Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:

For all the boards included in this patchset, a similar set of changes
is proposed:

1) Move jack unassignment from platform_device->remove() to
   dai_link->exit(). This is done to make jack init and deinit flows
   symmetric
2) Remove platform_device->remove() function
3) Simplify card->suspend_pre() and card->resume_post() by making use of
   snd_soc_card_get_codec_dai() helper

While bdw_rt286 board - which is utilized by the catpt-driver - is
definitely not part of "avs", same treatment applies. And thus decided
to make it part of this series instead of sending it separately.

Add __maybe_unused tag for system PM ops suspend and resume.
This is required to fix allmodconfig compilation issue.

Fixes: a3a96e93 ("ASoC: qcom: lpass-sc7280: Add system suspend/resume PM ops")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/1669726428-3140-1-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for configuring sp and hs DAI from topology.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221129100102.826781-1-vsujithkumar.reddy@amd.corp-partner.google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge the fixes branch up so we can apply further AMD work.

Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.

Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-10-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Following commits will make use of it to find codec DAI, define it
first.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-9-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.

Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-8-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Following commits will make use of it to find codec DAI, define it
first.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-7-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.

Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-6-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

There is existing define for codec DAI name, make use of it when setting
codec DAI name.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-5-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.

Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-4-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.

Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-3-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.

Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-2-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

sc7180_lpass_dev_resume() logs an error if clk_bulk_prepare_enable()
fails. The clock framework already generates error logs if anything
goes wrong, so the logging in _resume() is redundant, drop it.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20221129001633.v2.1.I8d1993f41f0da1eac0ecba321678ac489f9c0b9b@changeidSigned-off-by: Mark Brown <broonie@kernel.org>

Update lpass sc7280 platform driver with PM ops, such as
system supend and resume callbacks.
This update is required to disable clocks during supend and
avoid XO shutdown issue.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Rahul Ajmeriya <quic_rajmeriy@quicinc.com>
Link: https://lore.kernel.org/r/1669703784-27589-1-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

If the device does not come straight from reset, we might receive an IRQ
before we are ready to handle it.

Fixes:

[    2.334737] Unable to handle kernel read from unreadable memory at virtual address 00000000000001e4
[    2.522601] Call trace:
[    2.525040]  regmap_read+0x1c/0x80
[    2.528434]  mt8173_afe_irq_handler+0x40/0xf0
...
[    2.598921]  start_kernel+0x338/0x42c
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Fixes: ee0bcaff ("ASoC: mediatek: Add AFE platform driver")
Link: https://lore.kernel.org/r/20221128-mt8173-afe-v1-0-70728221628f@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:

Adding sound support for Qualcomm SM8450 SoC (and later for SC8280XP) brought
some changes to APR/GPR services bindings.  These bindings are part of
qcom,apr.yaml:

  apr-or-gpr-device-node <- qcom,apr.yaml
    apr-gpr-service@[0-9] <- qcom,apr.yaml
      service-specific-components <- /schemas/sound/qcom,q6*.yaml

The schema for services (apr-gpr-service@[0-9]) was not complete and is still
quite not specific.  It allows several incorrect combinations, like adding a
clock-controller to a APM device.  Restricting it would complicate the schema
even more.  Bringing new support for sound on Qualcomm SM8450 and SC8280XP SoC
would grow it as well.

Refactor the bindings before extending them for Qualcomm SM8450 SoC.

Update lpass sc7180 platform driver with PM ops, such as
system supend and resume callbacks.
This update is required to disable clocks during supend and
avoid XO shutdown issue.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Rahul Ajmeriya <quic_rajmeriy@quicinc.com>
Link: https://lore.kernel.org/r/1669621742-28524-1-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

We found an corner case in RT5640 codec driver which schedules jack work
after system suspend as IRQ was enabled. Due to this, hitting the error
as register access happening after suspend as jack worker thread getting
scheduled in irq handler. The patch disables the irq during the suspend
to prevent the corner case happening.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Mohan Kumar D <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20221128070825.91215-1-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since commit 0166dc11 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20221127193549.211bf8f7@endymion.delvareSigned-off-by: Mark Brown <broonie@kernel.org>

For 8kHz and 16kHz sample rates and certain PCLK values
the codec can be programmed to operate in exact integer
mode. If available, use it to achieve the exact sample rate.
Signed-off-by: Pavel Dobias <dobias@2n.com>
Link: https://lore.kernel.org/r/20221123153818.24650-1-dobias@2n.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current rsnd_adg_clk_dbg_info() is using locak clk_name[] to ndicating
clk name, but we don't want to use local clk_name[] everywhere when we
support R-Car Gen4 sound to handling non compatible clk naming.

This patch uses __clk_get_name() instead of local clk_name[] for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8mz8wcs.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-9-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-8-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-7-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-6-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-5-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-4-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-3-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-2-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The vast majority of the current users of the SoundWire framework
have almost identical code for converting from hw_params to SoundWire
configuration. Whilst complex devices might require more, it is very
likely that most new devices will follow the same pattern. Save a
little code by factoring this out into a helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since commit 0166dc11 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20221127193441.0b54484d@endymion.delvareSigned-off-by: Mark Brown <broonie@kernel.org>

ADD HS and SP virtual DAI driver to support AMD platforms.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221123121911.3446224-4-vsujithkumar.reddy@amd.corp-partner.google.comSigned-off-by: Mark Brown <broonie@kernel.org>

By default clock source is selected as internal clock of 96Mhz
which is not configurable. Now we select the clock source to
external clock (ACLK) which can be configurable to different clock
ranges depending on usecase.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221123121911.3446224-3-vsujithkumar.reddy@amd.corp-partner.google.comSigned-off-by: Mark Brown <broonie@kernel.org>

By default the position updates are read from dsp box when streambox
size is not defined.if the streambox size is defined to some value
then position updates can be read from the streambox.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221123121911.3446224-2-vsujithkumar.reddy@amd.corp-partner.google.comSigned-off-by: Mark Brown <broonie@kernel.org>

On SM8450 and SC8280XP, the Q6APM is a bit different:
1. It is used as a platform DAI link, so it needs #sound-dai-cells.
2. It has two DAI children, so add new "bedais" node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221115120235.167812-12-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The Qualcomm DSP LPASS Audio DAIs are a bit different than Qualcomm DSP
Audio FrontEnd (Q6AFE) DAIs - they do not use children nodes for each
DAI.  None of other properties from qcom,q6dsp-lpass-ports.yaml apply
here as well, so move the qcom,q6apm-lpass-dais compatible to its own
binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221115120235.167812-11-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The APR/GPR bindings with services got complicated so move out the
Q6Core service to its own binding.  Previously the compatible was
documented in qcom,apr.yaml.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221115120235.167812-10-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The APR/GPR bindings with services got complicated so move out the Q6PRM
service to its own binding.  Previously the compatible was documented in
qcom,apr.yaml.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221115120235.167812-9-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The APR/GPR bindings with services got complicated so move out the Q6ASM
service to its own binding.  Previously the compatible was documented in
qcom,apr.yaml.  Move most of the examples from its children to this new
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221115120235.167812-8-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>