- 17 Nov, 2016 1 commit
-
-
Greg Kroah-Hartman authored
We need DMA for this, otherwise the build breaks, so fix this up. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 16 Nov, 2016 7 commits
-
-
Arnd Bergmann authored
The raspberrypi-firmware driver may be built as a loadable module, which causes a link-time failure if the vc04_services driver is built-in during compile-testing: drivers/staging/vc04_services/vchiq.o: In function `vchiq_probe': vchiq_connected.c:(.text.vchiq_probe+0x2c): undefined reference to `rpi_firmware_get' drivers/staging/vc04_services/vchiq.o: In function `vchiq_platform_init': vchiq_connected.c:(.text.vchiq_platform_init+0x1f0): undefined reference to `rpi_firmware_property' This extends the dependency list to ensure the firmware is either reachable, or completely disabled in case of compile-testing. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
The driver tries to redefine mutex_lock_interruptible as an open-coded mutex_lock_killable, but that definition clashes with the normal mutex_lock_interruptible definition when CONFIG_DEBUG_LOCK_ALLOC is set: staging/vc04_services/interface/vchiq_arm/vchiq_killable.h:67:0: error: "mutex_lock_interruptible" redefined [-Werror] #define mutex_lock_interruptible mutex_lock_interruptible_killable include/linux/mutex.h:161:0: note: this is the location of the previous definition This simply removes the private implementation and uses the normal mutex_lock_killable directly. We could do the same for the down_interruptible_killable here, but it's better to just remove the semaphores entirely from the driver, which also takes care of that. Signed-off-by:
-
Arnd Bergmann authored
With gcc-7, I got a new warning for this driver: wilc1000/linux_wlan.c: In function 'wilc_netdev_cleanup': wilc1000/linux_wlan.c:1224:15: error: 'vif[1]' may be used uninitialized in this function [-Werror=maybe-uninitialized] wilc1000/linux_wlan.c:1224:15: error: 'vif[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized] A closer look at the function reveals that it's more complex than it needs to be, given that based on how the device is created we always get netdev_priv(vif->ndev) == vif Based on this assumption, I found a few other places in the same file that can be simplified. That code appears to be a relic from times when the assumption above was not valid. Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.10c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third set of IIO new device support, features and cleanup for the 4.10 cycle. Includes Peter Rosin's interesting drivers for a comparator. First complex use we have had with an analog front end made from discrete components. Brian Masney's work on moving the tsl2583 driver out of staging also feature extensively! New Drivers * DAC based on a digital potentiometer - New driver for the use of a dpot as a DAC. Includes bindings and Axentia entry in vendor prefixes. * Envelope detector baed on DAC and a comparator including device tree bindings. Staging Graduation * tsl2583. Core new features - Core provision for _available attributes. This one had been stalled for a long time until Peter picked it up and ran with it! - In kernel interface helpers to retrieve available info from channels. Driver new features * mcp4531 - Add range of available raw values (used for the dpot dac driver). Driver cleanups and fixes for issues introduced * ad7766 - Testing the wrong variable following devm_regulator_bulk_get introduced with the driver earlier in this cycle. * ad9832 - Fix a wrong ordering in the probe introduced in the previous set of patches. A use before allocation bug. * cros_ec_sensors - Testing for an error in a u8 will never work. * mpu3050 - Remove duplicate initializer for the module owner. - Add missing i2c dependency. - Inform the i2c mux core how it is used - step one in implifying device tree bindings. * st-sensors - Get rid of large number of uninformative defines in favour of putting the constants where they are relevant. It is clear what they are from where they are used. * tsl2583 - Fix unused function warning when CONFIG_PM disabled and remove the ifdefs in favour of __maybe_unused. - Refactor taos_chip_on to only read relevant registers. - Make sure calibscale and integration time are being set. - Verify chip is in ready to be used before calibration. - Remove some repeated checks for chip status (it's protected by a mutex so can't change until it's released) - Change current state storage from a tristate enum to a boolean seeing as only two values are actually used now. - Drop a redundant write to the control regiser in taos_probe (it's a noop) - Drop the FSF mailing address. - Clean up logging to not use hard coded function names (use __func__ instead). - Cleanup up variable and function name prefixes. - Alignment of #define fixes. - Fix comparison between signed and unsigned integer warnings. - Add some newlines in favour of readability. - Combine the two sysfs ABI docs that somehow ended up in different places. - Fix multiline comment syntax. - Move a code block to inside an else statement as it makes more sense there. - Change tsl2583_als_calibrate to return 0 rather than a value nothing reads. - Drop some pointless brackets - Don't assume 32bit unsigned int. - Change to a per device instance lux table. - Add missing tsl2583 to the list of supported devices in the intro comments. - Improve commment on clearing of interrupts. - Drop some uninformative comments. - Drop a memset call that doesn't do anything useful any more. - Don't initialize some return variables that are always set. - Add Brian Masney as a module author after all these changes.
-
Punit Vara authored
Replace uint8_t, uint16_t and uint32_t with preferred kernel types u8, u16 and u32 respectively suggested by checkpatch.pl Signed-off-by:
Punit Vara <punitvara@gmail.com> Signed-off-by:
-
Walt Feasel authored
Make suggested modification from checkpatch in reference to: CHECK: spaces preferred around that '+' Signed-off-by:
Walt Feasel <waltfeasel@gmail.com> Signed-off-by:
-
Walt Feasel authored
Make suggested modification from checkpatch in reference to: CHECK: Please use a blank line after function/struct/union/enum declarations Signed-off-by:
-
- 15 Nov, 2016 7 commits
-
-
Ian Abbott authored
In `ni_ai_insn_read()`, local variable `dl` is declared as `unsigned long`, but `unsigned int` will do. Get rid of it and use local variable `d` instead. (That used to be `unsigned short`, but has been `unsigned int` since kernel version 3.18.) Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
Commit 0557344e ("staging: comedi: ni_mio_common: fix local var for 32-bit read") changed the type of local variable `d` from `unsigned short` to `unsigned int` to fix a bug introduced in commit 9c340ac9 ("staging: comedi: ni_stc.h: add read/write callbacks to struct ni_private") when reading AI data for NI PCI-6110 and PCI-6111 cards. Unfortunately, other parts of the function rely on the variable being `unsigned short` when an offset value in local variable `signbits` is added to `d` before writing the value to the `data` array: d += signbits; data[n] = d; The `signbits` variable will be non-zero in bipolar mode, and is used to convert the hardware's 2's complement, 16-bit numbers to Comedi's straight binary sample format (with 0 representing the most negative voltage). This breaks because `d` is now 32 bits wide instead of 16 bits wide, so after the addition of `signbits`, `data[n]` ends up being set to values above 65536 for negative voltages. This affects all supported "E series" cards except PCI-6143 (and PXI-6143). Fix it by ANDing the value written to the `data[n]` with the mask 0xffff. Fixes: 0557344e ("staging: comedi: ni_mio_common: fix local var for 32-bit read") Signed-off-by:
-
Ian Abbott authored
For NI M Series cards, the Comedi `insn_read` handler for the AI subdevice is broken due to ANDing the value read from the AI FIFO data register with an incorrect mask. The incorrect mask clears all but the most significant bit of the sample data. It should preserve all the sample data bits. Correct it. Fixes: 817144ae ("staging: comedi: ni_mio_common: remove unnecessary use of 'board->adbits'") Signed-off-by:
-
Yamanappagouda Patil authored
Fixed checkpatch.pl "Missing a blank line after declarations" warnings. Signed-off-by:
Yamanappagouda Patil <goudapatilk@gmail.com> Signed-off-by:
-
Yamanappagouda Patil authored
Fixed checkpatch.pl warnings related to Block comments in staging/rtl8192e/*.c files. Signed-off-by:
-
Shiva Kerdel authored
After following a discussion about the used integer types Dan Carpenter pointed out that 'int' types should be used over the current change to 's16'. The reason for this is to have an upper bound instead of overflowing the 's16' so we could still remove devices. Signed-off-by:
Shiva Kerdel <shiva@exdev.nl> Suggested-by:
Stuart Yoder <stuart.yoder@nxp.com> Suggested-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Gregoire Pichon authored
This patch is the main client part of a new feature that supports multiple modify metadata RPCs in parallel. Its goal is to improve metadata operations performance of a single client, while maintening the consistency of MDT reply reconstruction and MDT recovery mechanisms. It allows to manage the number of modify RPCs in flight within the client obd structure and to assign a virtual index (the tag) to each modify RPC to help server side cleaning of reply data. The mdc component uses this feature to send multiple modify RPCs in parallel. Signed-off-by:
Gregoire Pichon <gregoire.pichon@bull.net> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5319 Reviewed-on: http://review.whamcloud.com/14374Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com> Reviewed-by:
Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by:
Oleg Drokin <oleg.drokin@intel.com> Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
-
- 14 Nov, 2016 25 commits
-
-
Henri Doreau authored
Implement non-blocking migration based on exclusive open instead of group lock. Implemented exclusive close operation to atomically put a lease, swap two layouts and close a file. This allows race-free migrations. Make the caller responsible for retrying on failure (EBUSY, EAGAIN) in non-blocking mode. In blocking mode, allow applications to trigger layout swaps using a grouplock they already own, to prevent race conditions between the actual data copy and the layout swap. Updated lfs accordingly. File leases are also taken in blocking mode, so that lfs migrate can issue a warning if an application attempts to open a file that is being migrated and gets blocked. Timestamps (atime/mtime) are set from userland, after the layout swap is performed, to prevent conflicts with the grouplock. lli_trunc_sem is taken/released in the vvp_io layer, under the DLM lock. This re-ordering fixes the original issue between truncate and migrate. Signed-off-by:
Henri Doreau <henri.doreau@cea.fr> Signed-off-by:
Jinshan Xiong <jinshan.xiong@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4840 Reviewed-on: http://review.whamcloud.com/10013Reviewed-by:
John L. Hammond <john.hammond@intel.com> Reviewed-by:
frank zago <fzago@cray.com> Reviewed-by:
-
Liang Zhen authored
In current lnet selftest, both client and server side bulk have no offset and we can only test page aligned IO, this patch changed this: - user can set brw offset by lst add_test ... brw off=OFFSET ... - offset is only effective on client side so far - to simply implementation, offset needs to be eight bytes aligned Signed-off-by:
Liang Zhen <liang.zhen@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5718 Reviewed-on: http://review.whamcloud.com/12496Reviewed-by:
Doug Oucharek <doug.s.oucharek@intel.com> Reviewed-by:
James Simmons <uja.ornl@yahoo.com> Reviewed-by:
-
wang di authored
Release lmv_init_mutex once the new target is added into lmv_tgt_desc, so lmv_obd_connect will not be serialized. New target should be allowed to added to fld client lists, so FLD can always choose new added target to do the FLD lookup request, and also remove some noise error messages in this process. Signed-off-by:
wang di <di.wang@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6713 Reviewed-on: http://review.whamcloud.com/15269Reviewed-by:
Niu Yawei <yawei.niu@intel.com> Reviewed-by:
-
Liang Zhen authored
ptlrpc is using rq_xid as matchbits of bulk data, which means it has to change rq_xid for bulk resend to avoid several bulk data landing into the same buffer from different resends. This patch uses one of reserved __u64 of ptlrpc_body to transfer mbits to peer, matchbits is now separated from xid. With this change, ptlrpc can keep rq_xid unchanged on resend, it only updates matchbits for bulk data. This protocol change is only applied if both sides of connection have OBD_CONNECT_BULK_MBITS, otherwise, ptlrpc still uses old approach and update xid while resending bulk. Signed-off-by:
-
John L. Hammond authored
obd_unpackmd() is only implemented by LMV so move it from OBD operations to OBD MD operations and update the prototype to reflex the actual usage. Remove the unused function obd_free_memmd(). Signed-off-by:
-
Jinshan Xiong authored
Implement cl_req_attr_set with a cl_object operation. Get rid of cl_req and related function and data structures. Signed-off-by:
Bobi Jam <bobijam@hotmail.com> Reviewed-by:
-
Aditya Pandit authored
If you create a file, archive and release it, it keeps only a link and all information in xattr. If you tar the file with --xattr you will store the same striping information and link information in the tar. If you delete the file, the file and archive state does not make sense. Now if you restore the file using tar with xattr having the RELEASED flag turned on, then it is not correct because this is a new file. Hence ignoring the HSM xattr and masking out the "RELEASED" flag for the files, which are not archived. Signed-off-by:
Aditya Pandit <panditadityashreesh@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6214 Reviewed-on: http://review.whamcloud.com/16060Reviewed-by:
-
wang di authored
If there are bad stripe during striped dir revalidation, most likely due the race between close(unlink) and getattr, then let's revalidate the dentry, instead of return error, like normal directory. Signed-off-by:
-
Andreas Dilger authored
Fix the alignment of fields in commonly-used structures to reduce memory usage on the client and server. Structures fixed: ptlrpc_reply_state: reduced by 8 bytes obd_device: reduced by 16 bytes niobuf_local: reduced by 8 bytes Signed-off-by:
Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by:
-
Henri Doreau authored
There used to be several pre-cleanup phases, but only OBD_CLEANUP_EXPORTS is actually used. Thus remove the whole notion of precleanup phases. Signed-off-by:
-
Ben Evans authored
Put IT_* definitions into an enum, as they're sent over the wire, adjust calls, print statements, etc. to use the new enum. Signed-off-by:
Ben Evans <bevans@cray.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6746 Reviewed-on: http://review.whamcloud.com/16228Reviewed-by:
-
Andreas Dilger authored
Improve the error messages related to DFID output and parsing for usage in userspace. Signed-off-by:
-
Oleg Drokin authored
osc_ast_guard has been removed by the clio simplification. Remove the last lock class definition. Signed-off-by:
-
Andreas Dilger authored
Remove unused file attribute flag LUSTRE_BFLAG_UNCOMMITTED_WRITES that was used internally on the client at one point. Add flags from the kernel which may be useful in the near future. Signed-off-by:
-
wang di authored
Do not lookup master inode by ilookup5, instead it should use ilookup5_nowait, otherwise it will cause dead lock, 1. Client1 send chmod req to the MDT0, then on MDT0, it enqueues master and all of its slaves lock, (mdt_attr_set() ->mdt_lock_slaves()), after gets master and stripe0 lock, it will send the enqueue request(for stripe1) to MDT1, then MDT1 finds the lock has been granted to client2. Then MDT1 sends blocking ast to client2. 2. At the same time, client2 tries to unlink the striped dir (rm -rf striped_dir), and during lookup, it will hold the master inode of the striped directory, whose inode state is NEW, then tries to revalidate all of its slaves, (ll_prep_inode()->ll_iget()->ll_read_inode2()-> ll_update_inode().). And it will be blocked on the server side because of 1. 3. Then the client get the blocking_ast request, cancel the lock, but being blocked by ilookup5 in ll_md_blocking_ast(), because the inode state is still NEW. Signed-off-by:
Lai Siyao <lai.siyao@intel.com> Reviewed-by:
-
Alexander Boyko authored
Fix: 5c689e68 ("staging/lustre/ptlrpc: race at req processing") decreased the race window, but does not remove it. Disable rq_resend right after MSG_REPLAY flag set. Import lock protects two threads from race between set/clear MSG_REPLAY and rq_resend flags. Signed-off-by:
Alexander Boyko <alexander_boyko@xyratex.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5554 Xyratex-bug-id: MRP-1888 Reviewed-on: http://review.whamcloud.com/10735Reviewed-by:
Mike Pershin <mike.pershin@intel.com> Reviewed-by:
-
Henri Doreau authored
Do not release nrs_lock in nrs_policy_stop0 to prevent op_policy_stop() from being executed concurrently. Signed-off-by:
Emoly Liu <emoly.liu@intel.com> Reviewed-by:
-
Jinshan Xiong authored
To avoid a race that osc_extent and osc_object destroy happens on the same time, which causes kernel crash. Signed-off-by:
Patrick Farrell <paf@cray.com> Reviewed-by:
-
wang di authored
If ll_iget fails during inode initialization, especially during striped directory lookup after creation failed, then it should clear stripe MD before make_bad_inode(), because make_bad_inode() will reset the i_mode, which can cause ll_clear_inode() skip freeing those stripe MD. Signed-off-by:
-
wang di authored
If clients or other targets can not get IR config lock or lock, the mount should continue, instead of failing. Because timeout mechanism will handle the recovery anyway. Signed-off-by:
-
John L. Hammond authored
In ldlm_expired_completion_wait() remove the useless LCONSOLE_WARN() message and upgrade the LDLM_DEBUG() statement to LDLM_ERROR(). Signed-off-by:
-
Hongchao Zhang authored
At client side, the replay cursor using to speed up the lookup of committed open requests in its obd_import should be resetted for normal connection (not reconnection) during recovery. Signed-off-by:
Hongchao Zhang <hongchao.zhang@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6802 Reviewed-on: http://review.whamcloud.com/17351Reviewed-by:
-
Hiroya Nozaki authored
Because of a implementation of generic_perform_write(), write(2) may return 0 with no errno even if EDQUOT or ENOSPC actually happened in it. This patch fixes the issue with setting a proper errno to ci_result. Signed-off-by:
Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6732 Reviewed-on: http://review.whamcloud.com/15302Reviewed-by:
-
Andreas Dilger authored
In some cases with a very long pathname, such as with sanity.sh test_154c, mdc_ioc_fid2path() would spew long debug messages to the log, because libcfs_debug_vmsg2() refuses to log messages over one page in size. Truncate the debug message to only log the last 512 characters of the pathname, which is sufficient for most debugging, saves a bit of space in the debug log, and will prevent the debug logging from printing to the console in the first place. Signed-off-by:
Jian Yu <jian.yu@intel.com> Reviewed-by:
-
John L. Hammond authored
The reference copytool cannot handle migration of HSM archive files. In the MDT migration path check for HSM attributes and fail if they are present. In the LMV layer allow creation of volatile files with any MDT index. Add a test to sanity-hsm to ensure that attempting to migrate an HSM archive file is handled safely. Signed-off-by:
-
