- 27 May, 2021 2 commits
-
-
David Howells authored
Fix rename of one directory over another such that the nlink on the deleted directory is cleared to 0 rather than being decremented to 1. This was causing the generic/035 xfstest to fail. Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/162194384460.3999479.7605572278074191079.stgit@warthog.procyon.org.uk/ # v1 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc4, including fixes from bpf, netfilter, can and wireless trees. Notably including fixes for the recently announced "FragAttacks" WiFi vulnerabilities. Rather large batch, touching some core parts of the stack, too, but nothing hair-raising. Current release - regressions: - tipc: make node link identity publish thread safe - dsa: felix: re-enable TAS guard band mode - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid() - stmmac: fix system hang if change mac address after interface ifdown Current release - new code bugs: - mptcp: avoid OOB access in setsockopt() - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers - ethtool: stats: fix a copy-paste error - init correct array size Previous releases - regressions: - sched: fix packet stuck problem for lockless qdisc - net: really orphan skbs tied to closing sk - mlx4: fix EEPROM dump support - bpf: fix alu32 const subreg bound tracking on bitwise operations - bpf: fix mask direction swap upon off reg sign change - bpf, offload: reorder offload callback 'prepare' in verifier - stmmac: Fix MAC WoL not working if PHY does not support WoL - packetmmap: fix only tx timestamp on request - tipc: skb_linearize the head skb when reassembling msgs Previous releases - always broken: - mac80211: address recent "FragAttacks" vulnerabilities - mac80211: do not accept/forward invalid EAPOL frames - mptcp: avoid potential error message floods - bpf, ringbuf: deny reserve of buffers larger than ringbuf to prevent out of buffer writes - bpf: forbid trampoline attach for functions with variable arguments - bpf: add deny list of functions to prevent inf recursion of tracing programs - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT - can: isotp: prevent race between isotp_bind() and isotp_setsockopt() - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Misc: - bpf: add kconfig knob for disabling unpriv bpf by default" * tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits) net: phy: Document phydev::dev_flags bits allocation mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer mptcp: avoid error message on infinite mapping mptcp: drop unconditional pr_warn on bad opt mptcp: avoid OOB access in setsockopt() nfp: update maintainer and mailing list addresses net: mvpp2: add buffer header handling in RX bnx2x: Fix missing error code in bnx2x_iov_init_one() net: zero-initialize tc skb extension on allocation net: hns: Fix kernel-doc sctp: fix the proc_handler for sysctl encap_port sctp: add the missing setting for asoc encap_port bpf, selftests: Adjust few selftest result_unpriv outcomes bpf: No need to simulate speculative domain for immediates bpf: Fix mask direction swap upon off reg sign change bpf: Wrap aux data inside bpf_sanitize_info container bpf: Fix BPF_LSM kconfig symbol dependency selftests/bpf: Add test for l3 use of bpf_redirect_peer bpftool: Add sock_release help info for cgroup attach/prog load command net: dsa: microchip: enable phy errata workaround on 9567 ...
-
- 26 May, 2021 2 commits
-
-
Florian Fainelli authored
Document the phydev::dev_flags bit allocation to allow bits 15:0 to define PHY driver specific behavior, bits 23:16 to be reserved for now, and bits 31:24 to hold generic PHY driver flags. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20210526184617.3105012-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD fixes from Miquel Raynal: "MTD parsers: - Fix ofpart subpartitions parsing Raw NAND: - Fix external use of SW Hamming ECC helper (txx9ndfmc, tmio, sharpsl, ndfc, lpc32xx_slc, fsmc, cs553x)" * tag 'mtd/fixes-for-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: parsers: ofpart: fix parsing subpartitions mtd: rawnand: txx9ndfmc: Fix external use of SW Hamming ECC helper mtd: rawnand: tmio: Fix external use of SW Hamming ECC helper mtd: rawnand: sharpsl: Fix external use of SW Hamming ECC helper mtd: rawnand: ndfc: Fix external use of SW Hamming ECC helper mtd: rawnand: lpc32xx_slc: Fix external use of SW Hamming ECC helper mtd: rawnand: fsmc: Fix external use of SW Hamming ECC helper mtd: rawnand: cs553x: Fix external use of SW Hamming ECC helper
-
- 25 May, 2021 26 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-05-26 The following pull-request contains BPF updates for your *net* tree. We've added 14 non-merge commits during the last 14 day(s) which contain a total of 17 files changed, 513 insertions(+), 231 deletions(-). The main changes are: 1) Fix bpf_skb_change_head() helper to reset mac_len, from Jussi Maki. 2) Fix masking direction swap upon off-reg sign change, from Daniel Borkmann. 3) Fix BPF offloads in verifier by reordering driver callback, from Yinjun Zhang. 4) BPF selftest for ringbuf mmap ro/rw restrictions, from Andrii Nakryiko. 5) Follow-up fixes to nested bprintf per-cpu buffers, from Florent Revest. 6) Fix bpftool sock_release attach point help info, from Liu Jian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Mat Martineau says: ==================== MPTCP fixes Here are a few fixes for the -net tree. Patch 1 fixes an attempt to access a tcp-specific field that does not exist in mptcp sockets. Patches 2 and 3 remove warning/error log output that could be flooded. Patch 4 performs more validation on address advertisement echo packets to improve RFC 8684 compliance. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
when Linux receives an echo-ed ADD_ADDR, it checks the IP address against the list of "announced" addresses. In case of a positive match, the timer that handles retransmissions is stopped regardless of the 'Address Id' in the received packet: this behaviour does not comply with RFC8684 3.4.1. Fix it by validating the 'Address Id' in received echo-ed ADD_ADDRs. Tested using packetdrill, with the following captured output: unpatched kernel: Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 3013740213], length 0 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 3013740213], length 0 ^^^ retransmission is stopped here, but 'Address Id' is 90 patched kernel: Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 1672384568], length 0 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 1672384568], length 0 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 198.51.100.2,mptcp dss ack 1672384568], length 0 ^^^ retransmission is stopped here, only when both 'Address Id' and 'IP Address' match Fixes: 00cfd77b ("mptcp: retransmit ADD_ADDR when timeout") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Another left-over. Avoid flooding dmesg with useless text, we already have a MIB for that event. Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
This is a left-over of early day. A malicious peer can flood the kernel logs with useless messages, just drop it. Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
We can't use tcp_set_congestion_control() on an mptcp socket, as such function can end-up accessing a tcp-specific field - prior_ssthresh - causing an OOB access. To allow propagating the correct ca algo on subflow, cache the ca name at initialization time. Additionally avoid overriding the user-selected CA (if any) at clone time. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/182 Fixes: aa1fbd94 ("mptcp: sockopt: add TCP_CONGESTION and TCP_INFO") Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Horman authored
Some of Netronome's activities and people have moved over to Corigine, including NFP driver maintenance and myself. Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Chulski authored
If Link Partner sends frames larger than RX buffer size, MAC mark it as oversize but still would pass it to the Packet Processor. In this scenario, Packet Processor scatter frame between multiple buffers, but only a single buffer would be returned to the Buffer Manager pool and it would not refill the poll. Patch add handling of oversize error with buffer header handling, so all buffers would be returned to the Buffer Manager pool. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiapeng Chong authored
Eliminate the follow smatch warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227 bnx2x_iov_init_one() warn: missing error code 'err'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
Function skb_ext_add() doesn't initialize created skb extension with any value and leaves it up to the user. However, since extension of type TC_SKB_EXT originally contained only single value tc_skb_ext->chain its users used to just assign the chain value without setting whole extension memory to zero first. This assumption changed when TC_SKB_EXT extension was extended with additional fields but not all users were updated to initialize the new fields which leads to use of uninitialized memory afterwards. UBSAN log: [ 778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28 [ 778.301495] load of value 107 is not a valid value for type '_Bool' [ 778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2 [ 778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 778.307901] Call Trace: [ 778.308680] <IRQ> [ 778.309358] dump_stack+0xbb/0x107 [ 778.310307] ubsan_epilogue+0x5/0x40 [ 778.311167] __ubsan_handle_load_invalid_value.cold+0x43/0x48 [ 778.312454] ? memset+0x20/0x40 [ 778.313230] ovs_flow_key_extract.cold+0xf/0x14 [openvswitch] [ 778.314532] ovs_vport_receive+0x19e/0x2e0 [openvswitch] [ 778.315749] ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch] [ 778.317188] ? create_prof_cpu_mask+0x20/0x20 [ 778.318220] ? arch_stack_walk+0x82/0xf0 [ 778.319153] ? secondary_startup_64_no_verify+0xb0/0xbb [ 778.320399] ? stack_trace_save+0x91/0xc0 [ 778.321362] ? stack_trace_consume_entry+0x160/0x160 [ 778.322517] ? lock_release+0x52e/0x760 [ 778.323444] netdev_frame_hook+0x323/0x610 [openvswitch] [ 778.324668] ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch] [ 778.325950] __netif_receive_skb_core+0x771/0x2db0 [ 778.327067] ? lock_downgrade+0x6e0/0x6f0 [ 778.328021] ? lock_acquire+0x565/0x720 [ 778.328940] ? generic_xdp_tx+0x4f0/0x4f0 [ 778.329902] ? inet_gro_receive+0x2a7/0x10a0 [ 778.330914] ? lock_downgrade+0x6f0/0x6f0 [ 778.331867] ? udp4_gro_receive+0x4c4/0x13e0 [ 778.332876] ? lock_release+0x52e/0x760 [ 778.333808] ? dev_gro_receive+0xcc8/0x2380 [ 778.334810] ? lock_downgrade+0x6f0/0x6f0 [ 778.335769] __netif_receive_skb_list_core+0x295/0x820 [ 778.336955] ? process_backlog+0x780/0x780 [ 778.337941] ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core] [ 778.339613] ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0 [ 778.341033] ? kvm_clock_get_cycles+0x14/0x20 [ 778.342072] netif_receive_skb_list_internal+0x5f5/0xcb0 [ 778.343288] ? __kasan_kmalloc+0x7a/0x90 [ 778.344234] ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core] [ 778.345676] ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core] [ 778.347140] ? __netif_receive_skb_list_core+0x820/0x820 [ 778.348351] ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core] [ 778.349688] ? napi_gro_flush+0x26c/0x3c0 [ 778.350641] napi_complete_done+0x188/0x6b0 [ 778.351627] mlx5e_napi_poll+0x373/0x1b80 [mlx5_core] [ 778.352853] __napi_poll+0x9f/0x510 [ 778.353704] ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core] [ 778.355158] net_rx_action+0x34c/0xa40 [ 778.356060] ? napi_threaded_poll+0x3d0/0x3d0 [ 778.357083] ? sched_clock_cpu+0x18/0x190 [ 778.358041] ? __common_interrupt+0x8e/0x1a0 [ 778.359045] __do_softirq+0x1ce/0x984 [ 778.359938] __irq_exit_rcu+0x137/0x1d0 [ 778.360865] irq_exit_rcu+0xa/0x20 [ 778.361708] common_interrupt+0x80/0xa0 [ 778.362640] </IRQ> [ 778.363212] asm_common_interrupt+0x1e/0x40 [ 778.364204] RIP: 0010:native_safe_halt+0xe/0x10 [ 778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00 [ 778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246 [ 778.370570] RAX: ffff88842de46a80 RBX: ffffffff84425840 RCX: ffffffff83418468 [ 778.372143] RDX: 000000000026f1da RSI: 0000000000000004 RDI: ffffffff8343af5e [ 778.373722] RBP: fffffbfff0884b08 R08: 0000000000000000 R09: ffff88842de46bcb [ 778.375292] R10: ffffed1085bc8d79 R11: 0000000000000001 R12: 0000000000000000 [ 778.376860] R13: ffffffff851124a0 R14: 0000000000000000 R15: dffffc0000000000 [ 778.378491] ? rcu_eqs_enter.constprop.0+0xb8/0xe0 [ 778.379606] ? default_idle_call+0x5e/0xe0 [ 778.380578] default_idle+0xa/0x10 [ 778.381406] default_idle_call+0x96/0xe0 [ 778.382350] do_idle+0x3d4/0x550 [ 778.383153] ? arch_cpu_idle_exit+0x40/0x40 [ 778.384143] cpu_startup_entry+0x19/0x20 [ 778.385078] start_kernel+0x3c7/0x3e5 [ 778.385978] secondary_startup_64_no_verify+0xb0/0xbb Fix the issue by providing new function tc_skb_ext_alloc() that allocates tc skb extension and initializes its memory to 0 before returning it to the caller. Change all existing users to use new API instead of calling skb_ext_add() directly. Fixes: 038ebb1a ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct") Fixes: d29334c1 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Acked-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Li authored
Fix function name in hns_ethtool.c kernel-doc comment to remove these warnings found by clang_w1. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:202: warning: expecting prototype for hns_nic_set_link_settings(). Prototype was for hns_nic_set_link_ksettings() instead. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:837: warning: expecting prototype for get_ethtool_stats(). Prototype was for hns_get_ethtool_stats() instead. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:894: warning: expecting prototype for get_strings(). Prototype was for hns_get_strings() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 'commit 262b38cd ("net: ethernet: hisilicon: hns: use phydev from struct net_device")' Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
proc_dointvec() cannot do min and max check for setting a value when extra1/extra2 is set, so change it to proc_dointvec_minmax() for sysctl encap_port. Fixes: e8a3001c ("sctp: add encap_port for netns sock asoc and transport") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
This patch is to add the missing setting back for asoc encap_port. Fixes: 8dba2960 ("sctp: add SCTP_REMOTE_UDP_ENCAPS_PORT sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kees Cook authored
Fix another "confused deputy" weakness[1]. Writes to /proc/$pid/attr/ files need to check the opener credentials, since these fds do not transition state across execve(). Without this, it is possible to trick another process (which may have different credentials) to write to its own /proc/$pid/attr/ files, leading to unexpected and possibly exploitable behaviors. [1] https://www.kernel.org/doc/html/latest/security/credentials.html?highlight=confused#open-file-credentials Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Borkmann authored
Given we don't need to simulate the speculative domain for registers with immediates anymore since the verifier uses direct imm-based rewrites instead of having to mask, we can also lift a few cases that were previously rejected. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
In 801c6058 ("bpf: Fix leakage of uninitialized bpf stack under speculation") we replaced masking logic with direct loads of immediates if the register is a known constant. Given in this case we do not apply any masking, there is also no reason for the operation to be truncated under the speculative domain. Therefore, there is also zero reason for the verifier to branch-off and simulate this case, it only needs to do it for unknown but bounded scalars. As a side-effect, this also enables few test cases that were previously rejected due to simulation under zero truncation. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Masking direction as indicated via mask_to_left is considered to be calculated once and then used to derive pointer limits. Thus, this needs to be placed into bpf_sanitize_info instead so we can pass it to sanitize_ptr_alu() call after the pointer move. Piotr noticed a corner case where the off reg causes masking direction change which then results in an incorrect final aux->alu_limit. Fixes: 7fedb63a ("bpf: Tighten speculative pointer arithmetic mask") Reported-by: Piotr Krysiuk <piotras@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Add a container structure struct bpf_sanitize_info which holds the current aux info, and update call-sites to sanitize_ptr_alu() to pass it in. This is needed for passing in additional state later on. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Similarly as 6bdacdb4 ("bpf: Fix BPF_JIT kconfig symbol dependency") we need to detangle the hard BPF_LSM dependency on NET. This was previously implicit by its dependency on BPF_JIT which itself was dependent on NET (but without any actual/real hard dependency code-wise). Given the latter was lifted, so should be the former as BPF_LSMs could well exist on net-less systems. This therefore also fixes a randconfig build error recently reported by Randy: ld: kernel/bpf/bpf_lsm.o: in function `bpf_lsm_func_proto': bpf_lsm.c:(.text+0x1a0): undefined reference to `bpf_sk_storage_get_proto' ld: bpf_lsm.c:(.text+0x1b8): undefined reference to `bpf_sk_storage_delete_proto' [...] Fixes: b24abcff ("bpf, kconfig: Add consolidated menu entry for bpf with core options") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org>
-
Linus Torvalds authored
Merge tag 'netfs-lib-fixes-20200525' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull netfs fixes from David Howells: "A couple of fixes to the new netfs lib: - Pass the AOP flags through from netfs_write_begin() into grab_cache_page_write_begin(). - Automatically enable in Kconfig netfs lib rather than presenting an option for manual enablement" * tag 'netfs-lib-fixes-20200525' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: netfs: Make CONFIG_NETFS_SUPPORT auto-selected rather than manual netfs: Pass flags through to grab_cache_page_write_begin()
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple fallthrough pseudo-keywords in places where the code is intended to fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/51150b54e0b0431a2c401cd54f2c4e7f50e94601.1605896059.git.gustavoars@kernel.org/ # v1 Link: https://lore.kernel.org/r/20210420211615.GA51432@embeddedor/ # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jussi Maki authored
Add a test case for using bpf_skb_change_head() in combination with bpf_redirect_peer() to redirect a packet from a L3 device to veth and back. The test uses a BPF program that adds L2 headers to the packet coming from a L3 device and then calls bpf_redirect_peer() to redirect the packet to a veth device. The test fails as skb->mac_len is not set properly and thus the ethernet headers are not properly skb_pull'd in cls_bpf_classify(), causing tcp_v4_rcv() to point the TCP header into middle of the IP header. Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210525102955.2811090-1-joamaki@gmail.com
-
Liu Jian authored
The help information was not added at the time when the function got added. Fix this and add the missing information to its cli, documentation and bash completion. Fixes: db94cc0b ("bpftool: Add support for BPF_CGROUP_INET_SOCK_RELEASE") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20210525014139.323859-1-liujian56@huawei.com
-
David Howells authored
Make the netfs helper library selected automatically by the things that use it rather than being manually configured, even though it's required[1]. Fixes: 3a5829fe ("netfs: Make a netfs helper module") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/CAMuHMdXJZ7iNQE964CdBOU=vRKVMFzo=YF_eiwsGgqzuvZ+TuA@mail.gmail.com [1] Link: https://lore.kernel.org/r/162090298141.3166007.2971118149366779916.stgit@warthog.procyon.org.uk # v1
-
David Howells authored
In netfs_write_begin(), pass the AOP flags through to grab_cache_page_write_begin() so that a request to use GFP_NOFS is honoured. Fixes: e1b1240c ("netfs: Add write_begin helper") Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/162090295383.3165945.13595101698295243662.stgit@warthog.procyon.org.uk # v1
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.13-2021-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool fixes from Arnaldo Carvalho de Melo: - Fix 'perf script' decoding of Intel PT traces for abort handling and sample instruction bytes. - Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit to Intel PT 'perf script' decoder. - Fixes for the python based Intel PT trace viewer GUI. - Sync UAPI copies (unwire quotactl_path, some comment fixes). - Fix handling of missing kernel software events, such as the recently added 'cgroup-switches', and add the trivial glue for it in the tooling side, since it was added in this merge window. - Add missing initialization of zstd_data in 'perf buildid-list', detected with valgrind's memcheck. - Remove needless event enable/disable when all events uses BPF. - Fix libpfm4 support (63) test error for nested event groups. * tag 'perf-tools-fixes-for-v5.13-2021-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf stat: Skip evlist__[enable|disable] when all events uses BPF perf script: Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit perf scripts python: exported-sql-viewer.py: Fix warning display perf scripts python: exported-sql-viewer.py: Fix Array TypeError perf scripts python: exported-sql-viewer.py: Fix copy to clipboard from Top Calls by elapsed Time report tools headers UAPI: Sync files changed by the quotactl_path unwiring tools headers UAPI: Sync linux/perf_event.h with the kernel sources tools headers UAPI: Sync linux/fs.h with the kernel sources perf parse-events: Check if the software events array slots are populated perf tools: Add 'cgroup-switches' software event perf intel-pt: Remove redundant setting of ptq->insn_len perf intel-pt: Fix sample instruction bytes perf intel-pt: Fix transaction abort handling perf test: Fix libpfm4 support (63) test error for nested event groups tools arch kvm: Sync kvm headers with the kernel sources perf buildid-list: Initialize zstd_data
-
- 24 May, 2021 10 commits
-
-
George McCollister authored
Also enable phy errata workaround on 9567 since has the same errata as the 9477 according to the manufacture's documentation. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Skripkin authored
Syzbot reported memory leak in smsc75xx_bind(). The problem was is non-freed memory in case of errors after memory allocation. backtrace: [<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline] [<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline] [<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460 [<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728 Fixes: d0cad871 ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Cc: stable@kernel.vger.org Reported-and-tested-by: syzbot+b558506ba8165425fee2@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
George McCollister authored
Commit 2e9f6093 ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info") added the following which resulted in -EINVAL always being returned: if (skb->mac_len < sizeof(struct hsr_ethhdr)) return -EINVAL; mac_len was not being set correctly so this check completely broke HSR/PRP since it was always 14, not 20. Set mac_len correctly and modify the mac_len checks to test in the correct places since sometimes it is legitimately 14. Fixes: 2e9f6093 ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info") Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Saubhik Mukherjee authored
In cops_probe1(), there is a write to dev->base_addr after requesting an interrupt line and registering the interrupt handler cops_interrupt(). The handler might be called in parallel to handle an interrupt. cops_interrupt() tries to read dev->base_addr leading to a potential data race. So write to dev->base_addr before calling request_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Saubhik Mukherjee <saubhik.mukherjee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vladimir Oltean says: ==================== Fixes for SJA1105 DSA driver This series contains some minor fixes in the sja1105 driver: - improved error handling in the probe path - rejecting an invalid phy-mode specified in the device tree - register access fix for SJA1105P/Q/R/S for the virtual links through the dynamic reconfiguration interface - handling 2 bridge VLANs where the second is supposed to overwrite the first - making sure that the lack of a pvid results in the actual dropping of untagged traffic ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
When running this sequence of operations: ip link add br0 type bridge vlan_filtering 1 ip link set swp4 master br0 bridge vlan add dev swp4 vid 1 We observe the traffic sent on swp4 is still untagged, even though the bridge has overwritten the existing VLAN entry: port vlan ids swp4 1 PVID br0 1 PVID Egress Untagged This happens because we didn't consider that the 'bridge vlan add' command just overwrites VLANs like it's nothing. We treat the 'vid 1 pvid untagged' and the 'vid 1' as two separate VLANs, and the first still has precedence when calling sja1105_build_vlan_table. Obviously there is a disagreement regarding semantics, and we end up doing something unexpected from the PoV of the bridge. Let's actually consider an "existing VLAN" to be one which is on the same port, and has the same VLAN ID, as one we already have, and update it if it has different flags than we do. The first blamed commit is the one introducing the bug, the second one is the latest on top of which the bugfix still applies. Fixes: ec5ae610 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Fixes: 5899ee36 ("net: dsa: tag_8021q: add a context structure") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
One thing became visible when writing the blamed commit, and that was that STP and PTP frames injected by net/dsa/tag_sja1105.c using the deferred xmit mechanism are always classified to the pvid of the CPU port, regardless of whatever VLAN there might be in these packets. So a decision needed to be taken regarding the mechanism through which we should ensure that delivery of STP and PTP traffic is possible when we are in a VLAN awareness mode that involves tag_8021q. This is because tag_8021q is not concerned with managing the pvid of the CPU port, since as far as tag_8021q is concerned, no traffic should be sent as untagged from the CPU port. So we end up not actually having a pvid on the CPU port if we only listen to tag_8021q, and unless we do something about it. The decision taken at the time was to keep VLAN 1 in the list of priv->dsa_8021q_vlans, and make it a pvid of the CPU port. This ensures that STP and PTP frames can always be sent to the outside world. However there is a problem. If we do the following while we are in the best_effort_vlan_filtering=true mode: ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan del dev swp2 vid 1 Then untagged and pvid-tagged frames should be dropped. But we observe that they aren't, and this is because of the precaution we took that VID 1 is always installed on all ports. So clearly VLAN 1 is not good for this purpose. What about VLAN 0? Well, VLAN 0 is managed by the 8021q module, and that module wants to ensure that 802.1p tagged frames are always received by a port, and are always transmitted as VLAN-tagged (with VLAN ID 0). Whereas we want our STP and PTP frames to be untagged if the stack sent them as untagged - we don't want the driver to just decide out of the blue that it adds VID 0 to some packets. So what to do? Well, there is one other VLAN that is reserved, and that is 4095: $ ip link add link swp2 name swp2.4095 type vlan id 4095 Error: 8021q: Invalid VLAN id. $ bridge vlan add dev swp2 vid 4095 Error: bridge: Vlan id is invalid. After we made this change, VLAN 1 is indeed forwarded and/or dropped according to the bridge VLAN table, there are no further alterations done by the sja1105 driver. Fixes: ec5ae610 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
The driver continues probing when a port is configured for an unsupported PHY interface type, instead it should stop. Fixes: 8aa9ebcc ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
If any of sja1105_static_config_load(), sja1105_clocking_setup() or sja1105_devlink_setup() fails, we can't just return in the middle of sja1105_setup() or memory will leak. Add a cleanup path. Fixes: 0a7bdbc2 ("net: dsa: sja1105: move devlink param code to sja1105_devlink.c") Fixes: 8aa9ebcc ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Unlike other drivers which pretty much end their .probe() execution with dsa_register_switch(), the sja1105 does some extra stuff. When that fails with -ENOMEM, the driver is quick to return that, forgetting to call dsa_unregister_switch(). Not critical, but a bug nonetheless. Fixes: 4d752508 ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Fixes: a68578c2 ("net: dsa: Make deferred_xmit private to sja1105") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-