- 09 Dec, 2013 5 commits
-
-
Adrian Hunter authored
'SIZE_MAX / page_size' is an upper limit for the maximum number of mmap pages, not a lower limit. Change the condition accordingly. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1386595120-22978-3-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Adrian Hunter authored
Signed-off-by:
-
Adrian Hunter authored
'mmap_pages' is 'unsigned int' not 'int' e.g. perf record -m2147483648 uname Permission error mapping pages. Consider increasing /proc/sys/kernel/perf_event_mlock_kb, or try again with a smaller value of -m/--mmap_pages. (current value: -2147483648) Fixed: perf record -m2147483648 uname Permission error mapping pages. Consider increasing /proc/sys/kernel/perf_event_mlock_kb, or try again with a smaller value of -m/--mmap_pages. (current value: 2147483648) Signed-off-by:
-
Adrian Hunter authored
Add field 'srcline' that displays the source file name and line number associated with the sample ip. The information displayed is the same as from addr2line. $ perf script -f comm,tid,pid,time,ip,sym,dso,symoff,srcline grep 10701/10701 2497321.421013: ffffffff81043ffa native_write_msr_safe+0xa ([kernel.kallsyms]) /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/msr.h:95 grep 10701/10701 2497321.421984: ffffffff8165b6b3 _raw_spin_lock+0x13 ([kernel.kallsyms]) /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/spinlock.h:54 grep 10701/10701 2497321.421990: ffffffff810b64b3 tick_sched_timer+0x53 ([kernel.kallsyms]) /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/time/tick-sched.c:840 grep 10701/10701 2497321.421992: ffffffff8106f63f run_timer_softirq+0x2f ([kernel.kallsyms]) /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/timer.c:1372 Signed-off-by: -
Adrian Hunter authored
The address being used to calculate the offset was the memory address but the address needed is the address mapped to the dso. i.e. the 'addr' member of 'struct addr_location' Signed-off-by:
David Ahern <dsahern@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1386315778-11633-2-git-send-email-adrian.hunter@intel.comSigned-off-by:
-
- 06 Dec, 2013 1 commit
-
-
Steven Rostedt authored
When Jiri Olsa was writing a function callback for scsi_trace_parse_cdb(), he thought that the traceevent library had a bug in it because he was getting this error: Error: expected ')' but read ',' Error: expected ')' but read ',' Error: expected ')' but read ',' Error: expected ')' but read ',' But in truth, he didn't have the write number of arguments for the function callback, and the error was the library detecting the discrepancy. A better error message would have prevented the confusion: Error: function 'scsi_trace_parse_cdb()' only expects 2 arguments but event scsi_dispatch_cmd_timeout has more Error: function 'scsi_trace_parse_cdb()' only expects 2 arguments but event scsi_dispatch_cmd_start has more Error: function 'scsi_trace_parse_cdb()' only expects 2 arguments but event scsi_dispatch_cmd_error has more Error: function 'scsi_trace_parse_cdb()' only expects 2 arguments but event scsi_dispatch_cmd_done has more Or Error: function 'scsi_trace_parse_cdb()' expects 4 arguments but event scsi_dispatch_cmd_timeout only uses 3 Error: function 'scsi_trace_parse_cdb()' expects 4 arguments but event scsi_dispatch_cmd_start only uses 3 Error: function 'scsi_trace_parse_cdb()' expects 4 arguments but event scsi_dispatch_cmd_error only uses 3 Error: function 'scsi_trace_parse_cdb()' expects 4 arguments but event scsi_dispatch_cmd_done only uses 3 Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-a4c34w62vl0diitvxb7bt3er@git.kernel.orgSigned-off-by:
-
- 05 Dec, 2013 2 commits
-
-
David Ahern authored
Getting a divide by 0 when events are processed from a file: perf trace -i perf.data -s ... dnsmasq (1684), 10 events, inf%, 0.000 msec The problem is that the event count is not incremented as events are processed. With this patch: perf trace -i perf.data -s ... dnsmasq (1684), 10 events, 8.9%, 0.000 msec Signed-off-by:
-
David Ahern authored
Older kernels (e.g., RHEL6) do system call tracing via syscalls:sys_{enter,exit} rather than raw_syscalls. Update perf-trace to detect lack of raw_syscalls support and try syscalls. Signed-off-by:
-
- 04 Dec, 2013 32 commits
-
-
Jiri Olsa authored
Adding is_writable_pte print helper function, so the kvmmmu:fast_page_fault print format gets resolved properly. The diff of 'perf script' output generated by old and new code: (data was generated by 'perf record -e 'kvm:*,kvmmmu:*' -a') --- script.kvm.old +++ script.kvm.new - qemu-system-x86 3290 [002] 10708.755312: kvmmmu:fast_page_fault: [FAILED TO PARSE] vcpu_id=0 gva=4094486080 error_code=3 sptep=0xffff88019f1e3670 old_spte=336391285 new_spte=336391287 retry=1 + qemu-system-x86 3290 [002] 10708.755312: kvmmmu:fast_page_fault: vcpu 0 gva f40ce640 error_code P|W sptep 0xffff88019f1e3670 old 0x140cec75 new 140cec77 spurious 0 fixed 1 Signed-off-by:
-
Jiri Olsa authored
Removing malloc_or_die calls from plugin_function.c, replacing them and factoring the code with standard realloc and error path. Suggested-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
Jiri Olsa authored
Several cleanups suggested by Namhyung: * Remove index field from struct func_stack as it's not needed. * Rename get_index into add_and_get_index. * Use '%*X' format string capability instead of the loop Suggested-by:
-
Jiri Olsa authored
The pevent_print_func_field function encompasses all the functionality used in the hrtimer_start handler. Change the handler to use this function. This also unifies the function field output with the hrtimer_expire_entry handler. Suggested-by:
-
Jiri Olsa authored
There's no need for following functions to be global: process_jbd2_dev_to_name process_jiffies_to_msecs Make them static. Signed-off-by:
-
Jiri Olsa authored
Removing malloc_or_die calls from event-plugin.c, replacing them with standard malloc and error path. Suggested-by:
-
Jiri Olsa authored
Adding cfg80211 plugin. This plugin adds handler for __le16_to_cpup function t properly parse following tracepoint events: cfg80211:cfg80211_tx_mlme_mgmt cfg80211:cfg80211_rx_mlme_mgmt cfg80211:cfg80211_rx_unprot_mlme_mgmt The diff of 'perf script' output generated by old and new code: (data was generated by 'perf record -e 'cfg80211:*' -a') --- script.cfg80211.old +++ script.cfg80211.new - ifconfig 2705 [003] 662.896560: cfg80211:cfg80211_tx_mlme_mgmt: [FAILED TO PARSE] name=wlan0 ifindex=3 frame=ARRAY[c0, 00, 00, 00, 00, 3a, 98, a0, 30, 51, 10, 0b, a9, c6, f4, 74, 00, 3a, 98, a0, 30, 51, 00, 00, 03, 00] + ifconfig 2705 [003] 662.896560: cfg80211:cfg80211_tx_mlme_mgmt: netdev:wlan0(3), ftype:0xc0 - kworker/u16:0 1697 [002] 664.808210: cfg80211:cfg80211_rx_mlme_mgmt: [FAILED TO PARSE] name=wlan0 ifindex=3 frame=ARRAY[b0, 00, da, 00, 10, 0b, a9, c6, f4, 74, d8, 24, bd, a1, 26, 31, d8, 24, bd, a1, 26, 31, 10, b7, 00, 00, 02, 00, 00, 00] + kworker/u16:0 1697 [002] 664.808210: cfg80211:cfg80211_rx_mlme_mgmt: netdev:wlan0(3), ftype:0xb0 Signed-off-by:
-
Jiri Olsa authored
Adding scsi plugin. This plugin adds fields resolving functions for following tracepoint events: scsi:scsi_dispatch_cmd_start scsi:scsi_dispatch_cmd_error scsi:scsi_dispatch_cmd_done scsi:scsi_dispatch_cmd_timeout The diff of 'perf script' output generated by old and new code: (data was generated by 'perf record -e 'scsi:scsi_dispatch_cmd*' -a) - swapper 0 [000] 6620.491019: scsi:scsi_dispatch_cmd_done: [FAILED TO PARSE] host_no=0 channel=0 id=0 lun=0 result=0 opcode=53 cmd_len=10 data_sglen=0 prot_sglen=0 prot_op=0 cmnd=5 + swapper 0 [000] 6620.491019: scsi:scsi_dispatch_cmd_done: host_no=0 channel=0 id=0 lun=0 data_sgl=0 prot_sgl=0 prot_op=SCSI_PROT_NORMAL cmnd=(SYNCHRONIZE_CACHE - raw=35 00 00 00 00 00 00 00 00 00) result=(driver=DRIVER_OK host=DID_OK message=COMMAND_COMPLETE status=SAM_STAT_GOOD) - kworker/0:0 21554 [000] 6620.491126: scsi:scsi_dispatch_cmd_start: [FAILED TO PARSE] host_no=0 channel=0 id=0 lun=0 opcode=42 cmd_len=10 data_sglen=1 prot_sglen=0 prot_op=0 cmnd=* + kworker/0:0 21554 [000] 6620.491126: scsi:scsi_dispatch_cmd_start: host_no=0 channel=0 id=0 lun=0 data_sgl=1 prot_sgl=0 prot_op=SCSI_PROT_NORMAL cmnd=(WRITE_10 lba=570899168 txlen=8 protect=0 raw=2a 00 22 07 3a e0 00 00 08 00) - jbd2/dm-3-8 593 [002] 6621.607992: scsi:scsi_dispatch_cmd_error: [FAILED TO PARSE] host_no=0 channel=0 id=0 lun=0 rtn=4182 opcode=53 cmd_len=10 data_sglen=0 prot_sglen=0 prot_op=0 cmnd=5 + jbd2/dm-3-8 593 [002] 6621.607992: scsi:scsi_dispatch_cmd_error: host_no=0 channel=0 id=0 lun=0 data_sgl=0 prot_sgl=0 prot_op=SCSI_PROT_NORMAL cmnd=(SYNCHRONIZE_CACHE - raw=35 00 00 00 00 00 00 00 00 00) rtn=4182 NOTE I couldn't generate scsi_dispatch_cmd_timeout tracepoint, but it's similar to the rest, so I believe it's ok. Signed-off-by: -
Jiri Olsa authored
Adding xen plugin. This plugin adds fields resolving for following tracepoint events: xen:xen_mc_entry xen:xen_mc_extend_args The diff of 'perf script' output generated by old and new code: (data was generated by 'perf record -e 'xen:*' ls') --- script.xen.old +++ script.xen.new - swapper 0 [002] 136.267492: xen:xen_mc_entry: [FAILED TO PARSE] op=3 nargs=2 args=ARRAY[18, 00, 00, 00, 00, 00, 00, 00, 00, e0, d4, 4b, 04, 88, ff, ff, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00] + swapper 0 [002] 136.267492: xen:xen_mc_entry: op 3(stack_switch) args [18, 0, 0, 0, 0, 0] - perf 1970 [008] 136.273319: xen:xen_mc_extend_args: [FAILED TO PARSE] op=1 args=16 res=1 + perf 1970 [008] 136.273319: xen:xen_mc_extend_args: extending op 1(mmu_update) by 16 bytes res ??? NOTE We still do not handle the 'sizeof' and fail to parse following xen tracepoints: xen:xen_mmu_set_pte xen:xen_mmu_set_pte_atomic xen:xen_mmu_set_domain_pte xen:xen_mmu_set_pte_at xen:xen_mmu_set_pmd xen:xen_mmu_set_pud xen:xen_mmu_set_pgd xen:xen_mmu_ptep_modify_prot_start xen:xen_mmu_ptep_modify_prot_commit Signed-off-by:
-
Jiri Olsa authored
Backporting function plugin. Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb): git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This plugin adds function and parent function fields resolving for ftrace:function tracepoint event. The diff of 'perf script' output generated by old and new code: (data was generated by 'perf record -e ftrace:function ls') --- script.function.old +++ script.function.new - ls 10781 [001] 32667.291379: ftrace:function: ffffffff811adb80 <-- ffffffff811afc48 - ls 10781 [001] 32667.291379: ftrace:function: ffffffff811b35d0 <-- ffffffff811adb9b - ls 10781 [001] 32667.291380: ftrace:function: ffffffff811b3520 <-- ffffffff811b35e8 - ls 10781 [001] 32667.291380: ftrace:function: ffffffff811b2720 <-- ffffffff811b3549 - ls 10781 [001] 32667.291381: ftrace:function: ffffffff81297e10 <-- ffffffff811b356c - ls 10781 [001] 32667.291381: ftrace:function: ffffffff81298f40 <-- ffffffff81297e2c - ls 10781 [001] 32667.291382: ftrace:function: ffffffff81076160 <-- ffffffff811afbf0 - ls 10781 [001] 32667.291383: ftrace:function: ffffffff811c3eb0 <-- ffffffff811afbfc - ls 10781 [001] 32667.291383: ftrace:function: ffffffff8164e100 <-- ffffffff811c3ed8 - ls 10781 [001] 32667.291384: ftrace:function: ffffffff811a5d10 <-- ffffffff811c3f53 - ls 10781 [001] 32667.291384: ftrace:function: ffffffff811e8e70 <-- ffffffff811a5d58 - ls 10781 [001] 32667.291385: ftrace:function: ffffffff811f38e0 <-- ffffffff811a5d63 - ls 10781 [001] 32667.291385: ftrace:function: ffffffff811a9ff0 <-- ffffffff811a5d6b - ls 10781 [001] 32667.291386: ftrace:function: ffffffff811a9fa0 <-- ffffffff811aa015 - ls 10781 [001] 32667.291387: ftrace:function: ffffffff810851c0 <-- ffffffff811aa053 - ls 10781 [001] 32667.291387: ftrace:function: ffffffff81090e00 <-- ffffffff81085211 + ls 10781 [001] 32667.291379: ftrace:function: would_dump <-- setup_new_exec + ls 10781 [001] 32667.291379: ftrace:function: inode_permission <-- would_dump + ls 10781 [001] 32667.291380: ftrace:function: __inode_permission <-- inode_permission + ls 10781 [001] 32667.291380: ftrace:function: generic_permission <-- __inode_permission + ls 10781 [001] 32667.291381: ftrace:function: security_inode_permission <-- __inode_permission + ls 10781 [001] 32667.291381: ftrace:function: cap_inode_permission <-- security_inode_permission + ls 10781 [001] 32667.291382: ftrace:function: flush_signal_handlers <-- setup_new_exec + ls 10781 [001] 32667.291383: ftrace:function: do_close_on_exec <-- setup_new_exec + ls 10781 [001] 32667.291383: ftrace:function: _raw_spin_lock <-- do_close_on_exec + ls 10781 [001] 32667.291384: ftrace:function: filp_close <-- do_close_on_exec + ls 10781 [001] 32667.291384: ftrace:function: dnotify_flush <-- filp_close + ls 10781 [001] 32667.291385: ftrace:function: locks_remove_posix <-- filp_close + ls 10781 [001] 32667.291385: ftrace:function: fput <-- filp_close + ls 10781 [001] 32667.291386: ftrace:function: file_sb_list_del <-- fput + ls 10781 [001] 32667.291387: ftrace:function: task_work_add <-- fput + ls 10781 [001] 32667.291387: ftrace:function: kick_process <-- task_work_add Removing options support as it's not backported yet. Currently this plugin supports 2 options: 'parent' to display parent function 'indent' to show function call indents Enabling both of them by default. Signed-off-by:
-
Jiri Olsa authored
Backporting sched_switch plugin. Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb): git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This plugin adds fields resolving for sched:sched_switch tracepoint event. The diff of 'perf script' output generated by old and new code: (data was generated by 'perf record -e sched:sched_switch -a') --- script.sched_switch.old +++ script.sched_switch.new - perf 577 [002] 30965.311852: sched:sched_switch: prev_comm=perf prev_pid=577 prev_prio=120 prev_state=S ==> next_comm=swapper/2 next_pid=0 next_prio=120 + perf 577 [002] 30965.311852: sched:sched_switch: perf:577 [120] S ==> swapper/2:0 [120] Signed-off-by:
-
Jiri Olsa authored
Backporting mac80211 plugin. Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb): git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This plugin adds changed field resolving for mac80211:drv_bss_info_changed tracepoint event. The diff of 'perf script' output generated by old and new code: (data was generated by 'perf record -e 'mac80211:drv_bss_info_changed' -a') --- script.mac80211.old +++ script.mac80211.new - ifconfig 3711 [000] 1290.446492: mac80211:drv_bss_info_changed: phy0 vif:wlan0(2) changed:0x309f + ifconfig 3711 [000] 1290.446492: mac80211:drv_bss_info_changed: phy0 vif:wlan0(2) + assoc:0 aid:2 cts:0 shortpre:0 shortslot:0 dtimper:1 + bcnint:102 assoc_cap:0x431 basic_rates:0xf enable_beacon:0 + ht_operation_mode:0 Omitting the mac80211:drv_config tracepoint handling because the kernel tracepoint changed its prototype and the plugin handler is no longer working. Signed-off-by:
-
Jiri Olsa authored
Backporting kvm plugin. Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb): git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This plugin adds field resolving functions for following tracepoint events: kvm:kvm_exit kvm:kvm_emulate_insn kvm:kvm_nested_vmexit kvm:kvm_nested_vmexit_inject kvmmmu:kvm_mmu_get_page kvmmmu:kvm_mmu_sync_page kvmmmu:kvm_mmu_unsync_page kvmmmu:kvm_mmu_zap_page kvmmmu:kvm_mmu_prepare_zap_page The diff of 'perf script' output generated by old and new code: (data was generated by 'perf record -e 'kvm:*,kvmmmu:*' -a') --- script.kvm.old +++ script.kvm.new qemu-system-x86 17414 [000] 6868.995053: kvm:kvm_exit: reason EPT_VIOLATION rip 0xfff0 info 184 0 qemu-system-x86 17414 [000] 6868.995109: kvm:kvm_emulate_insn: f0000:c46b:e4 71 (real) - qemu-system-x86 3006 [002] 10562.079422: kvmmmu:kvm_mmu_get_page: [FAILED TO PARSE] mmu_valid_gen=0x2 gfn=0 role=122884 root_count=0 unsync=0 created=1 + qemu-system-x86 3006 [002] 10562.079422: kvmmmu:kvm_mmu_get_page: new sp gfn 0 0/4 q0 direct --- !pge !nxe root 0 sync - qemu-system-x86 3006 [002] 10562.080502: kvmmmu:kvm_mmu_prepare_zap_page: [FAILED TO PARSE] mmu_valid_gen=0x2 gfn=0 role=122884 root_count=1 unsync=0 + qemu-system-x86 3006 [002] 10562.080502: kvmmmu:kvm_mmu_prepare_zap_page: 0/4 q0 direct --- !pge !nxe root 1 sync qemu-system-x86 3290 [002] 10708.755312: kvmmmu:fast_page_fault: [FAILED TO PARSE] vcpu_id=0 gva=4094486080 error_code=3 sptep=0xffff88019f1e3670 old_spte=336391285 new_spte=336391287 retry=1 - insmod 2576 [001] 781.731666: kvmmmu:kvm_mmu_sync_page: [FAILED TO PARSE] mmu_valid_gen=0x1 gfn=2 role=24624 root_count=10 unsync=1 + insmod 2576 [001] 781.731666: kvmmmu:kvm_mmu_sync_page: 3/0 q0 --- !pge !nxe root 10 unsync - insmod 2576 [001] 781.731668: kvmmmu:kvm_mmu_unsync_page: [FAILED TO PARSE] mmu_valid_gen=0x1 gfn=2 role=24624 root_count=10 unsync=1 + insmod 2576 [001] 781.731668: kvmmmu:kvm_mmu_unsync_page: 3/0 q0 --- !pge !nxe root 10 unsync Note: - kvm_mmu_zap_page is replaced by kvm_mmu_prepare_zap_page in current kernel, keeping it for backward compatibility - some of the tracepoints keep the same output even with the plugin handling: kvm:kvm_exit, kvm:kvm_emulate_insn - the 'kvmmmu:fast_page_fault' is still broken because of missing is_writable_pte function and is fixed in another patch - ommited following tracepoints from backport because the output was buggy kvm:kvm_nested_vmexit kvm:kvm_nested_vmexit_inject Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1386076182-14484-16-git-send-email-jolsa@redhat.comSigned-off-by:
-
Jiri Olsa authored
Backporting kmem plugin. Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb): git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This plugin adds call_site field resolving for following tracepoint events: kmem:kfree kmem:kmalloc kmem:kmalloc_node kmem:kmem_cache_alloc kmem:kmem_cache_alloc_node kmem:kmem_cache_free The diff of 'perf script' output generated by old and new code: (data was generated by 'perf record -e 'kmem:*' -a') --- script.kmem.old +++ script.kmem.new - perf 27846 [001] 29643.403319: kmem:kfree: call_site=ffffffff810e64f6 ptr=(nil) + perf 27846 [001] 29643.403238: kmem:kfree: (__audit_syscall_exit+0x1f6) call_site=ffffffff810e64f6 ptr=(nil) - perf 27846 [001] 29643.403337: kmem:kmem_cache_alloc: call_site=ffffffff812ff0c5 ptr=0xffff88020e155630 bytes_req=560 bytes_alloc=568 gfp_flags=GFP_KERNEL + perf 27846 [001] 29643.403337: kmem:kmem_cache_alloc: (radix_tree_preload+0x35) call_site=ffffffff812ff0c5 ptr=0xffff88020e155630 bytes_req=560 bytes_alloc=568 gfp_flags=GFP_KERNEL - perf 27846 [001] 29643.403342: kmem:kmem_cache_free: call_site=ffffffff8126ec61 ptr=0xffff88020dffe750 + perf 27846 [001] 29643.403342: kmem:kmem_cache_free: (jbd2_journal_stop+0x221) call_site=ffffffff8126ec61 ptr=0xffff88020dffe750 - firefox 954 [000] 29643.445477: kmem:kmem_cache_alloc_node: call_site=ffffffff8153c64e ptr=0xffff8801cecb4000 bytes_req=256 bytes_alloc=256 gfp_flags=GFP_KERNEL|GFP_REPEAT node=-1 + firefox 954 [000] 29643.445477: kmem:kmem_cache_alloc_node: (__alloc_skb+0x4e) call_site=ffffffff8153c64e ptr=0xffff8801cecb4000 bytes_req=256 bytes_alloc=256 gfp_flags=GFP_KERNEL|GFP_REPEAT node=-1 - perf 27846 [001] 29643.445510: kmem:kmalloc: call_site=ffffffff81250642 ptr=0xffff88020fd6c300 bytes_req=96 bytes_alloc=96 gfp_flags=GFP_NOFS|GFP_ZERO + perf 27846 [001] 29643.445510: kmem:kmalloc: (ext4_ext_find_extent+0x362) call_site=ffffffff81250642 ptr=0xffff88020fd6c300 bytes_req=96 bytes_alloc=96 gfp_flags=GFP_NOFS|GFP_ZERO - X 888 [002] 29643.445546: kmem:kmalloc_node: call_site=ffffffff8153c67e ptr=0xffff880103828e00 bytes_req=384 bytes_alloc=512 gfp_flags=GFP_KERNEL|GFP_NOWARN|GFP_REPEAT|GFP_NOMEMALLOC node=-1 + X 888 [002] 29643.445546: kmem:kmalloc_node: (__alloc_skb+0x7e) call_site=ffffffff8153c67e ptr=0xffff880103828e00 bytes_req=384 bytes_alloc=512 gfp_flags=GFP_KERNEL|GFP_NOWARN|GFP_REPEAT|GFP_NOMEMALLOC node=-1 Signed-off-by:
-
Jiri Olsa authored
Backporting hrtimer plugin. Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb): git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This plugin adds function field resolving for following tracepoint events: timer:hrtimer_expire_entry timer:hrtimer_start The diff of 'perf script' output generated by old and new code: (data was generated by 'perf record -e 'timer:hrtimer*' -a') --- script.hrtimer.old +++ script.hrtimer.new - swapper 0 [000] 27405.519092: timer:hrtimer_start: [FAILED TO PARSE] hrtimer=0xffff88021e20e800 function=0xffffffff810c0e10 expires=27398383000000 softexpires=27398383000000 + swapper 0 [000] 27405.519103: timer:hrtimer_start: hrtimer=0xffff88021e20e800 function=tick_sched_timer expires=27398383000000 softexpires=27398383000000 - swapper 0 [001] 27405.519544: timer:hrtimer_expire_entry: [FAILED TO PARSE] hrtimer=0xffff880211334058 now=27398294182491 function=0xffffffff81086f20 + swapper 0 [001] 27405.519544: timer:hrtimer_expire_entry: hrtimer=0xffff880211334058 now=27398294182491 function=posix_timer_fn/0x0 Check the 'function' field is translated into the function name. Signed-off-by:
-
Jiri Olsa authored
Backporting jbd2 plugin. Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb): git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This plugin adds field resolving functions for following tracepoint events: jbd2:jbd2_checkpoint_stats jbd2:jbd2_run_stats The diff of 'perf script' output generated by old and new code: (data was generated by 'perf record -e 'jbd2:jbd2_run_stats,jbd2:jbd2_checkpoint_stats' -a') --- script.jbd2.old +++ script.jbd2.new - jbd2/dm-3-8 576 [000] 2983.748423: jbd2:jbd2_checkpoint_stats: [FAILED TO PARSE] dev=265289731 tid=0x3f2bbb chp_time=0x0 forced_to_close=0 written=0 dropped=2 + jbd2/dm-3-8 576 [000] 2983.748423: jbd2:jbd2_checkpoint_stats: dev 253,3 tid 4139963 chp_time 0 forced_to_close 0 written 0 dropped 2 - jbd2/dm-3-8 576 [000] 2983.852789: jbd2:jbd2_run_stats: [FAILED TO PARSE] dev=265289731 tid=0x3f2bc0 wait=0x0 request_delay=0x0 running=0x138d locked=0x0 flushing=0x0 logging=0x68 handle_count=2995 blocks=17 blocks_logged=18 + jbd2/dm-3-8 576 [000] 2983.852789: jbd2:jbd2_run_stats: dev 253,3 tid 4139968 wait 0 request_delay 0 running 5005 locked 0 flushing 0 logging 104 handle_count 2995 blocks 17 blocks_logged 18 This plugin also adds jbd2_dev_to_name function, which was removed from jdb2 tracepoints recently. Keeping it in for backward compatibility reasons. Signed-off-by:
-
Jiri Olsa authored
The traceevent lib uses pr_stat to display all standard info. It's defined as __weak. Overloading it with perf version plugged into perf output system logic. Displaying the pr_stat stuff under '-v' option. Signed-off-by:
-
Jiri Olsa authored
In order to get the proper plugins processing we need to use full trace-event interface when creating tracepoint events. So far we were using shortcut to get the parsed format. Moving current 'event_format__new' function into trace-event object as 'trace_event__tp_format'. This function uses properly initialized global trace-event object, ensuring proper plugins processing. Signed-off-by:
-
Jiri Olsa authored
Add trace-event object to keep together 'struct pevent' object with its loaded plugins with following interface: int trace_event__init(struct trace_event *t); - Initalizes 'struct pevent' object and loads plugins for it void trace_event__cleanup(struct trace_event *t); - Cleanups both 'struct pevent' and plugins Signed-off-by:
-
Jiri Olsa authored
Adding filename__read_str util function to read text file and return it in the char array. The interface is: int filename__read_str(const char *filename, char **buf, size_t *sizep) Returns 0/-1 if the read suceeded/fail respectively. buf - place to store the data pointer size - place to store data size v2 change: - better error handling suggested by Namhyung Kim. Signed-off-by:
-
Jiri Olsa authored
Adding 'plugins' target along with the libtraceevent.a, so plugins are built together with traceevent library. Adding 'install-traceevent-plugins' Makefile install target, instructing perf to install plugins into: $(HOME)/.traceevent/plugins - If installed localy under $HOME $(DESTDIR)/$(prefix)/$(libdir)/traceevent/plugins - If installed globally Examples: $ make install ... $ find ~/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/plugin_mac80211.so /home/jolsa/.traceevent/plugins/plugin_kvm.so /home/jolsa/.traceevent/plugins/plugin_scsi.so /home/jolsa/.traceevent/plugins/plugin_sched_switch.so /home/jolsa/.traceevent/plugins/plugin_xen.so /home/jolsa/.traceevent/plugins/plugin_cfg80211.so /home/jolsa/.traceevent/plugins/plugin_function.so /home/jolsa/.traceevent/plugins/plugin_kmem.so /home/jolsa/.traceevent/plugins/plugin_hrtimer.so /home/jolsa/.traceevent/plugins/plugin_jbd2.so $ sudo make install DESTDIR=/opt/perf/ ... $ find /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/plugin_kvm.so /opt/perf/lib64/traceevent/plugins/plugin_scsi.so /opt/perf/lib64/traceevent/plugins/plugin_mac80211.so /opt/perf/lib64/traceevent/plugins/plugin_hrtimer.so /opt/perf/lib64/traceevent/plugins/plugin_kmem.so /opt/perf/lib64/traceevent/plugins/plugin_jbd2.so /opt/perf/lib64/traceevent/plugins/plugin_sched_switch.so /opt/perf/lib64/traceevent/plugins/plugin_function.so /opt/perf/lib64/traceevent/plugins/plugin_cfg80211.so /opt/perf/lib64/traceevent/plugins/plugin_xen.so Signed-off-by: -
Jiri Olsa authored
Removing the 'to ...' part out of the install message, because it does not fit to the rest of the build messages we use. Before: INSTALL plugin_hrtimer.so to /home/jolsa/libexec/perf-core/traceevent/plugins INSTALL plugin_jbd2.so to /home/jolsa/libexec/perf-core/traceevent/plugins INSTALL plugin_kmem.so to /home/jolsa/libexec/perf-core/traceevent/plugins INSTALL plugin_kvm.so to /home/jolsa/libexec/perf-core/traceevent/plugins INSTALL plugin_mac80211.so to /home/jolsa/libexec/perf-core/traceevent/plugins INSTALL plugin_sched_switch.so to /home/jolsa/libexec/perf-core/traceevent/plugins INSTALL plugin_function.so to /home/jolsa/libexec/perf-core/traceevent/plugins INSTALL plugin_xen.so to /home/jolsa/libexec/perf-core/traceevent/plugins INSTALL plugin_scsi.so to /home/jolsa/libexec/perf-core/traceevent/plugins Now: INSTALL plugin_jbd2.so INSTALL plugin_hrtimer.so INSTALL plugin_kmem.so INSTALL plugin_kvm.so INSTALL plugin_mac80211.so INSTALL plugin_sched_switch.so INSTALL plugin_function.so INSTALL plugin_xen.so INSTALL plugin_scsi.so Signed-off-by:
-
Jiri Olsa authored
Changing the pevent_parse_format interface to include the pevent handle. The goal is to always use pevent object when dealing with traceevent library. The reason is that we might need additional processing (like plugins), which is not possible otherwise. Patches follow to make this happen completely. Signed-off-by:
-
Jiri Olsa authored
Adding traceevent_host_bigendian function to get host endianity. It's used in following patches. Signed-off-by:
-
Jiri Olsa authored
Backporting missing pieces of plugin building infrastructure: - Adding Makefile 'plugins' target to build all defined plugins - Adding Makefile 'install_plugins' target as 'install_lib' target dependency - Link plugin objects with shared object building Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb): git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git Plugins are by default installed into following locations: '$(HOME)/.traceevent/plugins' - If we are installing under $(HOME) '$(prefix)/lib/traceevent/plugins' - Otherwise This path is propagated to the plugin object as a plugins search path. Signed-off-by: -
Jiri Olsa authored
Backporting plugin support for traceevent lib. Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb): git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git It's now possible to use following interface to load plugins (shared objects) to enhance pevent object functionality. The plugin interface/hooks are as follows: (taken from event-parse.h comments) - 'pevent_plugin_loader' (required) The function name to initialized the plugin. int pevent_plugin_loader(struct pevent *pevent) - 'pevent_plugin_unloader' (optional) The function called just before unloading int pevent_plugin_unloader(void) - 'pevent_plugin_options' (optional) Plugin options that can be set before loading struct plugin_option pevent_plugin_options[] = { { .name = "option-name", .plugin_alias = "overide-file-name", (optional) .description = "description of option to show users", }, { .name = NULL, }, }; Array must end with .name = NULL; The plugin_alias (below) can be used to give a shorter name to access the variable. Useful if a plugin handles more than one event. NOTE options support is not backported yet. - 'pevent_plugin_alias' (optional) The name to use for finding options (uses filename if not defined) New traceevent functions are added to search and load available plugins: struct plugin_list* traceevent_load_plugins(struct pevent *pevent) - loads plusing for 'struct pevent' object and returns loaded plugins list void traceevent_unload_plugins(struct plugin_list *plugin_list); - unload plugin list Signed-off-by:
-
Adrian Hunter authored
The perf_event__preprocess_sample() function is called in process_sample_event(). Instead of calling it again in perf_evsel__print_ip(), pass through the resultant addr_location. Signed-off-by:
-
Adrian Hunter authored
When built without libelf, perf tools was failing to initialize a file descriptor, but nevertheless closing it. That sometimes resulted in the output being truncated because the stdout file descriptor got closed. Signed-off-by:
-
Dongsheng Yang authored
As we have changed the default behavior of 'perf kvm' to --guest enabled, the parts of the man page that covers the 'record' subcommand are outdated. This patch updates it to show the correct output with --host/--guest/neither/both of them. Signed-off-by:
Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/3a3a9c1e05acb5a274d1d8369db5a4c6467d6276.1386197481.git.yangds.fnst@cn.fujitsu.comSigned-off-by:
-
Dongsheng Yang authored
As option --host and --guest request no input for it, there should not be a '=' after them in the man page sources. And --output expects a filename as the input, so there should be a '=' after it. This patch removes the needless '=' after --guest and --host, and adds a '=' after --output in perf-kvm.txt. Signed-off-by:
-
Dongsheng Yang authored
As the buildid is read from /sys/kernel/notes, then if we use perf kvm buildid-list with a perf data file captured by perf kvm record with --guestkallsyms and --guestmodules, there is no result in output. This patch add a explanation about it and add a limit of using perf kvm buildid-list. Signed-off-by:
-
Dongsheng Yang authored
Check for cpu_map__dummy_new() or cpu_map__new() to be called in perf_evlist__create_maps() is more complicated. This patch moves the checking work into target.h, combining two conditions and making perf_evlist__create_maps() more readable. Signed-off-by:
-
