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' It's GNU Make and linker specific. The default Makefile rule looks like: $(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS) When linking is done by gcc itself, no issue, but when it needs to be passed to proper ld, only LDLIBS follows and then ld cannot know what libs to link with. More detail: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html LDFLAGS Extra flags to give to compilers when they are supposed to invoke the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable instead. LDLIBS Library flags or names given to compilers when they are supposed to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS variable. https://lkml.org/lkml/2010/2/10/362 tools/perf: libraries must come after objects Link order matters, use LDLIBS instead of LDFLAGS to properly link against libpthread. Signed-off-by:
Fathi Boudra <fathi.boudra@linaro.org> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Silvio Cesare authored
[ Upstream commit c407cd00 ] Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by:
Silvio Cesare <silvio.cesare@gmail.com> Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Silvio Cesare authored
[ Upstream commit e581e151 ] Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by:
-
Srinivas Ramana authored
[ Upstream commit bddda606 ] If all CPUs in the irq_default_affinity mask are offline when an interrupt is initialized then irq_setup_affinity() can set an empty affinity mask for a newly allocated interrupt. Fix this by falling back to cpu_online_mask in case the resulting affinity mask is zero. Signed-off-by:
Srinivas Ramana <sramana@codeaurora.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-msm@vger.kernel.org Link: https://lkml.kernel.org/r/1545312957-8504-1-git-send-email-sramana@codeaurora.orgSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit df28169e ] The source_sink_alloc_func() function is supposed to return error pointers on error. The function is called from usb_get_function() which doesn't check for NULL returns so it would result in an Oops. Of course, in the current kernel, small allocations always succeed so this doesn't affect runtime. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Zeng Tao authored
[ Upstream commit 88b1bb1f ] Currently the link_state is uninitialized and the default value is 0(U0) before the first time we start the udc, and after we start the udc then stop the udc, the link_state will be undefined. We may have the following warnings if we start the udc again with an undefined link_state: WARNING: CPU: 0 PID: 327 at drivers/usb/dwc3/gadget.c:294 dwc3_send_gadget_ep_cmd+0x304/0x308 dwc3 100e0000.hidwc3_0: wakeup failed --> -22 [...] Call Trace: [<c010f270>] (unwind_backtrace) from [<c010b3d8>] (show_stack+0x10/0x14) [<c010b3d8>] (show_stack) from [<c034a4dc>] (dump_stack+0x84/0x98) [<c034a4dc>] (dump_stack) from [<c0118000>] (__warn+0xe8/0x100) [<c0118000>] (__warn) from [<c0118050>](warn_slowpath_fmt+0x38/0x48) [<c0118050>] (warn_slowpath_fmt) from [<c0442ec0>](dwc3_send_gadget_ep_cmd+0x304/0x308) [<c0442ec0>] (dwc3_send_gadget_ep_cmd) from [<c0445e68>](dwc3_ep0_start_trans+0x48/0xf4) [<c0445e68>] (dwc3_ep0_start_trans) from [<c0446750>](dwc3_ep0_out_start+0x64/0x80) [<c0446750>] (dwc3_ep0_out_start) from [<c04451c0>](__dwc3_gadget_start+0x1e0/0x278) [<c04451c0>] (__dwc3_gadget_start) from [<c04452e0>](dwc3_gadget_start+0x88/0x10c) [<c04452e0>] (dwc3_gadget_start) from [<c045ee54>](udc_bind_to_driver+0x88/0xbc) [<c045ee54>] (udc_bind_to_driver) from [<c045f29c>](usb_gadget_probe_driver+0xf8/0x140) [<c045f29c>] (usb_gadget_probe_driver) from [<bf005424>](gadget_dev_desc_UDC_store+0xac/0xc4 [libcomposite]) [<bf005424>] (gadget_dev_desc_UDC_store [libcomposite]) from[<c023d8e0>] (configfs_write_file+0xd4/0x160) [<c023d8e0>] (configfs_write_file) from [<c01d51e8>] (__vfs_write+0x1c/0x114) [<c01d51e8>] (__vfs_write) from [<c01d5ff4>] (vfs_write+0xa4/0x168) [<c01d5ff4>] (vfs_write) from [<c01d6d40>] (SyS_write+0x3c/0x90) [<c01d6d40>] (SyS_write) from [<c0107400>] (ret_fast_syscall+0x0/0x3c) Signed-off-by:
Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by:
-
Bo He authored
[ Upstream commit 01c10880 ] We see dwc3 endpoint stopped by unwanted irq during suspend resume test, which is caused dwc3 ep can't be started with error "No Resource". Here, add synchronize_irq before suspend to sync the pending IRQ handlers complete. Signed-off-by:
Bo He <bo.he@intel.com> Signed-off-by:
Yu Wang <yu.y.wang@intel.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 3fe931b3 ] The intel_soc_dts_iosf_init() function doesn't return NULL, it returns error pointers. Fixes: 4d0dd6c1 ("Thermal/int340x/processor_thermal: Enable auxiliary DTS for Braswell") Signed-off-by:
-
Marek Vasut authored
[ Upstream commit 2137a109 ] In case the upstream clock are not set, which can happen in case the VC5 has no valid upstream clock, the $src variable is used uninited by regmap_update_bits(). Check for this condition and return -EINVAL in such case. Note that in case the VC5 has no valid upstream clock, the VC5 can not operate correctly. That is a hardware property of the VC5. The internal oscilator present in some VC5 models is also considered upstream clock. Signed-off-by:
Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alexey Firago <alexey_firago@mentor.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-renesas-soc@vger.kernel.org [sboyd@kernel.org: Added comment about probe preventing this from happening in the first place] Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Yizhuo authored
[ Upstream commit 8c3590de ] Inside function rt274_i2c_probe(), if regmap_read() function returns -EINVAL, then local variable "val" leaves uninitialized but used in if statement. This is potentially unsafe. Signed-off-by:
Yizhuo <yzhai003@ucr.edu> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 678e2b44 ] The problem is seen in the q6asm_dai_compr_set_params() function: ret = q6asm_map_memory_regions(dir, prtd->audio_client, prtd->phys, (prtd->pcm_size / prtd->periods), ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ prtd->periods); In this code prtd->pcm_size is the buffer_size and prtd->periods comes from params->buffer.fragments. If we allow the number of fragments to be zero then it results in a divide by zero bug. One possible fix would be to use prtd->pcm_count directly instead of using the division to re-calculate it. But I decided that it doesn't really make sense to allow zero fragments. Signed-off-by:
-
Rander Wang authored
[ Upstream commit 906a9abc ] For some reason this field was set to zero when all other drivers use .dynamic = 1 for front-ends. This change was tested on Dell XPS13 and has no impact with the existing legacy driver. The SOF driver also works with this change which enables it to override the fixed topology. Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Kristian H. Kristensen authored
[ Upstream commit 99c66bc0 ] Prevents deadlock when fifo is full and reader closes file. Signed-off-by:
Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
