- 18 Apr, 2019 2 commits
-
-
Singh, Brijesh authored
Currently, we free the psp_master if the PLATFORM_INIT fails during the SEV FW probe. If psp_master is freed then driver does not invoke the PSP FW. As per SEV FW spec, there are several commands (PLATFORM_RESET, PLATFORM_STATUS, GET_ID etc) which can be executed in the UNINIT state We should not free the psp_master when PLATFORM_INIT fails. Fixes: 200664d5 ("crypto: ccp: Add SEV support") Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Gary Hook <gary.hook@amd.com> Cc: stable@vger.kernel.org # 4.19.y Signed-off-by:
Brijesh Singh <brijesh.singh@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Lionel Debieve authored
Change the wait condition to check if the hash is busy. Context can be saved as soon as hash has finishing processing data. Remove unused lock in the device structure. Signed-off-by:
Lionel Debieve <lionel.debieve@st.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
- 16 Apr, 2019 1 commit
-
-
Herbert Xu authored
This driver has been completely broken since the very beginning because it doesn't even have a setkey function. This means that nobody has ever used it as it would crash during setkey. This patch removes this driver. Fixes: d293b640 ("crypto: mxc-scc - add basic driver for the...") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
- 15 Apr, 2019 2 commits
-
-
Lionel Debieve authored
Add a default quality to hw_random device to be automatically set as new default entropy. Setting random quality will decrease the crng init time by switching to this hardware random source. Signed-off-by:
Lionel Debieve <lionel.debieve@st.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Lionel Debieve authored
No remove function implemented yet in the driver. Without remove function, the pm_runtime implementation complains when removing and probing again the driver. Signed-off-by:
Lionel Debieve <lionel.debieve@st.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
- 08 Apr, 2019 18 commits
-
-
Eric Biggers authored
Add a module parameter cryptomgr.panic_on_fail which causes the kernel to panic if any crypto self-tests fail. Use cases: - More easily detect crypto self-test failures by boot testing, e.g. on KernelCI. - Get a bug report if syzkaller manages to use the template system to instantiate an algorithm that fails its self-tests. The command-line option "fips=1" already does this, but it also makes other changes not wanted for general testing, such as disabling "unapproved" algorithms. panic_on_fail just does what it says. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
My patches to make testmgr fuzz algorithms against their generic implementation detected that the arm64 implementations of "cbcmac(aes)" handle empty messages differently from the cbcmac template. Namely, the arm64 implementations return the encrypted initial value, but the cbcmac template returns the initial value directly. This isn't actually a meaningful case because any user of cbcmac needs to prepend the message length, as CCM does; otherwise it's insecure. However, we should keep the behavior consistent; at the very least this makes testing easier. Do it the easy way, which is to change the arm64 implementations to have the same behavior as the cbcmac template. For what it's worth, ghash does things essentially the same way: it returns its initial value when given an empty message, even though in practice ghash is never passed an empty message. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
My patches to make testmgr fuzz algorithms against their generic implementation detected that the arm64 implementations of "cts(cbc(aes))" handle empty messages differently from the cts template. Namely, the arm64 implementations forbids (with -EINVAL) all messages shorter than the block size, including the empty message; but the cts template permits empty messages as a special case. No user should be CTS-encrypting/decrypting empty messages, but we need to keep the behavior consistent. Unfortunately, as noted in the source of OpenSSL's CTS implementation [1], there's no common specification for CTS. This makes it somewhat debatable what the behavior should be. However, all CTS specifications seem to agree that messages shorter than the block size are not allowed, and OpenSSL follows this in both CTS conventions it implements. It would also simplify the user-visible semantics to have empty messages no longer be a special case. Therefore, make the cts template return -EINVAL on *all* messages shorter than the block size, including the empty message. [1] https://github.com/openssl/openssl/blob/master/crypto/modes/cts128.cSigned-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
Don't cast the data buffer directly to streebog_uint512, as this violates alignment rules. Fixes: fe18957e ("crypto: streebog - add Streebog hash function") Cc: Vitaly Chikunov <vt@altlinux.org> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Vitaly Chikunov <vt@altlinux.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
If the rfc7539 template is instantiated with specific implementations, e.g. "rfc7539(chacha20-generic,poly1305-generic)" rather than "rfc7539(chacha20,poly1305)", then the implementation names end up included in the instance's cra_name. This is incorrect because it then prevents all users from allocating "rfc7539(chacha20,poly1305)", if the highest priority implementations of chacha20 and poly1305 were selected. Also, the self-tests aren't run on an instance allocated in this way. Fix it by setting the instance's cra_name from the underlying algorithms' actual cra_names, rather than from the requested names. This matches what other templates do. Fixes: 71ebc4d1 ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539") Cc: <stable@vger.kernel.org> # v4.2+ Cc: Martin Willi <martin@strongswan.org> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
skcipher_walk_done() assumes it's a bug if, after the "slow" path is executed where the next chunk of data is processed via a bounce buffer, the algorithm says it didn't process all bytes. Thus it WARNs on this. However, this can happen legitimately when the message needs to be evenly divisible into "blocks" but isn't, and the algorithm has a 'walksize' greater than the block size. For example, ecb-aes-neonbs sets 'walksize' to 128 bytes and only supports messages evenly divisible into 16-byte blocks. If, say, 17 message bytes remain but they straddle scatterlist elements, the skcipher_walk code will take the "slow" path and pass the algorithm all 17 bytes in the bounce buffer. But the algorithm will only be able to process 16 bytes, triggering the WARN. Fix this by just removing the WARN_ON(). Returning -EINVAL, as the code already does, is the right behavior. This bug was detected by my patches that improve testmgr to fuzz algorithms against their generic implementation. Fixes: b286d8b1 ("crypto: skcipher - Add skcipher walk interface") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
The ->digest() method of crct10dif-pclmul reads the current CRC value from the shash_desc context. But this value is uninitialized, causing crypto_shash_digest() to compute the wrong result. Fix it. Probably this wasn't noticed before because lib/crc-t10dif.c only uses crypto_shash_update(), not crypto_shash_digest(). Likewise, crypto_shash_digest() is not yet tested by the crypto self-tests because those only test the ahash API which only uses shash init/update/final. Fixes: 0b95a7f8 ("crypto: crct10dif - Glue code to cast accelerated CRCT10DIF assembly as a crypto transform") Cc: <stable@vger.kernel.org> # v3.11+ Cc: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
The ->digest() method of crct10dif-generic reads the current CRC value from the shash_desc context. But this value is uninitialized, causing crypto_shash_digest() to compute the wrong result. Fix it. Probably this wasn't noticed before because lib/crc-t10dif.c only uses crypto_shash_update(), not crypto_shash_digest(). Likewise, crypto_shash_digest() is not yet tested by the crypto self-tests because those only test the ahash API which only uses shash init/update/final. This bug was detected by my patches that improve testmgr to fuzz algorithms against their generic implementation. Fixes: 2d31e518 ("crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework") Cc: <stable@vger.kernel.org> # v3.11+ Cc: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/crypto/nx/nx-842.c: In function 'decompress': drivers/crypto/nx/nx-842.c:356:25: warning: variable 'dpadding' set but not used [-Wunused-but-set-variable] drivers/crypto/nx/nx-842-pseries.c: In function 'nx842_pseries_compress': drivers/crypto/nx/nx-842-pseries.c:299:15: warning: variable 'max_sync_size' set but not used [-Wunused-but-set-variable] drivers/crypto/nx/nx-842-pseries.c: In function 'nx842_pseries_decompress': drivers/crypto/nx/nx-842-pseries.c:430:15: warning: variable 'max_sync_size' set but not used [-Wunused-but-set-variable] They are not used any more and can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
YueHaibing authored
'err' is set in err path, but it's not returned to callers. Don't always return -EINPROGRESS, return err. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/crypto/marvell/hash.c: In function 'mv_cesa_ahash_pad_req': drivers/crypto/marvell/hash.c:138:15: warning: variable 'index' set but not used [-Wunused-but-set-variable] It's never used and can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
YueHaibing authored
Use kmemdup rather than duplicating its implementation Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Andi Kleen authored
cacheline_aligned is a special section. It cannot be const at the same time because it's not read-only. It doesn't give any MMU protection. Mark it ____cacheline_aligned to not place it in a special section, but just align it in .rodata Cc: herbert@gondor.apana.org.au Suggested-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Sebastian Andrzej Siewior authored
Two per-CPU variables are allocated as pointer to per-CPU memory which then are used as scratch buffers. We could be smart about this and use instead a per-CPU struct which contains the pointers already and then we need to allocate just the scratch buffers. Add a lock to the struct. By doing so we can avoid the get_cpu() statement and gain lockdep coverage (if enabled) to ensure that the lock is always acquired in the right context. On non-preemptible kernels the lock vanishes. It is okay to use raw_cpu_ptr() in order to get a pointer to the struct since it is protected by the spinlock. The diffstat of this is negative and according to size scompress.o: text data bss dec hex filename 1847 160 24 2031 7ef dbg_before.o 1754 232 4 1990 7c6 dbg_after.o 1799 64 24 1887 75f no_dbg-before.o 1703 88 4 1795 703 no_dbg-after.o The overall size increase difference is also negative. The increase in the data section is only four bytes without lockdep. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Sebastian Andrzej Siewior authored
If scomp_acomp_comp_decomp() fails to allocate memory for the destination then we never copy back the data we compressed. It is probably best to return an error code instead 0 in case of failure. I haven't found any user that is using acomp_request_set_params() without the `dst' buffer so there is probably no harm. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Singh, Brijesh authored
The current definition and implementation of the SEV_GET_ID command does not provide the length of the unique ID returned by the firmware. As per the firmware specification, the firmware may return an ID length that is not restricted to 64 bytes as assumed by the SEV_GET_ID command. Introduce the SEV_GET_ID2 command to overcome with the SEV_GET_ID limitations. Deprecate the SEV_GET_ID in the favor of SEV_GET_ID2. At the same time update SEV API web link. Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Gary Hook <gary.hook@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Nathaniel McCallum <npmccallum@redhat.com> Signed-off-by:
Brijesh Singh <brijesh.singh@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Dan Carpenter authored
create_caam_req_fq() doesn't return NULL pointers so there is no need to check. The NULL checks are problematic because it's hard to say how a NULL return should be handled, so removing the checks is a nice cleanup. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Nagadheeraj Rottela authored
Added rfc4106(gcm(aes)) cipher. Signed-off-by:
Nagadheeraj Rottela <rnagadheeraj@marvell.com> Reviewed-by:
Srikanth Jampala <jsrikanth@marvell.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
- 28 Mar, 2019 12 commits
-
-
Iuliana Prodan authored
Some i.MX6 devices (imx6D, imx6Q, imx6DL, imx6S, imx6DP and imx6DQ) have an issue wherein AXI bus transactions may not occur in the correct order. This isn't a problem running single descriptors, but can be if running multiple concurrent descriptors. Reworking the CAAM driver to throttle to single requests is impractical, so this patch limits the AXI pipeline to a depth of one (from a default of 4) to preclude this situation from occurring. This patch applies to known affected platforms. Signed-off-by:
Radu Solea <radu.solea@nxp.com> Signed-off-by:
Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Vakul Garg authored
In caam_jr_enqueue(), a write barrier is needed to order stores to job ring slot before declaring addition of new job into input job ring. The register write is done using wr_reg32() which internally uses iowrite32() for write operation. The api iowrite32() issues a write barrier before issuing write operation. Therefore, the wmb() preceding wr_reg32() can be safely removed. Signed-off-by:
Vakul Garg <vakul.garg@nxp.com> Reviewed-by:
Horia Geanta <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Vakul Garg authored
For each job ring, the variable 'ringsize' is initialised but never used. Similarly variables 'inp_ring_write_index' and 'head' always track the same value and instead of 'inp_ring_write_index', caam_jr_enqueue() can use 'head' itself. Both these variables have been removed. Signed-off-by:
Vakul Garg <vakul.garg@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Vakul Garg authored
For each job ring pair, the output ring is processed exactly by one cpu at a time under a tasklet context (one per ring). Therefore, there is no need to protect a job ring's access & its private data structure using a lock. Hence the lock can be removed. Signed-off-by:
Vakul Garg <vakul.garg@nxp.com> Reviewed-by:
Horia Geanta <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
YueHaibing authored
Fix sparse warnings: drivers/crypto/vmx/vmx.c:44:12: warning: symbol 'p8_init' was not declared. Should it be static? drivers/crypto/vmx/vmx.c:70:13: warning: symbol 'p8_exit' was not declared. Should it be static? Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Geert Uytterhoeven authored
Fixes: ccb778e1 ("crypto: api - Add fips_enable flag") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
YueHaibing authored
Fix sparse warning: drivers/crypto/cavium/cpt/cptvf_main.c:644:6: warning: symbol 'cptvf_device_init' was not declared. Should it be static? Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
YueHaibing authored
It's never used since introduction in commit 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
YueHaibing authored
Fix following sparse warnings: drivers/crypto/cavium/zip/zip_crypto.c:72:5: warning: symbol 'zip_ctx_init' was not declared. Should it be static? drivers/crypto/cavium/zip/zip_crypto.c:110:6: warning: symbol 'zip_ctx_exit' was not declared. Should it be static? drivers/crypto/cavium/zip/zip_crypto.c:122:5: warning: symbol 'zip_compress' was not declared. Should it be static? drivers/crypto/cavium/zip/zip_crypto.c:158:5: warning: symbol 'zip_decompress' was not declared. Should it be static? Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
YueHaibing authored
Fix sparse warning: drivers/crypto/ccp/ccp-crypto-rsa.c:251:5: warning: symbol 'ccp_register_rsa_alg' was not declared. Should it be static? Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
YueHaibing authored
Fix sparse warnings: drivers/crypto/cavium/cpt/cptvf_reqmanager.c:226:5: warning: symbol 'send_cpt_command' was not declared. Should it be static? drivers/crypto/cavium/cpt/cptvf_reqmanager.c:273:6: warning: symbol 'do_request_cleanup' was not declared. Should it be static? drivers/crypto/cavium/cpt/cptvf_reqmanager.c:319:6: warning: symbol 'do_post_process' was not declared. Should it be static? Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
YueHaibing authored
cptvf_mbox_send_ack and cptvf_mbox_send_nack are never used since introdution in commit c694b233 ("crypto: cavium - Add the Virtual Function driver for CPT") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
- 22 Mar, 2019 5 commits
-
-
Ondrej Mosnacek authored
Spotted while reviewind patches from Eric Biggers. Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
In salsa20_docrypt(), use crypto_xor_cpy() instead of crypto_xor(). This avoids having to memcpy() the src buffer to the dst buffer. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
In chacha_docrypt(), use crypto_xor_cpy() instead of crypto_xor(). This avoids having to memcpy() the src buffer to the dst buffer. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Daniel Axtens authored
The original assembly imported from OpenSSL has two copy-paste errors in handling CTR mode. When dealing with a 2 or 3 block tail, the code branches to the CBC decryption exit path, rather than to the CTR exit path. This leads to corruption of the IV, which leads to subsequent blocks being corrupted. This can be detected with libkcapi test suite, which is available at https://github.com/smuellerDD/libkcapiReported-by:
Ondrej Mosnáček <omosnacek@gmail.com> Fixes: 5c380d62 ("crypto: vmx - Add support for VMS instructions by ASM") Cc: stable@vger.kernel.org Signed-off-by:
Daniel Axtens <dja@axtens.net> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Tested-by:
Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Arnd Bergmann authored
Building with clang for a 32-bit architecture runs over the stack frame limit in the setkey function: drivers/crypto/ccree/cc_cipher.c:318:12: error: stack frame size of 1152 bytes in function 'cc_cipher_setkey' [-Werror,-Wframe-larger-than=] The problem is that there are two large variables: the temporary 'tmp' array and the SHASH_DESC_ON_STACK() declaration. Moving the first into the block in which it is used reduces the total frame size to 768 bytes, which seems more reasonable and is under the warning limit. Fixes: 63ee04c8 ("crypto: ccree - add skcipher support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-By:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-