- 25 Feb, 2019 40 commits
-
-
Qu Wenruo authored
[BUG] Btrfs qgroup will still hit EDQUOT under the following case: $ dev=/dev/test/test $ mnt=/mnt/btrfs $ umount $mnt &> /dev/null $ umount $dev &> /dev/null $ mkfs.btrfs -f $dev $ mount $dev $mnt -o nospace_cache $ btrfs subv create $mnt/subv $ btrfs quota enable $mnt $ btrfs quota rescan -w $mnt $ btrfs qgroup limit -e 1G $mnt/subv $ fallocate -l 900M $mnt/subv/padding $ sync $ rm $mnt/subv/padding # Hit EDQUOT $ xfs_io -f -c "pwrite 0 512M" $mnt/subv/real_file [CAUSE] Since commit a514d638 ("btrfs: qgroup: Commit transaction in advance to reduce early EDQUOT"), btrfs is not forced to commit transaction to reclaim more quota space. Instead, we just check pertrans metadata reservation against some threshold and try to do asynchronously transaction commit. However in above case, the pertrans metadata reservation is pretty small thus it will never trigger asynchronous transaction commit. [FIX] Instead of only accounting pertrans metadata reservation, we calculate how much free space we have, and if there isn't much free space left, commit transaction asynchronously to try to free some space. This may slow down the fs when we have less than 32M free qgroup space, but should reduce a lot of false EDQUOT, so the cost should be acceptable. Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
btrfs: qgroup: Move reserved data accounting from btrfs_delayed_ref_head to btrfs_qgroup_extent_record [BUG] Btrfs/139 will fail with a high probability if the testing machine (VM) has only 2G RAM. Resulting the final write success while it should fail due to EDQUOT, and the fs will have quota exceeding the limit by 16K. The simplified reproducer will be: (needs a 2G ram VM) $ mkfs.btrfs -f $dev $ mount $dev $mnt $ btrfs subv create $mnt/subv $ btrfs quota enable $mnt $ btrfs quota rescan -w $mnt $ btrfs qgroup limit -e 1G $mnt/subv $ for i in $(seq -w 1 8); do xfs_io -f -c "pwrite 0 128M" $mnt/subv/file_$i > /dev/null echo "file $i written" > /dev/kmsg done $ sync $ btrfs qgroup show -pcre --raw $mnt The last pwrite will not trigger EDQUOT and final 'qgroup show' will show something like: qgroupid rfer excl max_rfer max_excl parent child -------- ---- ---- -------- -------- ------ ----- 0/5 16384 16384 none none --- --- 0/256 1073758208 1073758208 none 1073741824 --- --- And 1073758208 is larger than > 1073741824. [CAUSE] It's a bug in btrfs qgroup data reserved space management. For quota limit, we must ensure that: reserved (data + metadata) + rfer/excl <= limit Since rfer/excl is only updated at transaction commmit time, reserved space needs to be taken special care. One important part of reserved space is data, and for a new data extent written to disk, we still need to take the reserved space until rfer/excl numbers get updated. Originally when an ordered extent finishes, we migrate the reserved qgroup data space from extent_io tree to delayed ref head of the data extent, expecting delayed ref will only be cleaned up at commit transaction time. However for small RAM machine, due to memory pressure dirty pages can be flushed back to disk without committing a transaction. The related events will be something like: file 1 written btrfs_finish_ordered_io: ino=258 ordered offset=0 len=54947840 btrfs_finish_ordered_io: ino=258 ordered offset=54947840 len=5636096 btrfs_finish_ordered_io: ino=258 ordered offset=61153280 len=57344 btrfs_finish_ordered_io: ino=258 ordered offset=61210624 len=8192 btrfs_finish_ordered_io: ino=258 ordered offset=60583936 len=569344 cleanup_ref_head: num_bytes=54947840 cleanup_ref_head: num_bytes=5636096 cleanup_ref_head: num_bytes=569344 cleanup_ref_head: num_bytes=57344 cleanup_ref_head: num_bytes=8192 ^^^^^^^^^^^^^^^^ This will free qgroup data reserved space file 2 written ... file 8 written cleanup_ref_head: num_bytes=8192 ... btrfs_commit_transaction <<< the only transaction committed during the test When file 2 is written, we have already freed 128M reserved qgroup data space for ino 258. Thus later write won't trigger EDQUOT. This allows us to write more data beyond qgroup limit. In my 2G ram VM, it could reach about 1.2G before hitting EDQUOT. [FIX] By moving reserved qgroup data space from btrfs_delayed_ref_head to btrfs_qgroup_extent_record, we can ensure that reserved qgroup data space won't be freed half way before commit transaction, thus fix the problem. Fixes: f64d5ca8 ("btrfs: delayed_ref: Add new function to record reserved space into delayed ref") Signed-off-by: -
David Sterba authored
The member btrfs_fs_info::scrub_nocow_workers is unused since the nocow optimization was removed from scrub in 9bebe665 ("btrfs: scrub: Remove unused copy_nocow_pages and its callchain"). Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
David Sterba authored
The scrub worker pointers are not NULL iff the scrub is running, so reset them back once the last reference is dropped. Add assertions to the initial phase of scrub to verify that. Reviewed-by:
-
Anand Jain authored
Use the refcount_t for fs_info::scrub_workers_refcnt instead of int so we get the extra checks. All reference changes are still done under scrub_lock. Signed-off-by:
-
Anand Jain authored
scrub_workers_refcnt is protected by scrub_lock, add lockdep_assert_held() in scrub_workers_get(). Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Anand Jain authored
This fixes a longstanding lockdep warning triggered by fstests/btrfs/011. Circular locking dependency check reports warning[1], that's because the btrfs_scrub_dev() calls the stack #0 below with, the fs_info::scrub_lock held. The test case leading to this warning: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /btrfs $ btrfs scrub start -B /btrfs In fact we have fs_info::scrub_workers_refcnt to track if the init and destroy of the scrub workers are needed. So once we have incremented and decremented the fs_info::scrub_workers_refcnt value in the thread, its ok to drop the scrub_lock, and then actually do the btrfs_destroy_workqueue() part. So this patch drops the scrub_lock before calling btrfs_destroy_workqueue(). [359.258534] ====================================================== [359.260305] WARNING: possible circular locking dependency detected [359.261938] 5.0.0-rc6-default #461 Not tainted [359.263135] ------------------------------------------------------ [359.264672] btrfs/20975 is trying to acquire lock: [359.265927] 00000000d4d32bea ((wq_completion)"%s-%s""btrfs", name){+.+.}, at: flush_workqueue+0x87/0x540 [359.268416] [359.268416] but task is already holding lock: [359.270061] 0000000053ea26a6 (&fs_info->scrub_lock){+.+.}, at: btrfs_scrub_dev+0x322/0x590 [btrfs] [359.272418] [359.272418] which lock already depends on the new lock. [359.272418] [359.274692] [359.274692] the existing dependency chain (in reverse order) is: [359.276671] [359.276671] -> #3 (&fs_info->scrub_lock){+.+.}: [359.278187] __mutex_lock+0x86/0x9c0 [359.279086] btrfs_scrub_pause+0x31/0x100 [btrfs] [359.280421] btrfs_commit_transaction+0x1e4/0x9e0 [btrfs] [359.281931] close_ctree+0x30b/0x350 [btrfs] [359.283208] generic_shutdown_super+0x64/0x100 [359.284516] kill_anon_super+0x14/0x30 [359.285658] btrfs_kill_super+0x12/0xa0 [btrfs] [359.286964] deactivate_locked_super+0x29/0x60 [359.288242] cleanup_mnt+0x3b/0x70 [359.289310] task_work_run+0x98/0xc0 [359.290428] exit_to_usermode_loop+0x83/0x90 [359.291445] do_syscall_64+0x15b/0x180 [359.292598] entry_SYSCALL_64_after_hwframe+0x49/0xbe [359.294011] [359.294011] -> #2 (sb_internal#2){.+.+}: [359.295432] __sb_start_write+0x113/0x1d0 [359.296394] start_transaction+0x369/0x500 [btrfs] [359.297471] btrfs_finish_ordered_io+0x2aa/0x7c0 [btrfs] [359.298629] normal_work_helper+0xcd/0x530 [btrfs] [359.299698] process_one_work+0x246/0x610 [359.300898] worker_thread+0x3c/0x390 [359.302020] kthread+0x116/0x130 [359.303053] ret_from_fork+0x24/0x30 [359.304152] [359.304152] -> #1 ((work_completion)(&work->normal_work)){+.+.}: [359.306100] process_one_work+0x21f/0x610 [359.307302] worker_thread+0x3c/0x390 [359.308465] kthread+0x116/0x130 [359.309357] ret_from_fork+0x24/0x30 [359.310229] [359.310229] -> #0 ((wq_completion)"%s-%s""btrfs", name){+.+.}: [359.311812] lock_acquire+0x90/0x180 [359.312929] flush_workqueue+0xaa/0x540 [359.313845] drain_workqueue+0xa1/0x180 [359.314761] destroy_workqueue+0x17/0x240 [359.315754] btrfs_destroy_workqueue+0x57/0x200 [btrfs] [359.317245] scrub_workers_put+0x2c/0x60 [btrfs] [359.318585] btrfs_scrub_dev+0x336/0x590 [btrfs] [359.319944] btrfs_dev_replace_by_ioctl.cold.19+0x179/0x1bb [btrfs] [359.321622] btrfs_ioctl+0x28a4/0x2e40 [btrfs] [359.322908] do_vfs_ioctl+0xa2/0x6d0 [359.324021] ksys_ioctl+0x3a/0x70 [359.325066] __x64_sys_ioctl+0x16/0x20 [359.326236] do_syscall_64+0x54/0x180 [359.327379] entry_SYSCALL_64_after_hwframe+0x49/0xbe [359.328772] [359.328772] other info that might help us debug this: [359.328772] [359.330990] Chain exists of: [359.330990] (wq_completion)"%s-%s""btrfs", name --> sb_internal#2 --> &fs_info->scrub_lock [359.330990] [359.334376] Possible unsafe locking scenario: [359.334376] [359.336020] CPU0 CPU1 [359.337070] ---- ---- [359.337821] lock(&fs_info->scrub_lock); [359.338506] lock(sb_internal#2); [359.339506] lock(&fs_info->scrub_lock); [359.341461] lock((wq_completion)"%s-%s""btrfs", name); [359.342437] [359.342437] *** DEADLOCK *** [359.342437] [359.343745] 1 lock held by btrfs/20975: [359.344788] #0: 0000000053ea26a6 (&fs_info->scrub_lock){+.+.}, at: btrfs_scrub_dev+0x322/0x590 [btrfs] [359.346778] [359.346778] stack backtrace: [359.347897] CPU: 0 PID: 20975 Comm: btrfs Not tainted 5.0.0-rc6-default #461 [359.348983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [359.350501] Call Trace: [359.350931] dump_stack+0x67/0x90 [359.351676] print_circular_bug.isra.37.cold.56+0x15c/0x195 [359.353569] check_prev_add.constprop.44+0x4f9/0x750 [359.354849] ? check_prev_add.constprop.44+0x286/0x750 [359.356505] __lock_acquire+0xb84/0xf10 [359.357505] lock_acquire+0x90/0x180 [359.358271] ? flush_workqueue+0x87/0x540 [359.359098] flush_workqueue+0xaa/0x540 [359.359912] ? flush_workqueue+0x87/0x540 [359.360740] ? drain_workqueue+0x1e/0x180 [359.361565] ? drain_workqueue+0xa1/0x180 [359.362391] drain_workqueue+0xa1/0x180 [359.363193] destroy_workqueue+0x17/0x240 [359.364539] btrfs_destroy_workqueue+0x57/0x200 [btrfs] [359.365673] scrub_workers_put+0x2c/0x60 [btrfs] [359.366618] btrfs_scrub_dev+0x336/0x590 [btrfs] [359.367594] ? start_transaction+0xa1/0x500 [btrfs] [359.368679] btrfs_dev_replace_by_ioctl.cold.19+0x179/0x1bb [btrfs] [359.369545] btrfs_ioctl+0x28a4/0x2e40 [btrfs] [359.370186] ? __lock_acquire+0x263/0xf10 [359.370777] ? kvm_clock_read+0x14/0x30 [359.371392] ? kvm_sched_clock_read+0x5/0x10 [359.372248] ? sched_clock+0x5/0x10 [359.372786] ? sched_clock_cpu+0xc/0xc0 [359.373662] ? do_vfs_ioctl+0xa2/0x6d0 [359.374552] do_vfs_ioctl+0xa2/0x6d0 [359.375378] ? do_sigaction+0xff/0x250 [359.376233] ksys_ioctl+0x3a/0x70 [359.376954] __x64_sys_ioctl+0x16/0x20 [359.377772] do_syscall_64+0x54/0x180 [359.378841] entry_SYSCALL_64_after_hwframe+0x49/0xbe [359.380422] RIP: 0033:0x7f5429296a97 Backporting to older kernels: scrub_nocow_workers must be freed the same way as the others. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: -
Anand Jain authored
We have killed volume mutex (commit: dccdb07b btrfs: kill btrfs_fs_info::volume_mutex). This a trival one seems to have escaped. Signed-off-by:
-
Qu Wenruo authored
There is no need to forward declare flush_write_bio(), as it only depends on submit_one_bio(). Both of them are pretty small, just move them to kill the forward declaration. Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Nikolay Borisov authored
The variables and function parameters of __etree_search which pertain to prev/next are grossly misnamed. Namely, prev_ret holds the next state and not the previous. Similarly, next_ret actually holds the previous extent state relating to the offset we are interested in. Fix this by renaming the variables as well as switching the arguments order. No functional changes. Signed-off-by:
-
Nikolay Borisov authored
With the refactoring introduced in 8b62f87b ("Btrfs: reworki outstanding_extents") this flag became unused. Remove it and renumber the following flags accordingly. No functional changes. Reviewed-by:
-
Nikolay Borisov authored
There is no point in using a construct like 'if (!condition) WARN_ON(1)'. Use WARN_ON(!condition) directly. No functional changes. Reviewed-by:
-
Josef Bacik authored
We could generate a lot of delayed refs in evict but never have any left over space from our block rsv to make up for that fact. So reserve some extra space and give it to the transaction so it can be used to refill the delayed refs rsv every loop through the truncate path. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Josef Bacik authored
For FLUSH_LIMIT flushers we really can only allocate chunks and flush delayed inode items, everything else is problematic. I added a bunch of new states and it lead to weirdness in the FLUSH_LIMIT case because I forgot about how it worked. So instead explicitly declare the states that are ok for flushing with FLUSH_LIMIT and use that for our state machine. Then as we add new things that are safe we can just add them to this list. Reviewed-by:
-
Josef Bacik authored
With severe fragmentation we can end up with our inode rsv size being huge during writeout, which would cause us to need to make very large metadata reservations. However we may not actually need that much once writeout is complete, because of the over-reservation for the worst case. So instead try to make our reservation, and if we couldn't make it re-calculate our new reservation size and try again. If our reservation size doesn't change between tries then we know we are actually out of space and can error. Flushing that could have been running in parallel did not make any space. Signed-off-by:
-
Josef Bacik authored
With the introduction of the per-inode block_rsv it became possible to have really really large reservation requests made because of data fragmentation. Since the ticket stuff assumed that we'd always have relatively small reservation requests it just killed all tickets if we were unable to satisfy the current request. However, this is generally not the case anymore. So fix this logic to instead see if we had a ticket that we were able to give some reservation to, and if we were continue the flushing loop again. Likewise we make the tickets use the space_info_add_old_bytes() method of returning what reservation they did receive in hopes that it could satisfy reservations down the line. Reviewed-by:
-
Josef Bacik authored
We've done this forever because of the voodoo around knowing how much space we have. However, we have better ways of doing this now, and on normal file systems we'll easily have a global reserve of 512MiB, and since metadata chunks are usually 1GiB that means we'll allocate metadata chunks more readily. Instead use the actual used amount when determining if we need to allocate a chunk or not. This has a side effect for mixed block group fs'es where we are no longer allocating enough chunks for the data/metadata requirements. To deal with this add a ALLOC_CHUNK_FORCE step to the flushing state machine. This will only get used if we've already made a full loop through the flushing machinery and tried committing the transaction. If we have then we can try and force a chunk allocation since we likely need it to make progress. This resolves issues I was seeing with the mixed bg tests in xfstests without the new flushing state. Reviewed-by:
-
Josef Bacik authored
For enospc_debug having the block rsvs is super helpful to see if we've done something wrong. Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Josef Bacik authored
may_commit_transaction will skip committing the transaction if we don't have enough pinned space or if we're trying to find space for a SYSTEM chunk. However, if we have pending free block groups in this transaction we still want to commit as we may be able to allocate a chunk to make our reservation. So instead of just returning ENOSPC, check if we have free block groups pending, and if so commit the transaction to allow us to use that free space. Reviewed-by:
-
Dennis Zhou authored
Zstd compression requires different amounts of memory for each level of compression. The prior patches implemented indirection to allow for each compression type to manage their workspaces independently. This patch uses this indirection to implement compression level support for zstd. To manage the additional memory require, each compression level has its own queue of workspaces. A global LRU is used to help with reclaim. Reclaim is done via a timer which provides a mechanism to decrease memory utilization by keeping only workspaces around that are sized appropriately. Forward progress is guaranteed by a preallocated max workspace hidden from the LRU. When getting a workspace, it uses a bitmap to identify the levels that are populated and scans up. If it finds a workspace that is greater than it, it uses it, but does not update the last_used time and the corresponding place in the LRU. If we hit memory pressure, we sleep on the max level workspace. We continue to rescan in case we can use a smaller workspace, but eventually should be able to obtain the max level workspace or allocate one again should memory pressure subside. The memory requirement for decompression is the same as level 1, and therefore can use any of available workspace. The number of workspaces is bound by an upper limit of the workqueue's limit which currently is 2 (percpu limit). The reclaim timer is used to free inactive/improperly sized workspaces and is set to 307s to avoid colliding with transaction commit (every 30s). Repeating the experiment from v2 [1], the Silesia corpus was copied to a btrfs filesystem 10 times and then read back after dropping the caches. The btrfs filesystem was on an SSD. Level Ratio Compression (MB/s) Decompression (MB/s) Memory (KB) 1 2.658 438.47 910.51 780 2 2.744 364.86 886.55 1004 3 2.801 336.33 828.41 1260 4 2.858 286.71 886.55 1260 5 2.916 212.77 556.84 1388 6 2.363 119.82 990.85 1516 7 3.000 154.06 849.30 1516 8 3.011 159.54 875.03 1772 9 3.025 100.51 940.15 1772 10 3.033 118.97 616.26 1772 11 3.036 94.19 802.11 1772 12 3.037 73.45 931.49 1772 13 3.041 55.17 835.26 2284 14 3.087 44.70 716.78 2547 15 3.126 37.30 878.84 2547 [1] https://lore.kernel.org/linux-btrfs/20181031181108.289340-1-terrelln@fb.com/ Cc: Nick Terrell <terrelln@fb.com> Cc: Omar Sandoval <osandov@osandov.com> Signed-off-by:
Dennis Zhou <dennis@kernel.org> Reviewed-by:
-
Dennis Zhou authored
It is possible based on the level configurations that a higher level workspace uses less memory than a lower level workspace. In order to reuse workspaces, this must be made a monotonic relationship. This precomputes the required memory for each level and enforces the monotonicity between level and memory required. This is also done in upstream zstd in [1]. [1] https://github.com/facebook/zstd/commit/a68b76afefec6876f8e8a538155109a5aeac0143 Cc: Nick Terrell <terrelln@fb.com> Signed-off-by:
-
Dennis Zhou authored
Zstd currently only supports the default level of compression. This patch switches to using the level passed in for btrfs zstd configuration. Zstd workspaces now keep track of the requested level as this can differ from the size of the workspace. Reviewed-by:
-
Dennis Zhou authored
Currently, the only user of set_level() is zlib which sets an internal workspace parameter. As level is now plumbed into get_workspace(), this can be handled there rather than separately. This repurposes set_level() to bound the level passed in so it can be used when setting the mounts compression level and as well as verifying the level before getting a workspace. The other benefit is this divides the meaning of compress(0) and get_workspace(0). The former means we want to use the default compression level of the compression type. The latter means we can use any workspace available. Signed-off-by:
-
Dennis Zhou authored
Zlib compression supports multiple levels, but doesn't require changing in how a workspace itself is created and managed. Zstd introduces a different memory requirement such that higher levels of compression require more memory. This requires changes in how the alloc()/get() methods work for zstd. This pach plumbs compression level through the interface as a parameter in preparation for zstd compression levels. This gives the compression types opportunity to create/manage based on the compression level. Reviewed-by:
-
Dennis Zhou authored
The previous patch added generic helpers for get_workspace() and put_workspace(). Now, we can migrate ownership of the workspace_manager to be in the compression type code as the compression code itself doesn't care beyond being able to get a workspace. The init/cleanup and get/put methods are abstracted so each compression algorithm can decide how they want to manage their workspaces. Reviewed-by:
-
Dennis Zhou authored
There are two levels of workspace management. First, alloc()/free() which are responsible for actually creating and destroy workspaces. Second, at a higher level, get()/put() which is the compression code asking for a workspace from a workspace_manager. The compression code shouldn't really care how it gets a workspace, but that it got a workspace. This adds get_workspace() and put_workspace() to be the higher level interface which is responsible for indexing into the appropriate compression type. It also introduces btrfs_put_workspace() and btrfs_get_workspace() to be the generic implementations of the higher interface. Reviewed-by:
-
Dennis Zhou authored
Workspace manager init and cleanup code is open coded inside a for loop over the compression types. This forces each compression type to rely on the same workspace manager implementation. This patch creates helper methods that will be the generic implementation for btrfs workspace management. Reviewed-by:
-
Dennis Zhou authored
Make the workspace_manager own the interface operations rather than managing index-paired arrays for the workspace_manager and compression operations. Reviewed-by:
-
Dennis Zhou authored
While the heuristic workspaces aren't really compression workspaces, they use the same interface for managing them. So rather than branching, let's just handle them once again as the index 0 compression type. Reviewed-by:
-
Dennis Zhou authored
This is in preparation for zstd compression levels. As each level will require different size of workspace, workspaces_list is no longer a really fitting name. Reviewed-by:
-
Dennis Zhou authored
It is very easy to miss places that rely on a certain bitshifting for decoding the type_level overloading. Add helpers to do this instead. Cc: Omar Sandoval <osandov@osandov.com> Reviewed-by:
-
Anand Jain authored
Support for a new command that can be used eg. as a command $ btrfs device scan --forget [dev]' (the final name may change though) to undo the effects of 'btrfs device scan [dev]'. For this purpose this patch proposes to use ioctl #5 as it was empty and is next to the SCAN ioctl. The new ioctl BTRFS_IOC_FORGET_DEV works only on the control device (/dev/btrfs-control) to unregister one or all devices, devices that are not mounted. The argument is struct btrfs_ioctl_vol_args, ::name specifies the device path. To unregister all device, the path is an empty string. Again, the devices are removed only if they aren't part of a mounte filesystem. This new ioctl provides: - release of unwanted btrfs_fs_devices and btrfs_devices structures from memory if the device is not going to be mounted - ability to mount filesystem in degraded mode, when one devices is corrupted like in split brain raid1 - running test cases which would require reloading the kernel module but this is not possible eg. due to mounted filesystem or built-in Signed-off-by:
-
Josef Bacik authored
The throttle path doesn't take cleaner_delayed_iput_mutex, which means we could think we're done flushing iputs in the data space reservation path when we could have a throttler doing an iput. There's no real reason to serialize the delayed iput flushing, so instead of taking the cleaner_delayed_iput_mutex whenever we flush the delayed iputs just replace it with an atomic counter and a waitqueue. This removes the short (or long depending on how big the inode is) window where we think there are no more pending iputs when there really are some. The waiting is killable as it could be indirectly called from user operations like fallocate or zero-range. Such call sites should handle the error but otherwise it's not necessary. Eg. flush_space just needs to attempt to make space by waiting on iputs. Signed-off-by:
-
Qu Wenruo authored
Since inc_block_group_ro() would return -ENOSPC, outputting debug info for enospc_debug mount option would be helpful to debug some balance false ENOSPC report. Signed-off-by:
-
Qu Wenruo authored
Inside qgroup_rsv_add/release(), we have trace events trace_qgroup_update_reserve() to catch reserved space update. However we still have two manual trace_qgroup_update_reserve() calls just outside these functions. Remove these duplicated calls. Fixes: 64ee4e75 ("btrfs: qgroup: Update trace events to use new separate rsv types") Reviewed-by:
-
Anders Roxell authored
A compiler warning (in a patch in development) pointed to a variable that was used only inside and ASSERT: u64 root_objectid = root->root_key.objectid; ASSERT(root_objectid == ...); fs/btrfs/relocation.c: In function ‘insert_dirty_subv’: fs/btrfs/relocation.c:2138:6: warning: unused variable ‘root_objectid’ [-Wunused-variable] u64 root_objectid = root->root_key.objectid; ^~~~~~~~~~~~~ When CONFIG_BRTFS_ASSERT isn't enabled, variable root_objectid isn't used. Rework the assertion helper by adding a runtime check instead of the '#ifdef CONFIG_BTRFS_ASSERT #else ...", so the compiler sees the condition being passed into an inline function after preprocessing. Signed-off-by:Anders Roxell <anders.roxell@linaro.org> Reviewed-by:
-
David Sterba authored
The last caller that does not have a fixed value of lock is btrfs_set_path_blocking, that actually does the same conditional swtich by the lock type so we can merge the branches together and remove the helper. Reviewed-by:
-
David Sterba authored
Currently, the number of readers and writers is checked and in case there are any, wait and redo the locks. There's some duplication before the branches go back to again label, eg. calling wait_event on blocking_readers twice. The sequence is transformed loop: * wait for readers * wait for writers * write_lock * check readers, unlock and wait for readers, loop * check writers, unlock and wait for writers, loop The new sequence is not exactly the same due to the simplification, for readers it's slightly faster. For the writers, original code does * wait for writers * (loop) wait for readers * wait for writers -- again while the new goes directly to the reader check. This should behave the same on a contended lock with multiple writers and readers, but can reduce number of times we're waiting on something. Reviewed-by:
-
David Sterba authored
btrfs_set_lock_blocking is now only a simple wrapper around btrfs_set_lock_blocking_write. The name does not bring any semantic value that could not be inferred from the new function so there's no point keeping it. Reviewed-by:
-
David Sterba authored
We can use the right helper where the lock type is a fixed parameter. Reviewed-by:
-
